JEEP EARGASM - The MEANEST Jeep You've Ever Heard!

[@mattbrown4477]

Kevin, Brit, y’all are the luckiest people to have found Chris. You three together are amazing and Chis.. your fab skills and knowledge is top notch. Lite Brite is my favorite KZbin channel

[@LiteBrite]

❤️😁🤙

[@jbcoker]

Chris, Lite Brite is so lucky to have you. Hope they are treating you right (of course they are).

[@TJ_and_The_Mity_200]

So glad Chris is apart of the Lite Brite family, Dude You are Amazing. Can't wait for this build to finish So you can start on Your Beast. Take care Lite Brite Nation family love from The Land Down Under 😘 😘 😘

[@Brad-2015JKURubicon]

Wow! My 7 year old son and I just watched this video. He loved it! He told me to play it again and cast it on our big screenTV so we can hear it on the Bose sound bar. He now wants me to make my Jeep sound like the Stepchild. Great job, Chris!

[@trjnsd6874]

Chris - you are amazing and talented! So many twists and turns! Too bad it couldn't just have true dual exhaust down each side. Kevin, you look like a kid in a candy store at Christmas again! Close-up on Brit's mouth - priceless! StepChild has always been the best build and most capable for all occasions Jeep JL out there. LiteBriteNationIsExhausting!

[@Minnesota_Vance]

"Yeah, Yeah, Yeah, They watched the whole video, start the damn thing!" LOL😆

[@joshodell6703]

Wow what a job done by chris that exhaust is absolutely insane.

[@ronaldspins]

One of the greatest engineering videos ever .Chris

[@jeffwirtanen5125]

Lite Bright you have one of the best mechanics in country with you your very fortunate GodBless and Keep You All❤

[@shannoncrane838]

Hell yeah!!!!!!! Chris does amazing work!

[@christopherharrell8056]

Saw the stepchild yesterday and it looks amazing!! Chris is truly the mad scientist !!

[@richsmith3120]

Chris the mechanical wizard doing his magic again! Sounds great! Happy Trails to all at LBN!

[@utha5034]

I love watching Chris build. So nice. And that sound!!! Sweet. I want to hear a ‘tunnel test’… haha!

[@PiDsPagePrototypes]

So glad to hear Chris's comments on the Cat's. Modern units do not slow down the exhaust flow. If anything, they give the gases an extra volume to expand into, allowing them to slow down without impacting the performance.

[@joecat101]

The open exhaust sounded like the engine was reeving higher RPM's and was definitely getting there faster. Great job Chris, you are the greatest asset in the whole shop. Be well all.

[@joshbuck5877]

Ya you about blew my phone speakers to the f***n moon 🤣🤣 great job chris sounds amazing 👏

[@joeym2675]

Awesome Job Chris!!! Talent, Skill And Knowledge Are Some Powerful Tools To Have In The Old Hat Rack!!! 😂 Sounds Great! Even with the valves closed it sounded really good! 👌👍🫶🔥

[@joecantrell7489]

Nice job Chris!! Sounds amazing!!

[@StormbornJKU]

If it was me I would have done a dual exhaust with mufflers on each side. But I prefer a quiet exhaust. You couldn’t do that with how Kevin is and what he wants lol but it’s definitely pretty sick! Super custom which is badass!

[@indojeep2623]

That is awesome. Sounds like Chris did some really good work!

[@JoshuaPawley]

I have a 66 cj5 with a dauntless oddfire V6 with headers and glass pack u talk about loud can't even hear my stereo love it and that hemi sound great good job chris

[@johnperun232]

Chris did a awesome job with the exhaust, he is skilled Thanx for Sharing this Great Content Have a Great Day 👍

[@mikemullay5622]

Chris you are one of the most talented builders and fabricators out there. I love watching you work and build and design. 🙂🙂

[@blackbeard3674]

Lol love Kevin’s wide-eyed reaction, “ahhbludlblabladba” 😂😂

[@1a1u0g9t4s2u]

Chris is one of a kind. Which is crappy for the rest of us. Only room for one King of the Mountain. Thanks for sharing.

[@pennypackmtb2542]

So cool. Wish you had made this video before I built my exhaust. There's a lot of great content here. Chris, you're a master. I have no comment about Kevin getting a big package. I'll just leave that alone.

[@tdawgnok]

Oh that sounds amazing! Can't wait to hear and feel it in person. Now you have me wondering what my 3.6 v6 would sound like with a magnaflow exhaust. Not that good, but better than the stock super quiet no thrills sound.

[@LTUSATV]

I have a custom exhaust on one of my JK's that has a 3.6 with the factory silencer deleted and a magnaflow muffler, not dual. Sounds a lot better than stock but oddly the 3.8's sound deeper.

[@marcfox622]

I'm with you Kevin, I also like catalytic converters for the same reasons you do. I'm a little different on exhaust systems though, I prefer a performance minded single exhaust over a dual exhaust system. Makes for a simpler system and can perform as good as any dual system. I do like the sound of Flow Master. Paul Cox on Fab Rats uses Flow Master and love the sound his wrecker has.

[@johnbrill1971]

That sounds so good with the open exhaust and Chris is awesome getting all that under your Jeep. Great video!

[@rjfreimuth]

The surprised look on Kevs face when he opened and revved it was classic.

[@cesarquintanilla1264]

That sounds so good. Congrats to Chris. Great job. Take care God bless

[@marvellousmarvin]

Great job Chris

[@truckinleprechaunscottcask9747]

Chris you're a f*cking monster with your abilities! Great job as always on the work you do for Lite Brite!

[@speedball10169]

Kindig-It Designs has been doing a slightly different version of that exhaust option on a lot of their hot rods for years now

[@alleneveland6466]

Your amazing Chris! Thank you for passing along your tips and tricks along the way. You make it look effortless.

[@highplainsdrifters307]

Fantastic work Chris!

[@LTUSATV]

I've been wanting to do a cut out on my Hemi for a while... now I definitely do!

[@tumbleweedking5668]

The neighbors are thinking maybe they'll grow up someday. Kevins thinking I'll slow down a little when I'm 80.

[@TheJosesrt4]

Chris you killed it once again!🤙🏽

[@edwardwd3zk]

Years ago I removed the dual tailpipes and dual stock mufflers and installed dual thrush mufflers without tailpipes . It sounded bad ass On my 1977 k5 blazer 4x4 400cu inch 4 barrel carb .

[@cameronhoover7561]

Nice chris cant wait to see you guys Saturday 👌👌

[@donashcraft8617]

Nice! I went with a metallic substrate 200 cell cat when I put my exhaust together. It is really great to see advocate for using cats. Cheers!

[@drewgayle8325]

good going Chris

[@Smokeroux]

Great Design and Sound!🏁 thinking of adding “Sport Mode” and rear pipes to our Scrambler. 🏁

[@Casey250]

Please send one up here please so I can add a little whine to the growl lol

[@GrayWorm]

Love the way it sounds in both modes...Chris, you knocked it out of the park!

[@neilkirkes]

I know the microphone can’t pick up the true sound of it being in person, but that sounds awesome anyway. Do you think that the reason the open sounds so good, is because there are actually 2 exhaust notes together per se? Like 2 voices in a duet, like they used to sing back in the day. Great job Chris for packing all that in such a difficult space. You are the man.

[@shawncharles3765]

Just left the Jeep Invasion, unfortunately by the time we found Magnaflow you all were gone but Stepchild looks awesome! Great job on the shocks Chris!

[@rafhonda2011]

Oh mannnn that thumb nail hurt me 😅😂😂 where is the coil overrrrrr

[@blzn77]

After watching a ton of your vids, I'm not sure where you found Chris, but I'm pretty sure you had him made at a robot factory. Lol, seriously, kudos to Chris. He is an amazing auto architect. 🤙👍

[@gregcooper2739]

That is one sick sounding JEEP!! Great Job Chris!

[@paengsolo2047]

You've nailed it Chris, what a sound.

[@JustinKingOffroad]

that sounds freaking amazing!

[@CJLane-62]

Playing catch up again, and Damn that sounded Great, Recently Retired and I know Chris is probably out of my price range, but some how,some way I'll fiqure a way that he can work on my XJ, as Chris is a FREAKING GENIUS in my Book at Working, Fabricating, Ect.ect on Vehicles! Great to see Ya'll back playing with the Stepchild! ❤❤🇺🇸🇺🇸🇺🇸

[@mrnine324]

That is GLORIOUS!!!

[@tylerbuhite5432]

Chris in the background with the ( look what ive done face ) LMFAO. So great, such gold as always. :)

[@rockercover]

Very interesting information about exhaust gas velocity through the Jeep pipe-path. 🏆

[@Craig-ml8nw]

Obi-Wan Chris NAILS IT again! Love watching Master Chris do his magic!!

[@michealanneshensley1041]

Hopefully one day I will hear that exhaust and be able to drool over it in person

[@jamieodom7081]

Chris you do great work at everything you touch.. Keep up the great! And get your rig done and get out there and enjoy the fruits of your labor…

[@mauriciohenao6590]

Great job, Chris 👏

[@paulmartin769]

Wow. I was jealous and shopping for one until I saw this video.......that took some real skills. I will have to wait for the lego version.

[@TroutandTacos]

Chris is a GOD.

[@michaelsickels7600]

Great job, Chris! Truly stunning sounding from the phone.

[@rachelbrinkley3240]

Lets face it Chris is the Rockstar of this channel

[@mickmccard]

Great grin Chris!

[@edwardsimmons3721]

So much work. Great work.

[@p4th0s_]

i'll be honest, it actually does sound like a LS3/LS7 with an open exhaust. You could put the vette near it and rev one after the other and it would be so similar.

[@davidbartlett5604]

So Kevin spilled the beans and said he sold the Ferrari? Step Child does sound sick though!!!!

[@LiteBrite]

🤫

[@emilevoyer123]

THANKS FOR THE VIDEO

[@ethankulp4035]

ngl was half expecting them to go with headers straight out of the fenders dirt track style

[@fantaorcrush854]

Come to Chris’ custom exhaust shop! We baffle your neighbors with our tricked out exhaust. When they need a wake up call, hit the switch and make their eyes twitch!

[@MrBillsfishin]

Had to put the headphones on to get a better idea of what it really sounds like... Oh my... Insane. CHRIS!!!!! THEY OWE YOU STEAK DINNER SIR! 🤣

[@caryrichardson338]

You’ll want to protect the Atlas site tube from all that heat. My 392 started to melt mine and I even had my tube flipped inward.

[@felmerdudd7743]

That sounds rowdy! 👌

[@MrRaymora07]

Chris you are a bad ass. Nice work

[@kenadams2799]

Chris. You are an amazing fab pro. Keep it up. You could work for yourself.

[@brandonsearle990]

Well done chris

[@Yeeyee_jeeps]

Sounds great! Aren’t the tailpipes in harms way?

[@garretlewis4103]

The exhaust turned out really well. Chris you make it look easy! Yes, I know it isn’t.

[@getlosttoday4045]

Tastefully done!

[@the_butcher97]

Chris is a legend.

[@johnrpizzaguy]

There’s a reason for Cats and like you said todays motors were designed with Cats in mind, but what do I know as a 39 year master mechanic.

[@devarskinnee8760]

What happened to Jammie Chris?we miss her talent's and pretty smile! Come back Jammie come back,we miss you girlfriend.lovedevo on the block.

[@68061678]

Did y’all look at valvetrinic mufflers, the actuator is built into the muffler

[@OffroadCpl]

Seen you last night cruising the strip. We went to windrock by ourselves.

[@tetra4411]

Great content. 100 times better then anything Disney could produce.

[@LonnieHutchinson90]

DAMN that thing sounds Badass!!! And how dare you tell us the shocks came in and didn’t show us lol

[@tomasgilbert9491]

That sound is normally reserved for Lamborghini, Ferrari, McLaren . You might want to patent that design.

[@mattmcdonough707]

I would love to see some “ Old school fender headers” with side pipes as Rick rails !

[@timf6916]

Good job young man.

[@ronnie5669]

they make muffler that has bypass in it. they operate off vacuum and put the switch inside

[@RCCrawlerz209]

You guys are gonna turn this jeep, into the most meanest, most baddest, bad ass jeep ever! Lol Gonna be pretty dope! 🔥🔥🔥🔥

[@danielcolantuono9824]

Wow that sounds awesome great job

[@steveschilling5966]

They make a muffler with a built-in bypass active valve that would work.

[@angelmtz4you]

Chris you should start your own channel man, definitely a subscriber 🙏🏼

[@norcoredneck]

Gotta hit Mt Carmel tunnel when it’s on the road.

[@dirtberger4533]

Dang. Nice job. Ps. Don't let the customer Kevin order his own parts,lol. No warranty if Kevin orders the parts, that's how we always did it.

[@jimpawlak7806]

gee...ya better stop before ya break it ...again.... haha

[@SeriousSchitt]

Just a couple of questions guys. 1: Just exactly who’s child is the ‘Step Child’, is it Kevin’s or Britney’s? 2: LS, Kevin said. What cog sack and transfer case are you guys running in that thing? Thanks.