Not being suck up here, but I think this is the best video you've done. All the close-ups really helped me to understand the full process of removing the axles. Makes me think I could actually do it myself when install an locker on my 3.7L.
@cudaguy74 Жыл бұрын
Thank you very much, changing emergency brake plates and assembly and didn't realize the axles have to come out. Different job but you absolutely saved some headache on how to navigate pin and clips in rear end. Thanks again...
@dougtuber Жыл бұрын
Great video and very helpful... in process of replacing rusted out backing plates with brake assemblies on both sides of a 2008 Jeep liberty and the is the first video I could find that told me clearly about how to take apart the differential. Thanks sooooo much! Here I go! :-)
@3613jeremy3 жыл бұрын
Seeing and hearing your Great Dane whining & crying had me tearing up god I miss my boy great video
@alexislopez79216 ай бұрын
Very informative video I understood every step even though I’m not doing the job, it’s really fun watching others work and I be able to learn thank you!
@JG-nk7ld2 жыл бұрын
Awesome Video!! Would not have even known where to start and this video made it completely simple.
@bombtrak153 жыл бұрын
You saved me a huge headache, thanks for this vid, 👍.
@DOOM171510 ай бұрын
This was a very detailed video. Great job man
@thenonbygone2 жыл бұрын
This is the best vid I've seen on this thank you!!
@michaelbariso31923 ай бұрын
I had the same leaky axle aeals, I added a 50/50 mix of stop leak and saw dust, it's been 5 years and still no leaks, you did all that work for nothing!! 😉
@carloslewusz89835 жыл бұрын
Thanks. Excelent vídeo and explication. I have liberty 2007 . Greetings from Venezuela. God bless.
@greenbayfavre9552 Жыл бұрын
Me gustó mucho tu vídeo y me ayudó a mejorar mi diferencial
@mrpzlee6 ай бұрын
Great video, thanks for sharing
@niterbum5 жыл бұрын
awesome video guys im removing axles for access to fix backing plate
@CC-qw5ps4 жыл бұрын
hello super video. I wanted to know if after winding up you have a light games (when you pull pushes the wheel towards be) about 1 mm because on my vehicle I have this games but the bearings are impeccable and I have no leak to the bridge . thank you to you
@DomVito87 Жыл бұрын
thanks so much for this video!
@2020-g8s4 жыл бұрын
Great video. Same problem with my liberty
@recepgokkaya6602 Жыл бұрын
hello, great vid ! have this type jeep kj axle rear inner seals? thx 😅
@rafaelvasquez35662 жыл бұрын
Where do you buy those parts? Most auto parts are easy money driven and don't have specialty parts.
@JoseLopez-bm5bf4 жыл бұрын
You should mention what tools you use
@robertlombardi40454 жыл бұрын
Are you still working on the Diesel engines
@experttrolltrollingdirty20625 жыл бұрын
What is the rear axle on a kj? D30 or 8.25 or niether?
@XStuntManiac4 жыл бұрын
8.25 on all KJ's I believe, if you are still interested in it.
@adamboyd77485 жыл бұрын
Thank you I got the same problem on my Jeep.
@experttrolltrollingdirty20625 жыл бұрын
Iv just had same problem fixed on mine plus new clutch
@joenorris4495 жыл бұрын
When replacing the diff oil, hope you added the Mopar anti-friction additive our you will be doing this again soon.
@niterbum5 жыл бұрын
what is the anti friction additive?
@joenorris4495 жыл бұрын
@@niterbum If you check say a Haynes repair manual or maybe the owners manual it will tell you what additive to add if any; on my 2006 liberty when i replaced the gear oil (diff oil) it called for an additive. When changing the axle and pinion seals I used the additive as called for most times by the manufacturer. Here is an example; again depends on the make, model, type of axle you have as to if you need an additive or not.www.ebay.com/p/Mopar-Limited-Slip-Additive-4318060AD/1341858125?iid=320949080974&chn=ps
@niterbum5 жыл бұрын
thanks Joe i was at the parts store and all they had was a synthetic 75w-140 gear oil with the additive already in it, the owners man says 75w-90 syn or if trailer towing, 75w-140syn. and to use the additive with models equipped with the "Trac-Lok" tm
@davidgcavada Жыл бұрын
🍻
@thurgogopro53384 жыл бұрын
The filler hole is not the level.it should be lower than that
@eugenecampos31856 жыл бұрын
hi mr how fix head gasket 2005 liberty crd 2,8 tank you
@andycheatle17326 жыл бұрын
Another VM Motori engine shits it's pants...
@thomaskeim61324 жыл бұрын
should of changed out the park brake shoes right away
@andreasnik5 жыл бұрын
сначала полуось в манжету не очень хорошо зашла да?