Install Windows 10 on an iMac without Bootcamp Assistant

In this video I will explain how to install Windows 10 on an Apple iMac late 2015 without using Bootcamp Assistant. This method can be used to install both only Windows on your iMac or to create a dual boot with macOS and Windows or in case you experience issues using Bootcamp Assistant.
In the video I will explain how to:
1) Create the Windows installation media and get the drivers using Brigadier
You can find Brigadier on Github: github.com/tim...
2) Partition the disk for dual boot if you want macOS and Windows to co-exist
3) Install Windows 10
4) Install the necessary drivers and updates
5) Explain how to switch between Windows and macOS and choose which one to boot by default.
Background music:
------------------------------
Track: Down The Hill - Vendredi [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Down The Hill - Vendre...
Free Download / Stream: alplus.io/down...
------------------------------

[@silogaming6840]

TYSM!!!!! Your video was so helpful! I’ve been trying for almost a week now, but I kept on getting an error on Bootcamp, so thank you for the guide to install Windows without Bootcamp! Now I can finally play Windows games on my Mac :)

[@Jimbo68]

hi, were you getting an error about failing to partition the disk?

[@tfcstopmotion2228]

are you able to play windows steam games with this?

[@lucylu4901]

we have the same reason to downward it hhhh

[@thekakashi100]

The only tutorial that saved me , thank you brother , running catalina and windows 10 on macbook pro 2009

[@thekakashi100]

i installed in my macbook pro , installed drivers everything ok , but when i press alt the windows is not in there in startup

[@lagjiahumoriste]

​@@thekakashi100 update bootcump drivers

[@ScientificJuvenile]

My old MacBook pro which was collecting dust has been repurposed for my son who needs it for engineering because of this video, you are the g.o.a.t. man, keep up the good work!

[@Axlx777]

I need help! After installing windows 10 everything works fine but when you restart, it does an automatic repair and wont boot! So what i did is reinstall windows again, worked fine but when i restarted it.. same problem. Also when i open up the boot camp from the usb it says its not supported on this device. What do i do?!??

[@manavaildasani2098]

Did you get a fix? Same issue :(

[@Axlx777]

@@manavaildasani2098 nope. Took the ram out and threw the thing away. Dont waste ur time with apple. They suck hard

[@Axlx777]

@@manavaildasani2098 seriously though. Dont waste ur time. Ive tried EVERYTHING and nothing works. Apple does NOT want windows on there systems. So there are always bound to be problems

[@joanaduraes21]

After erasing the windows partition (earlier created on mac in ms dos format) during the windows installation , it gave me no possibility to click on next and the error says something about MBR structure ; EFI and GPT, any help?

[@hihi-kg2hj]

Everything worked but when I got to the part where you install the setup on boot camp it says that it is not supported by my version or something like that. Also idk if its because of that or not but if I turn it off and then turn it back on it goes to automatic repair so the only way I can use it is if I download windows from my USB again

[@rocketshiftgaming5693]

This happened to me too. I was able to install windows and I got it to install boot camp drivers using the compatibility troubleshooting but when it restarts it takes me to the repair menu and I can’t boot back into windows

[@Sun_Tzu13]

Does it save your data when you reboot?

[@rocketshiftgaming5693]

@@Sun_Tzu13 yes

[@rocketshiftgaming5693]

@@eringuet nope. It ended up making my laptop not have audio at all. Like the red light that shows in the audio jack lights up and I can’t get audio in macOS anymore. So I don’t recommend doing this on older macs but my MacBook Air 2015 worked really well with it and ran windows 11 buttery smooth unlike macOS Monterrey

[@trahmadd]

Just creating windows 10 usb installer using unetbootin

[@Dj_Lanno254]

After straggling with windows installation for eons finally you’ve rescued me. Thanks bro 🤜🏾

[@Ahmadhammash18]

Im running MacOS 10.13, and whenever I try to install homebrew through terminal an error pops up. I thought it was a typo so I checked myself a couple of times and it’s not. Can you help please? Also I’m using an iMac late 2011 so I can’t update the OS to a later software than High Sierra. I should mention also that I tried to make bootable USB through windows 10 using brigadier and whenever I enter the model name which is iMac 12,1 it wouldn’t download any files from the command prompt

[@BayadkolTnd]

Help I'm stuck on the drive partation part wherin I have to select a partation on where to install windows I followed your instructions but after i clicked format on the partation I made I'm unable to click Next PLEASE HELP

[@AhmedKhaTer_UwK]

did you find the solution ?

[@lovemadeinjapan]

Great info! Bootcamp utility is rotten to the bone, as if Apple does not want you to use Windows, I always have the actual install option greyed out with that. So skip it and use this tutorial. I found Rufus to be the preferable way to burn the disc, not Media Creation Tool, as it allows you to store the ISO on some external disk and create installation drives over and over again, not depending on a download for every USB stick creation. Second: Brigadier does not download to the location of Brigadier, but to the user home folder, and the outcome is a DMG, so you have to mount that on a mac and drag the contents to a USB drive.

[@DongTaan112]

later 2022, if you're looking at this vid, there're couple of things not mentioned or doesn't work as follows. here's solution. - You must install 7-zip, without it, the brigadier might not work properly. - So download 7-zip exe for windows and keep it with brigadier.exe - after installing win10 on new partition, install 7-zip first, then move brigadier on a desktop - start cmd, go to desktop and execute bridadier.exe - You DO NOT need to make a dedicated folder such as "imac" for brigadier, since it'll create the bootcamp file. - You DO NOT need to know your mac model number, you BETTER NOT type "--Model" number when execute brigadier. - If you indicate specific model by using "--model #.#" it might download wrong assets - Just execute "brigadier" in cmd, it will check and download what your mac need.

[@sebmotions]

i have imac late 2009 with intel duo core with ati radeon. i need to install windows 10, but i dont know if brigadier will even work. so there will be any issues if i attempt to install?

[@sebmotions]

i dont have windows pc. how i will even able to make dual boot on my usb stick?

[@giovannyperez9300]

Worked perfectly on a 2012 MacBook Pro. Thank you very much!

[@PETERBURNSWILLO]

good to watch hope'in i can set windows on my mac thanks

[@LearnReason]

I keep getting an error when brigadier is Extracting (Error 2 System can not find the file specified) I am stuck there.

[@Joe-if3dk]

same, i have no idea where to go from here

[@LearnReason]

@@Joe-if3dk Download 7zip and istall it and then try brigadier again, the error is that Brigadier is looking for 7zip to decompress the files.

[@Veeguitar]

I dont understand. I have MacBook Pro and I DONT have windows which I am trying to install. How to use Brigadier on my mac??

[@lasu7712]

My Windows setup USB gets stuck and hangs at boot after selecting it from boot+Option/Alt key: I try to install Windows on an old iMac7,1 (2007). But neither the USB disk created by Microsoft Media Creation Tool (so it’s MBR FAT32, like the case in this video here) nor by Rufus (so GPT EFI) could work, both hang at boot. Looking in Disk Util and Startup Disk, they are effectively not bootable. If MAC needs GPT to boot, then why does Boot Camp indicate to create a MSDOS FAT/MBR USB when installing Windows on Mac? I used to work with Windows but not with Mac, does anyone know what I am missing to make that USB boots on MAC? On Windows the USB MBR needs to be Active, does Mac require that and how to set it? Thanks.

[@jensdbe]

An x86-bases Mac can boot in most cases from both MBR or GPT. Maybe try with another USB drive?

[@lasu7712]

@@jensdbe Thanks Jensd! I try those days unsuccessful with different USB sticks as your suggestion. Unfortunately those authentic Sandisk, Transcend, Verbatim still do not solve. I then found in the system that SIP was activated but can't deactivate it: booting to Recovery partition with Cmd-R, or Cmd+S gives some blank errors message on black screen then self-reboots. So currently I still have not found a way to turn off SIP that should be the cause of denying new installation.

[@micdev42]

Thanks very much for this comprehensive and clear video. Really excellent. I've just installed Win 10 Pro on my MacBook Pro 2016 and banished bootcamp forever!

[@abufathi75]

thank you very much.. very clear explanation..

[@jiadongzhang490]

Thank you so much for this. I had worked on this for a few days and now finally solved. Really Good.

[@jensdbe]

Glad it helped!

[@sas999LLJW]

my macbookpro9,1 when doing the brigadier.exe thingy says ''Couldn't find a Boot Camp ESD for the model MacbookPro9,1 in the given software update catalog.'' what now?

[@jensdbe]

You can try to do without downloading the bootxamp package and then install drivers through Windows Update and if anything is missing, add it manually.

[@sas999LLJW]

@@jensdbe if there's is no option to boot to the USB should I give up?

[@quinspranger4880]

when i click on the usb in the boot drive select menu it just freezes. i have used diskpart to clean and format the disck. trying to do boot on 2008 imac 8,1

[@ΓεωργίαΒλασερού]

I have the same problem have you found solution ?

[@VOLTRONDEFENDER4440]

Just to note command key will be the windows key in windows and windows key command key in Mac OS!

[@ShravanNiranjan-v5i]

So I already downloaded and Installed Windows 11 on my MacBook Pro 2016 - one with the Touch Bar. Now I'm unable to download any of the drivers. Anyone here may be able to help me?

[@ashleenaidoo]

Thanks for the great vid, I do have a problem. I have a 2011 iMac and after the initial step of installing the files, it reboots and sits with the Windows logo. I have to manually reboot for it to continue the next steps "Getting Ready" and then it continues. Same issue thereafter for the next boot. Any help on this?

[@fefefefufi]

I had the same problem. I was using a lite version of win iso. I think it resolves after cleaning the disk, and installing the clean official windows in the drive, exactly as it shown in the video.

[@leticiafernandes6859]

I need help please, when I start pendrive my windows freezen on blue screen and turn off, I can not find solution for this

[@riadamirbayov1812]

I restarted my MacBook through the key combination but it shows only Macintosh HD and Options, what to do

[@GavinSchumaker]

Good video - very helpful for re-purposing my old mid-2011 iMac

[@MARS-eb8pt]

Did it work?

[@TheRoadTaken]

This process was by far the easiest way I've been able to get Windows loaded. I only needed Windows to run an older version of Photoshop since various versions of photoshop do not work on Mac. This was a simple way to accomplish this. For whatever reason, I couldn't get Boot Camp Assistant to complete, it'd fail at various spots but your video resolved that. I wish I'd found it sooner rather than spending several hours. I've never had issues with BCA before today so I'm a little shocked but glad it was an easy resolution. I had installed VMWare Fusion to run windows as a VM but performance took a hit (of course). That said, sometimes I need windows just for a few minutes so rather than doing a full reboot into the Windows OS, I'll launch VMWare Fusion where I have VMWare setup to run Bootcamp partition as a VM. If I'm going to be working for a few hours in Photoshop, I'll do a full reboot to take advantage of all of the hardware. Best of both worlds!

[@SuperSigmaTJ]

Dude this is actually accurate with me. Bootcamp didnt allow me to partition the disk, so ima try, and i will let know if it works.

[@samuelribeiro7220]

@@SuperSigmaTJ It worked here, good luck my friend!

[@SuperSigmaTJ]

@@samuelribeiro7220 your luck paid off, i now own a 2013 imac that actually worked. tysm

[@myusrn]

I'm wanting to do this on an iMac 27" late 2012 that has opencore legacy patch applied to the efi partition to enable running monterey in the macOS partition. When i follow these instructions to put win11 in a new partition created on the macOS ssd will the win11 installer tromp that drive's EFI partition setup or leave it as is?

[@jensdbe]

It might be that you need to boot holding optuon and manually select opencore to boot. Once in OC, you can then boot Monterey and Windows

[@tarragon112]

btw you can achieve the same effect of brigadier if you go into bootcamp yourself and install the drivers by themselves (go on the top bar)

[@tarragon112]

nice video though

[@truesightgrabber]

iMac mid-2011 freeze on windows logo after first step and restart without continue windows installation.

[@falcovd2511]

Im stuck on the loading screen after the instal :(

[@tomek860]

A friend gave me his old late 2008 13'' macbook (pre unibody). I replaced HDD with SSD and it works just fine for web browsing. It is currently running Windows 7 via Bootcamp as I need it for my car diagnostics software. I was wodndering if it is possible to ditch Mac OS completetly and just Windows + Linux ?

[@jensdbe]

Sure, this is not a problem at all. I would first install Windows and get rid of all macOS-related partitions during the install, create a partition for Windows and another for Linux and swap. Then install Windows, followed by Linux. As the Windows boot manager can't boot Linux but GRUB(2), which will be installed by your Linux distro can boot Windows.

[@mohamedalaraby4259]

How to execute orders at brigadier?

[@capricornraheel]

actually my question also is this

[@neslihanaltin615]

i got an imac 11,2 and am still having difficulties. i used rufus because the windows media thingy wasnt working and rufus worked but now my screen is blank after installing the drivers

[@manishachauhan4718]

Thank u very much bro my I reseted my mac and can't reinstall os x so I try windows and your video help me a lot Life saver bro I was in frustration for the last few days❤❤❤

[@halaldunya918]

Works perfectly, could you make a video on how to put android on Iphone 😂😂😂 ???

[@AraceliLopez-om7zp]

😃 This guy really deserves a like,

[@natoornstra5475]

I have successfully added windows to my imac 21.5 mid-2011 12,1 but I receive an error message with i attempt to use the brigadier download for drivers "must use windows 7" please help! Everything seems to work except sound

[@jensdbe]

Any missing drivers, as longs as network connectivity works, are most likely offered by Windows Update. Just make sure you select all optional (driver) updates.

[@bwotech]

Everytime I insert a Windows-USB-Stick and choose "EFI USB" on the Boot-Menu my iMac 24" 2007 freeze. Does anyone has an idea why and what will help?

[@HennehAlfred]

Please sir after the installation of the windows my windows was diagnosed when I tried to restart it after that this pop up “”how to fix windows system32 logfiles srt srttrail.txt “” can you please help me please

[@respawnaddaudio767]

Is there any way to check the model identifier without macOS? As my iMac has a blank hard drive.

[@jensdbe]

You can use the serial number and do a search on everymac.com

[@justinheuser5676]

Mine reboots but stays on the black screen with windows logo and nothing else. I let it sit for 2 hours, and nothing😭

[@enhanceduk4642]

FREEZE FIX: If anyone is getting freezing during the first install boot, simply boot into OSX first plug your bootable Windows USB and run first aid. That should fix it.

[@Y.H.3.]

Hey since you just commented 1 day ago I figure you can help. When I try to run the command prompt it says there is a windows error and the system can’t find the file specified. It also talks ab installing 7-zip what does this mean

[@enhanceduk4642]

@@Y.H.3. You will need to download and install 7-zip then re do the commands

[@Y.H.3.]

@@enhanceduk4642 the problem is idk what a 7-zip is. I’m trying to get windows on a late 2013 iMac and I’m at the point of giving up because I can’t understand this type of stuff

[@enhanceduk4642]

@@Y.H.3. You can google the zip and download install it. I gave up Purley because this method didn't work for me in the end. The problem is windows 7 will only boot on a mbr partition. So I ended up getting rid of rubbish OSX I now only use Windows which works beautifully. Easiest way to do this is burn windows 7 onto a CD or USB then boot your MacBook into recovery and open disk utility and erase the HDD to master boot record (all data will be gone) then insert your usb or CD and restart the MacBook holding options then select windows and then install

[@trexcretaceous]

Thank you so much, it worked perfectly. I was struggling with Bootcamp, a lot of errors.

[@jonathanvelizv.2915]

Gracias, muy bien explicado, hace 3 meses que no podía instalar Windows, por un error con el chip M1 el MacBook estaba inservible

[@alinnegru3606]

Bro.... following your video I just finish to install Windows 11 Pro with no TPM and minimum RAM restriction on IMac 27" from 2011. I have a lot of experience with windows install but just a little bit with IOS. You are good. Cheers bro. Your video and you are the best. :)

[@eurowings900]

not working on iMac 15.1 ... installation error at 6min timline in this video (the same error like bootcamp)

[@samuelribeiro7220]

Thank you for sharing this process with us. It was really helpful! Just installed W11 on MacBook Pro 2013 :)

[@TurboAnime2012]

thx very much for you help

[@giftedmatiki]

i am having an error, after 100 percent full download, no file is found in the iMac folder.Suggestion? the last command info after the error says IOError: [Errno socket error] [Errno 1] _ssl.c:504: error:1407742E:SSL routines:SSL23_GET_SERVER_HELLO:tlsv1 alert protocol version

[@jensdbe]

Are you on an old version of macOS? Also could be related to having the wrong time set.

[@uroy8665]

brigadier downloads and create 0.Apple_ISO file, I had to unzip that file to get required files, so I was struggling, no mention of this step in your video for common man ! Anyway your explanation is good and I am able to install windows as dual boot in MacBookPro11,3 ! Thank you. I was unable to install using bootcamp, as I use nvme ssd with converter, when tried to install, I was not able to format or use the 3rd partition created by bootcamp, so failed several times. Using your video, I am able to install windows as dual boot. Thank you very much.

[@jensdbe]

Good to hear this helped. Normally that step is not needed. Brigadier should unpack the downloaded file automatically. Hence why I don't mention it :) Strange

[@thedrakekingyadig6250]

I am having the same problem with my MacBookAir7,2 But as a common man, I don't understand your above solution, how do you create and unzip an 0.Apple_ISO file? If you would be so kind.

[@Favoxhille]

@@thedrakekingyadig6250 hi, hope you resolved by checking the error message in console, anyway in my experience brigadier doesn't download anything into the new directory that creates 'C:\Users\username\Downloads\imac\BootCamp-061-62383' because it tries to call 7zip (and if it is not installed it will try to download but then it can stop the all process and interrupt the donwload). Solution just install 7zip in your main drive and brigadier will complete its script successfully

[@epv3670]

Executing brigadier ends with the errors ... ERROR: Data Error : Windows6.1-KB2685811-x64.cab ERROR: Data Error : Windows6.1-KB2685811-x64-pkgProperties.txt ERROR: Data Error : Windows6.1-KB2685811-x64.xml Sub items Errors: 3 Archives with Errors: 1 Warnings: 1 Sub items Errors: 3 Command failure: C:\Program Files\7-Zip\7z.exe e -oc:\users\erik\appdata\local\temp\bootcamp-unpack_daa_r4 -y c:\users\erik\appdata\local\temp\bootcamp-unpack_daa_r4\Payload~ exited 2. and the folder BootCamp-041-98143 is empty. Can someone help? Thanks.

[@jensdbe]

In case you're struggling with the command-line for Brigadier. Have a look at Bombardier, which comes with a GUI, same purpose: github.com/ninxsoft/Bombardier

[@ItsMeSFSPlayerAndRoblox]

You can directly boot to windows but windows will not recognize a lot of

[@henokhaile2054]

thnaks you saved my day

[@balazs_5310]

I get a blackscreen after i biot into the usb drive. Do you know the problem?

[@quanminh7097]

I have same issue, the screen only displays icon window with black theme, and nothing changes

[@ArtisticIntentionZ]

this doesnt work for latest ios Sequoia. no hard drives show up on install setup just shows empty list.

[@jensdbe]

I don't think that is related to Sonoma. Most likely the Windows setup does not have drivers for your storage controller or NVMe drive. If you have downloaded the bootcamp drivers, you should be able to browse for them in the $WinPEDriver$ folder. Check out the video I did earlier on a 2019/2020 MacBook Air with the same issue: kzbin.info/www/bejne/jqTOlIajl5uhiq8

[@abdiquduus]

How can i delete windows on my mac without boot camp

[@squatch545]

Could Windows be installed on an external SSD using this method?

[@jensdbe]

I haven't tried that but it should be possible. Depends a bit of Windows itself will allow it rather than being supported on the Mac.

[@sandeepbaliga5616]

Hi Jensd can i do this in my iMac (21.5-inch, Mid 2011) model ? will it support ?

[@jensdbe]

Should work fine, yes

[@TurboAnime2012]

this worked on my imac 27 inch mid 2010 i was shocked because i couldnt even install win 8 or 7 on bootcamp but i could install win 10

[@jensdbe]

Good to hear that this helped you :)

[@OffHost]

Hey man, I’m having a problem with the drivers it says windows can’t be installed and drivers. I can’t hit necks on it. It’s all greyed out

[@acravivisionproduction8477]

When i`m trying to boot ( min 5:50 ) i`m pressing usb icon and nothing. it s blockin` . why ?

[@SevenDeMagnus]

Hi, when I boot to the USB installer, it produces a BSOd. What's the difference of Brigagier and Apple own Window Support drivers? God bless.

[@jensdbe]

Brigadier is just a tool to easily download the driver package from Apple as this is not publicly available without going through the Bootcamp process.

[@skylarkiv]

I got to 6:56 without issue, but when the set up gets to ‘Getting Finished’ I get the error: ‘Windows could not prepare the computer to boot into the next phase’ Any ideas what might be causing this problem?

[@thekakashi100]

dude i unplugg ed the mouse and it worked

[@DJ_Raps_254]

Very helpful

[@imadsbaiidrissi6397]

Thank u so much, the easiest method ever to get both operating system running smoothly on MAC device, thanks again.

[@eugrus]

Just guessing that Macbook Air users will run into a problem being: Brigadier needs to download drivers on the machine it does detection on, but Wi-Fi won't work without drivers.

[@jensdbe]

That's the point of Brigadier, to download the drivers before installing Windows. This happens from macOS where wifi/networking works. Once Windows is installed, you can then use these pre-downloaded drivers to get connectivity back to a working state.

[@applsauce_spl]

I tried that but for some reason even after trying to install and reinstall the drivers it doesn't fix the wifi issue ;/@@jensdbe

[@raiyanhussain7916]

will it work on an iMac that doesn't officially support window 10 for example iMac (21.5-inch, Mid 2010)

[@jensdbe]

Should work, yes

[@OlubukolaOzone]

I did everything as you said, but my speakers are still not working. It works only when I'm using MacOS. I use iMac12,1. Is there any further assistance you can provide? Thank you.

[@Techverse..]

this video is brilliant and is. easy to follow thanks

[@adrissoncunha]

Didn't worked for me on the part that pressing ALT to open the screen to choose USB removable, it doesn't show in Macbook Pro (A1278) just shows the internet option and the system can't reinstall itself by this option.

[@jensdbe]

With some keyboard it goes difficult. Try with a non-wireless keyboard or alternatively set the drive to boot from using the Startup Utility from macOS.

[@alfaresalawal]

I installed a windows installer on my windows 10 like you did on a usb and then when I put it in my Mac and restart it with the option key I get presented with three disks. My Mac, My recovery and the windows installer usb. However when I want to boot into it the screen freezes and the only option I have is to restart my Mac. And I don’t know if it affects or anything but my Mac is patched with a high Sierra patcher. Please if anyone can just drop an answer below it would be a miracle. Thank you!

[@arcticfoxacosta]

i can boot into my windows 10 usb with mojave patcher on my macbook maybe you can try to create a new windows 10 usb

[@mememin100]

Bravo!

[@vkvermaofficial]

Mine is imac 14,2 and it stuck on windows logo during installation

[@husnainali1218]

Hello sir windows 10 no audio sound Please help me

[@jensdbe]

Try to install the optional driver updates in Windows Update. In most cases this fixes the problem.

[@husnainali1218]

@@jensdbeonly sound legecy mode

[@LukasRDW]

Great guide. Thanks for the help.

[@mikebrostlove13]

My Mac is 2019 it's no longer supported don't fall for omg windows running with out som sota vm wear Microsoft patch the iso don't waste your time get a regular pc

[@johnmichaelc216]

you should put also in the PIN COMMENT the COMMAND u put in command promt,,(time 3:30)

[@jensdbe]

The command depends on the download location etc. Its just launching the downloaded tool. But in case you're struggling with the command-line for Brigadier. Have a look at Bombardier, which comes with a GUI, same purpose: github.com/ninxsoft/Bombardier

[@bigbritx8824]

Most concise and simplest process I've found yet to install Windows on a Mac without the Mac OS. Worked the first time. Thank you!

[@jensdbe]

Great to hear!

[@fleurrr_dl]

I struggle with the command prompt: he says brigadier.exe : The term 'brigadier.exe' is not recognized as the name of a cmdlet, function, script file, or operable program. Check the spelling of the name, or if a path was included, verify that the path is correct and try again. At line:1 char:1 + brigadier.exe --model iMac11,3 + ~~~~~~~~~~~~~ + CategoryInfo : ObjectNotFound: (brigadier.exe:String) [], CommandNotFoundException + FullyQualifiedErrorId : CommandNotFoundException

[@digory4503]

Excellent tutorial! Many thanks!

[@josgrotepunt7256]

Thanks for your great video. I am using an iMac from mid-2015 with Big Sur. Everything goes well until the Windows Setup program wants to reboot. Then I get this error message. It's in Dutch but I guess you can read Dutch. De installatie is geannuleerd. Wijzigingen die op de computer zijn aangebracht worden niet opgeslagen. Kan de computer niet voorbereiden voor het opstarten in de volgende fase van de installatie. Start de installatie opnieuw als u Windows wilt installeren.

[@ritvikseditz]

Thank you, but i need help getting back to my Imac please help my dad is gonna kill me.

[@jensdbe]

It's explained in the video how to switxh between macOS and Windows. At the end.

[@ritvikseditz]

Thank you so much!

[@FaoAfterLumn]

ok i need some help here, i boot up my windows and the screen goes black after the windows logo shows up, any solutions?

[@Djs1256]

Yah same I’m on a MacBook 2017

[@Pymmusic]

Thank you very much! Fantastic Video, very usefull!

[@guidebot101]

I'm trying this on the same Imac as you, but when I select the usb drive to boot I get a black screen. There some errors when downloading with brigadier and it doesn't say "Everything is Ok". Any help would be greatly appreciated.

[@DoctorLoganPhD]

Thank you!

[@tomastor9305]

Thank you very much for this video! I want to do this on my Mac Pro 7,1. Is this possible to install Windows on a PCIe SSD to boot the Mac OS from original internal SSD and Windows from PCIe SSD?

[@nyarkosam]

Perfect

[@LeeDavies-vy9fd]

Brillant video except it fails everytime on the command. starts the download then fails after 100% download

[@ohcacestpastresgentil8462]

hello! i have a MBP mid 2013 with windows10 installed, is there any ways i can make the brightness buttons on the keyboard work again ?

[@jensdbe]

Installing the bootcamp software should fix that for you. Make sure the tool also starts with the system.

[@ohcacestpastresgentil8462]

@@jensdbe i didnt use the bootcam app, used a bootable USB, i found fixes on github!

[@neshomk]

You should have warned that the creation of the bootable USB would delete all files on the USB stick 😡

[@wubman535meme7]

😂😂😂😂

[@SaasBahuFoodnFashion]

This was an excellent tutorial

[@8-bitYT-02]

do it fully covers our system or but it still macbook

[@micdev42]

Hi. I've just tried this on my wife's newer MacBookAir A2179 from 2020. I fixed the issue with not being able to boot from an external drive (USB drive) but once the Win 10 installer starts, the Mac's keyboard and trackpad are inoperable. I therefore can't get past the first language selection screen. Any ideas how to proceed? Thanks. FYI I updated the Mac first, so it is running MacOS Sonoma 14.5. Mac system identifier: MacBookAir9,1

[@jensdbe]

Most likely the Windows setup does not have drivers for keyboard/trackpad. Check out the video I did earlier on a 2019/2020 MacBook Air with the same issue: kzbin.info/www/bejne/jqTOlIajl5uhiq8

[@micdev42]

@@jensdbe will do . Thanks

[@micdev42]

@@jensdbe thanks for the response. My MacBook Air has 2 USB C ports only so - as per your suggested video - I ended up connecting an old USB hub to one of them (using a USB C to USB A adapter) then plugging the mouse, keyboard and USB drive into ports on the hub. One little wrinkle: to boot into the Windows installer I had to have only the USB drive plugged into the hub. Once in the installer, plug in the mouse and keyboard to complete the installation. Another little tip: after I installed and ran Windows Updates I was still left with 4 devices flagged in Device Manager as missing drivers. I fixed 3 of them by installing the "Intel Chipset INF Utility". That left "Base System Device" as the only one missing. I haven't been able to fix that but Windows seems to be running OK ATM. HTH someone.

[@juskask]

thank you, I make it 😊😊😊

[@AhmedKhaTer_UwK]

at 6.30 , i cant find any partitions to select to install windows on it ! anyone knows how to fix it ?

[@jensdbe]

If you did not create/split your drive with a new partition, you can just create a new one. In case the installer does not show any storage devices, then most likely the Windows setup does not have drivers for your storage controller or NVMe drive. If you have downloaded the bootcamp drivers, you should be able to browse for them in the $WinPEDriver$ folder. Check out the video I did earlier on a 2019/2020 MacBook Air with the same issue: kzbin.info/www/bejne/jqTOlIajl5uhiq8

[@theadventurer7259]

I have tried many ways and I am gonna try this one. I don't know why but when I click on format it doesn't let me install. I'm in gonna try this one more time

[@jensdbe]

What exactly is the message you get when trying to install on that volume/partition?

[@RiteshMishra22]

Awesome