Juki DDL-8700 presser foot lifter fix

Juki DDL-8700 presser foot lifter fix

[@trendy_tati]

Thank you 👍 I thought I was going to have to pay someone to fix this!

[@Olivers-G0mmer]

You guys are so awesome! I learn so much from your videos and if I ever do have a question, I know I'm going to get an answer, maybe even by video. You have created your own niche market for home sewists who want to move up to an industrial machine. You make it so easy to assemble and set up! Best sewing machine purchase in my life. 👍

[@unabashedlove9511]

You guys have the best most diversified videos on sewing machines than any other sewing company that I have found. I will be looking into your company as a new customer. Thank you so much for doing a great job on your videos.

[@stardustwalker2300]

Thank you! Thank you! Thank you! The movers literally dropped my machine a COUPLE times when they moved me back in December (I can tell just by looking at it) and I’ve been in a funk for 6 months. I had to replace a few parts, but this lifter issue was the last thing to figure out. Juki guy said he charges $65 just to ring my doorbell…. Once again, Bertha (DDL 8700) is sewing beautifully. Your videos are so helpful…. Again, thanks!

[@Sewinggold]

Glad to hear we could help you Stardust.

[@jenahammond111]

I’ve been trying to fix my machine for the last 3 hours! Finally found you and it’s fixed in 1:02 minutes! Thank you!!!

[@Sewinggold]

You're welcome!!

[@madhupathak3329]

Thank you so much sir I really had to fix my machine but I didn't know how to. Your video saved my time 😊🙏🏻

[@Sewinggold]

You are most welcome

[@fanficmarie5189]

Thank you very much. Just got an industrial 8700 and this was great information as the foot lever needed tweaking for optimal performance

[@naseeharizwan3662]

Thank you so much. I was struggling to fix it over an hour.

[@Sewinggold]

You are most welcome.

[@fredaibe7352]

Thanks Steve, this video just helped me fix mine . I am always calling and paying for it to be fixed, but I wonder what makes this problem frequent for me.

[@bearscritter]

THANK YOU SO MUCH! My husband was able to fix my m@chine with your awesome video!!! 💜💜💜😬

[@omalejoy2591]

Thank you, you’ve helped me alot.

[@stitchthisditchthat259]

What if the presser foot isn’t raising while sewing?

[@motherofhens555]

I have the same problem. I removed all the screws from the front plate but I'm unable to get it off-any suggestions? Your videos have helped tremendously !

[@borge2014]

Super helpful! great teacher!

[@KellyDannemann]

Awesome video Thank you, another great thing to learn to add to industrial machine repair, know how.

[@NowfiyaJeshmi-yv5gv]

Thank you very much ❤❤❤

[@amitalalgi1988]

Thank you so much.

[@josephinehardenberg6295]

Thank you very much

[@bharathkumar7913]

Really it's helpful for me thank you so much 😊

[@Sewinggold]

Most welcome 😊

[@crazycooking2455]

Thanks bro

[@Sewinggold]

No problem

[@AnitaBenko]

Do you have a video: how to replace On and Of switch box? On Juki DDL-8100e

[@user-ry8tc3jy3h]

Thank you

[@elementgypsy]

Thanks

[@priviladgechikwengo5412]

My hand lifter is making a 360° turn in any direction and it rises just a little bit. How can I fix it

[@Anr...]

Thanks ....

[@jinnytripp9940]

I'm having issues with my presser foot...I've used the top and made it all the way down and i still have like a quarter inch clearance from my foot too feed dogs..i have a juki ddl-555

[@shahidansari1751]

good

[@rasoulbutler276]

my knee lift is not picking up my pressure foot. It just goes all the way backward then clicks and stays stuck in a horizontal position. I thought I needed to tighten it but that doesn't help

[@ruthleovernizer8479]

Thank you ☺

[@StevenSievert]

Amazing thank you!

[@catherinehecker2682]

I have this exact problem on my machine but I can't get the face plate off in order to fix it. I have removed 3 screws and I'm pretty sure thats all of them but it feels like its glued on. Any advice on what I can do?

[@jenahammond111]

Hopefully it’s fixed by now! My machine had the same problem today. I removed the screws and the end cap wouldn’t come off. I got a small chisel out to pry it off. The gasket had sealed it on. Went back on just fine.

[@catherinehecker2682]

@@jenahammond111 yes I had to do the same! but its fixed now no problem.

[@ccreel64]

Thank you!

[@DasiaRoseCollection]

My foot moves when I touch the back pc to lift it but not when I use the knee lift

[@christinamackay47]

Tried to unscrew the needle in the middle, but the silver clip won’t move. How do make move down

[@kodyphillips816]

Had this problem just a few minutes ago. I just used my screwdriver to give an an extra push down and it worked. Put some elbow grease into it

[@dancingdiva90950]

Do you also have a video for the singer 20u professional (made in japan) with the same problem?

[@ymrelang]

Thanks!!!!

[@tracybuenrostro9126]

Can a device be added to the juki 8700 to lift presser foot with foot pedal? Can an auto trimmer be added to this machine?

[@hodaessai4077]

Hello, I do the same problem on singer sawing machine it's not the same part,please if you can help me , really..I appreciate it very much

[@briangeraths7906]

Can someone tell me how to get the side of the machine off as in the video? I have undone 3 screws, one at top and two at the bottom (one near front and one near back of machine). I have tried putting a knife in the join but I can’t get the side of it off? I was adjusting the foot pressure screw on the top of machine, and it came all the way off, letting the spring inside fall somewhere - need to get into the machine to retrieve it.

[@julianaeniwoareke5386]

Thanks. But mine is Emel and has slight difference in the middle nut don't know how to loosen it, cause it's own has no nut inside what do I do

[@ZivTelem]

How did you open the service door? Please help!

[@sway--designs]

Help my spring is all out help what do I do

[@songshu6557]

Will it be the same fix for DDL 8700-7? Thanks

[@zehcnas1008]

My presser foot is stuck in the up position. How can I fix this?

[@OviroyeTippa-hs7yd]

Pls my foot is already up,so how do I bring it down

[@KenethMontealegre]

My machine does a weird grinding noise inside when I sew at a certain speed! Im not sure what it could be. Any ideas or recommendations? Thank you :)

[@Shanvle]

What is the best way to contact you all for questions on products you offer? I tried the website but haven't heard anything yet

[@jos.4276]

Call him. [phone]

[@marya5254]

Thank you