I Bought 1 Star Amazon Tools Again

[@BlackstarStudio787]

Good morning. Hope everyone is enjoying their morning shit

[@spencerpearson1321]

Am currently working on that.

[@farmdog93]

In the same boat lol the ss shitty express

[@bradtoops5108]

Trying to haha

[@berryg4309]

Not yet 🎉

[@RoomerJ]

Had a wine cork type this morning.

[@jameswarner5878]

The fact that John says the nailer is heavy and switched arms so quickly while being twice as strong as a normal man is concerning.

[@devilmikey00]

Probably more about the wrist than anything at that angle. God help anyone who has carpel tunnel using that thing.

[@anthonystark5729]

I can't help but think that spraying water on an electrical extension sockets is a good way to trip a breaker, and possibly meet your maker...

[@Krulliee]

Dear John, those numbers 1 to 20 you mentioned at 14:00 are no speed settings, but clutch settings for driving in screws. The speed setting is the switch on top of the drill!

[@R__A]

When you forget it’s set to 20 and almost break ya damn wrist😂

[@jameshill4900]

Actually surprised when he said that. All of his makitas he uses have similar clutch settings.

[@makermornings3340]

He did the same with the axis jigsaw... went to speed setting 2 lol which wasnt speed at all.

[@flandrble]

@@jameshill4900 i think he's an impact driver guy not a drill driver guy

[@nathangroves3177]

Even my 15 year old son knows it's a torque setting and he doesn't know the difference between a screw and a bolt!!

[@summitlt]

I have that Milwaukee impact, came from home Depot 8 years ago. It still in great shape because it's basically useless compared to anything made after it. Came in a kit with the old big 3.0 batteries. I keep it In the house for hanging pictures, the biggest task it's good for .

[@tsmspace]

the red ryobi

[@devilmikey00]

If that's the case it's probably one of those situations where someone bought a pallet of old returns or new old stock that never even made it to retail before it got replaced by a newer better tool.

[@tsmspace]

@@devilmikey00 you can still buy that one new all over the place. It has the clip attached and everything. It comes in a kit with two 1.5 batts and a drill at home depot. It's brushed, not that powerful, and bigger than the rest, and is like the old ryobi basically, maybe a bit better. They must have made a lot of them, and just still have stock.

[@tsmspace]

@@devilmikey00 152 in stock in honolulu home depot! Model # 2691-22 kit with drill two batts, charger

[@diftoyota]

I have that one too, two of them From home depot

[@Pgroenbech]

In fairness to the concrete saw, the amazon page says you need a 32 amp breaker. "Note: It is recommended to perform cutting operations at 32A current. (When the current is 15A, the single cutting depth should not exceed 50mm (2""). If a cut of greater than 50 mm (2"") is required make several passes)" 3.2kW at 110v, obviously requires more than 20A.

[@timothybayliss6680]

That's kind of weird. You need a tt30 or l5-30 for that. The cord on it isnt 10awg either

[@FreelancerFreak]

That's a massive breaker. Only specialty industrial places would have a breaker that large.

[@schwuzi]

​@@timothybayliss6680It's probably meant for 230V countries. The standard outlet in Europe is 230V/16A, so it should easily handle that thing.

[@Pgroenbech]

​@@FreelancerFreak maybe ? In the EU 32/50/63 Amp 3 phase isn't that uncommon. 3.2 kW is a single phase 16A fuse here, if it isn't continuous load, which i assume the saw is not rated for, anyway. Electric car chargers are sometimes 32A, add a bit of spare load for the house, and you need a 50A breaker.

[@Pgroenbech]

​@@timothybayliss6680 I mean, the saw is probably not great quality, and respect for american power standards probably wasn't at the top of the spec sheet. A guy on the french amazon page seems to have measured some kind of current on the saw to 40A (presumably at 230v)

[@memberwhen22]

i don't think the world will ever truly be ready to see Sam in a full size truck

[@IAteFire]

He would be too powerful

[@nunya3163]

Hopefully Lee Zeldon adjusts the CAFE standards at the EPA, allowing companies to start building the small truck like the Ranger once again.

[@barix9495]

I love the one star reviewers who buy the cheapest item on the market and are like "WHY ISN'T THIS AS GOOD AS A PROFESSIONAL TOOL!!!?!!???!!!" - Brotherman it's 20% the cost of course it's not as good! Love these tests John!

[@devilmikey00]

It should still work though and not break after a couple of minutes of use which some of the stuff here literally does not function for the purpose it was created. You are literally being sold hunks of plastic and metal shaped as a tool.

[@hochhaul]

"This jigger is terrible! I wasted $65 on this thing and it's nowhere near as good as the $450 Bosch jigger! JUNK!"

[@MrJoshpit]

You trusted the welding mask it came with 😮

[@brothyr]

Maybe don't have the extension cord outlet right behind the saw that sprays water behind it?

[@harleyrobertson6746]

Bought a Milwaukee impact (brand spankin new) not from Amazon but from big red power tools internet store (they're a licensed official Milwaukee online retailer) and it came with the hook attached

[@gutsngorrrr]

The concrete saw will need a 32A breaker and would therefore be better run using a large generator. These large blade saws take a lot of power, that's why you generally see petrol driven ones used in construction.

[@DVGSIBLNTHE]

Like why don't they see how much it uses. I don't want to sound rude but my guy in the vid is not the smartest one I have ever seen. But his reviews are good. He heard them saying the reviews it trips a 20 amp and why put it on a 20 amp and spray water all over the plug lol. But it is a very good vid.

[@mr.twister4345]

just another bit of info that they should put on their product info page.

[@trucknr]

There's no such thing as a 32a breaker. You cant just upsize the circuit either cause the 20a plug it comes with is rated for 20 amps only. A 20 amp circuit on a generator will also trip if the current exceeds 29 amps. This guy is not very sharp, but very entertaining to watch.

[@DukeICT]

I bought the same welder off Temu for $35. I haven’t used it yet but now I’m psyched to break it out. Thanks John!!

[@lotharbeck71]

I work for Milwaukee Tool. We do NOT sell through Amazon. Either that’s straight up counterfeit, or it’s from someone selling off from return pallets.

[@jaywelker5566]

it's definitely not counterfeit and you don't need to work for Milwaukee to know. If they're going to fake tools they're not faking the lowest end brushed model 2656. They're going to go after Fuel branded stuff

[@MtnDewWarrior]

The problem with Amazon is your not getting everything from Amazon. There are thousands of independent sellers that you buy from on the Amazon site and Amazon ships out those people product

[@JohnSmith-b6n]

Even if you get something from Amazon, you often get crap that was returned and broken or not the product at and Amazon sends it out without checking

[@MtnDewWarrior]

@JohnSmith-b6n I have ordered hundreds of things from Amazon, only had an issue one time where I got a box for my sunglasses with nothing in it, and Amazon sent me a new pair. They are delivering millions of packages, most of the time like 2 days after ordering. Shits bound to slip through the cracks. However, that's not what most this stuff in this video is. The problem with these is that people buy the cheapest tools in the world, then complain when they are cheap shit

[@robertwittjr1198]

LOL 35:00 water discharge at power cable on ground MIGHT trip the breaker, perhaps? had to edit this - forgot to say another great vid sir. BOHICA tool reviews are the best.

[@jamesbyrd3740]

no it was drawing too much power.

[@mickismoot]

As a welder 24.10 time stamp the reason the rod doesnt strike again because 7018 leaves a little bit at the end of the rod after it has been struck so it cannot be used again unilt it has been like hit

[@OdiumTV]

You should *definately* do fake/knock-off tool reviews/battles👀

[@maxcorey8144]

drill concrete with water whenever possible. It clears the chips and cools the cutting tip. A spray bottle will do use plenty of water.

[@lukegeary8366]

7018 breakdown: 3/32 is the diameter 70: 70,000 psi tensile strength 1: it can weld all positions 8: is flux composition

[@cavery43]

Hey John you’ve put a lot of effort in comprehensively reviewing crappy tools, would you ever do a video reviewing in depth some of your favorite tools? Same format, pros and cons, performance test, best uses, value for the $$; let’s hear about some tools we do want to buy lol!

[@KyleZiber]

10:21 "Desctription" 😂

[@JustinEllison1]

John, ever consider testing an assortment of the highest rated tools? Just to see the other end of the spectrum and again verify the reviews. Would like to see these tests!!!

[@Lord_zeel]

Usually Milwaukee tools on Amazon are just tools that someone bought as part of a package or promo at another store. The lack of a red box is often just because it came with other tools and they sold them all individually.

[@mromutt]

My first router was the router attachment for the craftsman bolton/B&D matrix. I loved those tools, think the mini skill saw was my most used attachment.

[@mikeljenks]

I bought one of those little welding “guns” it works but the power switch messed up and its on as soon as its plugged in. I used it to fix a lawnmower deck and so far it’s held together.

[@andrewmartino6144]

John, That Milwaukee is a real brushed Milwaukee drill! The reason it didn't come in a box and was cheap is because it typically comes with bundles, chargers and batteries. The person selling these are probably selling the tools from bundles. My last job supplied these and they were good for basic things but when you are building electrical panels for automation machines, the Milwaukee drill gets extremely hot when you're drilling like 300 pilot holes. I bet that is 100% legit.

[@88gtman]

I have one of those Sears Craftmas Bolt On Systems and as a home DIYer I love it. Don’t get me wrong it is no Milwaukee, but is all you need for most small jobs.

[@Dan-Athema]

For grinding discs that are thicker you usually have to spin the collet around so it holds the disc better 👍

[@tonyflick5542]

Haha!! My vevor concrete saw, helped me get through, 4 basement remodels! I love it!

[@melgross]

You often have to tap the end of a 7018 rod to knock off the flux at the tip or it won’t start. Companies usually sell grinders with a lock on switch, or no lock on switch. I never buy one with a lock on. If it jerks out of your hands, it will stay on at anywhere from 7,000 to 11,000 rpm while bouncing around possibly causing people or material damage. You would have to get to the cord and pull it. Otherwise it’s too dangerous to be in the room with. If there’s a manual with the Vevor machine, I would advise reading it. One reason heavy battery tools are becoming so popular is because big batteries can deliver more power than a wall outlet, unless it’s 240 volts. As others here mentioned, a 20 amp circuit isn’t enough for this. And why would you put the GFI and connectors in the line of fire to be hit by the water spray? I read reviews on Amazon from people who have no idea what they’re doing. They buy the wrong tool for the job and don’t bother reading what the page for the tool says.

[@clayrhodes9756]

So since Milwaukee is having their Black Friday deals I have been snagging up tools when I can and have done so much research I might as well be employed by them at this point. 2 statments you made at the beginning there: 1. My 4-in-1 came straight from Home Depot and the Milwaukee sales rep was on sight so I doubt it's a scam tool. It had the belt clip already attached. I think you should clarify that they don't come on FULL SIZED tools but the M12s that have special clips do. And it could have been a return and the store is not going to take the clip off before putting it back on the shelf (unused tools will get put back on the shelf, I've watched). The key is that the Milwaukee tools have an annodized layer that gives them a bronze tinted finish. If it doesn't have that specific feature, that tool will not accept the Milwaukee belt clips tgey sell and is fake. 2. Milwaukee still sells brushed motors. A good example right now is the oscillating tools. In M12, the one currently on sale 2426-20 is a brushed motor, sorry to tell you. Milwaukee is all about the sale too so they are not discounting brushless motors that much, that's what Ryobi is for. Even the one you get when you buy the M18 battery or drill kit, 2626-20, is also the brushed motor. The brushless is about $70 more expensive as well as the 2526-20 and is full price on their website, look it up. Only thing you get is a free 2.5ah battery but still same price. Moral of the story though is the same, check your tools before buying.

[@jonathanfletcher8184]

This dude welding on a 20 thousand dollar table that I know from experience is amazing really hurts my heart

[@1pcfred]

John is an epicurean of tables. An aficionado even.

[@ChairMan71196]

On a grinder, you know you don’t need the tool to take the discs on or off. all you have to do is get it to where the grinder nut is touching,Grab the blade and snug it up. It’ll tighten up on its own if you do it that way you should be able to loosen it without the tool. I did it that way for 15+years and had zero errors/blade flying lol

[@bubby-un34benny-un46]

The king👑 of youtube is back and made a another good video

[@BigBZ41]

I have the same exact Milwaukee Impact and I got mine in a bundle from Home Depot. It definitely does come with the clip on and is my worst Milwaukee tool

[@NemesisRTCW]

7018's tend to burn into the coating,,and usually work better with higher OCV welders (higher voltage output for a given current) Try it again with a 6013. That should solve the restart issues. And the grinder reviewer could have mistakenly bought 125mm discs (which is the most used small size in Europe), whereas this one is made for 4.5 inch/115mm discs judging by the included disc.

[@thomasmoore1003]

7018 rods are a little tricky to restart. I always wiped the end of the rod on the free hand glove immediately after stopping. Usually helps restarting

[@zloki83]

Just used my Craftsman Bolt-on drill yesterday. Nice to hear someone else had one.

[@SullySadface]

Non-welder here. It's terrifying for a bunch of reasons but that welder has put down a better bead than I ever have.

[@Loonies2TheTop]

That concrete saw is probably like 15 amps brushed so if its a 20 amp outlet, its gonna blow. Gotta runa 40amp

[@richpeggyfranks490]

33:15 "Even comes in a trash bag". Bah-ha-ha.

[@codyallen5806]

I think a little bit of the vibration and the noise with the grinder was coming from the collet, grinder nut whatever you want to call it was put on backwards for the types of wheels being used

[@Slightly-above-average]

They do come with the clips installed. I just bought a kit from Homedepot and all 9 tools came with them already on them

[@edgee400]

I bought the concrete saw from vevor but not from Amazon for an emergency job i needed it for. It's been 1 year i still use it. I use it mostly with a generator and the disk it comes with binds and trips the fuse once I changed the blade I had much better time with it. It's still working.

[@briangray6538]

I run nothing but Milwaukee M18 tools for my cordless tools A little over a year ago I bought an impact driver it is two speed but basically looks like the one you have there. He got knocked off of a 4-ft wall onto concrete and something inside broke messing up the trigger. I sent it in to an authorized Milwaukee repair center have it warrantied. They replaced it with a new one that come in a brown shipping box that said Milwaukee on it put inside all it had was a clear plastic bag with the tool in it and the belt hooked already it attached.

[@bradasstv]

Now all Sam needs is his own show on the channel 😁

[@Badass_Rooster]

Great Sunday morning surprise! Coffee, Copenhagen and the unscrewed crew!!

[@loopyluap1]

i actually own 3 of that style Milwaukee drills all real bought from home depot and 2 came with the clip on them

[@1pcfred]

That means Home Depot sold you returns. Which isn't terribly surprising.

[@feron450]

That stick welder actually looked like it worked pretty well all things considered

[@1pcfred]

It sure beat having nothing at all.

[@slasherFTK]

That impact looks just like mine from my brushed combo kit from HD 😂

[@BackwoodsGarageLLC.]

Love this channel but I have never once heard a KZbinr ask for shares, I feel like that’s a new typa “please make me money”

[@stevenschmitz803]

You should review every air nailer and stapler at harbor freight. It would be helpful for the weekend warrior looking at attempting to tackle a project but unsure of what’s decent and what’s trash at harbor freight

[@nolanpinkerton9938]

The Ranger needs to make a cameo in every video.

[@zacharybettiker146]

The Milwaukee impact is the uline freebe just got a set in the other day. Check it out John

[@jeromegrunwald9564]

1:58... Milwaukee still makes brushed. 😂 2:12 That's not a Fuel Surge

[@jacobbelt9467]

The Milwaukee impact is the home grade version and it’s 65 dollars so it’s not a scam

[@Kenny-mg1ls]

I'm pretty positive my clips were all on the tools that I bought. And that's straight from home depot

[@shoemaker924]

I dont think the Milwaukee is counterfeit. Milwaukee has multiple tiers of tools. Brushed, brushless, and fuel brushless. Its probably a third party seller buying low end brushed combo packs, and breaking them up selling the pieces.

[@bradasstv]

I always wonder why they dont get an employee to open the items a day before and charge the batteries before the taping.

[@WonkoTheSaneUK]

Sounds like the Iron Fist router has a metric 6mm collet.

[@hustleeveryday6582]

14:00 minutes, the Danger Ranger! Also, I have that stick welder. I purchased it from Temu and it actually works really well. I have a couple of really nice welders that I paid over $1000 for that offer stick welding and I also have plasma cutters, stud welders and spot welders so I am very fimiliar with welders. With that said, I have used this thing a few times for little jobs that I don't want to have to pull the big boys out for and it works really well. It's a typical stick welder, so you have to understand that you don't touch the rod to the surface, and you have to continually push the rod in, not pull, but it does work! I actually used it the other day to weld a handle that gets pushed and pulled all day back on to my commercial lawn mower and it has held up really well thus far. EIther way, it works and if your in a pinch, it will do the job, non doubt in my mind! In terms of the Wen angle grinder compared to "anything at HF" I have a hercules and bauer 20v angle grinder and the Bauer stays on my welding cart and the Hercules stays in my go bag. They are both great quality and I definitely wouldn't compare either of those to that 110v wen grinder. The only comparable angle grinder at HF (in my oppinion) would be Warrior brand that is also 110v and it's inly $14.99, and probably still better and I can say that because it was my first angle grinder that I owned and kept for years and used the shi* out of it and then sold it for $10 an FBGS, and it still worked well! I'm really glad you are reviewing the Vevor cement saw. I have actually been looking at that because the price is SO much less than competitors, but I most likely won't be purchasing it.

[@edgee400]

I love my Hercules stuff

[@alext8828]

Wrap some emery paper around a nail and make that collet the right size.

[@salvadorz5486]

Great series! Love this channel! You guys should test harbor frieght power tools. Hercules versus Bauer versus Milwaukee!

[@howtoolive6387]

The idea of the jig saw/ sawzall is actually a great idea just need to execute

[@patricktrepp7031]

John, avoid the welding smoke. It’s no joke.

[@tetsubo57]

I own several Worx tools, including t6hat saw and love them all. Maybe my needs are just not the same as other users.

[@joseperez-qf4gz]

I have worx too but don’t use there blades they came with use better ones and get the 4ah battery for the one hand recip saw/jigsaw I works better to me than ryobi ones just had to buy more stuff when buying worx tools.

[@Pete_Vids]

All my Worx tools have been working great

[@ricksanchez4813]

I’ve definitely got Milwaukee tools with the clip on. Online, and from stores

[@42neddy]

And here i thought we would go one video without bullying the Ranger 😂

[@bhead87]

That concrete saw. Stihl and Husqvarna have the market locked down.

[@DIT545]

vevor concrete saw is a super lit sleeper i have used that to mill out a 6'w by 6; long by 6' deep conduit pit through 12' rebar foundation i used a diamond saw and i plumbed the saw correctly. made a ton of relief cuts and chiseled them out, no smoke, no sparks, no overheating, no issues, days of work. great buy for what it is

[@DIT545]

the buy made me profit. its just a cheap tool, if it shocks you you have zero legal recourse yes. depending on your reletionship with electricity this could be either a bug or a feature... also i used a diferent blade and i think that blade is not concentric because mine was fine

[@bicbuilds]

i think you should use the tools but put good saw blades/consumables in them. instead of using the crappy consumables

[@ckap8648]

19:50 mark : Sam writes on board to see if sander will remove… 19:56 Sam presses sander down and lifts only to reveal pencil mark not removed and somehow appears darker.. is it a reverse sander?? Did we just create a new tool!!

[@patrickhigdon7050]

maybe test the concrete saw with the electric cords NOT in the back spray from the saw???

[@1pcfred]

That might have been possible if they gave you more power cord.

[@patrickhigdon7050]

@@1pcfred or a bag and a btrick?

[@1pcfred]

@@patrickhigdon7050 I'm no brick bagger so I wouldn't know. I am a hod carrier though. Not that I've ever carried a hod, mind you, but I do happen to know what one of those is. I'm a vested member of the hod carriers union too. So that makes me a professional.

[@dmitrijusciubinskis5156]

this brushed impact model pretty common in EU

[@AgitpropPsyop]

“Milwaukee tools never come with the clip on them” I just bought a drill and driver kit last month and it most definitely came with the clip on it lol

[@Aaron_Jensen]

I bet the Milwaukee is new old stock of an outdated model being sold secondhand.

[@memberwhen22]

Morning, John. Fun way to start the day today.

[@gardenstate235]

I got the Warrior angle grinder from HF for only five bucks after coupon, HF also sell the power which is very good.

[@CardsbyMaaike]

that jigsaw omg..I have an idea: Aldi and Lidl Isle of Shame tools, I have one or two Parkside things one of them a reciprocating saw and a grinder or a handheld saw thing (sorry name escapes me right now) I only use the once in a while so I'm good. I do have a Makita power drill and a battery drill love them, but Parkisde is now endorsed by Arnie Schwarzenegger I wonde rif that means anything ;-)

[@TheGFS]

hahh .. that 16 inch concrete saw looked pretty badass even though it was crap, now I kinda want a proper 16 inch conrete saw and then find some stones to cut ! it just looks like a fun tool to have around :D

[@robertdorr6339]

I dont think the Milwaukee was a scam. That looks like my oldest Milwaukee. Mind you it's 10 years old. Might just be clearing out new old stock cheap.

[@JulieT-kk6cr]

Just an FYI I just bought a new Milwaukee drill from the Depot of Homes yesterday and it did come with the belt clip.

[@awholelotofnothing6456]

I appreciate these videos. I can't afford to put a full range of tools in every truck. So, it's nice to know what NOT to buy as far as multi tools and such go. I miss my old black and Decker "switcheroo"

[@harrisonhowell6778]

Milwaukee does make brushless impacts in some of their "home owner" type kits

[@jarradwright1509]

You should do a garage sales competition. 50-100 bucks each and who can do the best

[@MaritimeUnprepared]

16:20 that concrete looks hard and old af😮

[@bobbydisco2146]

Every Milwaukee tool I bought all came with the clip on them

[@42neddy]

"I took it to a milwaukee repair shop and they told me it was fake??" YOU TOOK IT THERE?? 🤣🤣🤣🤣🤣

[@jgentilucci]

That threat to replace the ranger made me second guess my sub lol

[@lazyslayer0]

1:27 is simply not true... every Milwaukee tool ive bought came with the clip on it.

[@jean-philippecote2660]

this is so fun !!! keep up the good? work !

[@karsonbrown3260]

I was relieved when I didn't hear you say brunt boots 😂❤

[@coreyh.5207]

Just an idea, but I would like for you to review Hercules and Bauer tools from Harbor Freight. I think you’d be impressed with how much better these tools are than the old Chicago Electric Tools.

[@Pr0toPoTaT0]

I bought an impact and hammer drill combo from lowes. The impact sounds so winey like it is a distinct sound i can hear my impact over the other people's impacts I work with lol. Still gotta go back. At least I got warranty

[@havoc7646]

the works nailer is a modification of a generic 18 ga narrow crown stapler sold under numerous cheaper brands which can also fire nails. Though the head being that of a stapler the hammer is to wide so it tends to leave dimpels in the wood when using nails. The stapler nail combo generic one is actually pretty decent fires consistently and has enough power for 50mm nails and staples up to 30mm it tends to struggle with 40mm staples though. Biggest issue it has is the head not being easy to remove in case of a jam, ie you need a hex key to remove it. how works managed to make a perfectly functional if somewhat unbalanced tool into that abomination i dont know.

[@Gauss00e]

M18 NOT fuel is almost full of brushed tools

[@markchatman9583]

Wire that concrete saw up to 240. It was probably designed for the European market. Dumbed down for our measly 120v over here.

[@j.chappel1160]

1 million subscribers and we get Sam a new Ranger? I’m in. 20:25 for verbal support. 😉

[@edgee400]

How about 1 million subscribers he buys someone else a car or truck. I million subs is a lot of coin brought in , so spread the wealth to someone who needs it i know plenty of people in the trades in PA who barley can get to work

[@deaddy9796]

Checking to see if Rose Anvil reviewed Tecovas..... Rose Anvil approved, nice recommendation.