How to get the BEST results when laser cutting leather - Glowforge

[@dave5176]

Thank you for sharing the speed and power settings!

[@JHLeather]

Any time 👍

[@scottkonop9331]

Thank you for another intelligent instructional video.

[@yunuskadiralakus]

Watched it! Saved for later as well

[@sus8e462]

Great info! But a note on masking: Sometimes the masking adhesive can adversely impact the finish--low tack tape or film minimizes this. Best to always test any new tape of leather!

[@paulj3653]

What an excellent video. well done and thankyou for sharing it with us.

[@JHLeather]

Glad you like it 🙂

[@khelves3077]

Thanks for the practical tips.

[@TammyHulbert-s2u]

Helpful video! Have you ever tried wetting the leather instead of masking? I do that regularly when I use a trotec laser, but I'm wondering the result with a glowforge. My experience is that wetting reduces char, and I truly believe it helps get a more consistent cut.

[@JHLeather]

No I haven't tried that, mostly because I don't want to wait for it to dry 😂

[@tammyhulbert]

@@JHLeather I’d rather wait for it to dry than pick the masking tape off. 😂

[@marshalltjones]

If you can take it all off at once, Gorilla tape works great!

[@JoeyMassie]

Do you have any suggestions on how to get rid of the burnt smell with cut/engraved leather? Thank you

[@marshalltjones]

Can you list out the recommended products that you mentioned?

[@mikes0on0the0loose]

Hi Jo, hope you are well! would love to see you make a video making a knife sheath. all the best!

[@JHLeather]

I have an axe one but will add that to my list 👍

[@mikes0on0the0loose]

@@JHLeather that's awesome! I've recently gotten into knife making. Maybe I can make one for you and send it to you so you can make a sheath for it.

[@johnchristopherrobert1839]

Thank you

[@marshalltjones]

I want to make keychains somewhat similar to what you are doing, but I don't want to do stitching. What kind of glue would I use to make a permanent durable edge that won't separate? I've heard contact cement? If that is the case, what brands do you recommend?

[@rrr40]

fantastic video very great informative :)

[@JHLeather]

Thank you 🙂

[@Tammy-un3ql]

Great video, thanks👌👌

[@JHLeather]

Thank you 🙂

[@James-ej8xg]

I have 3-3.5mm leather, what wattage cutter would I need?

[@JHLeather]

I have used the Glowforge pro on 3.5-4 mm bridle butt and it worked fine 👍

[@timproskine486]

@@JHLeatherwhat laser settings for the glow forge did you use for this thickness? Thanks, great video!

[@justinzak5025]

Could you [or better yet] would you recommend a laser cutter for fabric samples swatches for a small business?

[@michaelnavarrette1380]

Am I able to laser a already make purse using a machine ?

[@gaiustacitus4242]

You certainly could if using the xTool P2 with a riser base. You would also need a fixture to hold the surface to be engraved very flat. Otherwise, the variation in surface height would ruin the purse.

[@شوفيمافي-ض3ث]

أنا متابع لقناتك شكرالكي على ماتقديمينه ممكن وضع ترجمةبلغةالعربيةبشريط أسفل القناة

[@Beorn2010]

Hi Jo, from what I managed to hear, some good advice and tips unfortunately the “please hold the line/ lift muzak”, drowned out your dulcet voice. Sorry for being a moaning old sod.🤗