Jet Ski Trailer Bearing and Hubs: Install

[@garycrosby4973]

Little too quick for me

[@luckyeasyfree1]

My favorite part was when you explained how to do it instead of just showing a fast-forwarded version with music playing which made it really difficult to actually see and understand what you were doing.

[@oldfarth2016]

Fair enough. Thank you for your elaborate feedback :). I can do another video next time.... - Bearings can only go in one way. - Need to pack the bearings first. That is what you see me doing with the grease in my hand. Just scoop the lip of the bearings continuously until the grease comes out the other side. Here is a better video of packing the bearings if you still need help kzbin.info/www/bejne/i6ranX5ti7Z8iKc. - Seal goes on the back side of the hub. Install the bearing then seal (solid side out) with a hammer and equally sized socket or 2x4 to ensure even pressure. - Front side seal is installed same time as hub to the axle. It will be secured when axle nut is installed. Tighten axle nut evenly including rotating hub to ensure even seating. - When fully seated, rotate axle nut a 1/8 to 1/4 turn counterclockwise - Install axle axle/nut cotter pin - Install wheels. That's it!

[@janessaray5719]

*promo sm*