John Deere 1640 Fitting a Rear Crank Seal

[@FranciscoGO1980]

I had to do this one time, it would have been impossible without the tool. Best $300 my employer spent that year.

[@BundyBearsShed]

Yep you need the tool for sure.

[@irwinmccook7942]

Another great video!! You can never have enough specialist tools, I have gathered up a lot of Deutz & Kramer tools over the years & they ake life so much easier!!

[@BundyBearsShed]

I agree Irwin, A little time spent making good tools is well worth it for years.

[@charlesvanderwolf5751]

Well done Lance !! You have really showed your experience in fitting that seal. Regards, Charles @ Nerimbera

[@BundyBearsShed]

Thanks Charles.

[@Tf9500]

I don’t have many videos up but a few years ago I did a short video of using the tool to put a John Deere seal in. Your video is a lot better, I didn’t say a word when I did mine ha!

[@BundyBearsShed]

I just snuck over for a look, good stuff.

[@terryjohnston7162]

Great video. So you don’t need the protective ring with that type of seal?

[@BundyBearsShed]

That is correct

[@mertonflynn6227]

Bundy great video and thank you v much. Question- with a JD 6068 engine, 10000hrs, with rear main crank seal leak, engine otherwise running great, some blow by, do I need to think about engine rebuild or just do the seal??? thanks Mick ireland

[@BundyBearsShed]

Do the seal first and see. If it doesnt last say 500hrs or more the engine may need work but do the cheap stuff first.

[@ShainAndrews]

Squatch does some impressive work on some real relics. How do you drop something around an open bucket and miss? I can have an open bucket 20' away drop something, and I swear it teleports itself to the bottom of the bucket.

[@BundyBearsShed]

I watch him too, interesting and a good tradesman

[@luioliver1727]

Someone notes that oil seal has a direction arrow stamp in rubber, it's in Wright direction??

[@BundyBearsShed]

Sure is it cant really be fitted back to front with the tool JD uses. It has been a few years since the video and it doesnt leak a drop.

[@BleuJurassic]

really cool tool there are quite a few motors that would work on guess its out to the machine shop

[@BundyBearsShed]

The tool works on a lot of John Deere products but I see Isuzu uses something similar as well.

[@lelandrentz755]

Thank you for sharing your expert knowledge

[@BundyBearsShed]

My pleasure!

[@davidhall4914]

Hi Lance, catching up on older videos of yours, but I cannot find one on a grey fergie, any information would be greatly appreciated. Dave from England. ( thank you for the previous reply).

[@BundyBearsShed]

Coming soon! if you are looking for the rear crank seal

[@Sopin95]

Can you give a numer this tool

[@BundyBearsShed]

I put a diagram on the www.queenslandtractorspares.com.au website in the technical section.

[@lukaszpuma]

hi, can you save the dimensions of this device. Greetings from Poland

[@BundyBearsShed]

I will see if I can get someone to draw it up.

[@lukaszpuma]

@@BundyBearsShed OK thank you. I have already mentioned it for the third time and it leaks every time.

[@shyamsinghparihar9778]

Any job in Australia for tractor mechanic

[@BundyBearsShed]

No Im sorry some of the big companies may have something.

[@shyamsinghparihar9778]

@@BundyBearsShed ok thanks

[@charleshart6992]

Very neat!!

[@BundyBearsShed]

Makes life easy.

[@dartmoordave]

Lance, just an engineer talking. Why not have a boss on your tool to locate in the crank to ensure alignment?

[@BundyBearsShed]

Steel inner on the cassette seal so this tool it lines up well and slips over well.

[@dartmoordave]

@@BundyBearsShed I'm off to find a JD tool locally, fingers crossed.

[@BundyBearsShed]

@@dartmoordave I have drawings if you email [e-mail]

[@bfeca96]

​@@BundyBearsShedsent a mail, can you please share the drawings of this tool?

[@AbdouMazari-q4m]

ترجة مفهمت

[@ManoelSantos-xu7eu]

Que Pôôha é Essa ?

[@BundyBearsShed]

Rear crank seal.