Joe’s AllStar Tools: The BIG Stick Prybar by Mayhew ! This thing is a beast! Check it out!

[@zaxfee.]

lets go. finally! a video that doesnt start with a 20 min build up of dollars going into a bucket

[@ViperMods_216]

Right lol

[@rottenrobbie66]

I’ve used the Mayhew big stick for years now. -It takes no prisoners and is never denied. It’s part of my “ Implements of Destruction” kit

[@mike4796]

“What cant be persuaded Must be forced!”

[@JimmyMakingitwork]

“Given a fulcrum and a long enough prybar I could move the world!”

[@bluefj-wc3vz]

Mayhew is a great American tool company. 🤘🏻🇺🇸

[@jonathanhill7295]

@@siriosstar4789 yes sir, if you have any big name tool truck brand (save for a few) pry bars, punches and chisels made in USA they are most likely rebranded mayhew tools

[@joegriffin66]

Got a lot of nice mayhew pieces this week that would help with any size job. Happy Anniversary Mr. Joe.

[@elora2525]

That pry bar seems like overkill for automotive use but is one of my favorite tools. I have the Cornwell version and got it for $120.00 as he couldn't not sell it.

[@JH-qi7fz]

Joe is bringing his A-game this week with pry bar! Very nice!

[@gregorythomas7438]

I have that pry bar and it is awesome always looking for a reason to pull it out even when it’s not necessary 😎

[@dakotadrake3842]

Those bigger pry bars sure save your butt when you need one. I own Cornwell's 60" pry bar and it makes changing tracks on skid steers and mini excavators a lot easier.

[@Shaun_Jones]

Makes sense, considering that tool is also known as a tanker bar. It’s literally designed for changing tracks on full-size tanks.

[@asmautollc]

The Big Stick is 7/8” thick (not 3/4”) and 54” long. I’ve owned one for a while and it’s The Prybar 👍👍

[@thinshadow551]

I was gonna say.

[@branned]

Tool truck carries HEAT. 🤣🤣Tought neighborhood.

[@KoonTrucking]

Gotta pack man, always be prepared

[@workingmanpatriot8760]

Next week makes 27 yrs as a welder in a machine / job shop, can certify that mayhew makes the best punches on earth!. Period!

[@sledsports]

You guys are starving poor ol Joe out. He's getting skinnier and skinnier

[@jw7037]

Branson is fun..I'm about a hour twenty mins south of there between bull shoals and Norfork lakes..and all the rivers..nice area!

[@danieltubbs458]

Joe sure does fit a lot of tools into a little bit of space!

[@stephenross9282]

My Matco dealer has one of those on his truck and there I'd some old man in the past that said " you can move the earth with a big enough pry bar"

[@felixf5211]

The "old man" was named Archimedes.

[@zo6rwhp]

I use that bar for turning fly wheel on 3516 cat engines for pulling out piston and liners 😎 for automotive a little over kill for 3516 engines perfect

[@gregcothrum4045]

Great video y'all have a great week and stay safe 👍

[@dalebennett5227]

Mayhew prybar and punches are great

[@Hipsters_N_Hippies]

I just can’t believe that damn truck is running. I nearly forgot that he had a tool truck.

[@1hasbeen531]

For that kind of length/leverage we always kept an old school "pinch bar" at the shop.

[@BuiltOverBot]

My wife calls the pinch bar my wallet opener apparently she thinks I am tight. You know your a man if you can bend a pinch bar.

[@mitcarpenter5466]

like the looks of the bearing punch set

[@michaelhorn4540]

I've got a set of mahew prybars and screwdrivers. Excellent tools

[@coscobbob]

Eastern Rigging Supply has bigger pry bars than that. They are primarily used by riggers and machinery movers.

[@jameswatkins7278]

Looking forward to the drawing next week

[@AndrewM83]

It's funny you say that about the newest Matco prybar grip... I got the last generation Matco prybars and I AIN'T getting rid of them! I love em!!

[@felixf5211]

Same.

[@SUMDUDE.]

I have 2 of them prybars and love them!

[@michaelstjohn6086]

100% right, I have been buying all the old style matco bars!

[@andybrooks4070]

just bought the mayhew pro 48 and 58 inch pry bar, couldnt bring myself to buy the snappy although i really wanted to, to finish my set but the only thing im using the big hog for is taking tracks off the bobcats and thats about it

[@hilltopmachineworks2131]

I have the 48" and use it to move machinery around with.

[@engineer1345]

I believe that pry bar is 7/8” not 3/4” they make a slightly shorter one in 7/8” as well

[@Dubsspeed]

Agreed

[@engineer1345]

The extra weight is nice too when chipping ice out of the end of culverts, I live in the north. 😣

[@felixf5211]

The 44" is 7/8", IIRC.

[@midatlantictools]

Mayhew make some nice tools..!

[@mikeholubek4419]

Great reference to Sheriff This generation will never understand

[@jameswatkins7278]

I’ve seen the story about him but I’m sure it doesn’t do his legacy justice

[@larryborkstrom3580]

Now that's a pry bar

[@DannyAllen10271966]

Give me a valid reason why snap on tools that are mostly rebranded cost so damn much...

[@KoonTrucking]

Well honestly …… because people pay it. They charge more and more because we keep paying the prices they ask. I know stupid right? But that’s the truth !

[@coreysuttles1362]

Good stuff as always, short one today!

[@P46345]

That pry bar will do some damage and it's longer than anything in my gun safe, but just because you're out of sight doesn't mean you're out of range. ;-)

[@johnnyramirez9082]

Joe watch your strong side if your going to carry

[@egx161]

Wish Mayhew would make Brass or bronze tools. Thanks

[@kylesonsalla7620]

They have brass punches

[@Austinthoms5575]

Early Early today. Hey Clay i know you love ratchets i hope you check out the Koken brand ratchets some time. They look incredible.

[@chadmcgowen9707]

I got the same rebranded pry bar new from matco for 180 .

[@studboyspark]

$116 on eBay

[@chadmcgowen9707]

You can get me a 58 inch in green on ebay thats really matco or the Mayhew?

[@studboyspark]

@@chadmcgowen9707 the 54”, 7/8 shaft mayhew.

[@momentumtintdetail]

You guys c’mon BOP!!!

[@damnitdang]

I need a good big 48"+ prybar, one that doesn't flex much. I tried the matco. It could be better

[@KoonTrucking]

Matco is just Mayhew prybars with the Matco name on them

[@damnitdang]

@Koon Trucking how's the actual snapon 54"? You think they use better steel?

[@mooseknucklegarage8439]

I’ve been waiting to buy the Mayhew pry bar set to go on sale on prime day but they didn’t 😩

[@Toyotas_n__Tools]

Clay im almost 99% sure the new matco pry bars are made in Taiwan now, even the pliers that look like the old channel lock made sets are Taiwan made now. Matco is just becoming a Taiwanese private label with gearwrench made tools for the majority. I think thats a big reason they don't wanna go totally blue handle everything since it would take over sales of the private label cornwell tools that we see with other brand names like gearwrench.

[@felixf5211]

AFAIK, Matco severed their relationship with Apex two years ago. This lead to the repositioning of the Sata line.

[@Toyotas_n__Tools]

@@felixf5211 I agree now that I'm starting to see that more and more of their items are switching away from gearwrench also but they still have a few apex made tools. I think once they sell out of their stock in them they will introduce something from a new manufacturer. Astro pneumatic is a big time private label tool maker who makes tools for lots of different brands who have a licensing agreement with the seller of the tools and so you won't see those tools in a astro catalog for sale.

[@guacamoleweiner69]

Nope the pry bars are still rebranded mayhews USA. But yeah everything else on matco is tawianese

[@jonrusso59]

I need two of those right now one for the shop and truck too....tell me how to get them now too..clay please too.

[@KoonTrucking]

You can get them online. Amazon should have them

[@jamesupton143]

@@KoonTrucking Just checked. Amazon is $131.

[@MrErock62]

@koontrucking we were just talking about this!

[@spacecat7247]

Nice....but oh the coin 😮

[@Hipsters_N_Hippies]

3:20 Just one problem here, yes the handle is made in the USA. This happens to be Another slightly misleading USA label product. But at least they admitted it more or less in their video called 👉🏻 Curved Cap pry bars | Mac tools

[@kylesonsalla7620]

Mayhew bars are all USA made, including the bar itself

[@felixf5211]

@@kylesonsalla7620 Yes, the company has been making tools in Massachusetts for about 150 years. Don't you just love Internet eggsperts?

[@donotrobme9295]

Joes too broke through the rubber of his big stick. Girth

[@michealwagoner4301]

I got one on amazon for 100 $

[@cooter.malone]

3

[@TWR358]

2

[@michealwagoner4301]

Same bar better price

[@jeffhurley3548]

Or your fingers sorry jpp

[@lonnylance6184]

You always say can't beat with a stick, but your wrong..not to be mean but it's all China shit and you can go to Walmart or others places and get everything a hell of alot cheaper...for anybody wondering about it....

[@Falfire122]

Mayhew's plant is in Turner's Falls, MA. Try again.

[@KoonTrucking]

That prybar is USA made …… it’s Mayhew

[@studboyspark]

Even Walmart sells USA made (Wilde) pry bars!

[@tommyellis7728]

@@studboyspark and the hard handled Hyper Tough

[@pico67ss]

That dominator pro handle is similar or the same as the old matco ones I just completed the full set today