John Deere 4066R One Year Review

[@Cater821]

I also have a 4066R for about one year. Here are a few follow ups that happen to mine. After 7 to 9 hours the Hydro transmission went out. Literally could not move the machine more than a crawl. Dealer replaced unit and has been flawless since. Fuel gauge does not work properly. I have ran it out of fuel with the gauge showing 1/4 left. Have to watch that. I totally agree about the hydraulic lines. I have zip tied them up and they still rub against my hood which makes me mad. I know some people would call this machine junk because of trans issues but dealer was great and love the machine overall. OH, P.S. I have 57.9 hours over one year and have regenerated one for the DPF. I regenerated while I was shredding the ditches at the farm. Just a FYI. Let me know if you have any other questions regarding my tractor.

[@mmrbeef]

Thanks for the info! Always great to hear about other units from owners. That stinks about the trans issues. I have not had any issues with mine yet. I am pushing 105 hrs now and I think around 98 hours it did a full regen. I am not sure if I have done a video on that yet or not. I will have to look and do an update! Thanks again for the comment!

[@Cater821]

keep the videos coming, dig you stuff man. keep me posted on the progress of your 4066R.

[@neilbreen9041]

If you want to "regen" or whatever it's called, just put a plow on your tractor and make the tractor struggle. It also cleans the piston rings.

[@ChampionsForever]

Hey Sir, Good review! This is your neighbor! Thanks for bringing over your mower manuel and helping me get my JD mower going last summer.

[@mmrbeef]

Things like that are always fun!! Thanks for helping out with the garage door! Since you are watching reviews, does this mean we might have matching machines in the near future?

[@ChampionsForever]

@@mmrbeef yes, I have been keeping my eyes open for a 4720 or a 4066 with a cab. That last winter was pretty brutal.

[@ChampionsForever]

@@mmrbeef if you see a used one on your research, let me know. Thanks

[@mattn9628]

I have a 4044r at 413 hours and I completely agree about the lines from the loader. My lines will actually hit the front tire if I turn sharply. Took to dealer and they zip tied it up. Which lasted less than an hour. This needs to evaluated by John Deere.

[@mmrbeef]

This is actually one of the few true complaints I continue to have. I've spent almost 40 hrs in the machine in the last 30 days and it has given me a lot of time to think and watch.

[@PJLDaily]

Very good review here ! Thanks for sharing ! Looking forward to see what other videos you have as far as use of this rig !

[@mmrbeef]

Thanks, there are many videos spread across the channel using the 4066R.

[@jeffslaven]

This looks like a fantastic little utility tractor. I actually am quite impressed after seeing your video. My personal favorite would be the 5R series for this role as it gives you so many more options. However, this would be in a perfect world where the cost would not be a factor.

[@mmrbeef]

So far it has been a great addition to the fleet and has performed every task I have asked it to do. I wish I had a few more attachments to let it work some more!! About 6 months after I bought the 4066R the dealer had a 5115R with loader on the lot that I test drove... What a machine.... slightly larger and about the only draw backs were the Cat 2 3pt and the price tag... with loader it passed the 6 figure mark and kept going.

[@gman007ize]

You're looking at like 70 - 80 grand for a 5r though

[@remingtonwells5638]

@@mmrbeef I know I am very late to this video, but we just got a 5045 E for our farm, it is the smallest utility tractor you can get from Deere. We absolutely love it. The loader can lift over 3000 pounds, 3600 to be exact. We have pushed live tress over, and I mean not sapplings, big trees.

[@remingtonwells5638]

@@mmrbeef you drove a R series machine, however, you can get a smaller tractor in the E series, however still super super capable.

[@Harikarikillboy]

@@gman007izethe 5075E list price with cab/AC is only $43k and change. $25K less than the new 4075R. It’s cheaper than this 4066R. Best value on the market.

[@scottlambe7987]

I would agree with some of those items you mentioned. I have a new 3039R and the plastic molding in the cab is poorly put together, the filter molding hangs down on mine too, its gets very dusty inside as well when working in that environment, windshield wipers are totally useless, hydraulic lines are too close to the body causing a rubbing and paint issue. The 3039R is extremely tippy, or at least feels that way.....scary at times, going to add wheel spacers but that violates the warranty on a 3039R ? Whaat? I just had mine go in for its 2 yr service I bought, so I will know more about it after it gets returned to me and there's a $##%'n bill? My 3rd valve function just stopped working after 30 minutes of use. I absolutely love my Deere and the cabs are the most luxurious, I just wish they could perform these little things better to hold their reputation. I don't think I could buy an other manufacturers tractor. Lets see how my dealer takes care of my Deere for any issues they find. I may upgrade one day to a 4066, thank you for the post.

[@chrisallchin1536]

Great review. Keep the 4066r videos coming

[@mmrbeef]

Thanks! I'm sure there will be a few videos coming up.

[@RockhillfarmYT]

Does it come with skid steer attach on the loader? I was expecting to see the John Deere attachment system that is on my 2038R

[@mmrbeef]

The skid steer attachment is an option you have on the 4 series. You will have to check on the option for other series of machines.

[@Puckgrinder85]

The whole issue with the rod between the loader arms. Is the lower rod not what keeps them symmetrical? There has to be a rod between them or only the arm with the least resistance is going to move. That rod should be what ties them together. It's also the reason you dont lift anything without an attachment on, those arms aren't super sturdy to take weight, the only tie the arms together, once locked in the attachment is the stressed component.

[@shangrilaretreat]

i love john deere BUT i totally agree with you about the wipers!!!

[@superjeepdad]

My wipers work fine but the washers weren't aimed from the factory. After I adjusted the washers, they work very well.

[@bryansteen2219]

I want to get a 485 backhoe, but your saying if you have the down force kit ,you can't have the power beyond.

[@mmrbeef]

That is correct according to the sales manual. Now why you can’t have both is unknown - interference of parts? Hydraulic flow issues? Etc etc

[@Puckgrinder85]

April 2018? Wisconsin? We got 3 feet in our county over 2 days. Was a hell of a mess.

[@lukedaoutdoorguy7639]

I really like your 4066r videos! Thanks for the review. My 4066r is coming on friday!

[@mmrbeef]

Thanks! Glad you like them. I will have to watch for your thoughts on the 4066R.

[@aaronbrittain5176]

mmrbeef what is the standard width of the 4066r without wheel spacers?

[@mmrbeef]

I will have to get a tape and measure it. I am guessing somewhere about 70-75 inches.... but that is only a guess.

[@aaronbrittain5176]

mmrbeef ok thanks. I know I’m getting one but I was I was having a tough time finding out the width. Because I plan on buying a Deckover tilt trailer with it that’s under 10k GVWR

[@LakeJoe]

Hi, do you have wheel spacers on your machine? Is it worthwhile? I am about to take possession of a 2021 4066R and I have my spacers leftover from my previous 3R that I could install if need be. Let me know if you think it is a good idea, thanks. Great review video@@mmrbeef

[@weswilliams9325]

Can’t wait to get ours!!

[@mmrbeef]

Congratulations!

[@jhofster4057]

Hey I was really curious where I might find the SSQA actuator setup you have there? I would love to put that on my 4520!

[@mmrbeef]

The adapter was an option when I ordered the machine. The electric actuator was a custom fabrication. Ordered the actuator from Progressive Automation and purchased and modified a few items from Deere. Some folks prefer to go the hydraulic route which, if you have a 3rd unused spool, works fine as well.

[@jhofster4057]

@@mmrbeef thanks, I appreciate the info!👍🏻

[@garycrumrine9538]

Deere is probably being over protective on the downforce issue. I could see a possible situation where the 3 point could be put into a bind condition at the extremes of the top link, but if you turn off the downforce when you are using the hydraulic toplink, I see no reason for concern,

[@nfdbb6906]

If you domt mind how much did this cost you from the dealer?

[@mmrbeef]

What I paid isn't a good representation of current prices. I ordered it in May of 2017 so the price has gone up substantially since then. I did get about 13% off list price, however, two items can factor into that discount. 1) I purchased a number of kits (hydraulic, loader, etc) for the machine which requires set up. The dealer got full set up prices which IIRC equated to about $7,000. It easy to give a little on the tractor since they were getting paid for the set up time. 2) Given the supply issues right now I would suspect discounts will be minimal. Based on current pricing I would suspect most new 4066R's with cabs and a loader will be in the $60,000-65,000 range. If you add a couple of kits (downforce, power beyond etc) and a couple nice attachments I could see a well equipped 4066R sitting at $70,000-80,000.

[@abvuk95]

Totally agree about wipers !

[@DaileyWoodworks]

Thanks for this overview. I was going to get the 3039r but now think I’ll bite the bullet and get the 4044r (open cab) Question are the bolts metric or American?

[@mmrbeef]

Pretty much everything is metric on these machines. Glad the review was helpful.

[@chetlovesamerica3085]

Did you add h20 to all 4 tires??,,I put 3/4 full on all my tractors tires.turns your tractor into a TANK ♡♡♡

[@ethanslife4206]

The skidsteer plates the one is tilted foward I would put a rod running across the 2 plates

[@mmrbeef]

Correct. I have considered adding a rod between the two plates. The problem become interference with either the attachments or the linear actuator. I've test fit a couple different ideas and my most recent one was to lock the cylinders together with a rod. Just takes a little time to figure out how to solve the issue.

[@ethanslife4206]

Right

[@roadracingmustang]

I didn't know the skid steer attachment was an option from JD. I thought they had their own system of quick attach. The generic skid steer units I've seen have a rectangular bar welded between the plates so there is no way they could become offset like yours are. This may prevent the self leveling from working though. I don't know how that works. www.ebay.com/itm/John-Deere-145-146-148-158-Pin-On-Loader-to-Skid-Steer-Quick-Attach-Adapter/332918026150?hash=item4d8375efa6:g:E64AAOSwBahVZPZD

[@goodboyringo9716]

My only complaint is the cost. Buying a Kubota

[@brewerpop]

Great video! I have a 3203 now but need something bigger to move round bales. I'm looking at a 5500E but my dealer suggested I consider a 4052M. Any thoughts on the 4000 series ability to load/unload round bales?

[@mmrbeef]

I think it would be ok for smaller round bales. You would need some good ballast to be efficient but the machine can do the work. Mine has no problem with repeated 1500 lbs lifts and doing the job efficiently. I think once you cross the 2000 lb barrier the stability of the machine will slow production.

[@shangrilaretreat]

we have a 4600 deere probably the more versatile than 5 e series 4600 and the is the only tractor we use to move round bales plenty of power and weight we bale 4x4 roles and you can fit it under a small shelter and use a tiller etc 6 foot bush hog is on the heaver side of its capability

[@rgj5832]

I have a 4052M I use it for brush cutting and land clearing I have the power reverser transmission. I beat it in the face every time I use it and it hasn't let me down. I think it could handle bales but you will need some weight added.

[@donniebargo964]

Friend almost every reviewer on here no matter what brand is people with almost no hours on their equipment. Work the machine hard and then do a review. I bought one of my tractors in November 2019 and the other in March 2020 and this is February 2022.both my machines have over 500 hours on them. Don't want to offend you but you have had a lot of problems for the number of hours on it my stuff gets worked hard and I have had 0 issues. With mine but I own 2 different brands.but work like your living depends on it and then do a review. Because my living depends on my machines that's why they average 25 to 30 hours a week on them.

[@mmrbeef]

If someone like you offended me I certainly would not put videos on KZbin. The key thing to understand is that there are different types of users..... in my case I put on ~75 hrs a year and the 4066R has done everything I have asked of it. I would certainly hope a person using a machine commercially would do their own research and use more than KZbin videos to make their decision. Taking input from all available sources is the key to making an informed purchase. The thing that shocks me is that you are critical of folks who make videos for the low hours on their machines, yet when I click on your profile I see no videos about your impressions of your machines. I would certainly value your thoughts that those types of hours on a machine in a limited amount of time.

[@aaronbrittain5176]

What is that standard width without the wheel spacers?

[@mattbarker7739]

Nice tractor, am in the market for a tractor still not sure what size, merry Christmas

[@mmrbeef]

Thanks, glad you found it useful.

[@thomasobrien7863]

There is A BIG Problem with this model and Other New John Deere Tractors! NO SKID PLATE and John Deere does NOT Offer one!! I have Had Damaged Front Steering Hoses Twice because of this!! This is a Brand new 2019 4066R with cab! The Dealer will NOT warranty the hoses even though Other Owners have Had the SAME problem! I have a 1960 IH 240 Utility and it needs NO skid plate for protection and I have a 1980 John Deere 2040 and it also needs NO skid plate to protect the Undercarriage!! John Deere has turned into a Sorry Company!! They also will NOT warranty the Glass Door that shattered while being Towed on a trailer at 35 mph!! I will have to fabricate a skid plate which I should NOT have to Do!!

[@harrimanfox8961]

Tractors don't have skid plates

[@mmrbeef]

I find this comment interesting. Base on your description of the issues it sounds like you might have been better off going with a skid steer. I looked at my hoses last night and you would have to be in some tall brush/rocky terrain for something to contact those hoses. Deere only offers a few skid plates for tractors and most of those are related to backhoe installations. I would think a cab door busting (while rare it does happen) would be an insurance issue vs a warranty issue. It would be one thing if the door busted randomly while sitting but going down the road when a rock or some other item could have contacted it makes it seem like insurance would be the source to cover the loss.

[@rgj5832]

I use my 4052M for some pretty sketchy land clearing and I haven't had an undercarriage issues. I however have been surprised that I haven't had and issue and often wondered why this isn't more undercarriage protection. That being said I have to remember this is a farm utility tractor and I honestly need a tracked skid steer for what I am doing so if I damage it that would be my own fault. These are good tractors I think!

[@leejproductions27]

Although I don't know too many people that do it that way. It is recommended that you tow the tractor facing rear, so the wind can't rip the doors open. Also it will keep the turbine from spinning.

[@jmgredgreen4x428]

Are you going to get a snowblower for on the back of the 4066r?

[@mmrbeef]

Eventually yes I will. Hopefully at some point I will get a front 3 point and PTO and put a blower on the front.

[@jmgredgreen4x428]

@@mmrbeef I just added the front PTO kit on my new to me John Deere X575 and I will be getting a front mount snowblower for it soon.

[@miroslavcajka6261]

What is the price of a tractor in the USA?

[@mmrbeef]

In the US as seen in this video I would expect to pay between $48,000-$60,000 depending on options and optional equipment. Attachments would be more.

[@311hitwall]

@@mmrbeef Ridiculous money

[@rgj5832]

I bought a 4052M with the 400 loader a 6ft cutter and a 14k trailer for 33k it does however have the power reverser transmission which I thought I would hate but now love. 0 percent financing for 84 months with 5k down can't go wrong!

[@M6706-u5y]

Great video, I have a 4044, where did you get the wheel weights from?

[@mmrbeef]

Those are the weights from Deere. On the sales slip the part number is T19293 and they are 110 lb each. Hope that helps.

[@Yawta312]

How big of a brush hog would it handle?

[@mmrbeef]

I would say it will handle the biggest Cat 1 rotary mower you can find.... I think that is 7 ft... maybe 8ft from a manufacture I have not seen.

[@rgj5832]

I have a 6ft on my 4052M it has no issue and my tractor has a little less power than his does!

[@andrewslwn]

Who makes the linear actuator?... I am getting a 4066R soon and Deere says they don't have them... Thanks!

[@mmrbeef]

The linear actuator is from Progressive Automation. It is a custom actuator that you will have to call and order. You will also need a couple relays, a switch, and lots of wire and connectors. Getting the pigtail for the actuator from Deere is the best route when it comes to wiring. I need to do a complete video of the system rather than the parts and pieces that are out there now.

[@andrewslwn]

@@mmrbeef Awesome thank you for the information... What brand skid steer carrier did you go with?... Is there a specific one that I need or is the frontier one from Deere ok?... Also wondering if they have one that would run off of the 3rd function valve??? 🤔

[@brianr1812]

You may have mentioned this in a previous video (I'm a recent subscriber) - what is your occupation? I love your property and your collection of tractors. Thanks for making such detailed videos.

[@mmrbeef]

Thanks for the comments and subscription. I've never really talked much about my day job (for many reasons, chiefly they are not related in anyway shape or form and I work hard keep my work life at work if you know what I mean)

[@maximilianogossenperez7859]

Hola empresa de John Deere si se puede rendir para ser un mixer para tractores pequeños y para que usen los pequeños productores y se pueden yo soy un pequeño productor tengo ganadería pero necesito un mixer pequeño por favor que haga

[@davevestal7135]

Thanks for this review I'll keep my kubota

[@311hitwall]

Pay too much for that green paint.

[@mmrbeef]

Of course you pay for paint.... Depending on the brand John Deere doesn't even have the most expensive paint. A can of Deere Green is $10 and change.... While a can of Kubota orange is over $16! www.greenfarmparts.com/John-Deere-Green-Spray-Paint-TY25624-p/ty25624.htm?gclid=Cj0KCQiAjszhBRDgARIsAH8KgvcI-VYOrUPmiF1-9UCFKUP0W6dC9022DhrBhZfx1SS4uJG9Jhp7ftwaAnBrEALw_wcB parts.kubotaofomaha.com/kubota-orange-spray-paint-70000-73710/?_vsrefdom=adwords&gclid=Cj0KCQiAjszhBRDgARIsAH8KgvfqImG0zv7vUkd9AXLhXldfPTCvFulHjzXQ6u0YSOTlbX9gP0YGDckaAsivEALw_wcB

[@jaxturner7288]

Bro... that hole with the ball in it, in the tie rod is the grease reciprocal, you use a needle attachment on your gun. If it was a “outie” zerk like normal, it would get busted off. Silly guy..smh

[@mmrbeef]

Dude.... That hole is only 1/8 to 1/4 deep and putting grease in it with a needle (which I have and use for many things) is a fools errand. Plus no where in the manual (owners or technical) are there instruction on greasing the tie rods or steering cylinder. Maybe I'm not so silly... Smh

[@Second.Nature.Lawn.Michigan]

Pay no attention to Jax 😂

[@jaxturner7288]

mmrbeef how deep do you expect it to be? It just goes to the ball. Are unnecessary holes in parts that common on JD? Leave em dry I don’t care its your equipment.