Beleeb MPPT Solar charge controller Review and how to Rv solar controller

User review and scroll thru the menu of this Beleeb solar charge controller and the functions that I picked up on Amazon.
Also a look at the solar panels and battery box along with inside RV battery meter.
Thanks for watching. LINKS BELOW
www.amazon.com...
Be sure to Subscribe 👍🏼 : / @johnnysweekends
Have a question you want answered fast: asqme.com/@joh...
SAVE BIG ON NEW SOLAR PANELS HERE: signaturesolar...
DISCOUNT CODE: JOHNNYWKND
BEST PRICING ON- ECOFLOW - BLUETTI- ANKER- Solar sytems, Solar panels and more!! shopsolarkits....
Discount Code: JOHNNYWKND
CHEAP USED CERTIFIED SOLAR PANELS HERE: www.santansola...
MC4 All in one Kit : amzn.to/37jwLVb
CHECK OUT MY AMAZON STORE:
www.amazon.com...
If you feel I helped you out..Consider Buying me a Coffee 👍🏼🙌🏼👊🏼😀
www.buymeacoff...
TopTes Gas Detector PEN!!: www.amazon.com...
Trailer and vehicle accessories
www.etrailer.c...
Level your trailer FAST & EASY!!!!
Level mate pro2 : amzn.to/3Xp5VkL
BEST GAS CAN!! Surecan Gas can : amzn.to/3Kf5rqn
Protect Everything!! 303 Aero space Protectant: amzn.to/329dkM7
BEST FIRE PIT!! Outland Propane fire pit!! : amzn.to/3rKIkwZ
Generator tent amzn.to/3ddd3ds
Lucas fuel treatment: amzn.to/3IfxQv8
Check out my other channel!! / @poweredwithjohnny
Videos are for entertainment purposes only. Do your own research when it comes to using these products shown in any Johnny's Weekends videos.
Thanks for watching. Above links are part of a affiliate program. I earn a small commission if you buy through the link but charges nothing extra. Thank you so much as it helps creators like me to continue to bring content for viewers.👍👊😊

[@watermain48]

Very informative. Thanks for sharing.

[@johnnysweekends]

Thanks for watching..👍

[@johnnysweekends]

Thanks For watching. Is anyone else using this Solar charger? If so let me know how you like it and if you have had any problems with.

[@greggeorge]

Have it and found it a big improvement over the $16 cheapie it replaced. Most important is the 75V upper range - my two 12 volt panels in series feed the controller at 24 Volts and reach as high as 36 volts. This was outside the range of the prior controller. My only disappointment with the model I bought is its bluetooth only, no optional wifi. The app LDSOLAR -iConnect app is a nightmare to set up properly, and will tell you you can use wifi all day long when you can't. Overall, I'm very happy with this unit for my 24V LiFePO4 battery array.

[@johnnysweekends]

Nice. You have a newer model. mine is gone as it went bye bye with my other trailer. Did great though while I had it.

[@aurum79argentum47]

@@johnnysweekends Of course I bought an open box retread from Amazon and saved about 50% because I'm a cheap retired guy. Theb box was smashed on one end but the unit was new.

[@johnnysweekends]

Awesome !!! That’s a score! I would do the same. A deal is a deal. 👍🏼

[@jbphoto8238]

Do you happen to know how do I change the volt on this to 12v. Mine currently is setup at 24v and the manual is pretty useless on how to change this.

[@Gerardo-cv7kw]

I just bought this charger. Im installing 3 250w solar panel on my shed withing the next 2 weeks so i hope it goes smooth. How ate you liking it ?

[@johnnysweekends]

Hey, so far it's great. Wish it was spring so i could get a solid 4 to 5 hrs of clear skis to see full production but soon enough. 250w in series will be over watt in 12v are you doing 24v..?

[@Gerardo-cv7kw]

@@johnnysweekends No im doing a 12v system thats what i have at the moment but eventually when i get enough batteries( in process of testing 200 18650s) i got 3 panels for $60 at a recycle place near me in great shape. I tested them there in the shade and they were producing 30v+ anf 5.5amps+

[@พิธารักในหลวง]

vs srne or epever who best??

[@johnnysweekends]

Victron is best currently but is a little more expensive.

[@davidkettell6236]

it works but i have found no wat to make any settings

[@johnnysweekends]

It’s been a while since I set mine but I think to change the settings it’s press and hold the top left button after you select from the bottom button but again been a little while since I have set mine. But still been using it and works great…🤷‍♂️

[@KadinGoldbergArtStudio]

Hi! Thanks for the video! I can’t seem to find my manual or contact for the company. Just curious if you know what it means when there is a caution triangle with a ! flashing as well as mppt and the battery icon flashing? It seems like all the voltage is correct but these flashing symbols makes me think something is wrong!

[@johnnysweekends]

I would check input voltage to make sure you are not putting in to much power for the controller. To many volts can fry it. Also any wires crossed. Is solar working correctly Is output of controller working.. Is any wrong with battery or connections? If all of those are good either to high a voltage or maybe faulty unit.

[@KadinGoldbergArtStudio]

Thanks for the reply! I think I may have figured out the problem but not how to adjust the setting. I’m running a 24v system but the controller is showing 12v on the bottom left. Any way you could tell me how to switch this to 24v? Thanks again

[@johnnysweekends]

Well I sold my last trailer that had the unit in it lol and Instructions…so I don’t honestly remember. It was hard it’s just more of messing around with the settings and you end up finding it. This is when you really wish you had Bluetooth 😂👍🏼

[@KadinGoldbergArtStudio]

@@johnnysweekends ha! 😄. Well, I’m pretty sure it is supposed to automatically find the voltage that you have set up. Which it isn’t doing so I guess I’m in the market for a new charge controller! Thanks for your time! 👍

[@johnnysweekends]

Yea that’s kinda what I remember but wasn’t sure. Bummer well lots of good options as more on the market and getting cheaper.

[@amalgamatedrick5975]

I have a China 12.8 v 100 AH battery. The instructions for this manual lfg lf8 and lf4. Can you tell me the proper setting on the 30 amp mttp controller. Thank you in advance

[@johnnysweekends]

I don’t have this unit anymore since it was installed in the trailer.

[@aurum79argentum47]

String of 4 x 3.2 V = 12.8 V for LiFePO4. This is a 4S configuration.

[@amalgamatedrick5975]

@@aurum79argentum47 thank you thank you thank you

[@tacticalpickle7]

Just saw your video. How is that MPPT controller is working and if you still recommend. Thanks

[@johnnysweekends]

Using it right now at Patrick’s point …. Still working great 👍🏼 I throw a KZbin short up tomorrow for fun 🤩

[@tacticalpickle7]

@@johnnysweekends Good deal I am still looking for a reasonably priced MPPT charge controller. I have about 3 in mind this one is one of them, looking forward to your video.

[@johnnysweekends]

Yea been using it for a few days this trip, I did a you tube short did it come up on my feed…?? Not really familiar with KZbin shorts so figuring that out lol.

[@tacticalpickle7]

@@johnnysweekends will look for it now

[@johnnysweekends]

Yea let me know

[@wolfheart2443]

But is it a true MPPT?

[@johnnysweekends]

Yes this model is.

[@wolfheart2443]

Great, Thank you for the reply. 🙏💪

[@johnnysweekends]

No problem 😃👍

[@nemoexpress3426]

I was looking at one of those charge controllers but I don't think it's user friendly enough for a 4s, 16 volt configuration.

[@johnnysweekends]

Yea its normally just the 12/24v setup on these but handling it can do more then that.

[@nemoexpress3426]

@@johnnysweekends will it charge to 16v?

[@johnnysweekends]

I know you can change perimeters on it and in the specs it says battery voltage range 8v-32v. So i believe so can change them pretty high although never done. I know that it gave more options then needed for the average user. I do like the fact i can change these to suit a lithium battery specs in the future. So it may be possible to set to a charge of that high. You wanna float at 16v.... What battery do you have..?

[@nemoexpress3426]

@@johnnysweekends it's some 18650's left over from a 7s 120p build, so for fun I thought I'd build a small 12v 4s 48p. It's not going to be worked hard. I'm trying to keep it small and the color scheme is green and black, which is why I was wondering about that controller.

[@johnnysweekends]

Wow those are small lol. I would think it would work. But dont know untill you try on that one.

[@davidkettell6236]

i have learned nothing!

[@davidkettell6236]

i am throwing this in the trash as theer is no way to program this unless you speak spanish apparently

[@johnnysweekends]

I didn’t find it that hard after messing with it for a few minutes. The instructions are not great but you figure out the functions after a couple times around.

[@greggeorge]

Agree. Piece of cake. Worked out of the box after setting battery voltage and type. Bluetooth app was a pain but works.

[@amalgamatedrick5975]

I have a Chin's 12.8 100 amp hour lithium ion phosphate battery can somebody tell me what setting I should be using? Instruction manual says 16 series 8 series 4 series... I have no idea and everytime I look it up it just talks about parallel and series

[@johnnysweekends]

@amalgamatedrick5975 if you have one battery you should just be plugging it in. No series no parallel. 12v set up and set to lithium to charge

[@aurum79argentum47]

@@johnnysweekends From the manual: LF4 (LiFePO4 4S / 12V) LF8 (LiFePO4 8S / 24V)