【加工動画21】旋盤で六角ナット（大）/ How to make big hex nut on a lathe

旋盤で大きな六角ナット(M45)を作りました。
快段目盛15cmスケール(定規):amzn.to/3EoY8L0
チップソー: amzn.to/3vkKl1n
段取り用手袋: amzn.to/3tDBYwV
使用した旋盤: ワシノ/Wasino LR-55A
※動画の一部、段取り中（機械の電源offまたはニュートラル状態）に手袋をしていますが機械の駆動中は巻き込まれ防止の為に外していますのでご安心下さい。
正式な加工方法ではありませんがアイデアの種にしていただけたら幸いです。
It's not a formal processing method, but I hope that you will be careful about safety and use it as a seed for your ideas.
I am wearing gloves during setup, but I remove them to prevent being caught while the machine is operating.
背景音楽/BGM: New Land - ALBIS

[@SoFlaGuy612]

Your workmanship is a pleasure to watch. As others have said you keep your tooling in excellent condition. I would really like to see a video of your shop and learn more about what you make commercially.

[@stanb5685]

Watching you work is a pleasure and the idea is that you were showing people is second to none. Excellent work.

[@Spurioushamster]

That is the cleanest lathe I've ever seen. I love how you clean the machine between shots, it makes it a real pleasure to watch.

[@要津兵衛]

何気なく使っている治具がよく考えられていて、無駄がなく、汎用性が高いことが素晴らしい！ 作業手順を細かく撮影してくれていることも、とても勉強になるし、どういう点に注意を払えばいいのかがよくわかる。 いつもいい動画をありがとう！

[@normcameron2316]

Beautiful workmanship. Has to be the worlds most expensive nut.

[@KARFAGEN7275F]

Качество Инструмента вызывает восхищение и гордость за Токаря ! Практически , везде отсутствует биение и в патроне и во вспомогательных приспособах !! Приёмы работы - чёткие и взвешенные . Просто загляденье в производимых движениях ! Эх , КАРАМБА ...!!! Моя молодость , моя профессия и моя Жизнь ! Обожаю токарное ДЕЛО !! БРАВО , токарь !!!

[@seed13ro]

Пожалуй, поддерживаю =)

[@HarjinderSingh-qh3sy]

Î

[@Zevs585]

а вот прикинь,пластинки не перетачиваемые,не ну разок может и переточишь а дальше державка не даст ну то что ты её три пять раз повернул до лампочки вот те и фунт соли...

[@valshu7644]

А руки какие! Прямо девичьи....

[@mousesons]

Никакого восхищения, все именно так, ровно потому что ни этот инструмент, ни этот станок не видят работы. Это как музейный экспонат в музее, не более.

[@gedounumber3]

まさか治具づくりから始まってるとは思いもしなかった… しかしまぁ、やっぱり金属が加工されて行くのは美しいね。 特に旋盤の加工が美しいと感じる。

[@no-rq4ck]

工業高校出身です。 実習で、ボルトとナットを旋盤で造りました。 懐かしいです。

[@rexaitken]

Your work is truly amazing and on its own level. For the lenght of every video I am entirely captivated

[@yaseino_bane]

一番最初の六角材で作るのかと思ったら違った 動画のたびに道具が増えていく

[@Mikey__Mike]

This is Brilliant. I love how much detail you put in every video. Wow again just wow

[@mayom277]

No sé ustedes pero. Cuando estudie máquinas y herramientas hace muchos años, el profesor hacia mucha referencia a la limpieza, personal y en el torno y la fresadora. Ahora que veo estos vídeos lo recuerdo y se ve muy bien el trabajo, manos limpias, herramienta limpia, muy bien sr. Muy buen trabajo donde quiera que este. felicidades !!!

[@robertburns2415]

Skill transcends language, race, religion, nationality, creed or any of the other barriers that have been put in place to keep man from appreciating man. My congratulations to you sir.

[@alphonsefenol2876]

Always good wishes

[@robertburns2415]

@@alphonsefenol2876 thank you

[@zbigniew5757]

Widać doskonałe opanowanie rzemiosła przez wykonawce tych elementów. Piekna zadbana tokarka . Gratulacje z Polski.

[@FredericoPawlowski]

Jakość najwyższa.

[@JakeElston]

Love the videos. Very precise and soothing to watch. Watched all your videos and I rewatch them every night before bed.

[@prodigy750]

I absolutely love how immaculate you keep everything, it gives a different feeling to the video, and your machines and workmanship are on a whole other level, looking forward to many more....

[@Metaldetectiontubeworldwide]

Rebirthing the horizontal millingmachine ...on a lathe ☆☆☆☆☆GENIEUS !

[@acemasterke]

Out of all the outside-the-box things I have seen on this channel, THE DRINK CAN SHIM was the most galaxy brained idea.

[@blackknights933]

Все Ваши видео смотрю с нескрываемым восторгом - очень красиво

[@kennel1952]

太いドリルが微動だにしない。全体的にも優れた加工だと思いました😃

[@boma6336]

刃物台に咥えるVブロックバイス作ってから大活躍ですね 汎用性がすごい

[@scottchappell3193]

It doesn't matter what language we speak engineering is a universal language all of its own,very nice job,I set cncs so I am used to seeing quality like this.very nice indeed

[@うださん-f4b]

旋盤加工の勉強になります。ありがとうございます！！

[@robsonvidal8005]

Congratulations. Once again, another nice old schooll machining video. No matter how technological a CNC lathe is, it's not comparable to mankind capability. To challenge the possibility of making a mistake and not make it is what proves the human talent. Machines will never match it.

[@endrizzi1000]

Mas allá del trabajo en si (que es absolutamente fantástico), me llama la atención la limpieza del torno durante todo el proceso, es como si lo limpiara a cada rato jeje. Excelente video, me suscribo.

[@danielribera2484]

Es la cultura oriental. Saborean cada minuto de su vida de forma sublime, hagan lo que hagan, como si ya no fuera a volver nunca mas; como los animales, viven intensamente cada dia como si fuera el ultimo. Curioso, verdad ? Los occidentales lo hacemos todo con prisas y solo pensamos en el dinero para la jubilacion y nos perdemos la vida por el camino. Tomar el te, por ejemplo; es todo un ritual para ellos. Nosotros no tomamos el cafe en un par de sorbos discutiendo con el que tienes delante. ........ es otra cultura en la cual no podemos competir. En fin, opino igual que tu. Y tambien me suscribo.

[@Marcelo-56]

Coincido con tu observación sobre la limpieza, pero, además, en el minuto 14:00 hasta se puede observar que el piso donde está el torno está pintado con epoxi industrial☝️ Es un lujo pocas veces visto en otros videos‼

[@IL_GUERRIERO_TRUCKDRIVER]

Grazie mille dall' Italia!!! - イタリアから本当にありがとう!!!

[@Blender_MMJ]

What a sharp knife, that cuting is so beautifully!

[@sanjaysami4315]

I have never seen the kind of surface finish that you achieve. Fantastic.

[@johnjones1586]

0⁰0 and get 0

[@asharahmadarrauf]

Absolutely fantastic work. Would be glad to see your machine and you as well.

[@guzmansantosaronibarrrios7159]

K maravilla , gracias a la ciencia , k nos dotó estás hermosas máquinas , mis respetos al técnico k opera a ese hermoso juguete saludos desde SICUANI Perú 🇵🇪✋

[@mouseminer2978]

Made in Japan, Made my Day

[@davidrussell8689]

Quality = care = pride .

[@ernestoo9175]

La verdad me encanta el torneado, ver a esta persona hacerloe conforta y me hace aprender algunas cosas como la limpieza de las máquinas resalta el trabajo

[@surinderdhiman]

Amazing! What a super finish work

[@abadansanat9691]

Very nice n clean on my taste All Your works put me in good mood n relax be blessed

[@АндрейАндрей-х1ф5ы]

Просматривая ваши ролики, получаешь удовольствие. Благодарю за роботу!

[@WRFUSINAGENS]

Trabalho lindo, parabéns, ficou muito bom.

[@KARFAGEN7275F]

Обожаю ваш КАНАЛ !! Будто вновь на заводе и точу для танков , на лучшем оборудовании и с лучшим инструментом . Всё родное , близкое и понятное ! Огромное МЕРСИ , Мистер !!!

[@quoctu1701]

This operator is very clean person as his hands always clean like doctors in surgeon theater .

[@aag198]

What is the brand of the finishing insert you are using ? It leaves a great finish

[@SwaplampJapan]

Thank you for watching. The tip is Sumitomo Electric's T1500 cermet.

[@francoisjeanvoine5934]

@@aag198 ⁰

[@chazevans1044]

I've always wanted to use the main spindle as a milling feature, never got around to it, mainly CNC, but absolutely adore your one offs. Great skill. Love the oil stick too. 😉

[@СергійГрицюк-в1о]

за чистоту, аккуратність і порядок лайк однозначний. Робота дуже гарна.

[@subalmitra1222]

Excellent operations.

[@Darkrif1957]

Beautiful as always ,i have watched all your videos many times over and i am learning ,thank you sir :)

[@joshwhite6947]

This dude keeps the cleanest tools on KZbin. I love watching your videos and I want that lathe, it’s definitely a Japanese made machine. What brand and model is it

[@SwaplampJapan]

Thank you for watching. This lathe is made in Japan and the model is Wasino's LR-55A. Currently, it is manufactured and sold by Mori Seiki.

[@joshwhite6947]

I appreciate the reply. Thank you for that and the great content.

[@alshoemaker9385]

Fine craftsmanship.

[@hieronymuslarsson1388]

Nice, creative use of the lathe and a well put together video. A comment on the steel ruler seen at 21:12 - those mm-markings are brilliant! Makes reading fool-proof and no need to strain one's eyes. Why aren't all rulers like that?

[@rfeaoaaoa5850]

I don't think the tour is Chinese there is no noise but you do a great job worthy of thanks

[@野菜之星]

お疲れ様です。旋盤技能１～２級ですね。

[@robertburns2415]

Watching for the second time. Still poetry in motion.

[@Pan__koubou]

所々怖い所はありますが、道具や専用の機械が無くても工夫さえすれば何でも出来る！勉強になりました

[@dbolorkhuu]

well done sir! i wish i had this kind of tools and skill

[@vh9936]

super lathe work

[@98_av_ingram]

どうやってナットになるかと思ったら最初作っていたのが治具だったとは！ 素晴らしいですね。

[@ianjeffrey3637]

beautiful work

[@Rizaagusania]

Manteb lur! Salam seger waras, Aku teko jowo. Delok alat bubutmu wapik, garapanmu wapik alus. Seneng aku delok kontenmu!.

[@반달레이실바-g9c]

한국에서 선반공으로 은퇴한사람입니다 7..80년도 조선소에 입사하여 일본식 치수 발음등을 많이배웠죠.....그립네요 지난일들이 영상 잘보았습니다~~~

[@andresoviedo5509]

Beautiful beautiful beautiful

[@297259]

Очень красиво! Hello from Russia 👋👍

[@tokar035.70rus]

Отлично 👏👏👍👍🇰🇬🇰🇬

[@ypaulbrown]

WONDERFULL AND MARVELOUS....CHEERS FROM USA

[@matoind]

Nice skill and excellent Tools.

[@KARFAGEN7275F]

Super Kavamacen !!! Bravissimo ...!!

[@marekciszewski2094]

Interesuje mnie technika i maszyny które pomagają ludziom w pracy

[@euripedespires6767]

Parabéns pelo trabalho, ótimo profissional 👏👏👏👏🇧🇷

[@TrPrecisionMachining]

very good job..thanks for your time

[@zainularifin4700]

Tool maker good good very good👍

[@nardaoeletronica]

Excellent job🇵🇹

[@ИГР-е1р]

Истинная услада для глаз перфекциониста! Благодарю.

[@nerokuwa4607]

Thank You for next great video.

[@guanghui9437]

Unbelievable, astonishing, this is the charm of technology, billions of times more than the beauty of Mona Lisa.

[@СергейБулатов-р6п]

Круто! Всегда смотрю ваши ролики и музыка всё классно! Успехов!

[@5phutsangtao-iQ]

lathe mechanic👍

[@DolezalPetr]

Hello Master, amazing job!

[@robertooliveira9316]

Trampo perfeito parabéns 👏👏👏👏

[@АнтонВишняков-с5х]

Как же чисто и аккуратно. Приятно смотреть. Палец вверх!

[@ОксанаГулый]

Турбины хорошие делайте особенно митсубиси фирма не давно инспекцию проводили одной в Краснодаре каждый болт произведение искусств красиво работаете приятно смотреть спасибо за видео

[@Solomon_73]

Мне приятно смотреть твою работу!!!

[@jamespark_85machiningtv]

Wow Amazing video, i Subscribed your channel, Thanks for Sharing!

[@wolfgangramackers3593]

du machst verdammt gute Sachen!! Ich wünschte ich wäre auch soweit!

[@OrnellaMartinez]

Sigo sus trabajos de ramos Mejía argentina muchas gracias

[@stels7776]

私は日本製のものがすべて好きです

[@backwardsmachining7526]

My luck I would make the wrong thread at the end and have to scrap the part lol

[@tarehjernetarehjerne4082]

I absolutely love your lathe, which model is it? I have a range of japanese machines myself. We run mainly Mori Seiki, and we use only Kitagawa chucks for them. I see you also use kitagawa, they are amazing.

[@SwaplampJapan]

Thank you for watching. Thank you again for your kind words. The model of this lathe is Washino LR-55A. It was designed and manufactured by a company called Washino, but since Washino sold its lathe manufacturing business, Mori Seiki has now taken over the manufacturing and sales. As you say, Kitagawa chucks are very good.

[@bazkf9979]

丸鋸用の鉄切断用超硬チップソーは 旋盤やフライス盤で使っても良い感じで切れるので私も使っています。 ステンレス相手に丸棒縦割りに使ってもへっちゃらですし 刃厚が薄いのでむだになる材料が減ります 。

[@zakariazaki7513]

I like this video keep going 🤠 greeting from Morocco* excellent good job 👍

[@zakariazaki7513]

Thanks your welcome from Morocco

[@YooProjects]

Thank you for interesting video 👍🤗🌶️

[@sanjaysami4315]

Just beautiful !

[@kamalkhadra8838]

Well Don. . Ultimate accuracy, exactly like CNC 💪👌👍👋

[@RAkhtyamov]

Good job!

[@eddierodriguez419]

Wow AMAZING SIMPLY 😍😍 RELAXING

[@cesarantoniomorenosanchez3533]

Tornos de exactitud y precision fantastica

[@СергейК-д1х7ш]

Данную процедуру можно назвать просто: Операция на глаза через анальное отверстие. Но вот пытливый мозг изготовителя, оборудование и инструмент достоен восхищения. Молодец.

[@mr.ranyhomemade2466]

You are so amazing and really professional

[@atmosphericpressure3560]

Very nice.

[@TheDieselmb]

Beutiful job

[@josesalanis4448]

Very nice job 💪

[@ZahidKhan-tj8ty]

Nice job

[@boujemaaaitabdelkrim6106]

Bonne finition continuez bravo by

[@РИФМОПЛЕТЫ]

Perffect job, but this can do it so eazy way and more quickly.

[@nkelly.9]

That's great stuff. What is the cutting tip you use to get such a terrific surface finish?

[@SwaplampJapan]

Thank you for watching. The chip is Sumitomo Electric's T1500A cermet.