JET FIGHTER OR CORVETTE?? FILLING IN THE REAR - WIDEBODY C4

[@johnnywhite238]

C4 Vette badazz

[@troygaskins1301]

Glad to see the C4 getting renewed attention....I've seen plenty of 69 Camaro builds

[@RustedandBusted]

Absolutely! They all need a bit of love ❤️

[@GregoryThomas]

Awesome stuff 😎🤘

[@RustedandBusted]

Thanks buddy 🙏

[@FSHooligan]

Just here for the GTI cameos on the tv 🤣

[@RustedandBusted]

Hahahaha

[@ernest2641]

Off topic question, howd you get the c4 tail lights to hook up to your blueghozt? did you use a 2-3 wire splitter by chance? Im trying it with my 1990 corvette cuz its got those dual filament 1157 bulbs where the DRL/tail lights are on their own wire and the brake and turn share the second wire. I cant seem to get it to work, the module keeps getting confused. any thoughts or suggestions?

[@RustedandBusted]

Good question!! Oh it was not that easy my friend. I tried the splitter but it did not work as I needed it. As you may or may not know, the brake signal and the turn signal are on the same fixtures. If you have a third brake light you would think you would be able connect the ghozt to that but then then the turn signal would still activate when you press the brakes. What I had to do was cut the brake signal wire at the pedal and run a dedicated brake signal from the pedal to the controller. When you sever that connection the ECU of the car would only see turn signal to the rear lights. It's a bit hard to explain LOL Basically, the car ECU controls the lighting to switch between signal and brake. You'll need to bypass that signal and one filament signal will be your park light and the other a turn signal. You'll also need to switch your flash relay to an electronic one in order to use LEDS as well otherwise it won't have enough draw to pull that relay in and activate

[@RustedandBusted]

I may be able to do a "short" explaining this on a whiteboard.. may be a little easier to explain 😆

[@ernest2641]

@@RustedandBusted thatd be awesome, I think I get the jist but itd be helpful for anyone experiencing a similar issue. The biggest struggle when doing super specific unique jobs like this is when you look up solutions you never find someone in the same situation lol

[@ernest2641]

@@RustedandBusted If you did a short could you show where you located the wire you had to cut on the car? Im looking into it and It seems like most c4 corvettes have 2 plugs that go into the brake switch

[@jedbidia1988]

Where do you buy your abs sheets big dawg ! Love from not so far away !❤

[@jedbidia1988]

Also i really like your idea for moving the wing back and down

[@RustedandBusted]

Hey big dawg!! I picked the sheet up from Canus plastics right here in Ottawa. Ohhh thank you! It looks quite a bit better now with it lower for sure!

[@jedbidia1988]

@@RustedandBusted lovely thank you! Cant wait for the next vid i love watching peoples ideas come to life

[@RustedandBusted]

@@jedbidia1988 right on buddy! I always appreciate you watching and supporting 😍

[@RustedandBusted]

Awesome! It actually worked or really well. Much tighter look and helps fill in the rear quite well 😄👍