JOHN DEERE Fuel shutoff Solenoid valve diagnose and repair. Cranks wont start

[@simplytinkerdad]

Link to Service and repair manual pdf for 300D, 310D, 315D and 410D is in the description

[@davestone2326]

Sir ,you are my new hero fixn stuff while babysittn ,I've been there ,I've got similar problem ,I've got no current to solenoid ,do you know where the thermistor is located ,?

[@simplytinkerdad]

Thankyou I’m sorry I don’t know where it is I do know there are several relays and fuses behind the key switch panel but how it is actually wired I am unfamiliar with

[@simplytinkerdad]

I just added a link to the Service and repair manual for backhoes 300D, 310D, 315D and 410D in the description i think it has wiring diagrams i hope this helps

[@tracyportersr]

I have a similar problem with JD 5045D after I changed the fuel filter and cleaned the tank filter. I forgot to turn the petcock at the fuel tank back on. It started and ran until the fuel in the line ran out. I turned the. petcock back on, primed the pump and it would not start. I bled the air out of the lines at the injector and still nothing. I have not bled the lines at the engine because I would have to remove the hood and I haven't had time to do that yet. Any recommendations are appreciated.

[@simplytinkerdad]

A trick that works sometimes when air locked is pinching the return line from the injector return or the return to the tank line with vice grips crank the engine awhile and if it starts to run remove the vice grips

[@tygrallure6895]

Have this problem. Fuel pump seems to be getting fuel, but up at the injectors when bleeding, it's dry. Going to try this tomorrow and see if this fixes it. Kind of stumped.

[@simplytinkerdad]

I hope it is your issue its cheaper and easier than the pump for sure

[@rajuanoop462]

My new pump is not delivering fuel to the injector. Do you have any idea?

[@simplytinkerdad]

I would make sure its bleed good up to the pump and load test that solenoid wire

[@rajuanoop462]

@simplytinkerdad I did as you said but no positive response

[@wednesdar452]

I have the opposite problem... Mine won't shut off... suspect the solenoid. Do not hear any clicking.

[@simplytinkerdad]

Ha that would be worse maybe Your probably right if you unplug it and it still runs I would say its pooped out