Juki DDL-5550N, DDL-8700, DDL-8700H etc. troubleshootiing tight parts

Juki DDL-5550N, DDL-8700, DDL-8700H etc. troubleshootiing tight parts

[@cheriewest4676]

Hello, My new DDL-5550N (purchased new in June) has just stopped moving thread through the tension discs. I have threaded it repeatedly thinking it was just threaded incorrectly, but I get three stitches and the thread breaks. The tension is backed all the way off. When the tension is tightened, I get the same problem OR with Nylon T69 thread it won’t pick up the bottom thread and just clumps and eats under the fabric. Can you help me please?

[@karenbochinski]

The stitch length allows me to go forward but not backward to a 1.0. I hit the reverse level but does not allow me to go below 2.5. Do I need to get the screw driver to loosen the stitch length?

[@peggybray5450]

Thank you mine was so tight

[@frosiapolushkin8811]

So I have this machine. It's been great. All of a sudden it starts sewing without me even touching the pedal. It does this off and on. I have the servo motor. What can be the cause if this?

[@salamatuowusu4374]

Hello Mr Steve I bought the same machine from you I think 5 years ago is a very good machine my foot pedal is lose and try to fix but it keeps on falling please what can I do

[@ptnphotos1835]

I’ve DDL-5550N, please help me to fix the skipped stitches. Thank you

[@CharlotteGlamour]

How do you fix excess vibration on a 5550

[@FFPages]

the screws to the face plate is extra tight from the vendor. can i use an electric screwdriver to loosen it? The vendor said not to, but they tighten the screws too tight.

[@vladspb_]

8700 makes forward stitch longer than back stitch. How to fix it?

[@tonydang4630]

you do repair too ? I have Juki DDL-5550N-7 Industrial Sewing Machine

[@makulittv4603]

my juki ddl-5550 stock up the lever how to fix it sir?

[@CB-hi7mf]

How do you fix a jam?

[@homeeconomics1019]

I have a question, Juki DLL8700 have a screw with + and - SIGN at the bottom on the bobbin rod? What is this the function of this screw?

[@Sewinggold]

It is to increase or decrease the oil going to the hook assembly.

[@rivii2577]

thanks a lot

[@teresaguerrero5546]

Thank you for all your videos. Do you have a video as to why juki ddl 8700 won’t sew in reverse?

[@Sewinggold]

It won't stitch or it will not reverse?

[@raghuveerdevalpalli8022]

Sir, please make video on adjusting cam gears of juki ddl 8700

[@justincase1889]

Hi. I have a JUKI ddl 5550 model. I accidentally touched what is called a eccentric synchronizer. Do you have any videos of how to adjust timing of eccentric synchronizer. My Sewing Machine is already a mess. I adjusted many parts already mainly the feed dog system. I found vidoes of eccentric synchronizer in KZbin but they are all in spanish. I dont understand the explanations they are trying to teach. I would really appreciate if you have any videos for it. Thank you very much.

[@Sewinggold]

I'm sorry. We have not done any videos on that part. I'll pick my mechanics brain Monday but I cannot make any promises.

[@justincase1889]

@@Sewinggold thank you very much for the bother. It would be of great help. Godbless. Thank you very much for the reply.

[@wajahatsohail2435]

Hi My JUKI DDL 5550 Motor doesn't start directly. It requires some push of machine's pulley. What can be the problem? Is it some serious condition?

[@hotkadine]

Hi did you have a video about the clutch on the industrial machine

[@Sewinggold]

Which brand and model machine?

[@pedroduarte5199]

Hi! Do you have any troubleshooting for electrical problems? My machine isn’t working... 🙏

[@Sewinggold]

We do not. Did you check the fuse on the motor switch? Check the brushes on your motor too.

[@UmerQureshi-cn7is]

my juki ddl-5570 steching backword .when i puched revers handle down they stech forword how to solve this problem

[@trucdoan408]

Can you tell me what size motor v- belt for industrial sewing machine juki DDL-550on because bobbin winder not working , I thinks cause belt has stretch, I want order new motor v belt , if possible , you can make a video about how to replace the belt

[@Sewinggold]

The belt size for a DDL-5550N with a clutch motor is 41". With a standard servo motor it is 39". This will depend on where the motor holes are drilled and also the motor's pulley size. Different motor brands matter too. When I have some free time I can make you that video.

[@maifj85]

Hi, do you have video for fixing the timing of ddl 5550? Thank you so much

[@Sewinggold]

I have some unlisted videos that may help you: kzbin.info/www/bejne/famwhWaLm6qSqs0 kzbin.info/www/bejne/joWTemaGpMd8eKM kzbin.info/www/bejne/j3zbiKCejsSYfqc kzbin.info/www/bejne/qZ6WoY2kjryHitk

[@chandaracroom5320]

How to fix my Reese make noise

[@sisirakumara2555]

My ddl 9000ss machine not working feeding how edjasment this problem

[@sew_april]

I have the ddl 8700 my knob works opposite how can I fix that? Also the reverse bar moves when I turn the knob. Can you do a video please? Thank you! & great videos!

[@Sewinggold]

The reverse bar will move when you turn knob.

[@sew_april]

@@Sewinggold ok thank you!

[@reigsvillanueva8350]

What happened when the stitch regulator broken

[@luciboras]

Hi, Is the Juki DDL-5550 the same as the Juki DDL-5550N? I inherited Juki DDL-5550 a few months ago but just started learning to sew.

[@humerasyeda3523]

It might have slight changes

[@michaeledwardjones12]

My needle keeps breaking as soon as I start sewing. What could that be? Is it the machine is set too fast?

[@Sewinggold]

I doubt it's the speed. What needle class are you using? The DDL-8700 and DDL-5550N use DBx1. The DDL-8700H used DPx5. If you are using the correct needle class and still breaking needles, your machine may be out of time.

[@michaeledwardjones12]

@@Sewinggold Thank you!!! I eventually took it in. I was the timing. I appreciate all your help!!!

[@LULU_1990]

my belt is scrapping against the belt gaurd sooooo annoying i ajusted it so many times i have a JUKI DDL-5550N how do i tighten the Belt??

[@Lovemusic856]

Adjust the motor's position, move it apart from the sewing machine and it create tension for the belt.

[@odettelaforge4229]

The reverse lever vibrates when sewing, is it normal?

[@Sewinggold]

Check to see if your feed dog is hitting the needle plate.

[@ChelleDiaries07]

Hi...i have a ddl 5550. My problem is i do know how to lock stitch...can u help me how?thanks

[@Sewinggold]

Use the reverse lever.

[@faustynutogo2258]

Please sir your new subscriber , l have a question my reverse lever is always shaking when sewing can you please help

[@Sewinggold]

Take off you needle plate and see if the reverse still jumps.

[@goheldilip4711]

Price

[@atifmehmood7009]

Sir can u tell me this machine price Plz

[@Sewinggold]

Here are links to 3 machines in the title. Each one is on our website with prices. www.sewinggold.com/J8700.html www.sewinggold.com/J5550.html www.sewinggold.com/J8700H.html

[@faizantailormotebazarkhari9390]

Hi sir my job ples

[@skmoinuddin1290]

Hi

[@goheldilip4711]

Price