Getting Roger’s 130 fixed up for all his work. He’s a keeper as a friend! Looked at what I though was a super AV. Turned out to be a 140 high cropper. He had two other 140’s for sale. Going to buy one of them as soon as he get an electrical issue fixed.
@Jtwes6 ай бұрын
Be sure to email some pictures
@nickblanton11276 ай бұрын
Rodger is going to love that fast hitch. Look forward to the Cole planter setup. Keep the videos coming as always god bless
@Jtwes6 ай бұрын
We will Nick. Hope to get that fast hitch going on Sammy’s A
@tommynorwood51846 ай бұрын
That’s just what friends and neighbors do . Help each other out. Thanks for sharing. 😎😎. 👍
@Jtwes6 ай бұрын
Thanks Tommy
@johnreidhar59776 ай бұрын
You can weld or braze the nut to the bolt. Make sure the weld is only on the nut and broken bolt, not the housing. The heat will help loosen the threads, in addition to adhering the nut to the bolt. It works good on manifold bolts also.
@Jtwes6 ай бұрын
Roger did that and was able to get the broken stud out. Praise The Lord no drilling.
@bobbyscott80246 ай бұрын
Hey Joey, the studs go in the front to allow for the standard drawbar and use the tapered nuts. Bolts go in the back the way you put it back on. I bought my 100 from the man that bought it new and that's the way they came out for fast hitch. The fast hitch was offered first on the Super C's ( 2 pt.) and then on the 100's ( 1 pt.) Take care! Btw, Michael Nardo in Jackson Springs has all that stuff! I think Burch buys from him sometimes. 🤔😃
@Jtwes6 ай бұрын
I have about 30 detailed pictures I took off a believe or not a New Old Stock 1979 140. I would love to have that tractor. I refer to them a lot on bushings and clips.
@nathanalmond82806 ай бұрын
Thanks for sharing the video Joey. Looking good. Roger will enjoy the fast hitch when he needs it. I'm sure he enjoys working with you as you two like to tease each other. Hope to get to meet him one day.
@Jtwes6 ай бұрын
We’ll make sure you do.
@leeasherbranner3556 ай бұрын
We switched over to 15/40 in the engine and hydraulic system. The new Hytran is different than the Hytran those tractors came with. If you run the new Hytran and you have a gasket fail on the pump you'll lose the bearings in the bottom end. That's what was wrong with my Cub and Super A when I got them.
@Jtwes6 ай бұрын
That’s definitely not good. Thanks for the info.
@robertmarino21586 ай бұрын
Congratulations on what Roger & you are going to do to upgrade , I do enjoy the videos stay safe & have fun !
@Jtwes6 ай бұрын
Thanks Robert. They have been fun to do.
@bartsexton16526 ай бұрын
Love these videos keep them coming
@MarkDuncanWSNC6 ай бұрын
I switched to Rotella 15/40 Diesel oil in my Cub, holds a solid 35 pounds of pressure no problem. High zinc content doesn’t hurt either.
@Jtwes6 ай бұрын
Hey Mark I’ve been thinking about trying T1 straight 40 rotella.
@jackgraham33936 ай бұрын
You guys are awesome, getting so much accomplished. Nice to have a well equipped shop to work in.. Felt a little sigh of relief, noticed a John Deere sign in Rogers shop. LOL. Hope the rest of your week turns out well. Waiting for the next video.
@Jtwes6 ай бұрын
Well I’m proud to tell you Jack Roger is new to Farmall. All he’s ever had is John Deere
@none5355melvinMadigan6 ай бұрын
I love the tractors repairs videos very interesting
@Jtwes6 ай бұрын
Thanks Melvin
@bamatractor6 ай бұрын
I took my cotter pins out of the rear cultivator bars and use hitch pins. Makes it easy to get the rear cultivator off quickly.
@Jtwes6 ай бұрын
I believe that’s what Roger plans on doing. I might change mine.
@MarkWYoung-ky4uc6 ай бұрын
Roger's 130 came with the slow hitch. Seems to me Joey the first time I remember seeing you, you were cultivating with that 130 and it had Cub wheel weights on it.
@Jtwes6 ай бұрын
It did and Pat from West Va swapped us some 100 wheel weights.
@MarkWYoung-ky4uc6 ай бұрын
@@Jtwes Bless Pat's heart. It looked odd with those Cub weights.
@Railfan906 ай бұрын
Looks like y’all have been busy working on stuff. The parts came for mine today, after walking several miles at the farm show…. I think I’ll wait and install them another day 😂
@Jtwes6 ай бұрын
Hate we missed you. We got there about 9:30
@sundownerwhoopwhoop50166 ай бұрын
Joey go watch bourbon beer tractor and prepping he rebuilds tractors and sells nice steps for tractors
@Jtwes6 ай бұрын
Well do
@JoeyNeal6 ай бұрын
That’s the kind of arms my 140 has on it wanting to do the same to it with a fast hitch on the oil I have heard that 15w-40 in cold weather can be hard on the older pumps but not sure
@Jtwes6 ай бұрын
I didn’t realize that rotella had a low ash straight grade 40 weight. Im going to try that.
@bartsexton16526 ай бұрын
Also wish you to would replace all the wiring on a 140 and or 130 . Both mine needs to be redone bad . Not even sure wire to get a full jet from
@Jtwes6 ай бұрын
Try this video it might help kzbin.info/www/bejne/kJXQk4Ghbc2CkKMsi=QDTEzG-R7utleAt8
@gleanerk6 ай бұрын
You and Roger over tools ! What’s wrong with rogers 100:
@Jtwes6 ай бұрын
I’m not really sure. He talked about maybe taking a serious look at it one day and mount that belly mower that was on the Super A on it.
@bartsexton16526 ай бұрын
Joey please show how you unstick the turn arms . I know mine is froze that goes across, not sure about the one or two that goes up and downward
@Jtwes6 ай бұрын
Hey Bart I got covered my friend It’s in the next video.
@markmoore86166 ай бұрын
I have a complete gast hitch for your super A
@Jtwes6 ай бұрын
Send me a email at Joey@jtwes.com
@taylorminifarm55986 ай бұрын
Just something to think about.., I put a fast hitch under my super A and the bell has a flat bar that the front lift arm hooks to.. why is that bar not centered on the bell that has the holes in it ..