John Deere 1025r | 3rd SCV and Hydraulic Top Link Install

This video shows how to install the John Deere BLV11217 3rd SCV and AgriSupply 090599 hydraulic top link on a John Deere 1025r. There are only a couple of small differences between the 1025r install and the 1023e install should anyone with a 1023e should be able to follow along. The JD 3rd SCV kit works with both 1025r and 1023e. The kit is also compatible with mid 3rd hydraulics and independent mower deck lifts.
Parts List:
John Deere 3rd SCV BLV11217
www.greenpartstore.com/John-D...
Summit Hydraulics 1/2" Quick Connects
amzn.to/34wLjQo
090599 Hydraulic Top Link
www.agrisupply.com/top-link-c...
Qty 2 - 42" x 3/8" Hydraulic Hose
www.agrisupply.com/hydraulic-...
Qty 2 - 3/4" Male ORB to 1/2" Female NPT Fitting
www.agrisupply.com/male-orb-p...
Qty 2 - 1/2" Male ORB to 3/8" Female NPT Fitting
www.agrisupply.com/orb-malex-...
Qty 2 - 1/2" Male NPT to 3/8" Female NPT Fitting
www.agrisupply.com/hydraulic-...
Loctite 545 Hydraulic Thread Sealant
amzn.to/34sasvo
0:00 Start
1:24 Disassemble Fender
10:42 Assemble SCV
17:12 Install SCV
18:30 Assemble Lower Quick Connect Bulkhead
12:18 Install Quick Connect Bulkhead
22:11 Install Hydraulic Lines
36:44 Reassemble Fender
39:27 Hydraulic Top Link Install
46:28 Working Hydraulic Top Link

[@DavesRetirementProjects]

You just lowered the intimidation factor for me. thank you

[@atslastname5624]

You did a superb job of visually demonstrating the job. Excellent video. Thank you!

[@American_Heathen]

Thank you for this video. I was looking at getting this top link for my little Johnny. I am always adjusting the top link between the planter, tiller, box blade, scrapper and other attachments. This makes everything easier

[@11jt2007]

I was considering this, after watching your video I’m definitely getting it. Thanks!

[@MikeGetsItDone]

Nice job. Very helpful walkthrough.

[@sawtooth4615]

I've had my hydraulic top link for about five years now and I love it. My tractor already had to remotes so the it was an easy install.

[@chrishansen169]

Great in depth explanation on all that is to de done.

[@oldNavyJZ]

Great walkthrough. Thanks for sharing!

[@tfunkhou88]

Really well done video, great job!

[@dennismackey3973]

Great Job, that will be very helpful. Thanks for sharing.

[@joecahill8165]

This is awesome! Thanks.

[@wraith3951]

I used the same kit on my 1025r last summer and it has been great except the Agri Supply Cylinder is crap. It creeps and bleeds down to much now i have to search out a cylinder that has the check valves on it 😞 Definitely a worth while investment and saves a ton of time when working with your implements!!! Took my TR3e/ TR3 to a whole nother level once i got this done!

[@stephenacello9173]

You need a check valve with that cylinder.

[@WEBAIRAviation]

Did you find a different top link cylinder to buy?

[@Ladaniels83]

Great video, I had never seen this kit. I stumbled across it while looking for the loader 3 scv type kit. Wonder if they make something like this for a 21 2025r w/power beyond already installed. On to my youtube hunting I guess. Thanks again, very helpful!

[@winkdinkerson7190]

Good job.

[@joelnickerson6739]

You did an awesome job. Where did you get the kit to hook up the top link?

[@patlyle2621]

You should open a school and teach people how to make a good video. Great job! How much was the JD kit and what was the approximate total parts cost?

[@patrickmccaffrey5807]

Thanks for the thorough walk through. Now that (I’m assuming) you’ve had a chance to use it for a while how do you like the positioning of the valve handle? I’ve got the factory third function on mine and have decided to run lines from that valve to the back so I can just use the buttons on joystick to control a top link. Obviously it’s not a dedicated valve and I’ll have to unplug and plug to use grapple, but I like the ergonomics of it. Question for you..the extra coupler bracket included with your kit for the older 1025r, are you interested in selling it?

[@MJF40]

Wonder if that kit works if you have the backhoe and all the plumbing ?

[@wraith3951]

How are things working out with the Agri Supply Cylinder?

[@silverrhinomedia196]

So far so good.

[@randomdude4376]

This is a good video. However, it seems like a colossal job to just gain one function. So instead of doing this entire job, why not add a power beyond circuit first, and then use that to tap into for all other auxiliary hydraulic needs? You’ve basically just installed a power beyond circuit, but connected it to only one single spool SCV. Not much of a gain there. I’d estimate that that kit probably cost between $500 and $1000 with all those hard lines. You could’ve designed a custom power beyond loop with two flexible manufactured hoses and the correct fittings for probably less than $200. And then added a single spool SCV to that for controlling the top link. Or even better, add a 4 or 6 spool SCV, and have many functions available for future hydraulic implements. Not to mention, you’d have a power beyond loop for attaching a backhoe, etc. Again, this is a good video you’ve made, but the kit you’ve spent many hours to install has barely gained you any useful function. Could’ve done the same amount of work, spent a lot less, and got a lot more functionality out of your system.

[@silverrhinomedia196]

I’ve spent many years customizing cars and motorcycles. I do a lot of metal fabrication. When it comes to hydraulics I am not as well verse. I also hit a point in life where I enjoy a clean bolt on factory solution. I forget the exact total but it was less than $1000 and gave me all the functionality I need, which is a hydraulic rear top link.

[@2015_Rubicnn]

No comparison to the fit and finish of the oem kit.