❤❤❤❤❤❤

You don't need to block it off. Just take the hose out and leave it like that

Do you know if you can install the handlebars and grips without getting the steering system?

Don't for get if it's supercharged make sure you don't forget to take the ribbon out to improve air flow

I wonder if you could just weld in the partitions to the original intake and save a boat load of money

Do ride plates magically install and uninstall or is there another video with the step by step install? Asking for a friend.

Does it get hot in that compartment area, from the machine?

My favorite part was when you explained how to do it instead of just showing a fast-forwarded version with music playing which made it really difficult to actually see and understand what you were doing.

What could be cheaper than just taking the tube loose at the top and route the hose downwards? Exactly what I did for my fishing rig.

Have you heard of PWC DOCTORS VERSIPLUGS OMG WE HAVE 2 SETS ON BOTH OUR 2023 EX SPORTS NEVER HAVE TO WORRY ABOUT PUTTING IN OR TAKING OUT THE PLUGS JUST PUT EM IN AND NEVER LOOK BACK

Sorry for the loss of gear; still a great video!

Yeah, the thing is pretty expensive even for an SVO for what you’re getting

Nice vid. Thanks for sharing.😎

*promo sm*

64 top?

Have you done the ribbon delete, if not curious on your thoughts to why or why not. Thanks

Stooopid !!

Riva after christmas was 40% off I spent a 1000 bucks on stuff.

Where did you get your seat from?

Have you looked into any of the new JetBlaster (22, 23, etc) parts to see they are interchangeable to you EX?

Does the optional Bluetooth volume button work with any brand speaker?

I enjoy your videos on your EX’s. I have 2021 EXR and the glove box door barely stays on. The hinge side is the issue. I have been trying to come up with solution to retain the door if it pops off. It’s a really strange arrangement.

I needed a couple pointers on reinstalling my wife's EX intake grate and found this video helpful. What lake were you riding on at the end? We ride the Colorado just north of Yuma. Also just subbed ✌️

I did mine for free, take a 1/2 bolt, cut about 1 '' of hose , shove the bolt in the hose and clamp it all down.

I just put the JetTrim on my 2018 FX SVHO Cruiser. Was surprised at how easy it was. Took about 3 weeks to get the seat covers in which was super fast. It took about 30 min per seat and that was taking the staples out. I bought a staple remover that it’s like the back of a claw hammer but on a screw driver. So I can pry and it will pull the staples without having to use anything else. According to their instructions, If your original seats didn’t have the hold down tab straps, like yours since it doesn’t have raised areas, you keep the original cover on to waterproof the foam. If it has the straps, like mine since it is raised in areas, you have to use a bag to cover the foam. I ended up getting a roll of the slick film they used originally and put it over my seat. Stapling everything back on only took about 5 minutes. And I got the same stapler as you. Worked awesome. I got the marine staples, but they wouldn’t sit flush and just ended up using the stainless ones. I can’t wait to get mine out on the water. Due to your grip video, I order the grips and the extender from Worx and they should be here today. ODI is close to me, about 20 minutes away. But when I went to get the grip extender, it also had the grips on their site too. I also ordered their trim extender for my ski.

Thank you for all this important information

Did you sell the jetskiis?

I haha racing is addictive and fun.

Did they make you disable the visibility spout?

Great presentation, Enjoy the Ride and be Safe.

Slamming your balls or a softer seat pin the throttle the wave runner will chop those waves straight pin your a good driver and spank that green machine 1499cc with mods

52 mph the wave runner chops/hops those tiny waves

The stock EXR / Jetblaster intake grate is the best you can get. I bought a Riva intake grate for my '23 Jetblaster, and it does not hook up as well the stock intake grate. Cavitates way more than the stock grate. Kinda disappointed. However, fhe Riva ride plate was a massive inprovement.

The impeller is more for a full throttle acceleration, stunting and choppy water, it's design helps prevent cavitation and maintaina hook up instead of just spinning and bouncing off the rev limiter. The ride plate is more for handling. Pwrosnally on my brand new 2023 Jetblaster, the ride playe eliminated my skis porpoising. It really liked to porpoise at medium speeds on light chop, now ot doesn't. It also liked to slide out in hard turns, and the ride plate eliminated some lf that tendency as well.

I tried my friends svho with riva sponsons and i loved it!! Thanks for sharing! Def getting those!

One of the most convenient locks you can get for the trailer hitch lock is the Bolt brand lock. You get ones that are keyed to your vehicle key. I only have one tow vehicle, so I have a few of their locks, a pad lock, cable lock, hitch pin lock, and the trailer hitch lock and then they have a tongue lock. All keyed to my truck. So it’s one key for all and I don’t have to have a lot of different keys that always get lost. As long as you have your vehicle key you have the key to your hitch and trailer and all that. For the spare tire, you can buy a lock for it that screws onto the lugs and actually acts as the lug nuts for it, you can undo it by hand, no tool needed. The two halves connect to allow a padlock to lock them so they can not be unscrewed, and your tire stolen. I use the Bolt padlock there. I use the Bolt cable lock to attach to the rear tie down to the trailer. Since it is a vehicle key, and they make them for all types makes and models. You need to make sure you get one for your brand vehicle and type of key, standard cut or side cute. Since it is a vehicle key, they are harder to just rake pick like generic trailer and hitch locks are. Can still be done, but takes more of their time. For license plates, use nuts and use the security head bolts or screws. They need more than just a screwdriver or pliers. I am also surprised when you got stopped in the past they didn’t mention the reg numbers. I can see if your video the required spacing is not there lol. But really check out the Bolt locks. They are awesome and don’t have to worry about extra keys or misplacing one.

what is the diameter of the handle bar with out the grip?

You should never have to pay to launch a boat

yamaha really screwed up the storage capacity on these skis.

My issue is my 21 EX Delux wobbles when riding my 6 year old on it. Will changing the sponsons stop the wobble?

Are the ODI "watercraft" grips different than their ATV grips? I had put odi rogue grips on one of my older waverunners and they were slippery when wet. maybe I got the wrong version? Surely there are not two versions of ODI rogue out there with different compounds?

munchos thank you

Best vid of this job on an EX. Thanks

Good video, do you have a link for the knee pads?

Much better solution than to just leave it open, for many reasons. I've sprayed enough people riding and sitting on docks. Time to give them a break. Before the sneak attack...

Thanks for all the detail! This was super easy especially since you provided the cap assortment kit item#. I'm much happier without my Visibility Spout!

1..i hope u all suck in rocks while put on/off trailer...2...dont put the speaker ties around the actual speaker cones....use at the end of the speaker....if that makes any since

Yep, like Phil said... roll it over a few times and buckle it up to seal it properly. It works well. I've got the front hatch storage, bow storage and rear storage on my EXR and it transforms the ski. There's so much more storage now and it makes very little difference to the ergonomics of the craft. The rear storage is great - enough room to hold a proper anchor setup. I usually use it to store a Sandshark sand screw-in anchor and a Coopers (proper) anchor with 2m (7ft) chain and 6m (20ft) rope. For the front hatch storage (ie. the pod on top) I store a tow rope, about 7M (22ft roughly) with snap hooks. In the bow storage goes items that can't get wet like cameras and so on. Just got to make sure you pad them a bit when going in the surf/wave jumping. Those 3 storage options totally transform the ski.

Link psra comprsr los bracket kit

nice vid!