Jon Boat Electrical Wiring for Beginners and DIY'ers

Jon Boat Electrical Wiring for Beginners and DIY'ers
Project Bottomland Bateau: Episode 17
Want to master the electrical wiring system in your duck hunting, catfishing, bow fishing, or bass boat build? This is what you need right here. We cover everything about what wire to use, wire sizes, amp ratings, connectors, solder joints, running wire, fuse panel set up, batteries, and much more. And as always don't forget to stick around to the end of the video for the bloopers and the hater's corner!
EVA Foam Turf Decking used in this boat build:
www.hydrodeck....
Buy Send It Jon Boats Shirts, Hoodies, Hats, Decals here:
thejonyacht.co...
Check out great deals and discounts from our channel sponsors:
5% off promo code for Tiny Boat Nation Outdoors, for all your boat building materials and accessories.
Visit www.tbnation.net
Use promo code: FULLSENDUNICORN
10% off promo code for Freedom Lube, The most American oil you can buy!
Visit www.freddomlineproducts.com
Use promo code: ATF10
Link to One Hit Wonder Paint:
www.ohwpaint.c...
Get 5$ off your OHW order use code: ATFHYDRO
Tin Can Crew KZbin Channel:
/ @tbnationoutdoors
Camera gear we use:
Camera Lenses: amzn.to/36rcdE4
Camera Mount: amzn.to/2GqMroQ
Flex Mount: amzn.to/2tIDLHY
Flex Tripod: amzn.to/2ux7CTB
Tall Tripod: amzn.to/36xUgUF
Lav Mic: amzn.to/2t27awm
Products used in the boat repair video series:
Kreg Rip-Cut saw attachment: amzn.to/35PHhxq
Jigsaw blades: amzn.to/2DCjLb4
Straight cut router bit: amzn.to/2ODUMut
Wood glue: amzn.to/2R7DxTN
Wood clamps: amzn.to/2Y6aW2C
Fiberglass resin: amzn.to/2qbD5Jl
Chip brush: amzn.to/380rbTN
10X20 Canopy Cover: amzn.to/2Gzyqsq
Standard Rivet Gun: amzn.to/32afGFW
Large Rivet Gun: amzn.to/33rFeyj
¼ Inch Sealed Rivets: amzn.to/2MBQTEb
3m 5200 Sealant: amzn.to/2McyOgP
JB Marine Weld: amzn.to/2B91iC0
Brazing rods: amzn.to/2nGoa8A
Brazing Flux: amzn.to/2OGsgZz
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Rivets: amzn.to/2PJwccl
Welder: amzn.to/2C7OLiv
Welding helmet: amzn.to/2WLNY0k
Welding gloves: amzn.to/2PIMRgo
Angle Grinder: amzn.to/2qglTC0
Flap Disc: amzn.to/2qmaMY4
Float Pods: www.explorebea...
22 Inch Light Bar: amzn.to/37zNboI
11 Inch Light Bar: amzn.to/2N2wiJS
LED Navigation Lights: amzn.to/30HJv2J
3/16 Inch Sealed Rivets: amzn.to/2zEFoJE
Grab Bar: www.beaverdamm...
Marine Grade Duplex Wire: tbnation.net/c...
Trolling Motor Circuit Breaker: tbnation.net/c...
Heat Shrink Ring Terminals: tbnation.net/c...
Fuse Panel: tbnation.net/c...
Battery Disconnect: tbnation.net/p...
Switch Panel: amzn.to/3IaMqUn
Watch the entire Project Bottomland Bateau Series:
• Project Bottomland Bateau

[@Hydrokracker1]

"I'm not making this boat look fancy like all these bass boats you see on KZbin." -Makes the Jon boat fancier than all the fancy bass boats on KZbin. Seriously, your boat looks great.

[@joshuaskirvin]

Industrial Electrician and Maintenance Tech here. I've been in this field my entire adult life. Residential, commercial, industrial and line work. Don't listen to the inexperienced keyboard warriors. You might not be perfect or doing it their way, but it looks good to me. I thought about a way you could've done the control board a little different, but that was just a personal preference of mine. You did a good job. It was a good video.

[@SendItJonBoats]

thanks, glad you enjoyed it. Appreciate you watching even though you do electrical for a living. LOL

[@CatfishWeekly]

After being in the automotive industry my entire life, working on ever thing from ambulances to handicap vans, this is one of the better wiring video's I have seen for people starting out

[@SendItJonBoats]

Thanks bud! Glad you enjoyed the video, appreciate you watching.

[@Catfishbill66]

I agree Lyle I just bought my project boat and watching his videos this guy is awesome

[@catcher197]

Gosh this seemd so simple when I first bought the boat. After a few more weeks and a few dead ends, finally getting to doing this wiring seems a bit more daunting to be honest. I am not an electrican by any means and props to you for getting this done so smoothly

[@SendItJonBoats]

Its like anal, the first time is always the worst, then it gets easier. Wiring ain't hard once you understand the concepts.

[@andrewlewis3267]

Awesome video! Just finished wiring my first jon boat it this video saved me!

[@John-of5sh]

This video was EXACTLY what I was looking for! Never thought about a cut-off switch to shut everything down. It's on my shopping list! You are so right about skimping elsewhere, NOT on marine grade wire! I have one suggestion and you can take it or tell me to shove it. Next time a troll starts giving you shit about what they thought was wrong, etc. simply say "Thank you for sharing that with me." They never know if you are serious or screwing with them. If our paths ever cross remind me I owe you a rack of beer for taking time to share your expertise and time with us so we can get it right the first time. Thank You Sir!

[@SendItJonBoats]

I am going to use that line... I would love to see the confused look on Scooters face LOL. THanks for watching, glad you enjoyed the video.

[@thedangler1371]

I’m an electrician for homes and you did a fine job! Boat and automotive wiring is foreign to me. Great work man

[@SendItJonBoats]

Thank you sir! Appreciate you watching and glad you enjoyed it.

[@NICHOLASBYRNE3931]

Does the Copper tinned cable allow increased current carrying capacity?

[@anthony445]

⁠@@NICHOLASBYRNE3931no, if anything it adds slight resistance but nothing that would change the amp rating of the wire. Tinned is just good to protect from corrosion.

[@Oper8or]

I stumbled on your channel yesterday. My wife and I watched a few of em. Wasn't looking for boat stuff at all. Spent a few years of my life building boats and jet ski's for a couple of companies though, so I can relate a bit. My wife flat out said "Is he your long lost brother or something because you two act exactly the same". I'm not aware of any long lost brothers but she made a damn good point. I cannot wait to get in here and hurt the scooters feelings. Time to start browsing comments.

[@SendItJonBoats]

LOL, we could be long lost brothers! Hurt them scooters feelings all you want.... they need a hug LMAO. Thanks for watching.

[@jonmcguinn603]

This is hands down the best video out there for anyone looking to tackle their own electrical overhaul

[@SendItJonBoats]

Thanks bud, glad you enjoyed it.

[@sethbrown8912]

As my friend would say, "You are an idiot!" That is his highest compliment in evaluating humor. You are funny and also know what you were doing. Great stuff.

[@SendItJonBoats]

Man I love being an idiot! LOL I'm very familiar with that term in humor. Thanks for watching.

[@freas8520]

Well done! Finally someone who parallel connects two 12 volt batteries correctly.

[@SendItJonBoats]

Thanks Patrik

[@davidgodfrey7560]

Hey, mind telling me what gauge wire you’d recommend using for paralleling the two batteries? Thanks

[@freas8520]

@@davidgodfrey7560 I would just take the same gauge that comes to/from the batteries.

[@malibujoe01]

One of the best informative boat wiring videos I've ever seen! THANKS for explaining everything you did instead of glossing over stuff! NOT EVERYONE is a professional electrician!

[@SendItJonBoats]

Thank you, glad you enjoyed it and learned something. I try to make it easy for people to understand.

[@mathewweeks9069]

Your awesome dude and awesome video be safe out there

[@SendItJonBoats]

Thanks! You too!

[@mathewweeks9069]

@@SendItJonBoats your welcome have awesome day be safe out there

[@mikebrannen3567]

This was a Great video. I like that you are quick and to the point. No messing around. You keep it simple. Thanks!

[@SendItJonBoats]

I appreciate that! Glad the video was helpful.

[@strinity511]

This is such a helpful video, thank you brotha.

[@scottcarlson2788]

Fantastic job explaining the electrical elements of a little build. The mansplainer rant was a bonus. I am rebuilding my 12 ft v-hull once again. This time, to get it lighter and easier to load/unload, I am trying to make everything in the boat removable. I have more time than I have back strength and my favorite boat launch does not allow trailers.

[@JoelHanson-xy2ng]

Probably the best wiring video on the internet. …rocket surgery, simplified.

[@SendItJonBoats]

Now your a certified jon boat rocket surgeon.

[@Chipndales]

I triple shield any wiring I have to run outdoors. So for anyone wondering what that looks like, you have your base insulation + your own added heat shrink/tape + proper looming sheaths. Never had a comeback for wiring or electrical. Never had to rip out or replace a harness in the past 10 years, actually pretty funny my harness was holding a golf cart together after it crashed. Kept the battery from coming out.

[@xShark]

Thanks to your video…I completely rewired my entire boat for a 24 volt trolling motor, front and back lights hooked up to the circuit breaker and toggle switch panel. Thanks for the vid!!

[@robertjason5215]

Starting my rebuild on my 15’6 Lowe your videos are extremely helpful

[@SendItJonBoats]

Glad I could help, appreciate you watching the videos.

[@nonyabiz2777]

Why do folks need to criticize?? I just click off the video if I don’t like it. I watch all your content from start to end. Nice work sir.

[@warrenbridges4095]

I was just browsing through KZbin looking at different boat wiring videos then I saw the "Reserved for LSU" sign on your wall... Instant Subscription. Very informative video also...

[@nsmerilli1]

This is the best video I’ve seen to explain wiring a jon boat.

[@SendItJonBoats]

Thank you, glad you enjoyed it.

[@jeffsmathers3007]

Keep doing what you are doing. I am looking to start a boat project later this year and I found everything very informative.

[@SendItJonBoats]

Glad I could help. Appreciate you watching the videos.

[@Electronzap]

Nice demonstrations.

[@JAdame24]

Man I was going to start wiring my boat today and after watching your video I’m completely rethinking my wiring plans haha.

[@SendItJonBoats]

You can do it! It is much easier than it looks.

[@TS-eg8dm]

Great video by the way

[@SendItJonBoats]

Thanks so much, glad you enjoyed it.

[@shanemiller6947]

My kid of guys here about time someone smart got on KZbin telling folks who's boss thanks bud keep up the hard work I love it

[@SendItJonBoats]

LOL thanks Shane. Glad you like the videos

[@lenbrewer9351]

Most comprehensive Video I have seen, very neat and very professional work. Thank You

[@SendItJonBoats]

Thank you Len, glad you enjoyed the video.

[@stevea6722]

Fine job on the wiring. Agree with the statement about NOT grounding the electrical thru the hull but it has nothing to do with electrolysis, if any of your hot wires rub thru the insulation then you have a direct short with a potential for a fire if no circuit protection. Seen it happen.

[@SendItJonBoats]

Thats a great point too. Thanks for watching.

[@brandondonahue3787]

Best boat wiring vid on KZbin. Thanks so much!

[@SendItJonBoats]

Glad it was helpful!

[@TNelsn-h2y]

Awesome video! I have never messed with this kind of project before. Im not bitching! You taught me something and my kid thinks Im a genius. Thank You

[@SendItJonBoats]

Always nice to have your kids believe that you are a genius!

[@billroberts8253]

I enjoyed this I’m 82 years old and I still don’t understand it but I learned a lot thank you for your time in trouble they’ll

[@adamj7067]

The explanation of the switch panel was just what I needed. Great job!

[@toxicpaintball03]

Imo this is the perfect layout for a Jon boat on KZbin I’ve seen

[@brucepiggott1493]

I’m 53 years old. For years I’ve used a lighter on shrink tubing with mixed results. Since my viewing of this video I’m now a owner of a new heat gun! My pragmatic side once to say thanks. My ego once to tell you something else! You’ve taught an old dog……..thanks

[@SendItJonBoats]

I love my heat gun, so much better than burning my thumb on a lighter like I did for years.

[@lynnharper6291]

Hey man, I am almost finished with my 1972 Monarch 14 footer. I watched your videos cuz you do a great job explaining how it. I just have to hook up battery switch and switch panel. I would send a couple of pictures if I can figure it out, thanks for all your videos they gave me the convenience I needed. By the way I hooked my navigation lights up right the first time. LOL.

[@SendItJonBoats]

Glad I could help

[@meangunmorris7677]

KZbin certified technician, I knew I was in the right place 👌

[@SendItJonBoats]

Master certified... get it right. LOL

[@Reeser00]

Excellent video! I’ve watched about 5 already and this makes the most sense for my boat! Thank you

[@SendItJonBoats]

Awesome, glad you enjoyed the video.

[@danholloway3840]

I just bought my first boat ever (16ft v bottom Jon boat) just something to take the kids out fishing on and I’d have to say out of these boat wiring videos this is one of the best ones!! Keep up the great content!! **Subscribed**

[@SendItJonBoats]

Thank you Dan, glad you enjoyed it and I appreciate you watching.

[@mte874]

This guy rocks and is hilarious 😂😂 fantastic video, thank you! 🤜🤛

[@SendItJonBoats]

Thank you, appreciate you watching the video.

[@BillBirdsall-e6m]

Great starter video. Thank you. Just re wiring my aluminium boat with same switch panel. Keep up the good work - from Australia !!

[@flippa1976]

I just came across this vid and found it to be easier to understand than pretty much all the other vids out there and your Scooter comments at the end are are great touch, very entertaining 🍻👍

[@SendItJonBoats]

Thank you, glad you enjoyed it.

[@bobbydavis9618]

Best video I’ve found on boat wiring!! Thank you!!

[@KenLoveday70]

I understood this wiring video better than any of the other videos I’ve watched Thank you for the video scooter can take a hike

[@SendItJonBoats]

Glad I could help. Thanks for watching.

[@bradritter529]

Absolutely the best help video I've seen. Wasn't sure what I would find when I searched. Spot on and easy to follow. Thanks for the laugh as well. Got to love them Scooter's.

[@SendItJonBoats]

Thanks for watching, glad you enjoyed it.

[@SkunkMonkey991]

Great job and thanks for the tutorial. Love the bite back at the keyboard genius haters! Haterade.....classic!

[@SendItJonBoats]

Got to give the haters some love... they need all they can get.

[@SOFAKINGDEAD13]

😂 “plop your happy lil chocolate starfish down” 😂

[@SendItJonBoats]

Apparently I'm the only person that calls it a chocolate wrinkled starfish.

[@DavidSanchez-cd7fz]

Great video. I’m doing boat wiring and just bought marine wire because of your your advise. Thanks man

[@SendItJonBoats]

Glad I could help, you will be happy with marine wire, I am glad I spent the extra money on it. Peace of mind

[@kencrump9661]

I came here to double check my work, but just needed to say your intro is great, had me not skip to the wiring part... that says a lot.

[@davedavies6518]

Great work, all looks very professional and very clearly explained. I would have put each sump pump on it's own fuse not wired together. This way if one sump blows a fuse you will still have the other. This may not be necessary but, gives an extra layer of safety. Thanks for posting such a pro video.

[@amberlloch1]

Thanks for putting me on the solder wire connector game!! These things are awesome!!

[@jasons4586]

as a beginner, learned a lot. thank you.

[@SendItJonBoats]

Awesome, glad I could help. Appreciate you watching the video.

[@codyplaisance3505]

Love your content bro keep it going

[@that1had2hurtvr81]

I don’t really sub to people on KZbin, but you earned one today. This video is a huge help to wire up my future ex Jon boat. Not only was it informative I am SO glad I stayed for haters corner. I laughed harder at the see cashier comment than I rightfully should have. The moose comment was one hell of an escalation lol Great video!

[@SendItJonBoats]

LMAO, thanks for watching. GLad to have you as a sub. More videos coming soon.

[@timestes7090]

Love the kiss methods, Love Haters Corner. Keep up the good work.

[@SendItJonBoats]

Keeping it stupid since 1987!!!! We love it. Thanks for watching

[@OuzoLouGarage]

Thanks for explaining about car wire and the difference of boat wire.

[@SendItJonBoats]

Glad I could help

[@tomjoad1060]

thank you for the video! nice sense of humor...))

[@SendItJonBoats]

Glad you enjoyed it!

[@jamesrigg3247]

Perfect timing Im currently doing my wiring very helpful thank you!

[@SendItJonBoats]

Glad I could help, thanks for watching

[@jesseauer7649]

Yeah, I’ve got some wiring projects in my future too. Thank you Send it!

[@StefanWoldekidanKunskapsskolan]

Hahaha! Haterade(sorry for the spelling)! Brilliant and way to tackle haters. Rest of the vid is super, I learned a lot.

[@SendItJonBoats]

LOL thanks for watching, glad you enjoyed it

[@haroldbolton3383]

Very much enjoyed the scooter section, thanks for the wiring info as well.

[@SendItJonBoats]

Glad you enjoyed it, thanks for watching.

[@graintrader8000]

Great play by play explanation! I'm building a boat and your example will help me out a lot.

[@fourstarrjim]

Great info. Thanks fir explaining the difference between marine wire and automotive wire. All this time I thought I was just being ripped off. I really like the battery disconnect switch: I need it install one on my duck boat.

[@SendItJonBoats]

I thought the same thing for years until I actually researched it, and then experienced some wire issues myself from using automotive wire. The battery disconnect is awesome, and not expensive either.

[@calebgoins1]

@@SendItJonBoats yea man thanks fir this video I enjoyed the information. Not to be a scooter but thanks fir everything you’ve taught me here. Fir the first time I actually understand how to wire up everything fir my boat. Fir the record I think ur boat is awesome it’s a perfect boat fir gettin out on the water and fir havin a good time. I think I speak fir everyone when I say this keep up the good content.

[@codybreeding7718]

As a professional technician I use a lighter on heat shrink all the time lol I have a heat gun too but a lot of time I can’t fit it in places without overheating something else customers don’t like melted trim or plastics so I got it quick with a lighter but hold it close in the blue part of the flame and keep a good motion it didn’t leave any soot at all on mine I use those solder heat shrinks a lot and even works with them again without soot or overheating the heat shrink just need to know what your doing and a lighter work fine lol love you video tho I am wanting and wishing to get my first boat I want a job boat and build it into a mini bass style boat I just live in an apartment so I can’t get a boat but I love your information on wiring thank you

[@delricoeppes]

good job and super funny

[@SendItJonBoats]

Thank you!

[@arcturusbbqsausagemaking2435]

Great video... Scooter Corner lol ! Dude if I win the lottery I'm buying you a new boat+ Cash

[@SendItJonBoats]

Deal! Thanks for watching!

[@fadedculture7507]

Gotta be a Marine. From the crayon references to the range reference in “send it”. Love it! Keep pushin bro. Comments can pound sand

[@drap2010]

I don't even have a boat...I just enjoy your videos 🤣🤣🤣🤣🤣

[@12Deathcon]

You did a great job and the advice given is A grade, as someone who does a bit of automotive / marine wiring / instrument wiring. The only thing I generally do differently and its just a me thing.. I'll use glue lined heat shrink, liquid electrical tape (LET) and dielectric grease. If i cant use a glue lined piece of heat shrink ill paint the cable with the LET and slide the shrink over when it goes tacky. If its a solder joint with no glue lined ill put dielectric grease over the joint, then LET and then the non glue lined shrink. Ill also grease all terminals I am connecting (even auto plugs) to reduce the corrosion chance between the metals... Nothing worse than going to remove a panel or fix a term and everything has corroded together. on a side note and amazingly enough...When you were talking about the grounding to hull. I wired my mates Stacer Seamaster 519 last year and was horrified to find that they do a negative hull set up with a stud welded next to the battery and under the console. I questioned Stacer and got told because the engine (Yamaha F115) has a sacrificial anode in the engine and a second one on the trim plate the hull wont become an anode. We only run in brackish and salt water... the hull is showing signs of minor anode corrosion where the coating has been worn away with the beach landings we have done... Go figure Keep it up, love the channel

[@patsmith1783]

Love the Haters portion ha!ha!....... Come to Alaska during the winter !!! I've seen light bars on everything , Hard Hats , bicycles , Mini Van's, and a few Subaru's with them mounted right in the middle of the hood lol ......... Oh but you know you also can never have to many either , you evidently need them for fog lights , at least one the bumper , some in the grill , a great big 60" on the top of the cab and don't forget about back up lights!!!! lol ........ all for a daily commute on a populated 2 lane highway!!! Oh by the way don't forget to upgrade those boring factory head lights to HID's !!!! By the way, that boat turned out really nice !!!!

[@SendItJonBoats]

Heck no Alaska is waaaay too cold for me. Even in the summer. I need those 110 degree days in georgia.

[@Threee_Eyez]

Thank you very much sir, exactly what I was looking for. Very well made instructions and thoughtful for newbies.

[@johnnyspropshop]

Great video, made it to Haters corner - Subscribed. Thanks to all the Scooters.

[@SendItJonBoats]

Welcome aboard! Glad you enjoyed it, appreciate you watching.

[@the900bot]

This video is the one that does it best, even tb nation and Anthony’s videos all bring a confusion aspect to it all This is through and through understandable and great work

[@SendItJonBoats]

Thank you so much, I am glad you liked the video. I try to keep things simple and easy for people.

[@thegrumpybusinessman3400]

Big love from the UK. Great helpful video. The haters section was amazing. I’m crying lol 😂

[@SendItJonBoats]

well hello from across the pond! Thanks for checking out the video!

[@apope2311]

Hilarious dude, so much respect. Just inherited a boat dad had taken apart to re-wire, rn I’m working on my license.

[@SendItJonBoats]

Nice, good luck with the wiring, I hope the video helped some.

[@tkevin849]

Even we are manufacture of bilge pumps, learned more from this great video

[@SendItJonBoats]

Awesome thanks for watching.

[@davidcobb4527]

Lmfao!! Thanks brother, loved your video. Especially “haters corner”! There ain’t no pleasing everyone. And if they’ve got better ideas, then tell to step up and make their own vid!! Awesome content, love it!!

[@SendItJonBoats]

Thanks David, appreciate you watching. Glad you got a laugh out of the haters lol.

[@macmc6590]

Very good detail! While also being very entertaining! Perfect!

[@SendItJonBoats]

Thanks for watching! Glad you enjoyed the video.

[@hondo8245]

I had 14/3 left over so I just used my romex, I just pulled the black and white wires and used liquid electrical tape to seal it from the elements, has worked so far for me, great video

[@aaronsouthern3300]

Shit man, now I’m certified! Great video

[@SendItJonBoats]

Next time you go to homedepot, show them your KZbin certified master boat builder card! You get free coffee lol.

[@rockydubois2418]

Jon boats are so easy to rewire. I’m jealous as hell. I have to cut multiple access holes and buy inspection hatches just to find the wires in my old foam filled center console Henry O

[@SendItJonBoats]

Ughh that sucks cutting access holes. Jon boats are so easy.

[@razzso1482]

Love the Content!

[@SendItJonBoats]

Thank you. Appreciate you watching.

[@Anonymous99997]

“Calm down, Trainwreck. This is not your station.” Perfect.

[@SendItJonBoats]

LOL, thanks for checking out the video.

[@BuCkYwUcKy123]

Dude you are the best!! Love that you are partnered with the jon yacht too 👌

[@SendItJonBoats]

Yes sir, good people and they make good stuff! Thanks for watching

[@johnwilliamson5684]

Love the scooter responses best!!!! Seriously good info

[@SendItJonBoats]

Glad you enjoyed the video. Thanks for watching.

[@ME-qq2dc]

Nicely explained, cheers mate from Australia 👍

[@SendItJonBoats]

Thank you, appreciate you watching all the way from across the pond.

[@terrykleier5068]

Always enjoy the scooter summary

[@SendItJonBoats]

Awesome, thanks for watching.

[@MrKNOX2k]

The intro was the greatest 😂😂😂😂😂

[@SendItJonBoats]

Lmao, glad you liked it. Thanks for watching.

[@tonyspoon795]

I'm new to your channel I look forward to seeing more video this wiring helped a lot I just wired my pontoon and after seeing this video I don't like the way I did mine so looks like this weekend I'm redoing the wires on my new switches and put battery kill switch on it and a breaker on the trolling motor thanks for taking the time to make this video very helpful thanks and I don't understand people why they want to tell you that you did it wrong some people are just stupid and like I tell my nephew all the time you can't fix stupid thanks again my friend for the help on the wiring .Tony from Easley SC

[@SendItJonBoats]

Glad I could help. Appreciate you watching the video, hope you learned something helpful.

[@brucenilssen1235]

Excellent video. Very well explained. Thank you.

[@kurtshinn9498]

I knew most of the stuff you did but I thank you for the other stuff I didn’t know. Thanks

[@stco2426]

Nice. Glad you tuned down the music when you were speaking. Appreciate that.

[@SendItJonBoats]

Thanks, appreciate you watching the video.

[@deep6predator1]

you rock scooter. i'm hooked. love your electrical wiring for me (beginners) loved the scooter ending

[@SendItJonBoats]

Thank you!

[@chrisj2713]

Great vid. Thanks for taking the time to break it down.

[@SendItJonBoats]

Glad it was helpful!

[@paulvanderbeek3761]

Hi just started building my own boat and with your video's give me lot of tips how to do things. Thanks and keep it up .

[@SendItJonBoats]

Great to hear! Appreciate you watching.

[@kevintidwell7156]

Your boat is going to suck

[@paulvanderbeek3761]

@@kevintidwell7156 that is very nice of you lol thanks

[@haroldmitchell92]

thank you so much for this video it helped so much

[@SendItJonBoats]

Awesome, glad I could help.

[@Top10BestCreators]

thanks so much this helps a lot!

[@brunocauin]

Bro, f**k the haters! Your wiring looks awesome. Great video! 👏👏👍🔥

[@SendItJonBoats]

Gotta give the haters some love my man.... all fun and games! Thanks for watching

[@dakkedankos4116]

Great video! I have 30-year-old marine wire on my old boat, it still works. The previous owner did all the Chartplotter wiring with normal wires, 2 years later it all failed and roasted the Chartplotter. Always use marine-grade electrical components and wiring.

[@SendItJonBoats]

Thanks for sharing, I try to tell people all the time that marine grade is worth it.

[@Jarochester]

Man I forgot all about you. Glad to see a new video

[@SendItJonBoats]

Things got a little busy and was not able to post for a while. Got some new fun stuff in the works.