Jeep Liberty Transmission Fluid and Filter Service - AMSOIL Signature Series Synthetic ATF

This video demonstrates a transmission fluid and filter service on a 2006 Jeep Liberty. Regular fluid and filter changes are a good way to keep your equipment lasting as long as possible.
Check out the links below for more information on AMSOIL products.
Thanks for watching! Please subscribe for more.
AMSOIL Transmission Fluid
www.amsoil.com/shop/by-product...
AMSOIL Metal Protector:
www.amsoil.com/shop/by-produc...
More info on AMSOIL Products and download the AMSOIL product catalog:
www.midwestsynthetic.com
AMSOIL Gear lubes: (The Easy-Pack works great for filling differentials)
www.amsoil.com/shop/by-product...
Purchase AMSOIL products online:
www.amsoil.com/StoreFront/defa...
AMSOIL Transmission Fluids
www.amsoil.com/shop/by-product...
Vehicle lookup and cross reference guide
www.amsoil.com/guides.aspx?zo=...
Save money with AMSOIL Preferred Customer Program!
www.amsoil.com/offers/pc.aspx...
Have a business? Contractors, farmers, truckers. Information on AMSOIL commercial counts here:
www.amsoil.com/business-opport...

[@mrjuvenalify]

Per the service guide, before installing 2nd bolt on Driver Side, the oil pan bolt in the bolt hole located between the torque converter clutch on and U/D clutch pressure tap circuits, it will be necessary to replentish the sealing patch on the bolt using Mopar Lock & Seal Adhesive. Here you can use Loctite Threadlocker Blue or Permatex Medium Strength Threadlocker Blue.

[@ryanwilson6162]

BY FAR the best how-to video on the subject. Thanks so much!

[@midwestsynthetic]

Thanks for watching! I appreciate the comment!!

[@anthonyhitchings1051]

Well done - thanks so much for pointing out the special treatment of bolt #5 (as its called in the shop manual)

[@midwestsynthetic]

Thank you for watching! I appreciate the comment!!

[@pjfan173]

Great video

[@DocHoliday-to6kp]

Thanks for the helpful video. Early liberty's with 45RFE trans (2002, early 2003) have a different type filter (metal) and o ring, it is enclosed in a metal base that must be tapped into valve body without distorting it, most people use seal driver or socket that matches outside diameter to insert it, lube it with fluid, be sure to remove old one first, just a heads up.

[@scorpiodurango6163]

Thank you sir👍🏾

[@midwestsynthetic]

Thanks for watching and leaving a comment !

[@scorpiodurango6163]

@@midwestsynthetic Thank you for giving me the inspiration as a woman to do repairs on my Jeep😅

[@job38four10]

Whats your thought on taking radiator outlet line off while engine running and putting new fluid in to flush out old fluid from torque convertor after filter change? Your the first to explain why sealer on 2nd bolt on DS, thanks for posting!!!

[@midwestsynthetic]

I would just do another drain and fill to get more fluid swapped out. Less mess and risk. Thanks for watching and leaving a comment!

[@Truckinman2000]

I don't think the torque converter holds too much. My daughters pan was leaking to the point it wouldn't shift. I had a nice puddle on the driveway. I replace the pan and refilled with Amsoil OE Atf. It shifts great now. It is rated at a 8.8 qt capacity and I put in 7 qts. In spring I will do a drain and refill with signature series. Thanks for the video Midwest!!!

[@docnrozzie]

2nd from the front driver side bolt needed sealer ??? What. Was that about ~~ a chronic leaker ?? Very good video - THANKS !

[@midwestsynthetic]

That particular bolt hole goes to an oil gallery. That's why the sealant on one bolt. That's for watching and leaving a comment !!

[@ronnielawson]

If you don't mind me asking what kind of sealant did you use on the bolt? Want to make sure I get the right stuff.

[@mattgaming8717]

I used gasket maker to seal it. I thought it was a common bad threaded spot. Though it was stripped prior to work. But will watch it.

[@moiseslelo3491]

I would like to know the quantity (gallon) of transmission oil for the Jeep Liberty 2012 ( Automatic gearbox)

[@midwestsynthetic]

It takes about 5-6 quarts so 2 gallons is needed. Thanks for the question!

[@pamelav.5699]

🌈🦋🌻ThankYou Very helpful to check fluid!

[@robertdoran7387]

Do you have a video for the 2008-2012 KK Version? I have the 2012 and there's no dipstick. Annoying.

[@midwestsynthetic]

No vid, sorry. I've had 3 KJ's but no KK. If you have a tube with a cap, Dorman makes a service dipstick. You'd also need a way to check the trans temp, like a dash gauge or a scan tool that read trans temp, and a chart with the proper level by temp. The proper fill level varies with fluid temperature. Thanks for the question!

[@josephlfrazier9727]

Why does the second bolt from the front drivers side need sealant?

[@midwestsynthetic]

That bolt hole goes into an oil gallery so it needs sealant to prevent seepage around the threads. Thanks for watching and leaving a question!

[@DJ-sy8ht]

With a jeep liberty that has never had a transmission fluid or filter would you? The transmission shifts fine . Never been beating on. Running strong at 315k miles

[@jeffreyyoung4104]

Past time for a change, but avoid those 'fluid flush' at the ripoff oil change places!

[@bobgil3464]

Would the Blue Tread locker work for the #2 Pan Bolt?

[@midwestsynthetic]

It would be best to use a sealant. I used Permatex high temp thread sealant on 3 different Jeeps with the same transmission with many fluid swaps over the years and it worked fine. The Chrysler recommended product is called Mopar Lock & Seal.

[@sanmina3]

Do you use a sealant around the pan edge and on the gasket where it mates with the transmission?

[@midwestsynthetic]

I use a good gasket (no sealant) that comes with the filter. I've seem some pans with RTV only, which probably is OK if you don't get extra inside the transmission, although it would probably get picked up by the filter. The new gasket is most likely going to be folded and stuffed in the box with the filter so it's good to flatten it before use. Thanks for watching and leaving a question.

[@sanmina3]

@@midwestsynthetic Thanks. I'm going to do it without sealant as I've tried twice with RTV and the ATF-4 seems to attack the silicone. The gasket is similar to rubber so should flex as needed without springing out and leaking.

[@MSalahadinAbdulkarim]

What are the best oil for Jeep Liberty

[@midwestsynthetic]

The best is AMSOIL Signature Series in the appropriate viscosity for your particular engine. Thanks for the question!

[@garyfox4622]

I have heard the engine dipstick will read correctly for the transmission. Is this correct?

[@midwestsynthetic]

Absolutely NOT!! The transmission dipstick (if there is one) is a dealer item specific to your VIN.

[@deannebrin107]

I have done this transmission oil change and filter and now the jeep won't move or go in any gear what do I do or check now

[@midwestsynthetic]

Couple things to check, 1. Does it have enough fluid?, 2. Was the filter installed properly? The filter is also the pickup tube so it needs to be installed with the new o-ring that goes where the filter plugs in, and the old o-ring needs to be removed if it didn't come out with the old filter. Thanks for the question. Good luck with your project.

[@bobgil3464]

What ended up being the problem?

[@luispedro7664]

Is this as good as the mopar recommended on the manual?

[@midwestsynthetic]

AMSOIL Signature Series ATF is a top notch product and meets the Mopar ATF+4 spec and any others. Thanks for the question!

[@blueberrythekjericraeder9995]

Do jeep libertys have a shift sianoide?

[@kenmcnair4201]

yes

[@monerreu506]

How many quarts of transmission fluid does it needs after doing service? Jeep liberty 2005 4x4

[@midwestsynthetic]

It will take about 5 quarts.

[@Will_JJHP]

Did you use thread locker on the filter bolts? If so, do you need a high temp thread locker?

[@midwestsynthetic]

No thread lock on the filter. One bolt on the pan needs sealant. Thanks for the question!

[@bobgil3464]

@@midwestsynthetic what brand sealant?

[@midwestsynthetic]

Permatex high temp thread sealant is what was used here. Mopar Lock & Seal Adhesive is the Chrysler product.

[@davekana8388]

My torque wrenches go from 25-250?🤷‍♂️

[@bobgil3464]

You need the smaller wrench. Sucks having to buy two, I found that out.

[@offroad1997]

how many liters of oil goes into a jeep liberty 3.7

[@midwestsynthetic]

About 5 quarts to drain and fill the automatic transmission. 5 liters would be good too. Thanks.

[@offroad1997]

Thank you

[@PhatboyHD88]

Umm thats the wrong fluid for a mopar 42RLE trans for a 2006 jeep liberty. You are to use “ONLY” ATF+4 trans fluid. Just thought id let you know.

[@midwestsynthetic]

I've been using AMSOIL Signature Series ATF in my Jeeps for years. It's a top notch synthetic fluid, and meets the ATF+4 spec, plus many others. This is also great from an inventory standpoint since I can use the same fluid in the transmission, transfer case and power steering in my Jeeps, and my 2008 F150 uses the same for all three as well. Thanks for watching and taking the time to comment. Happy New Year!!

[@TheBeatenPaths]

Car manufactures aren't in the lubricant business, the owners manual likley says the transmission fluid doesn't even have to be replaced.

[@TheBeatenPaths]

How many miles on the jeep? is this it's first change?

[@midwestsynthetic]

I've changed it twice since I've had it, at 83K and 113K (30K interval). It's at about 118K today. No clue how it was treated before but none of the fluids looked too bad when I went through it the first time so the prior owner(s) must have done some maintenance. Thanks for the question and watching the vid!

[@thedavesofourlives1]

@@midwestsynthetic AtF+4 is supposed to be a "LIfetime Fluid" good for over 100K according to the manual.

[@midwestsynthetic]

I checked the 2006 Jeep Liberty manual, It says 60,000 for fleet and towing. No mention other than that. Haynes says 30,000 normally, 15,000 for city, hills, trailer towing. I've been changing the Jeeps at 30,000. A single pan drop and refill replaces about 1/2 to 1/3 of the fluid. This one has a dipstick so it's easy to service yourself. Thanks for the comment!

[@luiznicolau6720]

@@thedavesofourlives1 do not forget when time should be care too. Please!

[@ericnorton8985]

Can I use rtf instead of sealant

[@midwestsynthetic]

I would would stick with the recommended thread sealant (per Haynes: Mopar Lock & Seal Adhesive or equivalent). I don't know that RTV would be a good sealant on the threads and you definitely don't want it in the oil galleries in the transmission. Thanks for watching and leaving a question!

[@williamhorsley7799]

How many quarts of fluid u put back in

[@midwestsynthetic]

It takes about 5-6 quarts to drain and fill.

[@williamhorsley7799]

@@midwestsynthetic thanks

[@terminative]

Doesn't hurt to wear safety glasses and breathe through your nose doing this of work.

[@michaelfraser5723]

JEEP, WHY DON'T YOU FIT DRAIN PLUGS ?