Testing Viral Woodworking TikToks Again...

  Рет қаралды 2,165,303

John Malecki

John Malecki

Күн бұрын

Пікірлер: 938
@jerryspeedbumps512
@jerryspeedbumps512 2 жыл бұрын
When I worked in printing, I would cut a thick bleached cardstock on a bevel in the exact shape of a utility knife blade. The stock was just about the same thickness as the real blade. Being a sturdy coated stock, it held an angle/edge well. Next was the silver ink. a full dip for overall color and then you could run your finger along the beveled edge cut to deviate the silver finish. A quick dry, and toss it in the handle of your nearest coworker. It was always a good time watching the reactions. Sometimes the "blade" worked for a minute before it failed miserably.
@ItsBugtronic
@ItsBugtronic 2 жыл бұрын
Watching John screw around with a pair of calipers when he could have just traced the arbor hole off the blade sitting on the bench next to him. 🤣😂🤣1:51
@John_Malecki
@John_Malecki 2 жыл бұрын
Wayyyyy too easy 🤣🤣🤣
@chrismanning5232
@chrismanning5232 2 жыл бұрын
The fact that there were 3 adults in the room and nobody thought of that. Sometimes your brain is just stuck in squirrely mode, baby!
@Cobyc5150
@Cobyc5150 2 жыл бұрын
I was thinking the same thing but three idiots workshop wouldn't be the same without it!
@dalegrover7633
@dalegrover7633 2 жыл бұрын
You beat me to it 🤣
@treytavares8590
@treytavares8590 2 жыл бұрын
Did he have an 8” saw blade to trace or did he just have the 10” out of the saw?
@alfies98
@alfies98 2 жыл бұрын
Watching American’s work out spacing with their weird measurements is really impressive, i have no idea how you’d figure that stuff out like that.
@trixter21992251
@trixter21992251 2 жыл бұрын
Haha yeah. "The nine three quarters plus five eights is gonna be... ten five eights." Like what did you just say.
@brianwright9514
@brianwright9514 2 жыл бұрын
Do you guys not learn how to add fractions in primary school?
@alfies98
@alfies98 2 жыл бұрын
@@brianwright9514 yeah but we don’t use fractions really. So its just gets forgotten
@trixter21992251
@trixter21992251 2 жыл бұрын
@@brianwright9514 ok, here's what I heard him say Nine three quarters (9x3/4) plus five eights (5/8) is ten five eights (10x5/8) Simplifed 54/8 + 5/8 is 50/8 Since this is incorrect (but close), I gotta conclude that he's not really doing the math in his head. He's using some quickhand system to get a rough estimate. And that just comes with experience. It's not about primary school curriculum. Since we use metric, we don't develop those quickhand systems.
@brianwright9514
@brianwright9514 2 жыл бұрын
@@alfies98 the same principals used to add fractions are used in algebra and proportions.
@Sceadusawol
@Sceadusawol 2 жыл бұрын
Watching the puzzle joinery (second project) makes me think, have you looked at wooden puzzles generally, and considered how you could put them into epic joinery projects?
@pitythegreat
@pitythegreat 2 жыл бұрын
Imagine the paper cut that thing would give you.
@oxylepy2
@oxylepy2 2 жыл бұрын
Honestly the paper blade seems awesome. Almost no kerf? Finishes ends for you? With a good printer, some decent cardstock, and a 0 clearance insert, this might be an option for small projects
@PikkaBird
@PikkaBird 2 жыл бұрын
Plus, if you cut yourself on it it'll cauterize the wound at the same time so you won't bleed out.
@1pcfred
@1pcfred 2 жыл бұрын
What keeps the disc straight is the centrifugal force. Touching it from the side would do nothing for it.
@stompingpeak2043
@stompingpeak2043 2 жыл бұрын
@@1pcfred it just adds support for when force is on the blade. Same goes for metal blades. The closer the insert the less play. You also get less tear outs with a zero clearance insert. Where you will get more blowouts on your cuts with a half or quarter inch
@1pcfred
@1pcfred 2 жыл бұрын
@@stompingpeak2043 your blade is not touching your insert. Zero clearance does not equal zero. You're not going to get tearout using paper as a cutting disc either because the action is abrasive. There's clay in paper and that's why it "cuts". I don't think you really appreciate just how much centrifugal force is going on here. There's 18 pounds spinning out. Now do you really think a sheet of paper can support 18 pounds? Or what a piece of paper can support is going to influence 18 pounds of force? Because I don't.
@stompingpeak2043
@stompingpeak2043 2 жыл бұрын
@@1pcfred no shit. Of course they dont touch. If it did touch it would literally not spin right. You are right and it basically just spins like a drill. The insert helps remove play. Is there play on paper? No shit.
@mike41062
@mike41062 2 жыл бұрын
I've actually used cardboard cut into discs for my angle grinder- and used a glue stick to attach sandpaper. Actually works pretty good. Really isn't dangerous if you aren't being incredibly stupid with it. Cheap hacks work sometimes! I think the fact that the paper you used was so "glossy" that it seared as it cut through. I'd be interested in seeing a fine sandpaper attached to both sides of that- you'd probably get a more normal looking cut. No reason to waste materials though.. I've actually seen someone glue fine sandpaper to their REAL circular saw blade on a table saw, cuts came out REALLY nice and the sandpaper stayed attached!
@randycosgrove3608
@randycosgrove3608 Жыл бұрын
I saw John Heisz do that a few years ago. Also the paper blade.
@TheBurlyIrishman1
@TheBurlyIrishman1 Жыл бұрын
On
@kevinmiller1881
@kevinmiller1881 2 жыл бұрын
Random person: "What do you do for a living?" John: "I make $10,000 tables and trying tiktok viral videos." 😂
@John_Malecki
@John_Malecki 2 жыл бұрын
"and i make videos about it so other people can share in my struggles and fun"
@maeve615
@maeve615 2 жыл бұрын
For the first one, it reminds me of a parlour trick I'd do to entertain kids when I worked at a grocery store. I'd take a box I just stocked, tell the kid "Do you want to see a magic trick?" then draw a hand saw on the box, slice it out with my cutter, & use it to saw another box in half
@billcornett2256
@billcornett2256 2 жыл бұрын
John Heisz did the paper blade on YT. I think over 12M views
@HollowRoll
@HollowRoll 2 жыл бұрын
Probably where the tiktok got the idea from
@mikeycage1587
@mikeycage1587 8 ай бұрын
The 2nd part that does the wood working is similar to the Japanese style of building structures. Its really cool.
@HydraMods
@HydraMods 2 жыл бұрын
I love how sharp bladed steel spinning at thousands of RPM is apparently okay, but when it's paper John gets nervous haha. This is a great series!
@StoneyMeyerhoeffer
@StoneyMeyerhoeffer 2 жыл бұрын
4:21 This is a classic example of paper saw kickback. You were super lucky sir. Watch those feed rates. I find laminating 3 sheets of construction paper together (yellow-black-yellow gives best performance) is the best trade off between kerf, wear, and reasonable feed rates. Reinforcing the center with 2" fiber washers contact cemented to either side also increases rigidity and allows for even faster feed rates. Laser cut micro-perforations (width of laser, 0.25mm in length) every 2.87 degrees on the outer edge of a 10 inch blade has yielded great long term performance and allows the blade to wear to a predictable depth before "re-sharpening." Laser perforation cut interval should be adjusted during "re-sharpening" due to loss of blade diameter accordingly. Although you can get by with 3 degrees anywhere from 10" down to about 9.25" I usually just throw my blades away at that point and make a new one.
@fgbhrl4907
@fgbhrl4907 2 жыл бұрын
Careful -- those are Dewalt colors. They might come after you like they did Rockwell.
@StoneyMeyerhoeffer
@StoneyMeyerhoeffer 2 жыл бұрын
@@fgbhrl4907 I think I might be ok. You don't really much see the inner layer. I also use pink fiber washers with my logo lasered on. I could fall back to using Brown or Forrest Green. They had similar performance but the longevity isn't there. Has to be something to do with the pigment.
@1pcfred
@1pcfred 2 жыл бұрын
I'd like to see what charging the paper up with some polishing compound would do. Give 'er some grit.
@StoneyMeyerhoeffer
@StoneyMeyerhoeffer 2 жыл бұрын
@@1pcfred I'm dubious of how well the paper will hold compound, but I'm going to try this. I'll report back with results.
@1pcfred
@1pcfred 2 жыл бұрын
@@StoneyMeyerhoeffer I polish plastic with compound charged paper so it should work pretty good. I get optical clear results.
@redsnowleopard
@redsnowleopard Жыл бұрын
Behold Perry the Platypus! My Papercutinator!
@TheRealAnarchrox
@TheRealAnarchrox 2 жыл бұрын
For the first thing you're attempting, a compass is what you're after for drawing circles at a particular diameter. A protractor is for measuring angles.
@TheRealAnarchrox
@TheRealAnarchrox 2 жыл бұрын
I believe they are the most commonly mixed up names because so many people get it mixed up. I believe it's because for school and stuff, we always got them both together as a requirement for maths or shop class.
@pamelah6431
@pamelah6431 5 ай бұрын
Or just trace the blade next to him.
@Erik_The_Viking
@Erik_The_Viking 2 жыл бұрын
That 3-piece joint reminds me of some puzzles I've played with. Those would be cool for a small table with some work though. Great job!
@bikerguykrash1182
@bikerguykrash1182 2 жыл бұрын
A protractor is like a ruler that you can draw angles up to 180°. You want a compass that draws circles.
@cpl_0503
@cpl_0503 2 жыл бұрын
I can't lie... I laughed SO hard. That circular saw blade from paper is ABSOLUTELY something I would have tried in Junior High School, called it a science experiment, and got my a** beat by my dad. I loved it!
@davedixon2167
@davedixon2167 Жыл бұрын
I can't remember if I was in junior high at the time, but I remember doing makeshift "saw blades" with Erector set girders and plates, and a 3V DC motor that I hooked up to a 9V battery. Really, just anything I could spin up and do damage with would have probably been alright, lol. Somehow I never cut myself, even when I made a little lever to launch the blade off the driveshaft for it to go haphazardly careening across the room.
@SlavaPunta
@SlavaPunta Жыл бұрын
Worked in a precision metal shop for years. We'd side cut metal (wires, rods, tubes, shims) with dremel paper sanding disks. Then cleanup / shape the cut with actual sanding surface. All in one smooth 3 second move. Works so well that I didn't realize for a long time how ridiculous it was we were cutting metal with essentially paper.
@The_Ol_Bizzaroo
@The_Ol_Bizzaroo 2 жыл бұрын
Serious question here...I'm relatively new to router tables. Shouldn't the dovetail cut have been run left to right going behind the bit? Or preferably right to left using the front side of the bit? Why did he choose to go behind the bit?
@therealselfdefence
@therealselfdefence 2 жыл бұрын
Right to left is fine, but almost certainly not between the fence and the bit. Work piece, bit, fence. Cool video though.
@woodisgoodbuilds
@woodisgoodbuilds Жыл бұрын
Definitely should have cut it on the front of the bit. That way there's no spinning bit exposed to run your fingers into, and you'll experience a smoother cut. The way it was done in the video is called "climb cutting" , where at the point of contact, the blade is spinning in the direction of travel. I definitely don't recommend that as it's best left to a CNCs!
@scopace314
@scopace314 11 ай бұрын
You're absolutely right my man, good instincts. Right to left using the front side of the cutter, with pushers between hands and the spinning bit, would be the safe way to do this.
@HebuTheLoneWolf
@HebuTheLoneWolf Ай бұрын
12:17 would be nice night stand if u placed a round glass top on it. or even better, a night light where the light is Opaque orb
@AlexTaradov
@AlexTaradov 2 жыл бұрын
I saw that paper cutting plastic trick with a drill and a small disk of paper more than 20 years ago. Another neat trick is a simple thread that you can pull from both ends. It cuts plastic well and sometimes comes in handy if no other tool can reach the spot.
@CountDoucheula
@CountDoucheula 5 ай бұрын
The bootlace ziptie saw is an old-school SERE tactic
@SakuraShirakawa
@SakuraShirakawa 2 жыл бұрын
To be fair, MOST videos I have seen treat the paper sawblade as what it is, a neat little science thing. Anyone who promotes it as an actual woodworking tool is nuts.
@joeblow8766
@joeblow8766 2 жыл бұрын
lol--buys a super expensive router table set up and cuts on the wrong side of the dovetail bit. Genius. How many times did those boards go shooting across the room?
@MR_FRENCH_TOAST
@MR_FRENCH_TOAST Жыл бұрын
This takes getting paper cut to a whole new level
@ChrisBrett2
@ChrisBrett2 2 жыл бұрын
I found this chancel from the first Woodworking TikToks and I just loved your channel ever since. Thanks for making the Woodworking part of my brain light up!
@Celticshade
@Celticshade Жыл бұрын
Fun fact. I have seen that as a table base quite a few times. It always makes for an interesting looking table. You should make one, it would be a fun little project!
@MCsCreations
@MCsCreations 2 жыл бұрын
The stool is a pretty nice project, John! I liked it! 😃 Stay safe there with your family! 🖖😊
@Plantventions
@Plantventions 8 ай бұрын
Amazing! The paper table saw blade was awesome! The finish reminds me of that of a laser cutter
@Scientific_one
@Scientific_one 2 жыл бұрын
Thanks recommended videos I had no idea Bert kreischer was into wood working
@court2379
@court2379 2 жыл бұрын
Paper often has clay mixed in to make it smoother that may serve as an abrasive.
@John_Malecki
@John_Malecki 2 жыл бұрын
Ohhhhhh
@PikkaBird
@PikkaBird 2 жыл бұрын
This is why a brown paper bag with no print or wax coating on it is excellent for buffing up certain oil finishes.
@court2379
@court2379 2 жыл бұрын
@@PikkaBird I wouldn't think brown paper has any clay though. The clay is used to whiten and make the paper smooth. Things desired in office paper. In cardboard it is used as a filler, and I guess probably to smooth as well, as that is the type used for food packages and gets printed on. I doubt much is used in corrugated card board as it would increase the shipping weight unnecessarily, without increasing strength.
@NithinJune
@NithinJune Жыл бұрын
7:28 This was a project i did as a high school freshman in my engineering-manufacturing class!! (we cad-ed it and then used bandsaw and jigsawed it)
@Jenuin
@Jenuin 2 жыл бұрын
1:30 taking paper 📄 cuts to the next level 😱🤞🏼
@MrNside
@MrNside Жыл бұрын
Bought flatstack (not pre-assembled) kitchen cabinets that came dovetailed like that last project. Out of all of the flatstack cabinets I've built and installed, they were by far the most solid. After putting glue in the dovetail (they said it was optional) I would say they were stronger that most if not all preassembled cabinets I've dealt with. They were all plywood boxes with hardwood face frames too, no particle board.
@jordanjackman4236
@jordanjackman4236 2 жыл бұрын
That puzzle joinery matches the COG puzzle from Steve Ramsey, he has a tutorial on his channel for it.
@John_Malecki
@John_Malecki 2 жыл бұрын
Oh super cool. I’ve never seen it
@leepierce1329
@leepierce1329 2 жыл бұрын
John Heisz did the paper blade a couple years ago. While it did cut, he did have to slow way down on thicker materials.
@seancampbell2456
@seancampbell2456 2 жыл бұрын
John's looking good. Looks like the morning walks are paying off
@shrimplomein6509
@shrimplomein6509 Жыл бұрын
Honestly I could see a miniaturized version being incredibly popular for crafts, considering that one could definitely get the right kind of paper/cardboard (NOT corrugated fiber board you heathens) that could cut at least 25-30 pieces of foam before encountering problems and without using an insert. Adding in additional helpers for stability would only improve the durability of the already dirt cheap "blades".
@kalimbobo
@kalimbobo 2 жыл бұрын
Subbed. As a beginner the allure of the viral woodwork Tiktok is irresistible. Really needs an experienced voice of reason to sort the BS from the real and the squirrel rating is awesome 🐿️🐿️🐿️
@John_Malecki
@John_Malecki 2 жыл бұрын
hahah thank you Devante
@uribove
@uribove 2 жыл бұрын
Easy explanation, paper, cardboard and wood are all cellulose. And thus have close to the same hardness value, which means paper can scratch or indent wood, especially at such rapid speeds
@tomrudd530
@tomrudd530 2 жыл бұрын
its a COG puzzle, the cut outs literally spell cog
@EvanDunville
@EvanDunville 2 жыл бұрын
Cool set of suff I like the interlocking walnut piece the best
@sandynix5268
@sandynix5268 2 жыл бұрын
That‘s a puzzle and pretty old.
@stirlingwoodcraft
@stirlingwoodcraft 2 жыл бұрын
very entertaining video john, I certainly wouldn't run that paper blade in my sawstop either😂
@Phantomthecat
@Phantomthecat Жыл бұрын
7:35 - We built those puzzles in year 10 woodworking at High School back in the mid 80’s - I’ve still got it! 😊👍
@ElliotL
@ElliotL 2 жыл бұрын
Man listening to Americans trying to add up fractions of inches just makes me so happy I’m not American haha. Let’s just be honest the metric system is just better.
@Acudit
@Acudit Ай бұрын
Yeah. Most all Americans agree. We don't use it by choice.
@tosteson1
@tosteson1 2 жыл бұрын
As a dad with little kids, that little stool with rounded weeks would make a perfect handwashing stool for the bathroom
@animationcreations42
@animationcreations42 2 жыл бұрын
You should have installed a paper riving knife to stop all those safety comments you'll get for removing it!
@cggentry
@cggentry Жыл бұрын
I genuinely like this guy. I also like that he didn't edit out the multiple instances of router jump. His tools are better than mine, so I guess that's why the finished piece of wood doesn't have the gouge from jumping.
@Not_TVs_Frank
@Not_TVs_Frank 2 жыл бұрын
Steve Ramsey did that puzzle design once, called it a C-O-G puzzle because that roughly describes the shape of the hole in each piece. I think that might be the first thing I ever cut on my bandsaw.
@AzraelThanatos
@AzraelThanatos 2 жыл бұрын
I think it's also the basic design for a low budget czech hedgehog tank trap...
@kimholloway1169
@kimholloway1169 2 жыл бұрын
John you look GREAT!! All your hard work is really paying off!
@alliebonesVODs
@alliebonesVODs 2 жыл бұрын
Okay so I've never done like any woodworking ever in my life, so I'm curious: what makes using the table saw dangerous for the triangle cuts?
@clay_d
@clay_d 2 жыл бұрын
They're not using the fence on the saw (which is like a guide) to keep the wood straight. This means the wood could turn while cutting and bind up in the blade, making the piece shoot out at you. I have personally done that and it is very sketchy. I hope this answers your question.
@joshuatolodxi179
@joshuatolodxi179 2 жыл бұрын
The blade spins towards you instead of away from you, and there's so much power in the blade, it will "bite" or "grab" if there's any twisting or shifting of the workpiece, which causes the piece to "kickback" oftentimes causing an injury, but also known to be fatal in some cases
@alliebonesVODs
@alliebonesVODs 2 жыл бұрын
@@clay_d Yeah, that makes sense to me - thanks!
@Vickie-Bligh
@Vickie-Bligh 2 жыл бұрын
I know you guys kid around in the shop but it's obvious you all take safety seriously. And I appreciate you pointing out the dangerous things the Tik Tokkers were doing. Have to say I was astounded by the paper saw blade. WTF? This was a fun one, John.
@1pcfred
@1pcfred 2 жыл бұрын
Paper isn't just cellulose. There's clay content in it. Clay is an abrasive. A table saw spins at a very fast speed too. That particular model has a spindle speed of 4,800 RPM. An 8" disc on it is moving at 114 MPH. At that speed it's going to give anything that touches it quite the road rash.
@nickweddle677
@nickweddle677 2 жыл бұрын
Why in the world did you spend so much time trying to scratch out a circle on the paper instead of just tracing the blade. Lmao. Live and learn I guess
@John_Malecki
@John_Malecki 2 жыл бұрын
Because that’s too obvious
@ryanmcewen415
@ryanmcewen415 2 жыл бұрын
I've used alternating sheets of paper and cheap canvas discs in an angle grinder to clean metal. Works pretty good and is one of those things you can make cheap if you have a circle die to cut the fabric and paper easy
@neilf4128
@neilf4128 2 жыл бұрын
John Hiez or whatever his name is, did use paper as a table saw blad to successfully cut a block of wood.
@muneer24
@muneer24 2 жыл бұрын
I think he was the first to do it too right?!
@erict3728
@erict3728 2 жыл бұрын
Did he make a nice clean cut, or was it mostly a burn like this one?
@neilf4128
@neilf4128 2 жыл бұрын
@@erict3728 He sure did.
@EdHadder
@EdHadder 8 ай бұрын
I Totally Love These Videos John 💓
@futureonjk
@futureonjk 2 жыл бұрын
Make something out of laminated printer paper.
@jamescoyne4559
@jamescoyne4559 2 жыл бұрын
If I remember rightly the reason paper cuts things easily is because on a very small scale it’s actually a really serrated edge, which is why papercuts happen and why they hurt so much
@Gabe731
@Gabe731 2 жыл бұрын
John have you been losing weight?
@John_Malecki
@John_Malecki 2 жыл бұрын
Yep, I mention it in the video haha
@Gabe731
@Gabe731 2 жыл бұрын
I'm still watching. LoL. Up to the stool at router table.
@DuricCustomWoodwork
@DuricCustomWoodwork 2 жыл бұрын
Keep these coming! Its cool
@joelw6215
@joelw6215 2 жыл бұрын
That guy that does all those dangerous A$$ cuts is all over the place. When someone else does the videos , you’ll know … he got bit by the SQUIRREL
@006alecos
@006alecos 2 жыл бұрын
Your tool wall is beyond visually satisfying 😂
@barryirby8609
@barryirby8609 2 жыл бұрын
Fabulous!!! A suggestion....next time bury about two thirds of the dovetail bit in the fence so your work is not "trapped" between the fence and bit. Much safer. As spastic as I am I could never make your way work.
@markroper9269
@markroper9269 2 жыл бұрын
The cohesion of your team is palpable!! 😋 Nice video!
@Farm_fab
@Farm_fab 2 жыл бұрын
John, I finally got a throat plate for my commercial saw. I bout the saw at the scrap yard, had the motor rebuilt. It is now complete, so I can use it. For my shop I bought a parts Ryobi table saw to repair my my "good" saw. I cut all kinds of stuff on this one including firewood, so it doesn't have to be pretty, just functional.
@garywitkowski69
@garywitkowski69 2 жыл бұрын
That coach Hines part absolutely killed me 😂😂😂😂
@donbeebe2110
@donbeebe2110 2 жыл бұрын
Talk about the ultimate paper cut
@Nilboggen
@Nilboggen 2 жыл бұрын
The poster board cutting/burning through walnut really surprised me. I like the way after it cut through a pencil you just went straight to hard wood. Next video idea I want to see if it can cut through sheet metal LOL
@jannejohansson3383
@jannejohansson3383 2 жыл бұрын
Sandpaper would cut steel, if you install it same way he did..
@KarlKKC
@KarlKKC 2 жыл бұрын
Brill these Ticky Tockys cant wait for PT3 😃
@SchysCraftCo.
@SchysCraftCo. 2 жыл бұрын
Wowers that's freaking awesome. Can't wait for more. Keep up the great craftsmanship and hard work my friends. Fab On. Weld on. Keep Making. Stay squirrely. God bless.
@Atlantismonkey40
@Atlantismonkey40 2 жыл бұрын
Hi John. I just watched your industrial table build from 6 years ago! My God, has it been that long? I look at your shop, and stuff at present. It blows my mind away. How far you have come. Your wife-child etc. Take a moment if you can. I have recently reflected on the last 5 years of my life. Ours is very much the same, yet different. I have acquired more in five years, than the last twenty. That is not meant to be bragging, just a statement of a lot of work. Well done. Looking forward to seeing what is next for the both of us.
@jonatanmaecki3534
@jonatanmaecki3534 2 жыл бұрын
Cheers from Poland!
@jsmith5443
@jsmith5443 2 жыл бұрын
That first one was the coolest. It's nice to know it's possible and cheap.
@pawegulina6932
@pawegulina6932 9 ай бұрын
12:23 idealny trójnóg do stolika kawowego. Zrób większy i dodaj blat.🎉 12:23 the perfect tripod for a coffee table. Make it bigger and add a countertop.🎉
@JohnRoberts71
@JohnRoberts71 2 жыл бұрын
Great content thanks for sharing
@jackriley7943
@jackriley7943 2 жыл бұрын
I love this series that you're doing!
@jacksmiththeboss
@jacksmiththeboss Жыл бұрын
Love the Ron Swanson picture on your wall.
@gates531
@gates531 2 жыл бұрын
Man.. you're the Leon lush of woodworking 😊
@michaelross8794
@michaelross8794 2 жыл бұрын
1) Someone little, your son, Jordan...HA! Poor Jordan. 2) Tasting to determine wood type...priceless!
@thumpbackwhale9528
@thumpbackwhale9528 2 жыл бұрын
Taking paper cut to a whole new level
@mootdamon
@mootdamon Жыл бұрын
Working with imperial measurements sounds like a nightmare
@TarotLadyLissa
@TarotLadyLissa 2 жыл бұрын
I’d love that puzzle type piece as a base for a cool stool!
@NextGenGaming13
@NextGenGaming13 5 ай бұрын
Bro learnt to run before he could walk..... Makes crazy shit out of wood but cant draw a circle on paper. 👍🤣
@isobelstevenson3826
@isobelstevenson3826 3 ай бұрын
You should make a table using the interlocking legs, but use your three favourite woods to make it 😁🤘
@Jakob6920
@Jakob6920 2 жыл бұрын
I love the painting of Ron Swanson in the background.
@jonathan__g
@jonathan__g 2 жыл бұрын
That second one would make for some epic table legs that I would love to see in a video.
@tiesflies
@tiesflies 2 жыл бұрын
Hey brother. You’re so talented. Thanks for the video!!
@lizzo001
@lizzo001 2 жыл бұрын
We made the puzzle (second video) in trade school back in 2011, only just found it again the other day sorting out some cupboards.
@cswatson4823
@cswatson4823 2 жыл бұрын
You have found a new way to cut steaks on the table saw. Paper sliced thin for sandwiches
@MrGrant440
@MrGrant440 2 жыл бұрын
Your face when cutting the pencil was FANTASTIC
@BudjetBassin
@BudjetBassin 2 жыл бұрын
Always love these videos🤣
@STV-H4H
@STV-H4H 8 ай бұрын
Instead of trying to make calipers to make your circle try tracing the 10” blade, this will center your arbor circle and the outer circumference just do a rough round edge. When I wrote this I hadn’t yet read the comments, thankfully someone pointed this out long ago
@CoreyD76
@CoreyD76 2 жыл бұрын
Claims it's unsafe to free-hand on the table saw then proceeds to send material between the bit and fence on the router table. Seems legit. LOL
@DeborahCostello-x7y
@DeborahCostello-x7y Жыл бұрын
I’d LOVE to see you build the fish tank table!
@jacobmuzik5461
@jacobmuzik5461 2 жыл бұрын
The paper saw blade would probably be the worst paper cut ever
@jaconaude
@jaconaude Жыл бұрын
That paper blade is nuts 😁
@angelgippson
@angelgippson 2 жыл бұрын
i believe Steve Ramsey made a totorial for the puzzle you just did a few years ago, but the paper disk blew my mind.
@schloemermichael
@schloemermichael 2 жыл бұрын
I was getting frustrated watching my guy try to measure and math out a paper saw blade, meanwhile I'm thinking to myself "you already removed the actual blade, just trace it on to the paper!" 😂
@seattlematt
@seattlematt 2 жыл бұрын
Dude! The weight loss is really showing. Congrats and keep it up. And of course, cool video. Thanks for the content.
@techexamined
@techexamined 2 жыл бұрын
Another epic one!!!! Loved it!!! Let’s see some more!!!
I Tested Viral Woodworking TikToks
14:55
John Malecki
Рет қаралды 1,1 МЛН
I Tested The Most Viral TikTok Tools!
11:34
John Malecki
Рет қаралды 1,2 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 53 МЛН
How many people are in the changing room? #devil #lilith #funny #shorts
00:39
One day.. 🙌
00:33
Celine Dept
Рет қаралды 75 МЛН
Why no RONALDO?! 🤔⚽️
00:28
Celine Dept
Рет қаралды 114 МЛН
I Tested Viral DIY Home TikToks
31:45
John Malecki
Рет қаралды 816 М.
Can I Make An Epoxy Chisel Cut Wood ?
17:48
John Malecki
Рет қаралды 463 М.
I Tested More Viral Woodworking TikToks!
13:03
John Malecki
Рет қаралды 883 М.
I Bought SCAM TikTok Tools
39:37
John Malecki Unscrewed
Рет қаралды 1 МЛН
The Worst Wood To Build With
28:47
Blacktail Studio
Рет қаралды 9 МЛН
Turn Your SCRAP WOOD Into Gifts or CASH
23:30
Start Making (Woodworking)
Рет қаралды 133 М.
I Tested Dumb Viral DIY TIkToks
28:50
John Malecki
Рет қаралды 1,9 МЛН
21 Wood Joinery with Tool Hacks | Japanese Woodworking
27:34
YASUHIRO TV
Рет қаралды 198 М.
Testing More Viral Woodworking TikTok Techniques
23:31
John Malecki
Рет қаралды 1,5 МЛН
I Tested Viral Tiktok Beer & Chip Holder 🍺
25:14
John Malecki
Рет қаралды 650 М.
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 53 МЛН