@jkarmament form 1 solvent trap and now even more!

@jkarmament has some new accessories out on the market. They killed it with the form 1 solvent trap and they are still killing it. @qtrc10 @aimpointusa @holosunoptics @savior_gst @smithelite @tripleaughtdesign @steel_ops @fowlerindustries @vortexoptics @bobroengineering @surefire_llc

[@rockydubois2418]

I’m blown away on every video at how beautiful his piece of land is. Unbelievable

[@justinkase1360]

You can see it all because it has almost no trees, lol.

[@frankcastle7777]

LOL I was thinking the same thing. GOD BLESS

[@---yx7ti]

all he had to do was be born into a family of slave owners and imperialists, must be nice

[@rockydubois2418]

@@---yx7ti 😂 go apologize for your mumbling master or get your 4th booster. Whatever you 🤡s do nowadays.

[@newerest1]

@@---yx7ti statistically he's far more likely to have been descendants of europeans who immigrated here in the 1900s as super poor people

[@palerider1959]

A John Deer, a barn, a mountain backdrop and "whisper cans." Couldn't be better. You got a new sub.

[@ReticentIndignation]

This video is the most informative video I've seen on this sort of equipment, I'm now considering purchasing one and finally getting a suppressor. Thank you for this video!

[@JimmyMeatwhistle]

what a backyard!! 🍻👌

[@RottiDog100]

Woo hoo, no vertical video and comments enabled. Cool upload.

[@01AceAlpha]

I haven’t been following any gun channels for a while now because I was feeling tactical fatigue LOL. Now coming back, Costa has turned into tactical Santa, or Gandalf the white. 🤔

[@greywood84]

I was thinking that too. He's gotten old since his days with magpul.

[@erniemartinez1537]

You should also check out Paul Harrell

[@mikecloveridge8176]

You should check up on Travis Haley. He apparently has a son now. Spitting image of his old man, and apparently the apple doesnt fall far from the tree. His son is a gun you tuber as well. Go figure.

[@manatarms79]

You were gone a long time.

[@ryanburbridge]

I literally was going to comment on the grey beard and how it rocked. But then you dropped the old line. Ouch

[@blcouch]

Excellent presentation sir!

[@TheofficialCostaludus]

Appreciate that

[@l337l0gan]

I really wanna try this titanium kit on my 10.3" with adjustable gas! Finally something that can stand up to a short barrel 5.56 and some real training abuse!

[@tyclark8162]

One of the best videos I've seen, so thanks for your time n knowledge. I'd love to have a can, but I unfortunately have noone to leave it to when I die n I am a ole paradog.

[@Litty4Really]

Hope you’re doing good man! Just store it somewhere, hopefully a lucky individual comes across it and knows what he’s looking at!

[@christineharris9183]

Mr bad azz they are coming for your solvent trap suppressor

[@superboy305]

Look at that background scenery

[@ezdaar5435]

Use aluminum AN hose fitting automotive wrench’s designed for tight spaces, they are super skinny and don’t damage finishes.

[@thesilentone7582]

your land is so beautiful. Greetings from Swizerland !!

[@jobama3588]

$870 for a chunk of aluminum!? Holy shit! Might as well get a surefire and a form4 There's literally companies making it for $700 cheaper!

[@jrbcfd]

Great video and cleanest tractor I have ever seen!

[@TheofficialCostaludus]

I away spray it down before winter and grease it lol

[@Kentucky.Tactical]

I recently bought the jk 155p. I just got my Form 1 back and drilled for 9mm. I like how I can use different mounts as I also intend to use it for 300 blackout by way of the Griffin plan A mount. I would love to see a decibel test of the jk can with 8/6/and 5 baffles on both 9mm and 300 blackout. Love your gear reviews and wish you would show off and go over your AR15's with us. They would get tons of views.

[@The-Tactical-Plumber]

Does the griffin plan a have a hole for a pin weld

[@Kentucky.Tactical]

No it does not

[@The-Tactical-Plumber]

@@Kentucky.Tactical dang it I got a geissele super duty in 14.5 with a surefire flash hider I would like to find a quick detach mount that I can run a jk armament can on and still be legal 16” with pin and weld

[@joshuazachmann6644]

What do you think of the quality compared to other products on the market? I’m really intrigued but this design but my gun snob friends are trying to talk me out of it saying it’s a “cheap knock off of silencers”.

[@battletank21]

@@joshuazachmann6644 I know it's an old question, but he does have more than one. I'd assume for you to buy multiple they have to at least be decent.

[@Extreme_1776]

Great video and info.

[@bozobuckets785]

great land!

[@RIPPER334]

Only thing I've ever really had the itch to muffle was 22... And the JK prices are cost prohibited considering Ive bought several decent 22 cans for 100 bucks less than this "kit"... And they are ready to run, have a warranty, and liability. JK has a great idea... But for what they want for their kits, I don't see the value of DIY.

[@jeffjohnson7017]

I agree completely I can buy a surefire tried and true can for the price of some of these but I love the versatility ideas of these for sure

[@mholub85]

Just buy a real one...

[@georgerenner2513]

Thank you! I've been looking into these and I appreciate your taking the time to explain all the parts!

[@SamSam-ih6nt]

If you could bring a factory to Texas for Christmas that would be awesome. Made in Texas is going to take on a whole new meaning

[@cz-bundy6896]

I love my sugar weasel. It's my everything gun. Next to my bed. Then when I leave it's my truck gun. I love it so much if I ever get a chance I'll by another one. As far as the can goes the thunder chicken lives on it

[@FirearmEnthusiast]

Holy fuck every silencer company should adapt that quick detach system for handguns. Is there any POI shift when compared to direct thread? Is the QD system attached to existing barrel threads or is it completely proprietary to a dedicated barrel system? Man the future really is now LOL.

[@areaj8006]

Sounds like some quality stuff right there

[@jermbarnett1]

I wish I could say that it's faster to file a form1, but due to current times it has now extended the wait times for solvent suppressors. I filed my E-form1 for my JK back in December and I haven't even received my contract number to submit my finger prints to start the process which usually take about 7 day's after you file. I've called the atf several times with the same explanation to just wait and don't expect anything.

[@Austinofourtime]

I just got mine approved in 22 days.

[@Joemama1q]

Did you make your own model number or choose one from the list they have of already used model numbers?

[@thastinger345]

29 days for me, but not via JK, I filed it myself

[@jermbarnett1]

@@Austinofourtime Nice

[@jermbarnett1]

@@Joemama1q Yes I did Create my own model..listed 45HYBRID. Good news it's saved now for anyone to use..lol...but that could've been the reason along with the Gun scare and Covid. Although it only took roughly 140 days still not that bad compared to my 1year wait when I purchased YHM Tutbo k

[@The_John_Galt]

Small correction. Form 4 is pre-made not form 2. Just so people don't get confused. Also, just so someone can't claim intent, some people like to do the Form 1 online first and get stamp back (28ish days) before purchasing.

[@thebadseal4895]

I mailed my Form 1 in October 3, 2020 including the credit card info sheet so they could charge my card. They just returned my Form 1 and C.C. sheet with a letter saying I didn't include my payment... Total clusterfuk idiots!!

[@jeremyrode6581]

Excellent!!

[@jamesluke5910]

Talk about a homestead 🤩

[@danielsullivan7740]

Great info! I wonder if JK is going to come out with a surefire attachment? That would make my life easier considering all my carbines have surefire breaks and flash hiders on them.

[@sajidakh]

Youre right daniel theyll make sure just to retool and sell surefire attachments JUST FOR YOU

[@grinchyface]

Q Plan B and a Cherry Bomb.

[@danielsullivan7740]

@@sajidakh You think they will? Wow thank you. Do you work for JK? You must since you know so much. Thank you for the information.

[@danielsullivan7740]

@@sajidakh I hope you pick up on the sarcasm. However if you didn’t since you seem a little slow. I’ll try a different and more direct approach. Now you say JK won’t make an attachment to accommodate one of the most popular muzzle brakes and flash hiders on the market. But if they do it will be just for me? Wow you are a special kind of stupid. Why would a business try and make something that would attach to something that a lot of people have? Hmmmm but then as long as they do it just for me. You’re a fucking idiot

[@EnPeeSee]

@@sajidakh just him and the tens of thousands of other Surefire muzzle device owners out there. Are you stupid or something? With how popular Surefire muzzles are, accommodating them should be a major priority for this company.

[@thunderkat5282]

Sounds like the AFT isn’t accepting firm 1’s for solvent traps anymore. :(

[@yellowmanusa]

I believe T-Rex Arms makes a holster that can accommodate a suppressor on your G19.

[@7gerez]

They do. And it is awesome

[@TheofficialCostaludus]

Yes and so does Surefire but I don’t want so overt

[@sheepdog916]

Costa Ludus Did you Drill and Pin your Criterion Core or just Set Screw the Dimple? Criterion Recommends not Drilling as it affects Harmonics, but many MFGs swear by Cross pinning. Thanks

[@TheofficialCostaludus]

@@sheepdog916 they did it, I don’t think it has a pin just the two set screws

[@sheepdog916]

Costa Ludus they only come with 1 dimple, because not every customer uses the same Gas Block and every gas Block spaces Set screws differently, but the gas Block they use and recommend (the Badger TDX) comes with 2 set screws. Do you think they dimpled a second time for you?(since they knew what Gas Block they’d use with your gun). If so I’d get a Gunsmith to machine me a second dimple although most gunsmiths recommend against it, as it Marie’s you to that particular gas Block.

[@NOTSOSLIMJIM]

So, it's just titanium instead of aluminum. Stainless is much stronger, just adds more weight.

[@DLW23940]

Great video!!

[@teresitamoynagh8471]

Love that tractor!

[@LuisRodriguez-ov7bv]

Really liking your 300 blackout and solvent set up. What ammo were you shooting? It was extremely quiet. You mind giving us a run down of your set up of you AR and which pieces you chose for your solvent can.

[@loigrand]

Good afternoon. Looking for a QD suppressor that could work with a 9mm Pistol and a .45 SBR.. what would you suggest? The SBR is a 3.5 Inch barrel Kross TDI and I do have a couple of 9mm pistols, now the reason for just one Suppressor is that I wont be using more than one at a time.. And I love that QD system on your pistol... Let me knownif there is something you recommend.. Thanks for the video and the time to explain all of this to us.. Thank you!!!

[@Kentucky.Tactical]

My JK is drilled perfectly and isn't as quiet with 8 baffles as yours is with 5. Any ideas what the cause is? Mines drilled for 9mm and is the 155p. Subsonic 9mm is just short of ringing your ears.

[@tristar-tinker_3706]

Try clipping your baffles if your using SuperSonics

[@GaDawg0513]

Try experimenting with the initial blast chamber size. Found 1” to 1.5” initial chamber and sometimes the last chamber size to make favorable results.

[@thastinger345]

Its his mic, when he was shooting without the can it sounded like it had a can on it. These things are loud AF compared to something like a Full Nelson or Sig7.62Ti

[@mohican8860]

u so cool

[@SONofLIBERTY]

KZbin strikes again brother. I’ve been a subscriber of yours for a VERY VERY LONG time. This video came up in my suggested video feed and I thought to myself why haven’t I seen more videos from him lately. I looked over and realized that I had been unsubscribe from your channel. Anyway I’ve never even heard of this company and these products just seem right up my alley. Thanks for sharing the content

[@arikjohnson412]

Griffin CamLok is legit 😎🇺🇸🎈

[@robcoleman6558]

On the griffin cam lok do I need to buy both pieces even if I’m using a booster or does my booster have one end ?

[@stanleyhall6102]

Really like the three lug on pistol 🔫… that’s 🤔

[@URBANAMERICANTAC]

At the beginning of the video, what exactly was going on with that “solvent trap”? Looked like it was rotating and actually had broken sections? I may be completely wrong, it just looked like that via the video.

[@kenhoch3486]

good eye! i think it was the baffles/cups rotating but i could be wrong, would like to know what that was also and if it happens to all of them?

[@grinchyface]

@@kenhoch3486 JK recommends you don't but you really should rocksett the sections together. It's poorly designed. waiting on my form1 on one

[@yanivanhandenhove5720]

Tactical santa is that you hahahah still Nice video from a big fan and greetings from Belgium

[@durrty8]

That's so quiet imagine if you could buy those off the shelf you would save your hearing you wouldn't scare your cattle or your pets and you could get more shots off to get more predators varmint it sucks you have to the pay government to own something that just makes sense

[@blackfacegaming191]

Rich boi

[@MacCready_]

It's stupid, I don't agree with it, but having these multiple attachments for you can MIGHT be considered "extra suppressor parts" by the AFT. Like I said, I don't agree with it, just thought I'd mention it.

[@alec7283]

I'm curious, on the trap that you're using on your .556 drilled larger, for say, 9mm or 300blk? If so, does having the larger hole shooting a smaller caliber effect the signature reduction? Thanks in advance!

[@KimballPrecision]

@fullfofire not a super huge amount though. Really depends on the design. There are some suppressors made for 5.56, yet can take 7.62 because the bore hole is large. Cgs Helios if I’m correct, is the suppressor I’m referring too.

[@offroad6309]

@fullfofire 9/32=.281 vs .308.

[@s-48group39]

Wait... What was goin on at the beginning when you were goin full auto. We're the baffles like melting off or were they unscrewing or something. 👀

[@picklerick9578]

That's why you don't use aluminum for a suppressor

[@s-48group39]

@@picklerick9578 I just wish he answered the question. Not sure wtf happened there

[@superscuba73]

Cerikote flaking off the suppressor.

[@kolbietafoya1672]

Look like the finish was flaking or the baffles were coming loose?

[@ageckomiller]

If you watch closely you can see it's rotating counterclockwise. Unscrewing itself. There is a spot to focus on about midpoint of trap at 12 0clock position. When the video cuts it's almost at 9 0clock position.. They are notorious for unscrewing. I've had it happen and I've seen it happen to someone else. NEVER USE ALUMINUM. PERIOD.

[@robertcarlos5973]

Is a smoke stack considered a suppressor? Or is it essentially a linear blast device/muzzle device? Thanks.

[@GodsLandDownUnder]

Hi there. Great clip. What would you suggest for a steyr scout in .308, I will be using subsonic ammo.

[@alphamale4497]

What did this guy do to love out there lmao

[@glockumollie1230]

Hey guy, just curious what state this video is in because that is some beautiful country. I'm more envious of the background than the AR PISTOL. I COULD SPEND MANY HOURS UP THERE EVEN JUST BY MYSELF. SURE WOULD APPRECIATE IF YOU WOULD JUST TELL ME WHAT STATE.

[@TheofficialCostaludus]

Idaho western side

[@MISERSTYLE]

What state is he in? Wonderful background.

[@ashtonolivares395]

That first take the baffles started to unscrew…

[@tropicaloasis8203]

So is the form 1 that form that you send in like $200 for and gotta wait like 8 months, send in fingerprints and a picture? Im a new gun owner and want silencers.

[@50StichesSteel]

For the price it's better to get a warrantied can...I get the hole Boogaloo thing and that wouldn't be a bad idea but price is a big driver for solvents

[@adamwaffledivision3282]

Easy solution for both cases, stop complying and just keep your mouth shut.

[@50StichesSteel]

@@adamwaffledivision3282 Yeah.....Makes no sense, but OK hard ass lol

[@thewarnerCHANNEL]

@@adamwaffledivision3282 yea... that ain't working. so think of another way.

[@Mangini_baseball_instruction]

Beautiful! And it’s unbelievable that the government is trying to make a man like this a felon. Q

[@cassiusandronicus4023]

Dose it cause harder ware on the end piece if you drill the baffles out for say 9mm but drill the end out for 556? I’d like to have different ends for different calibers.

[@kamikazekunze]

Great Video. Very informative. Sub’d

[@braxtonnelson7976]

Unfortunately while titanium is very tough, it also will start too erode quicker than other options.

[@Kenposhinobi]

Yep! To make a truly battle ready suppressor, I bought their titanium kit and 3 of their 17-4 stainless steels baffles to put before the titanium as blast baffles and take the brunt of the force and “sand blasting” on my 11.5 5.56...also going with the Deadair KeyMo mounting system.

[@OYET-te2jn]

You mentioned POI shift but did not give any real detail. How much POI shift did you experience and at what test range?

[@magorose7382]

Man those prices are crazy… is there a more affordable solvent trap company in the US?

[@tjs2909]

Very nice video. I’ve been looking at these for a while. Thank you for the info. I know just about everyone makes a threaded Glock barrel. Curious what are a few you run? Maybe one or two on a budget?

[@Kaotix_music]

Which version are you running on your bolt gun? HD or Pro!?

[@stevenbailey8478]

I have bought one of these and didn’t realize it was all aluminum. I seen on their website they have a upgrade kit will that help anything at all. I want to use it on a 556 rifle.

[@TheofficialCostaludus]

I’d call them, I run aluminum hardcore on 9mm and 10mm. I have the SBR for my 300blk and 5.55.

[@stevenbailey8478]

Thank you for getting back with me so quickly.

[@FellsApprentice]

@@TheofficialCostaludus is the SBR model safe/effective on longer barrel 556?

[@DGenXer]

Yes sir please sign me up for both of those please sir.

[@bbrlocal]

would love to try out jk but they are always sold out

[@sbuyce1]

Just order, you’ll be in line to be shipped to first. I’ve ordered a lot from them and never had to wait more then 2 weeks before an out of stock item shipped

[@dennisfant2620]

I'm kinda new to the suppressor world. How would the solvent trap hold up, say running one in your training class? As compared to a warrantied one? I have 2 Gemtech patrolmans and 2 gmtch trackers right now 3 of them are still in jail. Good information on them though.

[@rockydubois2418]

The titanium will hold up well

[@jalenking4117]

A pcc can not be a 5.56 or 300bo it literally means pistol caliber carbine. 5.56 and 300bo are not pistol calibers therefore not a pcc

[@timandrews4722]

How well does it reduce noise? Does it work well with 308?

[@chanceprice5376]

What attachment piece did you use for your glock?

[@tf201]

Does the strainer reduce back pressure?

[@mrvoltman1921]

What are your thoughts on the "blow-fwd", OSS/X2DevGroup, type suppressors for gas pistons? I am looking into them as to not having to keep changing gas settings. Yep, just lazy...Well kinda. RFB really doesn't like being suppressed. TIA, Brother

[@X-factor-influnecer]

Why not use the cherry bomb and plan b mount option.

[@anomalyevolution40]

Maybe someone can answer. Why are you still wearing hearing protection if silenced? I have never shot anything silenced. I'm thinking about joining the club but I want to make sure I could ditch my ear protection and enjoy plinking targets.

[@TheofficialCostaludus]

22, no need for ears. 9mm 45 yes subsonic. Even blackout subsonic I use ears. There is still a snap. However that’s for sustained. If I have to pull my 5.56 out of the car. The can will help.

[@ja5onl6]

Every time I go to the site over 1/2 their stuff is out of stock. There is obviously a huge market they need to ramp up production or hire more people.

[@sbuyce1]

Just order what you want from them even if it’s out of stock. They send out first to existing orders so your wait is usually less then 2 weeks. If you wait for it to be in stock before you order, you’re going to have a long wait.

[@Savage1776_]

Their prices are extremely high for a do it yourself kit...I could get the Omega Hybrid 36 or 46 for the same price

[@jamesdean257]

Are these still legal? Can I purchase one for my father? He has nfa stuff and would like making a new one.

[@roush0741]

But if you can never find them to buy them and no one never has them in stock what's the point

[@Mark-ig7jo]

Who makes your jacket? The blue hooded soft-shell with the pockets.

[@robcoleman6558]

Hi , I’m new to this . I like how on the pistol you did that quick change device. Where can I find it ? I think you said it’s a griffin product.

[@robcoleman6558]

Never mind . I found it griffin cam lok

[@chriswilson1215]

Damn wish the sbr one was out when i bought mine lol

[@0422andrew]

Awesome video! However i would definitely do some research on one of your suggestions. Once your form 1 is filed whatever length is on your stamp is what your can has to be. You CANNOT add or subtract any baffles without breaking the law. Love your videos and dont want to see you get in trouble nor would i like to hear about any followers getting into legal trouble

[@TheofficialCostaludus]

That is very true. Thank you

[@sbuyce1]

You can subtract the length, you just can’t add. When you do the form 1 you put the longest length that you are going to use. You are allowed to be shorter. A few companies are now making modular suppressors now where you can remove baffles to decrease the length. Sig has one coming out and the rugged radiant is another www.silencershop.com/blog/post/whats-a-modular-silencer

[@simply_based]

that's just not true, there are many man modular suppressors made specifically to be able to change the length of it

[@simply_based]

Is there a specific reason you have your red dots so far back on your rifles?

[@constitutionalqrf1713]

ehh..... I've form-1'd 2 low pressure cans (.22 &9mm) for about 250 bucks each (including having them professionally engraved and cerakoted). For higher pressure stuff, I agree with 50 stitches, I'll stick with my store bought and warrantied cans.

[@constitutionalqrf1713]

I've bit the bullet and got one. $700.00 for the package and accoutrements to direct thread it on a PCC. at least the form-1 only takes 27ish days.

[@skunkysmokes2478]

A PCC in term is a pistol caliber carbine meaning a carbine shooting a pistol caliber, not rifle calibers

[@son_of_guns]

To be fair I thought the solvent trap was meant to be a hack into the suppressor, it seems that this has fell victim to the same gun bs, I don't know the info but price wise but I remember being able to get one for almost nothing

[@SheepdogColumbus]

Can anybody help me out? Looks like Chris was running an SBA3 on his AR pistol but it looked like the vertical rubber parts were cut off. I zoomed in to see if he folds em in like I do, but it looks like they are no there. Am I right about that, or are they there, or maybe they were removed?

[@MrAdorabao]

Do we still have to get our form 1 before buying?

[@gofortitwithcody]

What is the product or part number(s) for the pistol set-up talked about?

[@kimbellbush1857]

What three lug is that on the pistol at the end?

[@josh2711]

Pcc chambered in 300 blackout and 556??? I thought it stood for “pistol caliber” carbine….

[@roofrat68]

What do you recommend for a 7.5" .300 blackout, and a 10.5" 5.56?

[@kevinjo9868]

What Holosun was that on your pistol at the end? Thanks

[@smokethirteen]

Awesome!

[@yotamonster]

Dude just wanted to show off the tractor

[@ryusekai]

Wait... what's the point of adding length.

[@greywood84]

Didnt jkarmament get raided by the ATF, some time ago?

[@thomasjefferson3552]

Would it be safe or work on a 22lr in a 223 ar15 with a cmmg 21lr conversion bolt?

[@billb9806]

Who makes the war eagle muzzle device? Where can I find one?