Jeep Wrangler Smittybilt SRC Cage Kit - 7 Piece - Gloss Black (1997-2006 TJ) Review & Install

Shop This Smittybilt SRC Cage Kit: terrain.jp/2K5I3eR
Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt
Protect yourself and your passengers from serious injury if your Wrangler rolls over with this Smittybilt 7 Piece SRC Cage Kit that reinforces the Jeep's stock roll bar. This cage kit is constructed out of .120 Wall DOM tubing that has everyone covered in the Jeep. terrain.jp/2K5I3eR
Item J17529
MPN# 76900
Strength and Reinforcement. No hardcore off-road Jeep is complete without a reliable roll cage. Stay away from the welding and the drilling and get yourself a better and stronger Smittybilt SRC Cage Kit. This is a 7-piece steel tubing kit that will reinforce the factory roll bars. The Smittybilt cage kit is also compatible with factory and aftermarket soft tops. It doesn’t hurt this roll cage is also one of the most stylish you can buy. It further defines the rugged and go-anywhere look of your Jeep while protecting you and your passengers in case of accidental roll overs.
Rigid Construction. While a roll bar will amp up the sporty looks of your Jeep, it is primarily designed to offer excellent roll over protection. It has to be strong, sturdy, and durable so as not to buckle under pressure. The Smittybilt SRC Cage Kit is constructed from heavy-duty and highly rigid 1020 .120 wall DOM steel tubing secured by grade 10 hardware to offer maximum strength and rigidity. The roll bar is finished in a satin black powder coat finish to provide rugged looks and all-weather corrosion resistance. It even comes with a brilliant 5-year warranty.
Simple Bolt-on Installation. The great thing about the Smittybilt SRC Cage Kit is the simple bolt-on installation. You can complete the job in approximately 3 hours using nothing but basic hand tools. No welding, no drilling, and no cutting required. This roll cage kit is applicable to the 1997-2006 Jeep Wrangler TJ.
----------------------------------------------------------------
Give ExtremeTerrain a follow for the latest Jeep Wrangler news, videos, pictures and content!
SUBSCRIBE at / extremeterrainvideos
Facebook: / extremeterrain
Twitter: / extremeterrain
Google+: www.google.com/+extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your home for the best in aftermarket parts for your Jeep Wrangler JL, JK, TJ, and YJ!
www.extremeterrain.com

[@extremeterrain]

Shop This Smittybilt SRC Cage Kit: terrain.jp/2K5I3eR Subscribe for Daily Jeep Videos: terrain.jp/SubscribeXTyt

[@gparroz3288]

After watching this I’m glad I went with the Rock Hard kit for my LJ. Any additional bracing to the roll cage is great

[@mickeywingnut]

Thanks this really helped the install

[@mattm8950]

You put the final bit of padding in the wrong place. The pads with the individual Velcro straps attaches to the center overhead pieces. You need to out the factory padding back on the side bars. Thanks for the video, it helped a lot!

[@charleswalker7398]

Lol y’all must have had longer bolts than me for the six by the speakers 😂😂😂

[@jeepaz79]

Great kit. But if you love the soundbar and lighting you have to figure out where else to get it.

[@m1977v]

So no sound bar speakers...huh

[@jons3309]

Can I still use my smittybilt gear overhead Mille storage with this cage????

[@RockMauler]

Door surrounds and other plastic trim will require serious cutting so NOT bolt-on by any stretch. Door jam mounting cap bolts will also rub on the doors making a mystery squeak until you peen the door where the heads will have already rubbed the paint off of the metal if you did a test drive. Several of my clamshell brackets had the cap head relief hole seriously offset making it impossible to install before using a moto tool to grind out the mistake. Found 3 such mistakes on two of the clamps. DIY skills will be required. Once installed it is a major upgrade to the safety cage. Serious wheelers will want to add an A-pillar brace to the floor and from the underside of the floor to the frame.

[@johnjamrowski7505]

When you take the 3 bolts out for the door post, why can't you just reuse the factory bolts and clips. Why do you have to remove the clips and use backer bolt plate?

[@sandraruiz3032]

Nice product. Can you still a softtop with the cage?.

[@Jeep482]

i have an '04 with the speaker pods rather than the sound bar, will they still work with this kit?

[@bradsta9751]

Will this work with a hardtop?

[@madisonjeter845]

Anyone know what color that is??

[@brianflad9627]

This video needs some work. There is no way the crossmember beam will perfectly line up when both of the side pillars are bolted down. Connect the cross beam to both pillars but don’t fully tighten. This will align both sides. Once it’s all bolted in tighten up. I followed this video and the cross beam was over an inch out of whack on one side. Overall great kit for the money. I might need a 1.5 inch sear riser now the cross bar definitely obstructs visibility.

[@NoahSham]

Can you still lay the windshield down with this kit?

[@brunopacheco2483]

No

[@chrisdesrui]

How does door surround reattach?? does it fit between clamps??

[@johnjamrowski7505]

I have the poison spider 🕷 trail cage. For the sound bar I just made two cut outs for the roll cage bar. Cut the cloth material right down the middle where you are going to cut the sound bar. The material will just fit itself when you put the sound bar back in. It looks OEM finish when your done.

[@rnrmeier1983]

Would this fit my Jeep YJ aswell or only TJ

[@extremeterrain]

This specific cage kit is for Jeep TJ's only, sorry! -Zach

[@MR-rw4xp]

Both of you guys are called Ryan Houck interesting.

[@extremeterrain]

Actually, one is Ryan Houck and the other is Ryan Huck! Funny how things work though. 😅 -Zach

[@thatchersandow4139]

Seems a bit different than our normal Ryan

[@johnharrelson7537]

Is there any way to modify this kit to make the sound bar still able to fit?

[@scottkinderdine3317]

That's a great question I'm calling them now to find out. I called Extreme Terrain and they have kits so you can modify it so you can. But otherwise No.

[@TheJohnnyairgun]

Yes, save your $ and keep your sound bar. This seems like a waste of $ to me when you could weld on some extra bars. Im not planning to roll mine tho. Be safe!

[@tylerdurden4770]

The sound pods from my 2006 fit and work fine.

[@ljtimmy2621]

Buy some roll bar marine speakers.. call it a day stop complaining 😄

[@moparlover1968rr]

He likes the look of a bare cage but prefers the vegetable garden in the medical facility after a roll over or wreck lol

[@Godhorse6969]

someone needs to teach you how to use an allen wrench

[@moparlover1968rr]

Jon c it looks like he completed the job and didn’t even know how to use an Allen wrench according to you! LOL

[@ryanl4931]

That music is killing me