THE LARGEST HYDROSTATIC TRACTORS AVAILABLE! 4066M VS 4066R!

Want to add mirrors to your tractor? Check out these options below!
One Large 7" x 12" Mirror: amzn.to/2Uit8ox
Two Large 7" x 12" Mirrors: amzn.to/2wZCQUF
One Smaller Mirror: amzn.to/2UfLPsF
Compare the John Deere 4066M vs the 4066R. These two John Deere 4 Series tractors are the largest horespower, largest frame size tractors offered by John Deere with a hydrostatic transmission! The John Deere 4066M is a value series while the John Deere 4066r is a deluxe series. There are surprisingly many similarities in capability and performance, however there's a huge gap in luxury features that could really make a difference for the operator depending on need or preference.
In this video, you'll get a good side by side comparison to help you decide which is the right Series for you. Keep in mind that there are smaller variants in each series including the John Deere 4044m, 4052m, 4044r, and 4052r. Features will be the same on those models, simply fewer horsepower. If you're looking to stay within a hydrostatic transmission and with John Deere, then you should give these two models some serious consideration. They'll tackle just about any possible job that a hobby farmer, food plotter, or homesteader could ever need.
SHOP: www.goodworkstr...
AMAZON: www.amazon.com/...
SUBSCRIBE: / goodworkstractors
LIKE: / goodworkstrac. .
FOLLOW: / goodworkstra. .
10% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttl...
5% OFF WITH CODE GWT AT HEAVY HITCH www.heavyhitch.com
5% OFF WITH CODE GWT AT BIG TOOL RACK www.bigtoolrack...
5% OFF WITH CODE GWT AT GOOD WORKS TRACTORS! www.goodworkstr...
5% OFF WITH CODE GWT AT BORA WHEEL SPACERS (COMING SOON!) www.motorsport...
*Discount codes cannot be combined with any other promotions, offers, or deals!

[@GoodWorksTractors]

One Large 7" x 12" Mirror: amzn.to/2Uit8ox Two Large 7" x 12" Mirrors: amzn.to/2wZCQUF One Smaller Mirror: amzn.to/2UfLPsF SHOP: www.goodworkstractors.com AMAZON: www.amazon.com/shop/goodworkstractors SUBSCRIBE: kzbin.info LIKE: facebook.com/goodworkstrac... FOLLOW: instagram.com/goodworkstra... 10% OFF WITH CODE GWT AT LUBE SHUTTLE! www.lube-shuttle.us 5% OFF WITH CODE GWT AT HEAVY HITCH www.heavyhitch.com 5% OFF WITH CODE GWT AT BIG TOOL RACK www.bigtoolrack.com 5% OFF WITH CODE GWT AT GOOD WORKS TRACTORS! www.goodworkstractors.com 5% OFF WITH CODE GWT AT BORA WHEEL SPACERS (COMING SOON!) www.motorsport-tech.com/bora.html *Discount codes cannot be combined with any other promotions, offers, or deals!

[@dorysbarnes758]

John Deere offers the 3rd option on the M now as a add on. Just had one put on my 4044M I purchased last week and John Deere put it on before they delivered my tractor last week.

[@GoodWorksTractors]

Good to know, thanks!

[@toml1578]

Hi, the 3rd, 4th, 5th SCV's, pinned stabilizers, and the air suspension seat are now available options for the 4M''s. I ordered all of it along with cruise control (not the nice auto style though), eThrottle, MotionMatch, and TractorPlus Bluetooth on my new 4044M.

[@doon44]

Awesome video my man! Very helpful!

[@marksjunction69]

Love your videos....thanks!!! Picking up the Heavy 72" aerator and deluxe grill accessory for my 3520 on Monday from John Deere.

[@GoodWorksTractors]

Awesome, have fun with it!

[@larrypoeschel6871]

Very thorough, great job. Thanks Larry

[@GoodWorksTractors]

Glad you enjoyed it

[@liffy8333]

Very informative video as always. Thanks!

[@GoodWorksTractors]

Thanks Liff!

[@rd1084]

Correct me if I am wrong but the M series can have an additional SCV or two added to the RoPs near the right rear signal light.

[@GoodWorksTractors]

Yes sir, that is correct

[@bennorman106]

Would be nice to see a review of the 4M heavy duty vs these as well. I believe it carries a few features from the 4R line

[@GoodWorksTractors]

I have yet to have one of those in inventory

[@BradonQuinney]

What's the heavy duty?

[@Blendstrup21]

hey good works. i follow you close, and i have a question. Im Danish, so excuse me for my bad spelling, i hope you can read and make sence of what i meen. I own a 4066r here in Denmark, and there is an 400e loader on an auction. can i fit this loader to my 4066r?? or is it only for the 4066M model? hoping for a quick respons, the auction is running out in 4 days. best regards JB.

[@IZUVER.LUBER.]

I❤JOHN DEERE😊

[@reload280]

Turnbuckle lower arms are a pain. They get muddy and then you have to remove them and clean them up in order to use them or you bust knuckles with a crescent wrench while spraying them with WD-40. I will never get another tractor with them.

[@alexanderlong9105]

How are these for running a big bush hog? I know a hydro will run hot while hogging or so people say

[@GoodWorksTractors]

Been running hydrostatic tractors with brush hogs for years. Keep the intake screen clean and you're fine.

[@BlockBustersCoNZ]

Sorry Alexander, these models are not good at all for hogging. I've had a 4066M for 5 years and it is the worst tractor I have ever owned, (and I have owned 18 JD tractors). The cooling system is completely inadequate and suffers massive blockages between the water and oil radiators, no matter how clear you keep the intake grills. On that point, in heavy mowing conditions, I had to blow the intake grills clean every 7 (seven!) minutes when ambient temperature exceeded 75 deg F. I have partially solved this by installing extra intakes in the hood and an upward exhaust stack. In the height of the season this tractor requires almost daily front end disassembly to use compressed air to clean between the radiators (a 30 minute job with practice) - and twice a season the radiator needs to be completely removed and water basted clean as so much craps blocks the fins. All this could be avoided with a better cooling system design, and better access for maintenance.

[@alexmaclean1]

So is it safe to say a M series basically replaces the E series in the smaller ones?

[@csmeyer24562]

Do you have any 4066R in stock? with Quick attach loader, and hydraulic in the back?

[@giorgospantelaios3928]

I am buying next month a 4066m and my dealer said i can get a quick release loader are you sure that m cant get quick release because if you are i have to buy the r

[@james2042]

If I'm correct you can get a 4M with a category 2 hitch on the back

[@GoodWorksTractors]

I can't say I've seen it all, but I've never seen that option.

[@james2042]

​@@GoodWorksTractors Went on their site and its the heavy duty variant of the 4052M and 4066M

[@GoodWorksTractors]

Oh, you mean the 4m Heavy Duty Series. That is different from the 4m. 👍

[@zacharybrown2289]

hi I'm looking into getting a 4000 series open station tractor I was wondering what the folded ROPS height was?

[@GoodWorksTractors]

Not positive, but I believe they fit under a 7' door.

[@michaelangelochirico206]

The only difference between a 4052M and a 4066m is the engine size?

[@GoodWorksTractors]

Correct

[@311hitwall]

$30K+ for the M and has a seat off a lawnmower.

[@GoodWorksTractors]

😂👌

[@aderajenderyoutubechannel7702]

How much rate

[@Mikeyg9096]

What’s the price difference between the two!

[@GoodWorksTractors]

Lots and lots of variables come in to play. However, around $7000-9000 in open station models.

[@fasterpastor4383]

4066m does have Loadmatch

[@johnthompson1978]

What is your location? Thanks

[@GoodWorksTractors]

Kalamazoo, Michigan. Thanks!

[@jc-botaman1077]

Hmmmm, A third function plumbed to the rear, and a cab tractor you have to add mirrors to. John Deere does some strange configurations.

[@GoodWorksTractors]

Third functions are often plumbed to the rear regardless of manufacturer. There's an internal mirror. External mirrors are optional. Better to have the option than forced to buy if you don't want. More flexibility.