New Ride ( Roger’s Farmall 130 )

I enjoyed driving Roger’s 130. I hope this fall to rebuild the hydraulic unit on my 140 this fall. As always thanks for watching.#farmall140#farmall130#sweetcorn
Instagram
/ jtwes1999
Facebook Page
/ jtwes-101009998899145
Hastings Corn
www.Raileyfarmandfield.com
Burch Store Tractor
www.burchstoretractors.com
Contact Me
[e-mail]
Mail:
PO Box 144
Prospect Hill , NC 27314

[@gitatit4046]

I think Sammy needs a raise for all those unique and closeup camera shots ... and maybe a dust mask 😆. But you both did a nice job plowing and getting those great shots👍 Thanks for sharing the experience fellers.

[@Jtwes]

I have to buy him a BB gun for filming already. Lol

[@gitatit4046]

@@Jtwes At that age that's a pretty dang good reward. I had to jump through more hoops than that to get one. 😁

[@paulbrooks2024]

Down home country living,,life is blessed

[@Jtwes]

Thanks Paul

[@stanleyconrad4234]

Good morning Joey. I’m glad I waited a short to comment. I’m partial to the 100 & 130 look, but I’ve gone of the deep end and have at least one of each. My 140 is the later square look. IH kept jumping the engine compression each model to add a HP or two. I just wish I had more ground to work and actually knew what I was doing. So much to learn as a newbie. I’ve got the tractor buying down pat! My banker and the family are showing signs of concern. ??? I’m still sorting through piles of Farmall “stuff “ trying to figure out what is what. I hope your family is well.

[@kennethhall5070]

I enjoy watching you help break in Rogers new engine. Love watching those cultivators work. Thank you for all y'all do. I'm grateful.

[@AirplaneDoctor_]

An interesting video idea you could do with Rodger, how he did the 6 volt to 12 volt conversion of the 130. It's a pretty common thing many owners do and there doesn't seem to be any decent ones on KZbin dealing with Farmall offset tractors. It would draw a lot of people to the channel just because of the specific subject as you always see questions on tractor forums pertaining to how to switch it over.

[@Jtwes]

I think it was like that when he got it. Having said that he could do it I’m sure and yes it would make a good video.

[@waveoglesby2920]

The rows look really good!!!

[@robertbarlow6715]

Ya having to much fun camera man is off the chain. Love it.

[@nathanalmond8280]

Looking good. That 130 reminds me of the 100 we had when I was younger. I wish my garden was that free of weeds and grass. I'm hoping to get a handle on it. Thanks for sharing the video.

[@Jtwes]

I think it helps some to cultivate it as soon as you can get over it.

[@nathanalmond8280]

@@Jtwes you are right. We had a few weeks of wet weather and I couldn't get in the garden. I worked it the other day and I will try to run through it again tomorrow.

[@lelandrentz755]

I love the music Sammy chose

[@Jtwes]

Hey Leland The Sammy bug does about 1/2 the filming with William. I take what they get me and do all the editing work to it. Sammy would probably have sound tracks to fighter jets on there .lol 😂

[@gleanerk]

You looked mighty happy operating the 130 .lapping good ! Have a happy BLESSED day.

[@Jtwes]

He’s slowly getting that tractor to a top notch ride.

[@digginfarmer5104]

Now that 130 is a sweet ride… thanks for another great video…

[@Jtwes]

Got me kinda jealous. Lol

[@hawkinscsa]

I need to get some of them rolling cultivators working on my old JD 320 with the 4110 cultivator. Nice work!

[@Jtwes]

Hey Tim I’m bet it could be done. The only bad thing is how much stuff cost now days.

[@tommynorwood5184]

Thanks for the memories with the 130. I learned to drive using a 130. My granddad had a 130 he bought it new in 1957 . He knew how old i was because old Red was 2 years older than me. Thanks for sharing. Have a good day. Keep on plowing !

[@Jtwes]

Hey Tommy Thanks for sharing. I learned on a Farmall 100. Thanks for watching.

[@Dunlap-uj5zl]

👍

[@stumpy2816]

👍👍

[@johnhall1614]

Great looking corn. Fine work. The 130 looks good

[@Jtwes]

I really am enjoying that tractor to much.

[@johnhall1614]

@@Jtwes I sometimes think I need to retire my 44 model A for a 140. It's such an old tractor and we ask alot of it at our place. I would never get rid of it, I have so many attachments for it that are hard to find it needs to be just a show piece instead of a work horse.

[@MarkWYoung-ky4uc]

Roger's 130 runs like a Singer sewing machine. Seems like the first video of yours I ever saw you were using it. Y'all got the perfect land over there for rolling cultivators. You plant corn about like I plant tomatoes, enough for everyone!

[@Jtwes]

You right I used it a little. Poor think was blowing oil out the valve cover. Lol

[@torril4904]

Sounds like Roger's 130 is purring like a kitten. The corn looks fantastic. (P.S. Saw you over at Meredith's doing a little work with your family). Blessings 🥰

[@Jtwes]

Thanks Torri It’s always fun to help Meredith out.

[@DeepSouthHomestead]

I love cultivating crops on the farmalls. Nice rebuild job on the 130. I'm so OCD I would have done the whole tractor.

[@Jtwes]

Hey Danny He’s like me he’s going to make sure all the mechanics are ok and I think he’s planning on painting the whole tractor then.

[@DeepSouthHomestead]

@@Jtwes awesome it brings joy to me to know another Farmall has been restored.

[@jamesglavich1426]

With such good camera work I can see the rear lift arms are floating. Looks like you need to move the bottom collar up to apply more down force. That type of top collars were actually used with a shaft, with those there is a elongated slot, so they require a little more spring pressure. I have a pair of 5 spider Lillistons that I wish that I could trade for a 4 spider set. The 4 gang type is a little easier to mount. The camera work in your videos is great with the different angles and closeups.

[@Jtwes]

Hey James Thank you and Thanks for watching. I run my 140 rear like that. I didn’t change anything on the 130 because that’s Rogers tractor.

[@lamontpowell6235]

Looking good, I was wondering if you were really going to can that whole patch. Nice thing about 100 / 130 / 140 is the rear sweeps have a separate hydraulic function so they can plow deeper while the front cultivating can be shallow on small plants.

[@Jtwes]

I don’t know if it’s because it doesn’t have a fast hitch but that 130 doesn’t put the same amount of down pressure on the back feet.

[@Wayne-wg9nu]

nothing like the sound of a farmall

[@Jtwes]

Especially one with a lot quieter rear end than mine. Lol

[@Wayne-wg9nu]

That's one of the unique sounds lol

[@jeffmc7946]

So has Roger put out an APB out on his 130 yet? You looked comfortable driving it! Might have followed you home! Thanks for sharing. Rolling cultivators seem to do a great job. I am accustomed to sweeps on the cultivator.

[@Jtwes]

I told him I wanted it. I got a video coming up on what you can use if you don’t have rolling cultivators.

[@paulcarter5383]

That fertilizer I was telling you about is Milorgranite

[@Jtwes]

Thanks Paul

[@billroberts3864]

Sammy, another great video with nice camera angles to see what is going on underneath the tractor. What is the function of the sweeps?

[@Jtwes]

Hey Bill Just something to plow the wheel tracks out. Plus if there’s angled right “which they were not “ it will flatten out the row were you walk.

[@Railfan90]

I got a couple rows of silver queen going here now. I’m ready to start picking stuff already…. It’s been too long since I’ve had a decent tomato 😂

[@Jtwes]

Need a little shower or two right now.

[@Railfan90]

@@Jtwes you aren’t kidding. The ground in my garden is about as hard as my driveway is at the moment….. and it’s concrete 😂

[@alkennedy1124]

Just sent over from this farm wife Meredith Bernard when is and who will be at the local tractor plowing deal, ?? Thanks BigAl California

[@Jtwes]

Hey Big Al It’s October 7th. There will be Me and some of my subscribers and Meredith and Farmall51 . We’re not a big big show but it’s a good time.

[@natevanlandingham1945]

Sounds like he stills needs to rebuild/tune that carburetor.

[@Jtwes]

I drove it yesterday and I’m thinking maybe the governor . Doesn’t seem to want to bust out until it gets a load on it.

[@OldRedTractors]

Looks good. I see the corn almost touches the bottom of the tractor. When do you cultivating stop based on height?

[@Jtwes]

I wouldn’t be scared to bend it a little.

[@waveoglesby2920]

How did you like the rolling cultivators attacked to the tool bar. I’m thinking I’m going to start doing that as the things are so heavy it’s easier to put them on the tool bar.

[@Jtwes]

I don’t like it. There to far back for me to see how much dirt there throwing.

[@Crowbar47032]

Looks like you have the rolling cultivators mounted to the tool bar on the 130, but mount them to the extension bar on your 140. Any particular thought process in those configurations?

[@Jtwes]

Hey Jeff Yeah it’s a pretty simple reason. Roger likes his to be on the main arms . I don’t like it that much because it’s hard to see how much dirt your throwing. After the plant gets a little taller it’s not that big of a deal.

[@rorywilliams7706]

Nice old 130 there, corn looks great. How often in a growing season do you add 10-10-10?

[@Jtwes]

I add it every time I cultivate up until lay by and then hit it with ammonia nitrogen

[@robertpayne2717]

Yes that helps, my roasting ear patches I'd fertilize with balenced fertilizer after working it out/cultivating, then watering. Mostly would have nice ears and full kernel development. At the house on my small garden I tried to use a little Caster oil a drop or two on the ears when they began to silk. Kept ear worms 🪱 out.

[@williammay5300]

I wonder if a 130 could pull a 2 dishpan plow with drag wheel connected to the steering wheel? Just like a super A tractor.

[@Jtwes]

I would imagine if it will hook up to it the same way I would say most definitely.

[@williamfromky8109]

Are the 130's and 140's just updated Cubs or different tractors? Thanks for the viedo's

[@___PK__]

More evolved from the Model A's and Super A's.

[@Jtwes]

What PK said it’s evolved from a A and Super A which is a whole different and bigger tractor than the cub.

[@waveoglesby2920]

How many times do your cultivate the corn plots before you lay it by?

[@Jtwes]

Depends on weather most of the time about 4

[@waveoglesby2920]

Does Roger have a fast hitch for his s 130? I see there is not one on there.

[@Jtwes]

He’s on the fence about getting one. All his harrows and plows are 3 point and he doesn’t have anything fast hitch.

[@dylanhockaday9878]

I gat me a 130 today

[@Jtwes]

Congratulations Dylan 👍👍👍

[@lonahlen8266]

Did I see you up on a sketchy man lift messing with IT work? 🙂

[@Jtwes]

I was going to stand all the way down but Leno was having a fit for me to kneel down. Lol

[@rogerturman2467]

I am new to Farmall 140. I have a few questions is there a way for me to talk to you one on one. Thank you Roger Turman

[@Jtwes]

Yes sir just email me at [e-mail]

[@jameskiley4182]

Is there any real difference between the 130 and 140?

[@Jtwes]

Hey James Cultivating no , Mechanical there are some minute difference.

[@cameroncarter2207]

Which tractor do you like the best 140 or the 130 100 / super A

[@Jtwes]

I like late model 140s the best. But I would be happy to own a 100 or 130.

[@waveoglesby2920]

Where do your put the disk on the tractor?

[@Jtwes]

Which disk.

[@waveoglesby2920]

@@Jtwes the disk you will hill the corn with when you lay it by?

[@Jtwes]

They mount same place as the rolling cultivators.

[@markweber2958]

Only made 4000...in 1957....I have one also ...it's for sale...

[@Jtwes]

They were a short run and jumped right to the 140. Hope you get her sold.

[@robertbarlow6715]

Y'all got to stop

[@tomharrington1393]

👍👍