✅ How to make a micro RC balsa wood airplane / glider

[@zoasis7805]

Dam, you ran to that plane fast! You should try out for the Olympics.

[@Vastasoceans7532]

Hey, do you have a new link for the motors? The link doesn't work anymore

[@finiscary9689]

Very nice video, the way you worked out the flying of the plane is great!

[@Joyplanes]

Thanks mate!

[@PrabhatKumar-zh5cf]

Nice work bro

[@gaba2130]

You didnt used ESC?

[@Joyplanes]

No, in this one the motor is directly connected to the battery.

[@whitebeltforlife]

how do we power the motors? Do we need an ESC? Does the motor just go straight in the receiver? Thanks Bro !

[@WornUp]

He hard wired the lil motor to be powered directly from the battery...😐

[@kidalainababy5337]

The plane was very smooth

[@cosmorito961]

Can I use a foam board?

[@Ozumbilk]

Which model motor did you use?

[@ahmedomer7496]

Nice video

[@gustavsozolins422]

Hey! can i use a 3.7v battery to power two 4.9v servos? Pleeeaaase respond!!!!!!!

[@ayoubsoussi2015]

You will need a boost/ voltage amplifier to convert your 3.7v to 5v

[@pauls5745]

I think a 2 blade prop would be better than those quad props. lighter and use less of your battery. maybe a 3" (75mm)?

[@Joyplanes]

Yes, but I only had those at the moment.

[@sufysprojects2689]

you can lock the thread used for the tail control surfaces to the servo , rolling them under the servo screw used to fix the servo arm to the servo gears

[@deepnagare2321]

How is the electronic have installed with receiver.

[@anthonylong601]

very cool.

[@alexjackson1563]

Quick question? With the batterys i belive there 2 cell? To they fit into the receiver??? Or will i have to solder diffrent ends onto the battery? And what will i need to solder?-Thanks

[@Joyplanes]

Alexander Jackson the battery is a single cell (4.2v) just connect the battery into the receiver any way you want.

[@alexjackson1563]

Joyplanes Alright thank you!!As im going to buy all the parts and make a glider and maybe stick a motor on the front after, but im planning it to be launched by a rubber band

[@Joyplanes]

Alexander Jackson Good luck with your project!

[@alexjackson1563]

Joyplanes Thanks this video really helped!!!

[@MilanKarakas]

WOW, I had the same problem with crashing balsa glider onto metal objects. Not motor powered, but very similar situation.

[@Andrei92ify]

let me understand, the motor is conected directly to the battery right?

[@Joyplanes]

Yes, I didn't have a micro brushed speed controller.

[@alexyt4434]

So you don't have control of the Throttle at the moment?

[@Joyplanes]

No, I'm working on it with some circuits and also triying to program micro chips to do so.

[@prashantladhake7647]

Good plane

[@ArchiCoptersMultirotors]

Very interesting video! One of the things I want to do is a micro plane with fpv! If works I will do a video for sure! :D

[@Joyplanes]

Thanks man! puedes ver mi canal en español también "joyplanes rc" ya he visto algunos de tus videos.

[@rajmir3160]

How did you connect the DC motor to the receiver

[@Joyplanes]

It wasn't . I connected it directly to the battery in every launch. I could not control the speed.

[@brendonholt746]

how did you wire up the motor to the receiver???

[@Joyplanes]

The motor was connected directly to the battery by hand.

[@stmvlogsshreetechmasalavlo6667]

nice.

[@Indonesia01ian]

hi sir I realy want to know, do we can use that motor? because I see in another video,they use biger motor even their plane smaler than yours and what was the compensation if we use this motor, and how long do we can go with this combination, i am realy a beginer, and i want to know more about this motor, because if i use bigger want it double the cost that I spend,thank you sir

[@Joyplanes]

You can use this motor and you can connect it to the battery directly or you can use a brushed ESC to control it from you RC. This motor's life is shorter than the brushless ones but it is smaller and cheaper.

[@AngryHybridApe]

Yeah, flying a plane without controls does have its disadvantages.

[@dr20231may]

im inspired :D

[@JABIR_TV01]

Bro can you make a hand throw glider plane into rc

[@AngryHybridApe]

How big of a plane are you talking about? I ask because I motorize paper airplanes using micro drone parts. If its over 2ft wingspan, I dont think I could help. But an 18 inch wingspan would probably work great.

[@JABIR_TV01]

@@AngryHybridApe yeh more like 33 inch wingspan

[@AngryHybridApe]

@@JABIR_TV01 Maybe use the guts out of a larger drone?

[@AngryHybridApe]

@@JABIR_TV01 kzbin.info/www/bejne/fYSnf5qkna9gfK8

[@Angelum_Band]

Let's also mount a parachute on top of the wing for a good vortex generator? Lol!

[@Tommyboytomsters]

Nice

[@vladimir1982b]

Nice video! Can you please advise, do I need ESC or motor connects directly to receiver? Please advise? Thank you

[@Joyplanes]

In this video I was connecting the motor directly to the battery because I couldn't put a micro ESC, in a future video I'll try to make a micro esc to use it with it.

[@MCsCreations]

Joyplanes Try using the board from a 9g servo as an esc. You just need to put two 2.2kohm (if I'm not mistaken) in the wires go to the servo's pot.

[@joewoodchuck3824]

It's a nice airplane but it's NOT a glider. Gliders and sailplane don't have motors.

[@Joyplanes]

You are 100% correct but actually it's a hybrid because it can glide without a motor.

[@nsquaremusic9]

bro....nice...plz....give me one rc plane... ..that u made......

[@Joyplanes]

You can make it yourself!

[@via403]

that reply was technically a big fark off.... ahahahahah

[@ghoce0buy]

GOOD

[@tincyattummel4111]

Hi

[@ilcoloreelospettacolo4472]

così si è.

[@kevingrainger2530]

Well done, loose the music, carn't hear you with my hearing aid due to the bloody music. So frustrating. Perhaps next time my friend. Kevin

[@Joyplanes]

Sorry to hear that, this is an old video, the new ones have better sound levels (low in the music). Cheers.

[@starrstewart7083]

This and similar plans can be found on the Stodoys website.

[@sikosis999]

balance your audio and turn down that noise you call music, we're here for the specifics and processes not that ear rape

[@jaydenbrumous2582]

with plans from the Stodoys, doing something like that was a pleasure.