Thrown Rod!! Parked Since The 50's Will It Start?

[@Sleeperdude]

Go to buyraycon.com/sleeperdude for 15% off your order, plus free shipping! Brought to you by Raycon.

[@Grant-H2O]

They wanted my Email to "lock in" the 15%... So i entered it and then right after a new pop up that says "Enter your phone number to "lock in" 15% off.

[@brianmartin7964]

I know that Raycon helps support this channel, but I think people should know how invasive their web site is. I I clicked on the purchase now now button and their web site had all my info populated in it including my credit card number and email and home address. This kind of freaks me out. Also they charge you extra for everything including the charger. Sorry Josh, I hope you look for better sponsors than this.

[@gregorybarth930]

That's TMI :(

[@peterschepman5492]

It's cool to see how things were made

[@gerry-p9x]

Fix it up and kids can goto. The prom in ot

[@MrCorynick]

As a Model T guy this was a bit cringey to watch but you're doing ok. As long as you have at least 30psi of compression you should be fine. Double check your firing order 1-2-4-3 with 1 being at the front. The position of the plug wires really doesn't matter as long as they are fired in the right order from the commutator. The other thing I'd go for is to dig into the carburetor again, there are some hidden passages that tend to be plugged. Also note that it will not run well or at all unless your spray needle adjustment is set perfectly, it will take some trial and error to find the sweet spot and it shouldn't need much adjustment if any after that. Start at one turn or so and go from there. Adjust it slowly in small increments. Also check for a good seal on the intake manifold gasket. Good luck! Model T's are fun cars

[@Kiwifella]

Not cringey at all

[@jeffschreier8607]

For not having much, if any, prior experience with Model Ts, Josh did pretty good. But I agree, as a Model T guy, I found myself yelling at the screen with what I would have done.

[@Kiwifella]

@@jeffschreier8607 everyone starts somewhere… it’s how you get experience

[@stomper2582]

Watching him go through this without even having a maintenance manual is the crux of the show altogether. If he had have already known everything about this particular car and there was no puzzle to solve it would have been pretty boring. This way the kids get to learn problem solving methods as they work through to the final conclusion of the start of the engine. The dude is smart enough to figure the engine out even though he’s never worked on one before. 😮

[@Hoa-Mechanical]

That’s great❤❤❤❤

I truly think you are experiencing coil problems.Each one of those coils have an internal tinfoil type capacitor which have a very high chance of being shot. I recommend checking the ohms to be sure. I have a ECCT tester and noticed some old coils can spark/buzz but do not throw a constant spark to the plugs thus indicating an internal coil problem. My Model T blew several capacitors in rebuilt coils which caused similar issues you are experiencing. Also your compression is fine. Lastly, grease the outer roller bearing in the rear axel! There should be grease cups by the end of the springs but ideally you should pull them out to clean and repack them with grease.

[@Hoa-Mechanical]

😜😜😜😜😜😜

[@wanderingweederspapa7878]

Every kids needs this in there life... uncle showed me body work when I was 6...now 58 and now have my own restoration shop... great video

[@Sleeperdude]

That’s great

[@gerry-p9x]

​@@Sleeperdudeadd seatbelts

[@JB-de5cp]

You start it with timing lever up as soon as she fires you quickly pull lever down, from a 1926 owner!

[@Hoa-Mechanical]

❤❤❤❤❤❤

[@johnbrooks9107]

My dad was a Master Ford mechanic in the 30’s - 60’s. I am thinking about him while watching this video. Blessings from Texas.

[@JohnBradley-ut2qi]

Just to let you know, I had an uncle that actually owned a Model T. It was a daily driver. He rebuilt many of those engines. You are right, they are poured, then they measured the crankshaft and filed the Babbit down to close to the right size. Put the pistons and rods back in and tightened the caps. If the engine turned over and the rods didn't move, they considered it good, put it back together and ran it until it started knocking and then did it over again. I am 85 years old and a retired auto mechanic and teacher of auto mechanics.

[@lewisfaught223]

Your 3 kids are destined to grow into 100% capable and fearless adults. If they retain HALF the knowledge you have shared with them, they will still be leaps and bounds ahead of most.

[@Sleeperdude]

I hope so

[@ВсякаяВсячина-с5ч]

@@Sleeperdude эт детство мечты просто,жаль что у меня не было такого отца,у меня вообще не было отца)

[@Hoa-Mechanical]

👍👍👍👍👍👍

[@kingninja4977]

​@@ВсякаяВсячина-с5ч Мне жаль, что твоего отца не было рядом с тобой.

[@richardsmith-qy6vl]

I agree those kids are 1 in a million ive never heard one of them complain and wha what jumps right in and gets it done she's not worried about getting dirty reminds me alot of my first wife when I had my body shop she would do what ever I asked her. And ralfie has so pretty good skills and really gets into it. He does really good with that flux core welder and beleave me it's not as easy to weld with flux core compared to a mig with gas.

[@terrystroop6012]

If nobody has mentioned it. Merlin’s Old School Garage on KZbin does quite a bit of work on these old fords. He has a wealth of knowledge.

[@perryelyod4870]

Coldwarmotors also has refurbished one of these, but that channel may not be as family friendly as this one.

[@laman491]

Yes - I mentioned it before i saw your comment. I've messaged Merlin on fb

[@kevbev1524]

Merlin is wicked cool guy, He drove one from Ohio to wherever he lives in Arizona or Utah? I'm sure someone will know. All I know is he lives somewhere warm.❤

[@jimhickey2276]

We have a 27 touring we picked up a couple years ago. They're loads of fun! They make a great alternative to running around in a golf cart or side by side, way cheaper too! Seems like more folks are discovering Ts and how useful they are especially if you have some property.

[@curtpascoe2433]

Merlin bought a whole garage full of model A and T parts. Some new, never used parts. And he's got experience building those engines, and assembling from scratch.

[@DynamicNewAdventures]

Your daughter cracks me up. “When are you gonna get something new” 😂

[@tomayres4237]

New takes lots of $$$$$$$

[@ryandavis2580]

Squeeze is so much fun. Lol

[@gerry-p9x]

23. SKIDDOO 😊😊😊

[@1112223333111]

no way nothing new will last as long as that ford

[@GratefulEd907]

She said “ I like that you like it” 😂😂😂

[@lookslikeit1151]

I just came across your page and I am impressed with how well your children are educated in automotive mechanics at their young age. You have taught them some great work ethic that will last them their whole lives. You are a man who blessed with a great family. Now as for the car, awesome buy great family project which I am sure is one of many past and future. Here is something for future reference, when it comes to mounting and dismounting tires like these, use a vise grip on the rim to hold the tire in place as you are seating the bead, that way no one needs to hold it down putting their fingers in danger of getting squished or worst cut-off, that would suck. Great job, great family, great dad. Take care and Keep the Faith.

[@billroberts3864]

Your vehicle projects are building great memories for your kids who will look back years from now and talk about the things they learned and the fun they had working on these old vehicles. Blessings to you all.

[@mattjohnson7316]

That old car deserves the love of this family! Perfect fit.

[@oscartheg6674]

😊😊😊😊😊 smiles all day I agree.

[@theodoredugranrut8201]

We will see if it's a keeper,

[@gerry-p9x]

Survived the scrap drive WWII

[@gymshoe8862]

I bet 5 bucks its still firing order!

[@gerry-p9x]

@@gymshoe8862 wood be a possibility or bad coils pack

[@thedr4549]

Josh, you may need to try a simple Model T timing gage that correctly sets the timing rod location at the commutater. This will change the spark timing, AND you'll probably end up bending the spark advance rod (which you already started to bend) to the correct setting. Also check the inside of the commutater to verify the contacts are clean. Should start right up! Love your channel, THE BEST ON KZbin!

[@Sleeperdude]

Thank you

[@JoshJackson13]

Sux they don read the comments like they use too. They said they hired someone to reply to us.

[@danielktdoranie]

@@JoshJackson13what are you even talking about? Stop making up lies

[@JoshJackson13]

@@danielktdoranie they said it in a mail video

[@Hoa-Mechanical]

😍😍😍😍😍😍

[@DwaineJr.-tq3se]

FYI My level of respect for solid parents & respectful kids.... Off the charts, thx mom & dad.

[@Air_Devil_Leader_One]

I find it amazing that the girl with the I love WAWA shirt gets her hands right into the work done here on this great video. I know real people from this area of our great country and find them so lovely, kind, and great. They are not afraid to get their hands dirty and do great work helping the nice guy running this project. You are a great family I am assuming working together with a peaceful attitude, good cooperation, and everyone pitches in so well to get this car running again. I love people as this and I did the same thing when I was younger as well. People like you all make this life so beautiful and lovely while still looking nice using good language & are so great at working together. Love to all. I moved to Florida as I got tired of the cold but really enjoy every second of this wonderful well shot video. God Bless and keep all of you safe and well, Love Ray C in FL!!!

[@Sleeperdude]

Thank you so no much! She is a hard worker

[@Maxine-pr6em]

A girl from Canada 🇨🇦 likes how you have your children helping you work on the car . Thank you for your service. I know I'm in Canada 🇨🇦 but I still say Thank you . I have respect for anyone who served . My dad was a cook for the navy and my brother was in the army .

[@JDBQueen]

The thing I noticed was that all your coils sounded different. You showed us in the video you checked one plug was firing. Just make sure all of them are. Just because the coils are buzzing doesn't mean the plugs are. I have a 1923 touring car and 1926 TT. Made me smile you had a Model T video. Keep them coming Sleeperdude!

[@Polecat54941]

This is how you make America great again.

[@Sleeperdude]

Thank you

[@stevenrichardson6793]

America is already great! We just need some great leaders on both sides!!!!

[@robertyoung8289]

That and TRUMP.

[@JuricksEnterprise]

@@stevenrichardson6793 Nice rose colored glasses there hot shot!!

[@timothyleake8750]

@@robertyoung8289 Oh Great...another member of the CULT!!!

[@robertvance1873]

WaWa is getting so good at playing piano 🎹 good for you little lady.

[@Sleeperdude]

For sure

[@larryalexander4833]

Very talented

[@Ecosse57]

@@Sleeperdude i'm genuinely impressed! well done.

[@Hoa-Mechanical]

👍👍👍👍

[@jamesmasters7957]

just found your channel today, don't normally watch the 2hr type videos but i was captivated from the start. Not only are you helping keep these old motors alive but showing the process too, keeping the old skills alive!!! As for you and your good lady's parenting, well, I'm 57 and wish you were MY parents. Trust me, you're doing it right and don't let anyone tell you different. You will end up with such well rounded, intelligent, caring,loving young adults that will achieve great things. Thank you for sharing these times with us.

[@Sleeperdude]

Thank you we try. We appreciate you watching

[@kr8219]

Squeezee is something else. "I like that you like it." Sweet kid.

[@2koolchris291]

Beautiful car and I’ve got great news, my dad is coming home from the rehab place Tuesday, he had a really good recovery from the stroke he had, it mainly affected his mind, made him a little forgetful and he has a little trouble speaking, he knows what he’s trying to say but he’s struggling a little bit, but I’m so glad he’s coming home, thank you all who kept him in your prayers

[@Sleeperdude]

That’s great!

[@stevehilliard1495]

I would think Sleeperdude viewers were good to offer prayers if asked to 🤠

[@Hoa-Mechanical]

😁😁😁😁😁😁

[@trevorcozens1677]

I remember my Grandfather saying something about Model t Fords. He said that if you went over a big pothole the steering would turn inside out and work opposite. He worked for the Ford dealer in Westport New Zealand. when he was a young man.

[@milthopper6780]

As a teenager my father owned a small fleet of model T pickups that he used in his earth moving business. Every weekend he was pouring new rod bearings and every other week end he would pour main bearings. He kept records on his trucks. In 5 years they accumulated over 300,000 miles each.

[@Sleeperdude]

That’s so cool

[@todddenio3200]

That is amazing. Most Model T's were severely worn out by 30,000 miles.

[@shebrightmechanics4033]

​@@todddenio3200 engines wore out but the rest lasted because they were built for junk roads and roads improved and they lasted

[@Hoa-Mechanical]

❤❤❤❤❤❤

[@RobMartens-gb3wx]

I look forward to your videos every week. I am a certified car nut since I was born. I like r your stuff so much I introduced my 84 year old mother who can barely move to your channel and after a couple of days she phoned my and said she found a new favorite channel. She was impressed by the family dynamics and even if she liked racing in her youth it was the family values that she loved. Since a recent another stay in hospital and rehab brought further complications to her memory and mobility I know if she remembers all that I try to spend as much time with her because it's agreed by the others of her immediate family that we may not have her much longer I appreciate how the time she spent watching your stuff made her happy. I personally want to thank you for that besides the fact I would love to do what you do with my family but my health is declining as well. You are blessed and may your God be with you all forever 🙏

[@edrogers6559]

Best restoration video I've seen. You guys were fun to watch. Love how you are all involved.

[@RickyG_PT]

You (the entire family) are too good to us all, thank you for putting out such easy-to-watch, safe, clean educational entertainment.

[@Hoa-Mechanical]

👍👍👍👍That’s great

[@Iseerightthruyou]

When I was a kid, we had a neighbor that had a 1928 Model A Roadster, I believe. He used to take all of us neighborhood kids for rides and we would sit in the rumble seat in the back, and we thought we were on top of the world. He was such an awesome guy, and always so patient with us kids, and always more than happy to cruise around the neighborhood giving us rides. Great video guys, and an awesome car.

[@kenhouse9240]

Check out Merlins Old School Garage. He has several T's. Ralphie would like to see his T converted to run on the old railway tracks.

[@geralderdek282]

Guys like him make memories that last a life time!😊

[@andrewdrummond7351]

I have a 29 roadster. Love it

[@Hoa-Mechanical]

👍👍👍👍👍👍

[@TheRobertReimer]

I love Squeezy's absolute honesty ("I love that you love it")!

[@Sleeperdude]

Yes!

[@plywoodpalaceToddTouchberry]

Sounds like our middle girl

[@caseyspeer8179]

It's always good to see your dad helping out

[@KarlGillcrist]

So when Squeezy said"I love that you love it " is that a new way of saying "Ah bless your heart" LOL that girl cracks me up ....great video as always ...keep up the good work putting out awesome family content...Karl from eastern Canada👍👍👍❤❤❤

[@Sleeperdude]

I think you are right

[@OfficialApedog]

I have always loved this family working together and seeing the smiles on their faces, so Wholesome !

[@Sleeperdude]

Thank you

[@Hoa-Mechanical]

😍😍😍😍

[@inasnap7133]

My 2 cent's , plugs out , one cylinder at a time , bring to tdc compression , check and see if thats where it fires , I guess 2 cylinder are switched in firing order. in time you could figure out the firing order to any motor , no water pump , what a good idea ! Great stuff !

[@JamesAllen300]

found this bit of info on the internet about Model T compression..... The compression ratio of a Model T Ford engine was typically around 3.98:1. A new, well-built Model T engine with properly lapped valves and fitted rings would have a compression reading around 55 psi. Most Model T engines would start and run reasonably well with compression as low as 35 psi with the throttle wide open. Anything lower would indicate ring or valve issues. An engine too low on compression to start, likely below 15-20 psi, would have severely scored cylinder walls, burned valves, or other major problems. Compression readings in the low-to-mid 40s psi, even after a valve job and new rings, could indicate issues like excessive ring gaps, glazed cylinder walls, or other problems preventing proper sealing.

[@Hoa-Mechanical]

That’s great 👍👍👍👍

[@th86stone]

Vacuum/intake leak? Maybe the washers at 45:54 (looks like they have been added on) on the 3 and 4 intake bolts/(clamp downs?)? It does need quite a bit to draw in from the carb for a 4 cyl. Maybe remove the plugs and slowly crank and check the spark buzz with the stroke timing, confirmation. Did notice what looks like a crack on top of the exhaust manifold too. Or could it be to this at 1:28:18. Sorry if this confuses the issue. Please keep as original as possible. Great job Wawa, both on the wheels and piano, btw.

[@techo61]

After years of surfing YT videos, I can't believe how I've missed your channel till now (1246 am). Oh, and this world NEEDS more families like yours. Furthermore, this dad has got no worries about finding volunteers to change his diapers when he arrives at the other end of the cycle of life.

[@brucepeters508]

these are the only 3 kids that could be dropped in the desert with a car in parts on the ground and come out laughing that they finnished laughing with a running car this is parenting at its best keepup the good work love the vids thx bruce

[@Sleeperdude]

Thank you I appreciate that

[@Hoa-Mechanical]

👍👍👍👍👍👍

[@matthewhutchins4284]

Gotta have gas too lol

[@feron450]

My great uncle use to drive one of these back in the late 90s he showed me how to start them up the right way with the hand crank and whatnot. Such a neat vehicle

[@Hoa-Mechanical]

😜😜😜😜😜😜

[@dennysauls2117]

Now that's a oldie . Love it. Ladies and gentlemen it's sleeperdude and family time in Tennessee. God bless you all 🙏

[@Hoa-Mechanical]

😍😍😍😍😍😍😍😍

[@TheMooo1234]

Bro has the family I wish I had all his kids spend time working on cars with him I'm subbing just because of that lol

[@brucevallee5623]

Just because you didn't get it running in this video don't mean it's never going to run, I could see your face you got plans for this one. You guys are the best.

[@Sleeperdude]

Thank you

[@tommyhijmensen6257]

woohoo 👏the week is only complete when a sleeperdude-saturday-episode drops. I just can't get enough of them! Especially when its about wrenching to make cars faster and about the best youtube family ever ! Every episode i learn a lot from you guys about wrenching, especially from the the mechanical wizzard himself;Sleeperdude !😀🔧 Also a shout out to mom,who's camerawork is always topnotch ! As always thank you so much Josh and Tosh and the kids. God bless you all ! greetings from Holland 🙏🏻🚘❤️🇺🇲🫡🔧

[@danielktdoranie]

I love the sound of rain

[@DwaineJr.-tq3se]

Hi Holland Tom, I'm from Michigan USA I like what y'all said to this family. Thank you sir

[@tommyhijmensen6257]

@@DwaineJr.-tq3se 😉

[@Hoa-Mechanical]

😍😍😍😍😍😍😜😜

[@bookooc5605]

You just know that when Ralph and WaWa have kids, Squeeze will be loved as the crazy fun Aunt! 🥰🥰😂 God bless you all, the kids, the animals..Granny! Love live Granny! WaWa. so talented as you all are! Best part of my week is watching you guys. I don't really care about the cars anymore..it's just so nice to see such a great family with wonderful personalities.

[@Sleeperdude]

Yes absolutely

[@beernor]

This car deserves a full makeover. Make it nice, not just a runner.

[@aulestiastudio]

What a beautiful family ! The kids are great workers. The father is a great teacher and supervisor. The kids should be getting high school credit.

[@colinwheeler4166]

It's great to see Ur dad teaching Wawa to remove the old casings off the rims, while U work on the pistons and the engine. And it's great seeing U teach the kids how to install casings with tubes onto rims..

[@scottbryan5366]

Yay, it's sleeperdude family time🎉 We're loving these longer videos.

[@Hoa-Mechanical]

😍😍😍😍😍😍😍😍

[@larryswearingen8129]

I love squeeze, she likes that her dad loves it.

[@Hoa-Mechanical]

👍👍👍👍👍👍😍😍

[@richardvarner6636]

Y’all need to have the kids watch a few videos of the Ford Model T. They’ll learn a lot about how they got started, how they were made, and how many are still being driven today. Good history lesson for them.

[@twotypetwos]

I used to work with a guy that restored early cars, his favorites were AA trucks but i did help with a 1921 T that had an aftermarket aluminum speedster body. If i remember some of the earlier ones had leather main and rod bearings, the valves from a 327 Chevy fit or maybe that was the flathead V8 and the bands from a powerglide can work in the T transmission somehow. The one thing i remember from my time working on that old Model T was the steering gear is actually just under the steering wheel, not down on the frame. Love watching y'all's adventures.

[@kevinclark4689]

This is amazing! My dad has a 1927 Buick that needs work, but we have no idea where to start, and this video is going to help us out so much fixing it up!

[@Sleeperdude]

Awesome glad to help

[@SCOOTYANDTHEDUDESFAN]

Happiness Is Sleeperdude Saturday ! and it is a Vintage Ford video ! that is over 2 hours long of Good old Family Goodness. You guys are family. More Scooter and theme music. Funny thing is I was going to send you a Ford model t coil that my dad had in the fan mail

[@bowtiefidenine]

I noticed that when you engage The starter, the car rolls forwards. Try lifting the back casings off the ground. 😊

[@donnaeckler4190]

I would love to see it running, I got to drive one at the Ford museum in Michigan about 20 years ago. They had a flour mill, a glass blowing, a metal turner, and a blacksmith that you could make projects while there. So cool. I know you will get it running! Can’t wait to see it finished.

[@Hoa-Mechanical]

👍👍👍👍👍👍👍👍

[@Jbmc65]

Wow, what a lucky find, Awesome

[@ChrisPatrick-hg5mr]

Quick Tip Valve grinding compound can help loosen frozen bolts and screws even better than heat or oil believe it or not. This cheat move was told to me by an old timer when I was a young man. After seeing that I had rounded out several button head cap screws while trying to remove sheet metal covers, I was handed a pill bottle filled with valve grinding compound and told to put just a dab in each screw head (BEFORE rounding them out with my allen wrench) I'll tell you this tho I have even had allen wrenches twist up like a barber pole without rounding out. This also works good on rusted bolts, just stick a dab in your socket (again that's Before you round it off) That bottle lasted me close to 20 years of rebuilding machine tools.

[@mikeg6042]

Great video! My Model T touring car is a 1922. I’ve completely gone through the running gear from the radiator to the new bronze thrust bushings in the rear end. I love driving it. Your “T” appears to be a mix of years. It looks like a ‘26 or ‘27 engine. The serial number will be stamped on the block above the radiator hose. The piece in the “mining” equipment box is a commutator (timer) for the ignition system. I love that you own such an iconic piece of Americana. I with I could be there helping you bring it back to life. There are several places to purchase parts for the old car. One of my favorites has been Langs, or Schneiders (check spelling) or Ecklers. Just a few observations regarding my T that are different than yours. 1. My coil box is mounted inside the car below the dash. 2. My firewall is wood. 3. My fuel tank is under the seat. 4. My hood sides have a lot fewer slots in the sides. I may be wrong but I’m of the opinion your Model T is closer to a ‘25 with a ‘26 or ‘27 engine in it.

[@steveperyer4850]

Just love me some model T Sleeperdude Family Style. Got my popcorn dose and fresh sugar free coke.

[@Hoa-Mechanical]

👍👍👍👍👍👍😍😍

[@swannabe3764]

Fun story I heard about the model t when Henry Ford took bids on having the seats made for his model t he specified the crate that they ship in we made a certain way be on both of the crate and laid it out flat ,it made the floor board

[@ChristianBonney-s6j]

I think the funniest part of the video is the expression on wa face when you told her metal was not real metal anymore . Priceless Lol 😂

[@madmachinist2333]

Talk about no grease caps.... Years ago an old farmer told me they had a burnt out bearing in his A model and he packed bacon fat and grease in it and went on driving. 😂

[@Sleeperdude]

That’s funny

[@LindaDyer-b9u]

Once again never disappointed. We were hoping the girl would run for you, but We know you’ll get her running. I think she’s a beauty. We love your show and your family .

[@PastorPaulLeBoutillier]

I just LOVE Squeeze's comment: "When you'll gonna get something NEW???" 😁😁😁😁😁😁

[@Sleeperdude]

🤣🤣🤣

[@danielktdoranie]

The look of disappointment on her face when she turned around 😂 Squeeze does not approve

[@joeblow3939]

I had a friend that had a car from 1960. He went to RadioShack and got a radio to put in it. Just as soon as he turned it on it would light up then go out. He returned it and got another. It bib the same thing. He found out the car had positive ground. That's what kept burning up the radio's. ❤❤

[@Hoa-Mechanical]

👍👍👍👍👍👍

[@alec-sarah]

Granny sure wasn’t phased by the Model T cranking - she must remember them from her younger days, eh?

[@Sleeperdude]

She probably didn’t hear it 🤣🤣🤣

[@aproudamerican2692]

*Very nice piano playing W.* I got as far as learning how to play Chop Sticks and then gave it up. I widh I didn't but to late now.

[@Sleeperdude]

Thank you

[@y2kleader1]

I have a feeling it's your coils. If you can't find those types of coils, maybe you can find a way to retrofit modern ignition coils and distributer. I really love the way your family gets involved. Your kids are very lucky.

[@Sleeperdude]

Thanks for the tips!

[@larryswearingen8129]

Wawa sure gets into working on the cars with her dad

[@Hoa-Mechanical]

😜😜😜😜😜😜

[@CrusadesOClock]

Worth every penny, those old coupes are beautiful!

[@kenjohnson765]

How cool to see a GM Battery in a Ford that old! I Actually live in Anderson, Indiana and my Father worked at Delco Remy here, Just two blocks from where I live now.. Delco Remy is no longer in Anderson and I think they are no longer around. I am of opinion that the battery is a Replacement circa 1953-57..

[@Hoa-Mechanical]

👍👍👍👍👍👍😁😁😁😁

[@Kirill.zalyalov]

Your eldest daughter did well, she played the piano well👍👍👍

[@wolfgangricky]

Careful buying parts for that. 2 weeks from everywhere. I watch a guy whose channel's name is Iron Trap Garage. They are out of Pa. Near where i grew up. Anyway, they buy & sell old Ford parts & would be a good place to check for say the carburetor. They may even rebuild it & send. Good place to check. If he doesn't have it, he knows who to check. Tho Mortske could have one. Ty for taking us along

[@firemanjeffgg2440]

That rope is graphite impregnated twine. You can find it in the plumbing section at the big box hardware stores if you're lucky.

[@Hoa-Mechanical]

👍👍👍👍

[@chuckschultz7028]

After Durant kicked them out of GM, the Chevrolet Brothers made speed parts for Model T Fords. Frontenac offered everything from hot rod cylinder heads to complete T-based race cars. A "Fronty" even won the Indy 500! With a Fronty overhead conversion, that motor made lots more than 20 horsepower. Marge needs a hot rodded Model T!

[@coreycoate2910]

That would be awesome!!

[@JuricksEnterprise]

I was thinking how about the next burnout car for Ford Fest!! What could be more odd ball than a Gremlin then a hopped up Model T laying down rubber and blowing the casings!!!

[@leonhart2452]

On old rotten tires like those, I get the beads broke down, pry one spot up above wheel and hold it there while I cut through the bead with a cut off wheel on my angle grinder. This lets the rest of the bead come up off the wheel. I then pry up the other bead and cut the bead. This gets the old tires of easy. Clean off the wheels with a wire brush and prep for paint, then paint them. This helps the new tires go on easier.

[@Sleeperdude]

Ok thanks

[@timothyokane9710]

Maybe someone will send you a repair and maintenance on model T in 1 of your upcoming mail opening shows.

[@TheOriginalJayhawk]

Lunch time on a Saturday here in Australia. This is the best series of shows I've ever seen. So much love.

[@Sleeperdude]

Thank you ☺️

[@ronaldperkins7816]

I love it❤ you need to let squeeze do your negotiating, she could have gotten it for $2500! 😂🤣😂 I said before she could talk a blind man out of his dog!😂

[@Hoa-Mechanical]

❤❤❤❤❤❤❤❤

[@samthemultimediaman]

I watched a video about the model T in the factory, the babbitt bearings having 0 tolerance and they take and strap rear wheels to rollers and with it in gear it spins the motor over and wears the tolerance into the babbitt bearings. I also looked up what the compression should be, new should be around 55psi and it should run as low as 35psi.

[@Hoa-Mechanical]

👍👍👍👍😁😁

[@andreamills5852]

WOW ! Very cool . I bet Granny 🐐rode in a few of those when she was courting back in the day.

[@Hoa-Mechanical]

👍👍👍👍👍👍

[@mrfixit5404]

Would the carb from your tractor fit the model T for testing?

[@joshslackslack8115]

I would build a custom frame for it with some different suspension setup put a 302 small block in it redo the interior keep the paint the way it is and have a nice rat rod

[@JerryHaney-hf9oe]

Not trying to offend anyone but I think your wife has lost some weight and I only meant it as a compliment. I love the model T and I have always wish I could have found one I could afford. Hour your friend and neighbor from Alabama. Grant Alabama. And if your ever in my neck of the woods I have a three car garage but no lift but tools and jacks. And you’re welcome to it. My wife died two years ago and I watch you and several others and do dialysis three times a week. Thanks for what y’all do and my 30 year old son watching you and so do my grandson.

[@danandyong6653]

Keep that neat old battery as a display piece! Its unique

[@Sleeperdude]

Yes!

[@bitcoinpoker76]

@@Sleeperdude I hope you do, when I heard you say you could turn it in for the moolah, I was like I'd buy it!

[@jeffhiatt4000]

If I remember right, they didn't have plug wires, they had strips of copper that went from the plugs to the Magneto.

[@Grey_Beard72]

I was really thinking you'd get it going before the end. I'm sure you'll get it going real soon though.

[@eugenepiurkowski5439]

Boy, your daughter has sure become a great helper and is certainly learning the trade. Bravo.

[@gregreinhardt1293]

The rear side mount is for your 12ft whip antenna.

[@larrydixon-vi7ld]

My grandfather told me stories of how people would rebuild T model engines on the side of the road , using leather belts as inserts for the rods as they headed cross country, being poor in depression

[@Sleeperdude]

Crazy

[@mikeemerson8816]

i know its saturday!!!! i get to watch my favorite family now!!! its gonna be a awesome day now! plus im wearin my brand new sleeperdude tshirt!! life dont get no better than this!!!!!

[@Sleeperdude]

Awesome thank you

[@spikemcnock8310]

Another fantastic video, I like the way you show all of the process and not just odd clips. Your weekly videos are the highlight of my week and I understand the process of recording your work and the editing of it all, which I know how difficult it is. I do love the way all of you are involved in your projects. Keep them coming... 😊🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@Sleeperdude]

Thank you very much!

[@wingtipsworld5909]

as a first time viewer of this channel i have to say im impressed with the knowledge these kids have of working around cars and how well they get along with one another. Good job

[@cadman10000]

My dad told me stories about him buying Model Ts in the late 40s for $25 and $50 and just driving them until they fell apart.

[@Scrapmanuk1]

Your the only youtuber I can watch for over 1 hr Over 2 hrs even better thanks sleeper and family mat uk 🇬🇧 😊😊😊😊😊😊😊😊😊

[@jameskearney4100]

Well done on the piano!!!!

[@GossMania]

Hey sleeperdude looks like the battery is a 1966 delco battery originally $13.45. That’s so cool. 😊

[@HackeryX]

Josh make sure you guys do your research on the head bolts in that model T some of those old head bolts have oil passages in them not sure if that car does just keep it in mind

[@markd7685]

1:48:14 "History is usually somewhat of a drag but I gotta make a point, so let's go back to the Model T Ford. The distributor was attached to a rod which ended on the left side of the steering wheel in a lever. The throttle was on the right and you didn't forget which was which, either. To start the Model T you gave it about a quarter throttle and retarded the spark all the way by moving the lever up (if I remember correctly), then you went out and cranked the engine over. The choke wire came out of the radiator where it was handy and a vitriolic vocabulary was almost a necessary stock in trade. If you forgot to retard the spark the engine would fire backwards and the crank would either break your arm, tear off a thumb, throw you over into the ditch or all three." John Muir, "How to Keep Your Volkswagen Alive"

[@weasel2htm]

Seeing WaWa play piano at the end raises a burning question: When is she going to learn to play the Sleeperdude time-lapse music?

[@rodneycoleman4942]

Sleeperdude saturday. Loved the last episode with the metromite.

[@chevyfan82]

I don't think you have a compression issue or timing issue. I'm thinking the buzz coils aren't putting enough spark out. Under compression the spark energy has to be strong enough to fire. If it's weak it might not have enough umph to keep it running but to flirt with running. 👍 for the video as always.