Juki DU-1181N sewing light, medium, and heavy fabrics

[@Иван-м1ь7о]

Спасибо! Очень интересно! 🤘🏻😜👍🏻

[@Sewinggold]

Thank you for watching!

[@Zullala]

Thank you for this overview! I'm looking for a machine that can sew through 4 thick layers of plush, faux fur. I was also considering the 1541, but it's like $700 more and while I do plan on sewing leather eventually maybe it's overkill for what I need, as it appears this machine can sew through some types of leather as well. I suppose anything thicker then I'll sew by hand.

[@farhadfadayi7389]

thanks for great review. am planning to buy this sewing machine. may I ask what is de different between DU-1181 and DU-1181N? thanks in advance.

[@Nclk619]

A good press on the light weight fabric will look great

[@philippawarner294]

Brilliant could you now do it on a smaller piece of leather please :o))

[@tamarajones2009]

You are a highly recommended store. I am a bag maker and I use mostly cotton canvas, vinyl (light and thick), waterproof canvas, waxed canvas and cork. I may use light leather in the future. Would this machine be for me? Also, do you recommend a needle positioner in the machine? I’ve never had a machine without one but I know industrials are different.

[@FranklinQuijote-ev1up]

Hi Steve I’m looking forward for my project. for leather ,jeans and canvass?

[@laurenking1079]

Hi, I purchased a Juki DU 1181N the stitches on the bottom of the fabric are great. The top stitches on my faux leather fabric are showing loops. When making a box on faux leather the top stitch corners are not square. The stitches under the bottom of the fabrics looks great. I'm using a 4 stitch length, 135 x 17 (DP x 17) needle and I also tried tightening the tension. Can you provide me with other things to try? Thank you.

[@nancycarr8569]

Hi! I'm having tension issues when transitioning from 4 layers to 6 layers. The thread on the bottom of the strap ( only in the thicker part ) looks loopy. What could be the problem. Thanks for your videos. They've been very helpful!

[@Sewinggold]

Watch this. kzbin.info/www/bejne/iGiplYOwrM2fetk

[@marthahumphrey3849]

I just received my Juki DU-1181N and I love it. The hand wheel seems tight to turn, is that normal?

[@Sewinggold]

That could be the motor. Please watch this video: kzbin.info/www/bejne/q3q8m2ZoiZt8Y8k

[@roothespa]

Press the foot pedal lightly as you turn the wheel. I hope that helps.

[@1Heimat]

HI there, I just found this video because I am looking for a machine that is good for making bags, wallets , purses etc. ! I would like to use leather, faux leather/vinyl, cork, jeans and so on on the outside and (because of the nature of bags making) also multiple layers of cotton fabric etc on the inside. Which machine could you recommend for this kind of sewing?

[@nevespaula3460]

Bonjour j'ai une Jack H2 mon pied de biche est un peu dur et grince comment puis je faire pour qu il soit plus souple ? Thank you very much

[@Kindlyone777]

What size thread do recommend for denim? I have size 18 and 21 needles. Thank you

[@corteltube]

I have a Juki 9000c…have had Ddl 5550N. I make costuming. Getting into making bags and other items. Love them both…but is this machine (1181)heavier duty than those two (9000c and 5550)….or is it just the walking feature that is the difference?

[@bnanadolphin3800]

I have 9000c and only sew bags. Im thinking about this machine too. Im a bit struggle sewing thick fabric using the 9000c.

[@patriciakoester5495]

When sewing thru all that vinyl, what thread and bobbin thread were you using?

[@xeniaendris3010]

Hi was wondering were u are located I am in Arizona and I am thinking of buying a Juki for medium fabric like blankets curtains towels that kind of material. Thank u would u be able to ship thank u so much I really love ur videos ❤️

[@Sewinggold]

Hi Xenia. We are in Chicago, IL. Here is the link to the machine on our website. We ship to Arizona. sewinggold.com/product/juki-ddl-8700h/

[@lisasapaugh7485]

Does it sew leather?

[@sheilaroch5548]

For leather, pvc, pu , canvas tq

[@sheilaroch5548]

Hi can I use size 18 needle tq

[@philippawarner294]

Would you recommend this machine for curtains, blinds and loose settee covers with piping ? Thank you for your time :0)

[@Sewinggold]

As long as they are medium weight and above. If they are sheer, a standard DDL-8700 would be better.

[@LenaMellow]

Thread cutter?

[@raylow304]

Hi, whats the different usage of a triple feet where the needle foot walks vs top & bottom feed where the side foot walks like yours?

[@raylow304]

@@AJNoon wow u have the fastest respond of all time!!! Bravo!!!!

[@jadengomez6613]

Is this machine really good for upholstery such as 2 half inch foams and vinyl

[@Sewinggold]

Only if the foam can be compressed under the foot. The presser foot lift is a bit more then 1/2".

[@waylinnthompson5975]

How does an 1181 compare to a 1541 I’m contemplating which one to buy and want to know the comparison

[@Sewinggold]

The DU-1181N is a top and bottom feed machine and the DNU-1541S is a compound feed machine. The DNU-1541S is more heavy duty too.

[@iloveviewstudio]

the reverse stitch of my DU 1181 is shorter than the assign length., the forward stitch is correct.. is that normal?

[@skutovr]

Make sure to press the reverse lever completely to make an equal back stitch.

[@iloveviewstudio]

@@skutovr im sure i press the lever completely, its always half shorter than the forward stitch..

[@stitchthisditchthat259]

@@iloveviewstudio that’s adjustable

[@iloveviewstudio]

@@stitchthisditchthat259 how to adjust? The reverse stitch length

[@karencrossland9272]

How do you get the pressure foot to stay in up position to wind the bobbin?

[@Sewinggold]

This is a video we made for a customer with a different question, but it will answer your question too. kzbin.info/www/bejne/iX6UhXdtpZ6BadU

[@Kristinford]

When I purchase this does it come with the table and assembled? Also can I request bobbins and special feet that may be needed?

[@Sewinggold]

We send our machine in 4 boxes from our Chicago shop. It does require assembly. We drill all the holes except the 2 for the bobbin winder. We send you links to our setup videos. If you want it shipped out with an assembled stand, we can do that too, but shipping is quite pricey because it ships by freight instead of UPS Ground. We do sell accessories too. You can request them and we can invoice you for them or you can call us. Thank you!

[@Kristinford]

@@Sewinggold OK, I would need the easiest set up possible. My husband passed so I’m going to go at this alone. Is there a video on your KZbin channel that shows all the presser feet that come with this industrial machine and any accessories I may need for a bag making business?

[@Kristinford]

One more question, as for now I do not so with leather but my ultimate intention is to do so so would you recommend I go with the 1541?

[@stitchthisditchthat259]

@@Kristinford did you get a juki?

[@Kristinford]

@@stitchthisditchthat259 yes i did and I love it. Steve has been absolutely amazing with customer service and very informative instructions were sent to me with the juki to make sure I was able to assemble it and start sewing the same day.

[@marthahumphrey3849]

Does the oil leak on the fabric or floor?

[@Sewinggold]

The oil should not leak on the fabric or floor.

[@bobjensoddsandends8895]

What needle do you recommend for faux leather/vinyl?

[@Sewinggold]

135x17 or DPx17. They are both the same needle class.

[@gnelsonphotog]

You mentioned adjusting the presser foot pressure to alleviate marks on the fabric. I've had this happen with my DU-1181N when sewing super glossy vinyls. How exactly do you do that, and will it mess up the stitching? My tension is good, so I've been hesitant to touch any other knobs or settings.

[@Sewinggold]

There is a silver thumb screw on the top left of the machine. Turn the thumb screw counter clockwise to reduce the pressure on the foot.

[@gnelsonphotog]

Just the white one, or the big black one too? I loosened both.

[@Sewinggold]

You can loosen both, but do not loosen the black one a lot.

[@gnelsonphotog]

Woooooooops... I did. I'll put it back to the way it was and just loosen the white/silver knob instead.

[@johnq.public2621]

:)