Jeep Wrangler JK Smittybilt XRC Body Cladding - 4 Door Review & Install

Shop This Body Cladding: terrain.jp/2W1...
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Fabricated out of tough 3/16 inch cold rolled steel, Smittybilt's body cladding armor for the rockers are made for the most unrelenting wheeling, shrugging off rocks, stumps, and brush. Smittybilt's proprietary two-stage powder coating defeats all kinds of corrosion and provides a slick surface that shrugs off glancing impacts.
This body cladding shields your rocker panels, defending them from vegetation, rocks, and earth banks alike. These extra sturdy armor pieces can be matched up with XRC Rock Sliders to gain outstanding lower quarter panel protection.
These Smittybilt armor components come with button head hardware manufactured out of 304 marine-grade stainless steel. terrain.jp/2W1...
Item J17694
MPN# 76887
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
Subscribe for Daily Jeep Videos: terrain.jp/Subs...
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/...
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterr...

[@extremeterrain]

Shop This Body Cladding: terrain.jp/2W1SXsv Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@AngelMorales-uu5ll]

I did buy this cladding but I didn't drill any holes. Took some time to weld each stainless steel bolt cut smooth on the side that's on the body, painted the raw spots from grinding, used a scrub pad to scratch up the surface, cleaned up with acetone, applied auto 3M double sided tape, clean Jeep sides with acetone, and pressed on. No holes drilled. I'm not rock climbing, on for aesthetics only. drilled holes = Rust!

[@algarinthompson8749]

Nice job, but there will be major rust in a few years. All the holes have bare metal exposed,

[@bg5561742]

It will be fine

[@DHandyFamily]

I added rust-o-Leum paint inside also used ultra black rtv sealant inside before inserting the nutserts. Been 6 years now and no rust lines.

[@abmtnbkr]

I’m late to the party as usual. 😊 I’m planning to pick these up but wanted to check out the video first. Nicely done Merideth! Now I’m wondering if she’s still there..

[@izellleneau7268]

Excellent video

[@extremeterrain]

Thanks for watching! -Zach

[@rodrigocajas166]

Awesome video . Look nice on the jeep.- parts and tools was $201.45.- on ebay!!!!! Keep going girl!!!!!!! 👍🏻👍🏻👍🏻👍🏻👍🏻

[@clos1764]

42 holes! I would probably mess up most of them. Nice job, looks good.

[@bg5561742]

I tell you what I just put these on and that shit was hard it took me all weekend

[@hiphopcroaks24]

Just picked mine up second hand idk why she says they're not a solid build because they're thick steel and will definetly protect you jeep however you do need some type of slider to go with these to protect the bottom. I'd still pick these over any others tho because if you get ones that protect the bottom as well then you don't have enough space to put your sliders or steps on. With these you can choose whatever sliders/steps you want

[@Bay-Smidt]

Every time I see #Merideth I want to buy something - it's going to be damn expensive :-)

[@ctr_1602]

Will there be ones for the JL?

[@jonpavlik501]

What is a nutsert tool?

[@extremeterrain]

It's used to easily install rivnuts in places where you would not be able to access the back of the fastener. You can check out one we have on our site here --> www.extremeterrain.com/smittybilt-nutsert-tool-1.html

[@Blastfence1]

Never 👎 ever do this to a Jeep!