GEPRC TinyGo beginner friendly 4k tiny whoop 100% ready to go out of the box

[@chrispello5487]

Thanks for flying it with the controller and goggles it came with, other youtubers most times use fat sharks and better controllers and we dont get the real experience

[@delvpf6671]

Lol those goggles just say “goggle” on the front.

[@AJisdabombsauce]

I covered it with the GEPRC sticker lol

[@mateopavolini]

@@AJisdabombsauce i have a sticker saved just for that

[@edgararcega3046]

Luckily my wife is a crafter. Il have her customize the goggles for me

[@MrSarcasm101]

What concerns me is the font they used. It's not Comic sans but come on...

[@dubsrcfpvandfamilyfuntimes913]

I got this kit 6 months ago! Still having a blast with it! I prefer it over my tinyhawk 3!! Handles wind much better! If you mod the pigtail to xt30 and run it 3s it rips pretty good! Take care! Rad videos! Thanks

[@thatguyaust1n637]

Xt30, Is that the video antenna? And by 3s what do you mean lol? Wanna get into fpv drones

[@kevinli3430]

@@thatguyaust1n637 xt30 is a type of battery conntector, 3s mean 3 cell battery

[@wodmarach]

It might be time to do a re-review of this kit almost all of it has been replaced with different parts looking at the product page...

[@SubZ3ro907]

I've watched 2 of your videos about the tiny RTF FPV quads. You make it so simple to understand. Of all the content I've watched, yours has been my favorite. My friend gave me 5 RTF tinyhawk kits to get me started. To me they feel cheap and hard to fly. Maybe I should just stick to those until I gain the experience to move up? I hope to see more from your channel. Definitely going to subscribe. Thank you.

[@namr2000]

I feel like the proprietary RX's really make this a deal breaker. It sucks to invest in something you know you'll one day replace.

[@medrone7097]

...Something you know you’ll have to replace next quad. + goggles & remote have no resale value when you break the quad. That said, I’m sure it will be gr8 for some.

[@chill62751]

I'm not currently into FPV but any real hobby is money you will probably never get back. I currently have 4 drones, 2 cheap ones $200 and 2 mid level over $500. This kit looks like a great start.

[@namr2000]

@@chill62751 I really wouldn't agree. Your ground kit is one of the few things in FPV you don't have to replace often, especially the controller. I think any of the other ready to fly kits are better than this one. Or heck you could buy a mobula6 HD, the betafpv controller and some good box goggles for a similar price and have an HD whoop that's way better than this kit.

[@vernelfpv]

this is the reason why i like your videos. you are honest and do not just advertise a drone

[@mattalford3932]

I just bought this. It has an updated radio that runs on 2 18650 batteries or a 2s lipo. Some internals got upgraded too i think.

[@Jayveer_Gadhavi]

Are those 18650 batteries included in kit ??

[@JP-qq2kn]

For an absolute beginner the Betafpv advanced kit is the best. Everything works well, No betaflight bs to worry about. but once you get good and want to mess with betaflight you can just upgrade the quad to a emax tinyhawk freestyle 2 n it all works together. that would be plenty of quad for a beginner.

[@michaelrubio15]

What’s the difference with advance kit and Cetus?

[@JP-qq2kn]

@@michaelrubio15 Cetus has a altitude hold type of mode. Much easier to fly.

[@michaelrubio15]

@@JP-qq2kn thanks

[@JimBridgerHarney]

Good note: I bought this kit and it now comes with a similar remote except that it uses ELRS , has a replaceable antenna, can connect to your computer via Bluetooth, has very smooth gimbals, and can work with 4s or an included battery tray for two 18650 batteries. It was a very pleasant surprise! Now that I’m getting more familiar with things, I’m going to switch the drone over to a walksnail mini 1s lite as a pocket size cruiser and save the loris for a more acro or race build. Glad the roomy frame can accommodate the upgraded video.

[@deant6627]

I really like the Eachine Trashcan, comes with a XT30 to convert to 2S, really has some power for a woop.

[@nsbob70]

Interesting video. I'm guessing you switched between the digital recording and the actual signal to the goggles here n there, as the one is way clearer than the other. I LOVE LOVE your yard and neighborhood! Another product I can't decide on, as the emax goggles have that removeable screen/monitor, as I have no idea if I could handle goggles to start with, as you know, the emax one can be removed and mounted on the transmitter.

[@MasterApeFPV]

Hey Joshua! Just wanted to point out that IMO the Tinyhawk2 kit is better than the Tinyhawk kit. Just because of all the flaws the TH (V1) had. Also, I agree: Slightly larger whoops are easier to learn on than a 65mm. Nice video and great review as always!

[@bakerfx4968]

I’d buy it in a heartbeat if it weren’t for the controller/receiver being locked in to their protocol

[@SkyGizmmo]

Comedy relief .... Your reviews are very detailed. Smiles and a giggle

[@scuba-people]

WEll i wish i had seen that review 3 weeks ago.... This is my first fpv, i was super eager and o boy am i disappointed massive mistake for me in buying this drone. You did a great review and i must say i love your chanel i do learn a lot ! One thing you didn't mention and i think really is missing is a usb connector, this is my first drone experience and i really wished i had seen the beta fpv kit the controller does permit usb c-connection and use with a sim. But all this are details they are not what really is at fault here, the bad part is the customer service from gerpc. i did order the 279 4k loris added 30 usd for dhl delivery..... well after a about 10 days of no news i wrote to them, they apologised and told me that my order would get processed... after again not hearing from then i have rewrote to them, turns out i had to add 30 usd more for delivery oooooook at that stage i should have known but i did gave them a benefit of the doubt! so i said you know what i ll buy 6 more batteries i ll use em added another 30 usd for shipping! after being promised al would be sent together i waited... few days door rang i was finally delivered. well turned ot they had only sent the drone the batteries had not be sent.. and out of the 4 batteries i get with the ddrone there was only 3..... yaaaaay. Well despite all this i enjoy learning to control lift off and controlling despite only being able to fly for 4 min.... well it doesn't stop here today broke my first prop only to realise they haven't packed the prop removal tool so now i m stuck with broken prop.... my advise at this stage geprc is incompetent and honestly should have got myself a cheap controller, box and a tiny whoop i probably would have saved quite a bit of money and time and i could grow with my kit where as with this i am stuck ....

[@timebert1132]

Yeah, what all the youtubers forget to mention is the shit quality control and customer service of almost all of the quad manufacturers. They of course dont notice this, as anything sent to them is probably double checked. I received broken items from almost anyone I ordered quad parts to date (BetaFPV, etc..). You build up a tolerance.. I just wish the youtubers would call them out ...

[@bingbing496]

You just take the props off with your hand homie, kits shit tho I agree lmao

[@willpowerfpv3246]

I have both the betafpv kit and the GepRC kit, and I can confirm, they are identical box goggles. Also, the controller is brutal. Also, the receiver is S-fhss, and does not bind to the multi-protocol module in the radio master tx16s. I've since purchased a frsky d8 receiver, so that I can bind it with my proper radio.

[@Tritorpol]

Finally a longer video then those 1-2 mins one. Thanks JB

[@JoshuaBardwell]

My video release schedule has not changed at all. I release four full length videos minimum each week, on Tuesday through Friday; I do 2 Q&A livestreams and 1 news livestream. The shorts are in addition to all that content, not instead of it.

[@Yukeake]

Obviously with the GEPRC-specific FC and transmitter, this kit isn't ideal to recommend as a starter kit that someone could get a good "feel" for flying, and if they want to go further could "grow around" - upgrading components as they go (and as budget allows). IE: Replace the transmitter with a nicer one, then in a few months replace the goggles, then "graduate" to a more powerful quad, etc... Is the Tinyhawk/Tinyhawk 2 RTF kit still the king of that department? It feels like the brushless drone is the standout there. BetaFPV has a better transmitter, Newbeedrone has a more versatile goggle/display (but no diversity), but both of the drones seem somewhat lackluster in comparison.

[@MR-od1bv]

I have that kit, or better said had. Rebuild it with the new Geprc with ELRS on board and run it with a TX12 MK2 and bought the Skyzone Sky04l to replace the goggles. Having alot of fun with it, building and flying.

[@VLena_art]

Maybe the emax tinyhawk II + this caddx camera + betafpv lite radio + eachine ev 800D?

[@Bean-Time]

Josh wtf now I can't finish this video because you're going live

[@lordfarquad1735]

Dude just said exactly what I thought in the first 2 mins

[@panthai272]

No One needs this Controller! Thanks for reviewing!

[@stevedakin8321]

My perfect starter quad was my little mantis85 with flysky i6, cheap enough and got me hooked..👍 now on everything and anything on jumper T16 pro.

[@SidewaysGts]

New to the hobby and your comments about upgrading the goggle antennas caught my interest. Still learning - But, is it worth it to upgrade just the antennas on the goggles? Or do I need to upgrade the antenna on the drone as well? Its amazing how much information there is to sift through and try to understand on just the topic of antennas. Thanks!

[@BlackAndBlueGarage]

This might be what I'm looking for. I need a small quad that I can also mount to my planes so I can fpv anything.

[@Vaeloron]

This is a common headset sold on Amazon. I bought a pair years ago. They were quite comfortable but my Fatshark Tele[porert V3's that were much older were a better experience. The USB connector is difficult to reach and they seem to run at a really low frame rate. I was not a fan of them.

[@GothicIN]

Hi Joshua! I love your videos, and it‘s awsome to train in your garden by liftoff ^^ I am starting fvp now. Just waiting for my tinygo. So I am very happy you made a video about my starter kit. You recommend to change the antenna. But it‘s not clear to me what antenna is fitting to the tinygo 4k. Please post the link to the best antenna on banggood. Regards and stay as you are!

[@2eleven]

www.ebay.co.uk/itm/293842744593 You need an antenna like that

[@tbublz]

Just don't buy from the UK if in the US. No guarantee you'll ever get it.

[@0xPr0xy]

Great review! bought the kit! Can someone recommend good extra batteries? Should I buy additional GEPRC ones (kinda hard to get at the moment) or can I just put in BetaFPV ones - or will they not fit the holder at the bottom? I'm new to this if someone could explain what the difference is for the drone between the C rating, the HV, the 2 x 1S setup compared to 1 x 2s as others have?

[@michaelrubio15]

Any update on this?

[@marcinti9509]

Wow, you are the only one out all these reviewers that did not to bs with us...thanks for a honest review. THIS CRAP USES AN FHSS RECIVER ONLY>>>DON"T BUY IT...no good radio works with it. FHSS is an old protocal that no one else uses other than GEPRC pos radio. By the way, it is very difficult to fly indor. Only outdoor, but it is still hard to fly because it is a S2...to much power for newvies!!!

[@michaelwblade]

That’s what I’m doing I Bought the controller And also your Xilo kit Now to get good on velocidrone is my plan

[@SunriseWaterMedia]

Velocidrone helps so much! Just remember that when you crash in real life, your wallet will shrink. 😄

[@WrongWayFPV]

Practice landing.. your wallet will love you for it 😆

[@diggsit69]

Thanks Joshua I’ll need your help I want to get into FPV flying. I’ve been advised that I should get on the simulator get a cheap transmitter receiver and learn how to fly that way first but that’s not me. I’ve been flying for about 3 years an my first drone was the holy Stone HS 170 great drone to learn how to fly on but nothing with FPV I definitely wanna fly outside to learn so I want a drone that would be I guess plug-and-play very durable so hopefully I wouldn’t be repairing it or maybe not that often hopefully, I want it to have good reception not something where you go around your house or down the street and the reception breaks up and looks like crap so It would have to have good antennas on the drone as well as the goggles an a good controller transmitter? I really like the BNF 4” flyWood freestyle HD drone an the QX7 or TX16S Radiomaster transmitter and maybe DJI goggles would be my top choice I just don’t wanna buy 1000 different parts to get to my end goal of professional equipment so what do you think I know I have to learn FPV first I just don’t want to buy a bunch of stuff that I’m not gonna need or want soon any thoughts?

[@edgararcega3046]

I purchased this like half hour ago. Would have been cool to watch your video first. Love KZbinrs that both criticize and bring out the good in a product. Even after I would still purchase it bit now i know all the cons to expect when I get it

[@rubenmusalphatrollwurger4367]

The goggle is the same from BetaFpV the VR01 and it is not working for people they are faresight then you have to cut the goggle behind the lense and extend the goggle housing for about 5cm. That has worked for me. And last but not least the Receiver inside the goggle is scrap (it is only one modul with two antennas), but you can desolder it and solder three wire + - and signal for conect an other Receiver Modul with higher sensitivity. If you like Box Goggles and if you have no problem with faresight eyes then it is a good base for build a very nice FPV Google by update the Receiver with a AKK oder TBS Fusion. With he build in Receiver its scrap

[@solo8820]

This is a great starter kit. Over all with the RTF components are they the best? No. but together they are better then the competition s packages. Out of the box the video rivals Fat Shark scout googles. Remember Josh is a pro, he’s honest “an OK learner ,ok cruiser”. Sure if your a 5” ripper this looks like trash but to a 100% noob you might be buying something not upgradable but that will get you in FPV at a reasonable price and if you can afford the 4 k then why not? I love mine. I added antenna upgrades to quad and googles very impressed on range. Way more then you need for a micro quad.

[@jpbegin02]

hi there. forgive me to ask but what type of antenna did you use ? thanks in advance

[@thepsyler]

If anyone could help me out here: I'm looking forward to buy the kit, but as far as I see the controller is not the same as JB's . Let me share the specs: Remote Controller TinyRadio GR8 Remote Controller Radio Frequency: 2.4GHz Radio Protocol: FHSS Channel: 8 Transmit Power: < 20 dBm Antenna interface:SMA Low Voltage alarm:

[@thepsyler]

@@_tim___4234 Thank you Tim. in the meantime I got myself a mobula6 and a jumper t lite, so, I'm covered for practice :) Cheers

[@robertv1273]

I also like to think of it as its going to give you a feel for the hobby at a good price and give you some experience and knowlege without a risk of chopping a finger off, its like getting a bb gun before getting a 22. Nice video no jello that I could see and looked pretty clean.

[@joebabcock3464]

Takeaway: “this kit is garbage...but you can buy it using the link in the description if you like garbage for some reason.”

[@joebabcock3464]

@@nikolasg3111 I was just summing up the takeaways from this video. Mine hasn’t shipped yet so I don’t like or dislike it at this point.

[@joebabcock3464]

@@nikolasg3111 if you have one and it suits your purposes, great! If you don’t have one but you like the concept and think it was well executed, great! Mr. Bardwell doesn’t seem to share your optimistic appraisal in his review and I merely pointed that fact out. Again, I don’t like or dislike the kit at this point.

[@natebarts3226]

@@joebabcock3464 what do you suggest then? Im also interested in getting this one

[@joebabcock3464]

@@natebarts3226 I’ll update once mine arrives if you like. To me it has some interesting features for an all in one kit but has very limited capacity for growth.

[@natebarts3226]

@@joebabcock3464 i dont have an experience in flying an fpv drone yet. I have a dji mavic mini though

[@subwiser]

Any plans on testing the GEPRC Thinking P16? Sounds pretty promising and I cant really find any in depth reviews. Would love to see some content from you! :)

[@mateuspab]

You are the one from the SIM, lol, more bold in the SIM, but thanks for the tutorial ;)... even the SIM is tricky

[@BlueADV214]

I got this kit because I’m a newbie, I soldered in an ELRS receiver and fly it with a TX16S. I adjusted some settings in Beta Flight for my specific likes, and for the price, I’m content. HOWEVER, since I’m still technically a newb, is there some antennas you would recommend for the box goggles to improve them until I can get a little deeper in debt?

[@campinggroup7218]

A couple questions Do you need an sd card to record the footage from the drone and if so is it a normal sd card or a micro one Where is the sd card holder on the drone

[@s.boulware73]

Yes. You need a micro SD card inside the drone to record footage in 4k. You can put a microsd card inside the goggles to record the goggle footage. The sd card slot on the drone is on the the board under the roof. Turn quad upside down and look closely at the bottom of the board under the top canopy and you will find a slot almost hidden. You will need tweezers to get the card in and out

[@cessnafsx123]

From the looks of it, those goggles are completely identical to my beta fpv ones apart from the head strap. Good Goggle’s except for the battery doesn’t last too long per charge

[@CJ1KFPV]

Wow... drone camps hyped this up looked good i order it, a month goes by its still not here, probably lost in shipping, and now u give me the honest review and im like. I got baited..

[@ernest_4104]

OMG, i feel so sad for u. Honestly, i'm scared of these kind of situations. 😧 Stay safe! 💪

[@medrone7097]

Overseas shipping is very slow right now. You will have a ton of fun with this kit, or if you see something you like better sell it on EBay. The best quad is the one that you have to fly right now!

[@ernest_4104]

I mean, i'm scared of buying drone that is complete piece of shit...

[@JP-qq2kn]

Your supposed to watch all the real reviewers FIRST (Joshua, Andyrc, Drone mesh, etc.) To see if its actually good. Then AFTER you buy it, you watch "Drone camps or Uavfutures to hype yourself up about what you just bought.. lol Never watch uavfutures or drone camps rc for the actual reviews.

[@ernest_4104]

@@JP-qq2kn yeah, i learned that:) - grumpy trev, how do u like it? -oh, it's defintely the best one out there! And that happens again and again😂

[@thetacticalape8852]

I just got mine yesterday. The controller is pretty crappy. I found it nearly impossible to fly indoors - too difficult to modulate throttle it is either climbing or descending. This is likely a product of the controller which just doesn't seem very responsive. Hell, I have flown plenty of cheap toy grade drones inside and can usully hover with them. I will end up getting a new transmitter and receiver now and some nicer goggles later...

[@curbie1150]

GepRC has some great drones, if you got the TINYGO bundle, would the transmitter work with any or "all" GepRC better drones, like the Cinelog or CineEye

[@Revelation1177]

Any updates on this I'm curious my self

[@YoungJasQ]

I'm also curious

[@andrewdecavia7553]

Can you do a video in 2021 recommending best starter stuff to buy? Sounds like most kits only one item stands out as being worth it. Looking for my kids first FPV but would like a quad that's easy to start with and durable/reliable plus googles/remote. On the fence on this, tinyhawk and the cinelog 25 for that reason after seeing your videos. Also curious about that atomrc dodo!

[@JoshuaBardwell]

Please check my web site www.fpvknowitall.com

[@ifiggy]

I purchased this GEPRC Tiny Go 4K packed from factory with 3 propellers and defective flight controller. Sent them the defective drone back to them. They have a really bad customer service. They keep saying that they will send a new drone, for 2 weeks. Still waiting for them.

[@jameszimmerman7199]

So this was all on the 4k version. How does the 1080 P hold up? I don’t need crystal clear picture recording I just want to be able to look at it later or use it to help me find where I lost it

[@ItsJustRyansChannel]

Ok, hard truth time from someone JUST bought one of these RTF kits. If anyone wants me to reply to them you need to like this comment for me to see it. I don't get reply notifications on YT. Anyway, I just bought one these EXACT same kits from Pyrodrone and received it yesterday (9/28/22). I know this video is a year+ old, but for me I did NOT receive what was shown in the video. I received a totally different controller/remote that required me to go out and buy TWO 18650 batteries and a charger for them. And even though the batteries are rechargeable and the remote has a USB-C port on top of it (unlike the one in this video) it gives no indication that's it's charging the batteries. So that's stupid ass thing #1. #2: Do NOT, for one second, believe that these things are capable of being flown inside your house/apartment. The people demo'ing these things in these videos have experience, whether they say they're new to the hobby or not. If you have ZERO experience, I can almost guarantee you will be breaking shit in your house, or maybe even the drone itself. Maybe I just got a BAD controller or something, but despite my 40+ attempts just to fly this fucking thing by LINE OF SIGHT in my kitchen, I can NOT get it to stabilize. The SLIGHTEST touch of the "throttle" gimble will have this thing blasting up in to your ceiling, then crashing. I've tried ALL the modes: AIR, HOR, ANGL. They all frickin' suck. Something is definitely OFF, and yea it MAY be me, but I can't even fly this thing from one room to another without it violently crashing in to shit. #3: I received a different battery charger than what's shown too. It LOOKS like an upgrade, but it sucks. It gives no indication as to whether or not the batteries are fully charged. Thankfully I bought a different $22 charger from Pyrodrone that actually works and indicates when the batteries are charged. #4: 90% of everything else they show in this vid came with the drone package. Even the drone looks to be the same. #5: When I DO wear the goggles I keep seeing shit pop up saying low battery, or a low battery bar in the upper right corner, DESPITE me charging these things all night. I have now idea what it's indicating has low battery??!!?? The drone? The goggles? However, I stick by warning that this thing, for whatever reason, and despite what you see on this video with these EXPERIENCED drone pilots flying them, this kit is NOT easy to fly. In fact, it feels SO hard to fly that I'm almost convinced I received a defective drone, remote, or something. And I don't even want to take it outside. Even though I'd have more space to practice, this thing would fly away and be gone in a damn second. I can't even get it to HOVER appropriately via line of sight as it's right in front of me. It's BS. I thought this was a product marketed to people like me who want to get in to this hobby, but it's just a SLIGHTLY more advanced "kids toy" it feels like. All I'm saying is, be cautious. I'm going to keep trying for another day or so, but my opinion of these entry -level kits is pretty low right now and I'm already looking in to returning the damn thing. It's not FUN if you can't figure out how to fly it out around your own kitchen or something. How is my son supposed to use something like this if I can't even do it? So yea, just my advice and opinion. Take it as you will.

[@arthurtorricer4544]

Received my Tinygo 4k yesterday 5.11.21 . They didn't send me antennas.. power cord or video cord. The Box goggles are stuck on blue AV screen. and the camera now doesn't work or send signal to the box goggles. Waited a month and slightly disappointed. I hope Geprc can help fix this problem with some great customer service. Guess I'll have to just purchase some upgraded Antennas. It arrived pretty fast I guess , me being in Hawaii we get everything late.

[@homeofcreation]

What is the best way to get out of FPV?

[@thetubemeister82]

😂 Can’t be done.

[@SlipperyFPV]

Give all your gear to me 🤷🏻‍♂️😂

[@TechReview2000]

Keep up the great content! Learning a lot!

[@scu-dub]

Out of all the bundles I'm just starting fpv and have researched four others I was going to get this bundle bit now I'm not!!!!!! I'm going eachine tyro or arris 780......and get my own gogs......thanks jb because I was gonna get this but I would rather have a rippin quad I don't give a shit about video footage.....👍✌almost forgot the tiny trainer and transtech Beetle and diatone Roma and turbobee.....and yes. The do do.......so I have a few sub250 quads to look at and I can't wait to make my purchase⚡✌thanks to you and Justin Davis I would still be making paper planes.....lol stay safe guys ✌jb you are my Yoda!!!!!!!😁

[@illuminati2949]

the google i think is from the tiny hawk 2 freestyle rtf kit

[@ronh129]

2 questions, has your transmitter yanked the negative off the throttle gimbal yet? On my 9th flight it happened to me.. I fixed it but I also got a TX16S. So, second question, can you bind this thing to a TX16S?

[@rayv882]

I was thinking about buying this quad or the Eachine& ATOMRC Seagull, which one do you recommend of the two?

[@pauljaeger3775]

Your video totally talked me out of buying this product.

[@Youdrone314]

How do you start video recording on the tinygo 4k

[@HotboiEngineering]

Man that 4K footage looks good but it has a lot of distortion.

[@TheSiliconeslick]

Using a simulator is the best and cheapest way to get into flying quads and planes. You'll crash less and you won't be buying replacement parts as much.

[@petersonfake4917]

anything better than this kit , more future proof. maybe bigger for outdoor but also indoot .for a beginner that only flies dji

[@2eleven]

So I've crashed mine into a puddle and the video signal is no more (still control the drone but only getting OSD in the goggles). I'm looking to get the ProTek25 which comes without receiver. Can I take the receiver off the TinyGo and attach it to the ProTek and use the controller and goggles with that drone instead? I just don't want to have to fork out for a new controller and goggles as well as a new drone right now.

[@haroldseaman4243]

Geeze I started flying drones a few years ago I started with drone from Target that's had three models starter, moderate and camera drone... Fley the heck out of it so I moved up to the DJI phantom 4 pro V2!!! I've been told camera drones give you bad hibits and the learning cure is tremendous... That being said... Gep,Cetus,beta,tinyhawk and probably more I haven't seen yet lol!!! Is there a rtf kits that lets you improve the equipment as you learn with out switch to a different brand? Any help on making a good a choice would be great!!!

[@Jayveer_Gadhavi]

Can I use the controller and goggles with other geprc drone's like cinelog 20 ??

[@MRjctizer]

I got both plastic part to hold the battery wich are broken, just tried to glue it... Still think that it will not solve the problem. I don't know if i can have any other solution to hold the batteries in case this doesn't work... Just entered FPV since less than 48h... Hope to have help from the community

[@michaelbryant3643]

So what’s a better beginner drone for outdoor

[@v-blitz]

What is the Tinygo top speed ? An idea ? Thanks !

[@50geo50]

You should check out the eachine novice II V2, i've bought it, and the drone is amazing, and it's pretty good price wise for an all in one kit i got it for about 140$ on sale (but maybe the googles could be better)

[@vernelfpv]

the goggle is the DMKR 008 Pro

[@cooldowncp]

always love your ending haha :)

[@acidriott]

If you could only buy one rtf kit would this be it?

[@mattalford3932]

And its not my first drone lol. I have the meteor65 pro, 75pro, the tinyhawk freestyle 2, the 6s hawk pro, the radiomaster tx16s mk2, and 2 camera drones. I bought this because it records in 4k. Basically a cheap ciniwhoop. Im going to buy the camera system for my freestyle 2 if itll work lol.

[@mikeodell5915]

I really want to start with FPV drone hobby.....but would rather start with a set up that allows real growth...any suggestions would be greatly appreciated

[@gliebig100]

Could you post a link to the upgrade antennas please?

[@attackdrone2]

I got mine 2 weeks ago i have been waiting for you to do a video on it ...and there are 3 version but its exactly like the normal analog but with led lights .... I love love love mine even if i crashed mine and the camera and the canopy exploded 100% my fault and its hella fast

[@davidsol1346]

How long did it take for yours to arrive after u ordered it?

[@mervingjslax]

I’ve got one on preorder direct from geprc. Can’t bloody wait. Can you please advise me on upgrading the goggles antenna. Thanks

[@jerryflames2937]

damn you won't get it till like the end of april

[@mervingjslax]

@@jerryflames2937 website says shipping from 15th feb. 🤷‍♂️ I guess we will see.

[@PowderHen]

Does the radio have USB and work with PC/liftoff/Sims etc? That's why I got the betaFPV, so I can use the radio with liftoff before I graduate to the "real thing". Strikes me as a big beginner selling point. Being also able to learn on a sim with a real radio.

[@focusonchrist6752]

I really enjoy this one. I'm intimidated to get into fpv, but would love to start with something as this one. What would you recommend for the realm of $300 for rtf?

[@Kazuki2122]

Do you think I could upgrade the receiver to FrSky R-XSR and use the tinygo with tx16s?

[@Leakyfpv]

How do you get it to record in the slot on the drone ? My goggles will record but not getting a recording when using the slot on the drone ?

[@jakubkorbecki1442]

Can I use there goggles and controller outside of this kit with other drones?

[@Monkey_D_Cluffy]

Is there any tinywhoop aside this one that has 4K that uses frsky? And maybe has a more go than this one? I like this drone but the lack of being able to use a better rc kinda sucks.

[@dimitarkolev9173]

Almost 200k subscribers!

[@jakobbeavin3435]

Honest review loved it

[@wendellluciano]

Hi. which antenna can I put on the goggles to improve fpv reception? send a link. thanks

[@nickjones4785]

Hey guys. I have been flying my Tinygo for about 9 months. I have the 4k version. Love it. I have even upgraded to a better receiver so I can fly it using my TX16S. I have a question about the SD card port in the drone. Although I have put a 32 gb sd card in the drone, it is not recording to the SD card. I can get my goggles to record, but not on the drone's SD card. Does anyone have any suggestions on what to try to get the drone's DVR to record?

[@Ορέστηςωνσταντινίδης]

This or emax tinyhawk 2 rtf?

[@randomnetwork1995]

I think I may go with this kit after watching a few videos about these small rtf kits

[@johnstonlarry]

Nice landing

[@jamesstackel]

i like how at about 5:20. you say it's not going to be fast it's more for cruising, i got one recently, it came with the v2 GR8 controller, but damn it's got some speed, i was doing at least 100kph the other day

[@michaelrubio15]

Can you make this quad 1s? how do you change the charging pins/ rewire? Any risks to doing this?

[@JasonEllingsworth]

Is there any way I can buy this from you? Out of stock everywhere and I am convinced this is the kit to buy for me to get started :/

[@alien-oo-_-oo5732]

Is it possible to see fpv on a phone with this drone?

[@dude10761]

I’m looking at getting this ASAP, is the extra cash worth the 4K

[@willpowerfpv3246]

The recording is nice and clear and colourful, But the lens has a dome over it, giving it a fisheye effect. 😒

[@JP-qq2kn]

Nope.. get the betafpv lite radio 2 se. Eachine ev800d goggles and the mobula6 hd tiny whoop.

[@Thunder208]

Which drone simulator is best for beginners

[@dan71559]

Hi do I re bind? Also how do I bind a second to a transformer?

[@soldier7813]

Hey thanks for your realistic review, no bullshit come with.

[@cfelix0708]

Hey JB can you give me an example of some more quads I can pair with this GR8 Controller. I have the tinygo and was looking for another quad I can pair with my controller a little bigger one maybe a 3-5 inch quad. Thx Chris.

[@pcka12]

What sort of quality is the 4k on board recording?