Juki DDL-8700H capabilities

This video show the Juki DDL-8700H sewing through thin dress pant material and thick vinyl. We are able to sew up to 14 layers of vinyl. The DDL-8700H uses a different needle system then the standard DDL-8700, and has 18 different parts to allow it to use heavier thread and sew heavier fabrics.

[@CorinaBarker]

Holly molly! I was looking for info like this to know the capabilities on my Juki. Thanks so much I understood the importance of the needle number when working

[@Cyrilmc222004]

Steve that’s awesome and amazing I really enjoyed your tutorial, and I have a Juki coming on Monday, it’s for Christmas 🎄 and I can’t wait to have a go. I’ve brought for sewing 🧵 heavier fabrics so, you’ve just demonstrated perfectly how well this machine works. Thank you so much 😊

[@Sewinggold]

No problem at all. Congratulations on your new Juki. I'm sure it will take your sewing to a new level.

[@kill5326]

ur video is helping me 5 years later thank u ima cop

[@Sewinggold]

You are most welcome.

[@johncichello878]

11:21 some smoke actually appears briefly as part of the stress test. Very strong machine!

[@Sewinggold]

You are right. I don't remember seeing that.

[@stin987]

Wow! I saw the smoke. That’s a lot of friction.

[@antonioteul3590]

Great machine, thanks for sharing the video. Greetings from 🇧🇿

[@maisiemannerssewing]

Thanks for this video its been really helpful! I have recently got this machine and I am sewing outerwear and bags with webbing/thick canvas and sometimes heavyweight wool and upholstery fabrics - It works a dream but I am unsure of what needle size and thread weight would you recommend for this type of work? And if I wanted to sew some normal pieces (dressmaking) would this machine be able to do that too with a smaller needle? All the best! Thanks again

[@stoneblue1795]

Well stated, thanks!

[@4vrceltic]

It would be nice to see you adjust the tension and stitch length on this machine. 🙂

[@MsVictoraguero]

Thank you, very nice

[@Sewinggold]

Our pleasure!

[@idelivermotovlogs126]

Nice machine

[@cliffarnold7463]

Thanks for the demo

[@Sewinggold]

No problem.

[@cliffarnold7463]

I should add that he’s also throwing in multiple feet, 4 spools of thread, and yards of fabric as a “starter kit” too.

[@cliffarnold7463]

Somehow I overwrote my original reply… I just made a deal on a used DDL-8700 for $450 + shipping (complete except oil and a light). That is with a “modern” clutch motor, But he said he’d put in a Consew Servo Motor and proper belt for an additional $150. Worth it??? I think so. I’ve never even touch a sewing machine before, so I hope it ends up being a decent starter machine.

[@evieg161]

Amazing machine!

[@marybowers789]

Thank you

[@elaforte173]

Thank you for this video. My question is can it sew on Velcro and if you are sewing with leather do you need a walking foot and can you purchase a regular walking foot for the machine. I’m a little confused when I hear a walking foot machine as opposed to an accessory walking foot like on home machines. I went on your site and do not see that as a purchase. Also advantages to the different tables you offer.

[@tiffanybatchelor3058]

Really thinking about getting this machine

[@Sewinggold]

It's a stock item. sewinggold.com/product/juki-ddl-8700h/

[@waynestanton467]

I have this machine and love it. Just wondering, will the feed dogs off a 8700 fit the 8700H

[@jorgesxbass7606]

Congratulations Bro !!! Very Nice Juki The diference Model 8100 X 8700 ?? Greetings from Portugal THX.

[@scottmatthewfrye7704]

Wont that thick vinyl throw off your timing? Isnt that more for a walking foot? How thick can you sew on this juki 8700/?

[@dianemakes]

Thank you for this excellent demo. What size motor are you using in this video?

[@Sewinggold]

It is a 3/4HP, 550W servo motor. Thanks for watching!

[@sweetreat30]

Can we please see the capacity of the 8700 regular?

[@ravenluchangco2833]

Good day. Can i use this model for sewing 1000d cordura that is folded 8x or can you recommend another model. Thanks.

[@Sewinggold]

A walking foot is going to be better with multiple layers, but we were just showing the capabilities of the Juki DDL-8700H. If I was consistently sewing with more then 8 layers, I would get a walking foot machine. Thanks!

[@valeriatheall3922]

Which motor does this machine have? 3/4HP servo motor or reliable 3000SM servo motor?

[@Sewinggold]

I really don't remember which one we were using for this demonstration.

[@valeriatheall3922]

I ordered the reliable 3000SM servo motor from you guys today. I was going to go with the 3/4HP servo motor but decided on the 3000SM because of the UL. In addition of the speed control that you mentioned to me. Can't wait to start working with it. It seems to handle faux leather really well. Reason why I wanted an industrial machine in addition of using layers of fabric with interfacing. Thanks for helping out today! You were awesome answering all my questions.

[@Sewinggold]

It was no problem at all. Anytime you have a question, email or call me.

[@dullpoint1072]

@@valeriatheall3922 has it worked out for you? I'm debating on that very thing. Examples show plain fabrics but I would be using stabilizers and interfacing. Also there's leather that isn't near as thick as the vinyl he's using. I use different grains of leather for my bags and that many layers of vinyl is still thicker.

[@sajidrafique5371]

Good sawing machine

[@raselahmed3932]

Nice

[@Sewinggold]

Thanks

[@apostolicbible1]

Will this machine sew two 5-6 oz pieces of leather totaling 10 to 12 oz together for our making book bags...basically sewing two gussets 2" x 8" to one piece of leather 23" x 10" on the outside of the seam and thus making a round bottom bag with flap? This could be done in two sewing runs if the machine can handle this. I know a compound walking foot could do it, but they are twice as expensive. Thanks Steve!

[@Sewinggold]

The best thing for you to do is send me a sample for us to try on our floor model. I believe a walking foot will be the way to go, but we can try it on the DDL-8700H. If you would like to send me a sample to sew on, email me at [e-mail], and I can give you our address. Thanks!

[@pathao9719]

Hi! I’m really curious if you can use double needle for this machine? Looking at the double needle designated machine price and thought I could save money just by getting a double needle to use on a single stitch machine instead? 😅

[@ruthstans2229]

Hello i was wondering what feeddogs you have i have trouble with hanging up

[@a_k_t6526]

Nice machine. What is the heaviest thread you can run with this machine? 14 layers of vinyl is impressive. Can this machine handle 4 to 6 layers of 7-9 oz veg tanned leather?

[@Sewinggold]

Heaviest thread would be T90. It will not sew 4 to 6 layers of veg tanned leather.

[@camerond2522]

Can you use this machine to sew 2-4 layers of 3-3.5oz leather? I currently have a Cobra class 4, but looking for something that can handle smaller projects like wallets and garments.

[@Sewinggold]

I'm pretty sure it could. I'm not well versed on leather weight, but I have sewn multiple layers of leather on the machine without issue. I would not use the machine to make belts or holsters.

[@SipLeila]

No walking foot needed? What is better about the Juki-DU-1181N?

[@Sewinggold]

What kind of work are you doing? If you do not need a walking foot and are doing some heavier work, look at the Juki DDL-8700H or DDL-8100eH/X. They are not as heavy duty as a walking foot, but are a step below.

[@davidhansen1478]

I'm trying to decide if I should get this for sewing quilts and free motion quilting. Would you recommend it?

[@Sewinggold]

I have set up a standard DDL-8700 for quilting, not a DDL-8700H. It will depend on how thick the quilts are. The DDL-8700 uses needles from size 9 to 18, and the DDL-8700H uses needles size 16 to 23.

[@4vrceltic]

SewingGold.com Do you have a video on your standard DDL 8700? What is he lightest fabric it can see well, and What is the heaviest material it can sew well/easily. Thank you. 🙏🏻

[@systemunderground]

Can you put LR needles to juki 8700?

[@tammysoto3019]

What size bobbin is used for the Juki ddl 8700? I bought some and they keep falling off the winder, does not fit. too big

[@Sewinggold]

The bobbin is an "L" bobbin. Please watch this video for bobbin winder fixes: kzbin.info/www/bejne/Z4bJZ3l7mM2HmMk

[@luismartinez8705]

you have to tighten to bob post .the little slot on the post open it

[@selvarajraj3094]

Tammy Soto

[@Helikopterpop]

What does that H stand for in the model name? Ive only seen ddl8700 before. I hate when theres additional letters and its often hard to get information if its some important feature. Like heavy duty or some special capability.

[@Sewinggold]

You got it. Heavy.

[@blipoop1]

Is it possible to make the needle go to the upward position when stopping?

[@Sewinggold]

The only way you can do that is if your motor has a synchronizer/needle positioner. Our Reliable SewQuiet 6000SM has the ability to add an optional synchronizer. sewinggold.com/product/reliable-sewquiet-6000sm/

[@jrv858]

Im looking to get my 1st machine to learn auto upholstery would this machine be good enough? If not what is recommended?

[@Sewinggold]

A compound feed walking foot would be a better option. sewinggold.com/category/walking-foot/

[@jaykay643]

How did you put in a 16 needle...what make/number is it. I thought the dbx1 range for the 8700H was 19 - 23 and that the needle shank size below 18 drops to 1.63mm? Yes, I'm a newbie

[@Sewinggold]

DBx1 is incorrect. The machine uses DPx5. You can use size 16 to 23, but we have used size 14 without issue.

[@bigfranksworld]

Can you tell me what the max thread size you can use in this machine as it comes with factory settings? Also, I know it has a servo motor. How slow can a person stitch with it? Thank for the info.

[@Sewinggold]

Max thread size I would use is T90. It is sewn off from the factory with T70. With our new 1HP brushless servo motor it can sew ultra slow. sewinggold.com/product/sewinggold-1hp-8-pole-brushless-servo-motor/

[@hdb80]

If you want the needle in the down position to pivot on corners, do you just do it manually on this machine?

[@Sewinggold]

You need a needle positioner/synchronizer.

[@joepentolino1459]

What is the difference between this machine and the 8700? Thanks

[@Sewinggold]

The DDL-8700H has 22 different parts in it that are different from the standard DDL-8700. These parts allow the machine to sew with heavier needles, thread and fabric.

[@78josemarcos]

So you don’t need to adjust the hook timing after changing to any other needle size ?

[@Sewinggold]

The machine can use size 14 to 22 without adjusting the timing.

[@78josemarcos]

@@Sewinggold thanks

[@arunasavalia2108]

I want for regular use not commercial.... its good on heavy clothing but is it good in very very light clothes or silk material. Is it good idia to buy only for house use... i only stiching my clothes,... but i like this bcz it has platform... i am using singer's portable one ..can you or anyone here suggest me good sawing machine with platform in affordable pice for runig use pls. Thank you 🙏

[@Sewinggold]

Hi Aruna. If you are doing light, medium and heavy clothing, you are better off getting the standard Juki DDL-8700. The DDL-8700H will not sew well on light weight material. We have the Juki DDL-8700 here: sewinggold.com/product/juki-ddl-8700/

[@PoopheadandtheOut]

you made a sewing machine test video into a horror movie, the second half I was just being worried about needle break, had to watch through gaps between my fingers

[@tinapromise3480]

Hi...how can i found out if my Juki ddl 8700 is a low or high shank machine?

[@Sewinggold]

It is similar to high shank. High shank and low shank are usually used to describe household sewing machine feet.

[@arturojuarez3639]

I have a DDL 8700H and it has been hell. It's a great machine but when I got it the hook assembly was broken like shattered. I changed it then spent 6 months figuring out how to time it and finally last week I got her going and she runs great but sometimes the thread gets stuck. What size needle does my machine use? They sent size 14 and 21. The company I bought it from is horrible and they do not answer

[@Sewinggold]

Size 14 to 22 should work, but it would depend on what you times it with. The class of the needle is 135x5 or DPx5. Remember that needle size 14 will not work properly with T70 thread. Needle size 16 and above for T70 thread.

[@peggybray5450]

How about leaver I have this machine

[@PURNIMA_360]

How much in indian currency?

[@apostolicbible1]

It seems like everything you sewed was fast. Can this machine go slow? Did this machine have a clutch or servo motor? Great videos.

[@Sewinggold]

There was a servo motor on this machine. I was sewing fairly slowly, but the motor can go slower. Thanks!

[@elainejackson1465]

What size needle are you using for that light weight fabric?

[@Sewinggold]

Size 14

[@diedre20020]

How does the 8700H compare to the 1181N?

[@Sewinggold]

It's not quite as heavy duty and is a bottom feed only. The DU-1181N is a top and bottom feed. The DU-1181N has a double capacity bobbin case compared to the standard one for the DDL-8700H.

[@smartlife5353]

Can we sew light fabrics with this machine. if yes which type of light fabrics can we sew.

[@Sewinggold]

It is not meant for light fabric. The minumum needle you can safely use is a size 14. I hope that helps.

[@thomastrenchard8197]

Hi, what could happen if I use a smaller needle for lighter fabric? Thanks

[@sebastjansslavitis3898]

what needle system it uses?

[@Sewinggold]

This machine uses class 135x5 (DPx5) needles.

[@sammichael3285]

Pls EMEL 8500 vs JUKI DDL-8700 which one is the best pls??

[@Sewinggold]

I am not familiar with the EMEL-8500. I assume it is a clone of the Juki DDL-8500. If it is a clone, the original is always better in my opinion.

[@joepentolino1459]

Which is better for upholstery

[@Sewinggold]

Upholstery work is best done on a walking foot machine like the Juki DU-1181N or the Juki DNU-1541 series. If you were going to use one of the DDL-8700 line, the DDL-8700H would be the only one.

[@ppray19]

Does this machine sew any fabric of any thickness?!

[@Sewinggold]

This machine will not sew well on light weight fabric and knits. It is made for medium to heavy material.

[@ajlauj9495]

Does this machine come with automatic foot lift?

[@vadim3976]

No. Hand or knee lifter.

[@alanthomas561]

Will this machine sew up to 1/4" inch leather?

[@vadim3976]

Better look at the Juki DNU-1541 a triple feed walking foot machine.

[@kwakyekwame699]

Please Needle type

[@brianburnssailorslife5383]

I'm new at the whole sewing thing and compared to my current machine, this machine has huzzpa.

[@willywinket]

Wow thanks. I'm thinking about getting one of these to try my hand at making backpacks with like 1000D Cordura. Looks like it will easily handle that!

[@Sewinggold]

We always have them in stock.

[@DRAGONSTUDIOSTV]

right on mate! that's exactly the same type of thought we have in mind. will be sweet on patches with velcro stitching, tactical cordura wallets, iff patches, and maybe some leather too.

[@DRAGONSTUDIOSTV]

greetings from portugal! check us on instagram #DRAGONSTUDI0S

[@vieuxacadian9455]

No thread lube ? Pretty impressive being a non walking foot .

[@metalprojecttools7719]

What i the size of needle exactly..no?

[@Sewinggold]

The class of the needle is 135x5. You can use size 16 to 23.

[@BLNTSMK]

what about sewing silk & light fabrics?

[@Sewinggold]

Not recommended on this machine. You would be better served with the standard DDL-8700.

[@PatternYourStyle]

Please How much is this Machine ?

[@Sewinggold]

Visit our website for the price. Thanks for your interest! www.sewinggold.com/J8700H.html

[@luismartinez8705]

can you convert a 8700 to an 8700H

[@Sewinggold]

It would not be advisable. There are over 20 parts to change and the timing too. Please see this video: kzbin.info/www/bejne/n3nYgGSji7-lopI

[@nauxsi]

Could this handle suede and lamb nappa leather?

[@Sewinggold]

It can, but the feed dogs may be too aggressive. Changing them to Teflon would help.

[@nauxsi]

@@Sewinggold thanks. Currently have an adler with teflon feet, looking to add needle feed for lighter stuff which also help with inner linings.

[@apostolicbible1]

I went to Amman and searched for t70 and nothing came up.

[@Sewinggold]

Email me and I will send you a color chart with the different sizes. [e-mail]

[@hashimp8945]

How much is the price, sir?

[@Sewinggold]

It is available on our website. Here is the link: sewinggold.com/product/juki-ddl-8700h/

[@3AsianBoi]

How many ounces of leather can the regular juki ddl-8700 sew?

[@Sewinggold]

It is is a standard DDL-8700, only garment weight leather. I would not know the ounces.

[@leenasalunke6773]

Which is better?? Made in Japan or made in China?

[@Sewinggold]

When it comes to Juki, the machines are similar. I can't really tell the difference between the the Chinese made Juki DDL-8700 to the Japanese built DDL-5550N. The specs are the same. The body of the machines look different, but they sew just like each other.

[@4vrceltic]

Leena Salunke Always JAPAN made is BETTER!

[@brittneyyoung1882]

Can I sew clothing spandex leggings or knit dresses for women with this machine?

[@Sewinggold]

I would not recommend this machine for spandex or knits. Look at the Juki DDL-8700, DDL-5550N or DDL-8100e. www.sewinggold.com/J8100e.html www.sewinggold.com/J8700.html www.sewinggold.com/J5550.html

[@brittneyyoung1882]

@@Sewinggold Thanks!

[@shelbylynn9454]

@@Sewinggold I have a 8700 and i cant seem to get it to work with knits, I have messed with the pressure foot and even got a new bobbin casin, i am unsure whats going on. can I call you or email you even tho I didnt buy directly from you?

[@sajidrafique5371]

Price in Pakistan

[@user-qj1pr4ho9c]

this's not orginal leather

[@Sewinggold]

We are not sewing on any leather in this video. Just vinyl and polyester.