Jumper T16 Pro V2 oops oh no L9R!

[@DavidReynolds-kr6yh]

That beginning was hilarious, I laughed especially when you poured the dettol over the package. I’m sure that once you update the module you’ll be able to use it.

[@TWSreviews]

Already sorted. Have a look at one of my newer videos, I have updated the firmware. I am going to use the FrSky module though.

[@DavidReynolds-kr6yh]

Team Wooly Sheep Reviews , shame that you have to do that, I updated my jumper t16 to the latest version and I’ve had trouble with it, so I’m going back at least 1 update, and hopefully that will sort it out, if not I’ll go 1 more.

[@wycliffeb]

Brilliant intro. As always jon has produced a fun informative film.

[@flyingrock6381]

Always such good and uplifting videos! All the best! Cheers

[@arlemooldijk1595]

Your video was a bit too quick, no need to buy a module for it. You just need to update the firmware of your Multi Protocol Module, see github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases or downloads.multi-module.org/. L9R is now supported!

[@SubashSinghscooby]

I have the same comments.

[@gregc6661]

Not sure if it’ll help but have you tried adjusting the frequency tuning and seeing if those receivers will bind after doing so? The frequency tuning setting on the T16 comes set at 0, I’ve had to change this to -25 or so and then some of my receivers bound without any problems. After binding tune the frequency to the mid point, there are other videos on KZbin that cover this procedure.

[@kkuenzel56]

Don't know if this is the same problem you're having but I bought one of the first T16s with the external multi module. I bought a Frsky D8 compatible receiver, two of them and neither one would bind to my radio. It would act like it took the bind from the transmitter but after cycling the power, it was not connected. I updated all of the firmware to the latest version. Long story short. I ordered one of the internal multi modules, installed it and Voila! It worked. Apparently the external module was faulty. It would bind to other protocols but not Frsky. Hope you get it straightened out. Stay safe!

[@Barbaric_Iron]

Looking forward for the crimp tool video, just bought the blue one! Thanks!

[@thomasvelsvik7423]

Fantastic good and funny video. I have this transmitter and am very happy with it. I have read that it does not work so well with uhf modules.

[@TWSreviews]

Thomas Velsvik they apparently have added filtering in this version. Apart from the L9R issue I think it’s a great transmitter for the money

[@Barbaric_Iron]

That's what I do to my mail, great video bro.....be safe!

[@defendermods9420]

Horus x10 I have one brilliant controller.. I love your video's keep them coming be safe..

[@TWSreviews]

I really wanted the X10 but struggled with the price and this transmitter is an interesting alternative at only £139

[@defendermods9420]

@@TWSreviews price is high but the jumper wasn't out when I bought mine.. Keep the videos coming they are the best..

[@SubashSinghscooby]

No need L9R module at the back, update the latest internal multi protocol firmware which now supports L9r.

[@marcilaferraz4945]

Good afternoon. I'm looking to buy the radio, but I can't find the value of the power in mw of the original module of the T16 Pro V2. Can you help me?

[@TWSreviews]

I have looked it up and is 100mW Check link below: www.rcgroups.com/forums/showthread.php?3301299-Jumper-T16-Owner-s-Thread-%282-4G-16CH-OpenTX-Multi-protocol-Radio%29/page264

[@EnglishTurbines]

I have just one L9R Rx....EZUHF...R9M...You will need the external XJT Module for sure...The Multimodule ain't up to it TBH..I can see why you like the T16 though feels slim in your hands, I like that.

[@spyder000069]

Don't need the xjt. With the new firmware the internal module flys L9R fine. I have already flown at some pretty good range with it. I will say the xjt puts out more power than the internal module. The internal module you need to upgrade the wire inside from the module to the antenna connector. It boosts it from some where around 58 mw to more like 95 mw. I am prettery sure the xjt still puts out a little more than that. But you can always make up for that by using a directional antenna.

[@daviddorney6233]

Love the videos mate!

[@henvan8737]

Too bad you purchased an obsolete radio now it's the T18. Lots of people at our field are having lots of reliability issues with T16. Next time purchase a proper radio that will be supported.

[@TWSreviews]

Very true. I think I will give it to my grandson. I am waiting for the new FrSky X11 with dual frequency. I will review that for sure.

[@oliverli2000]

Does it work with the multi module firmware 1.3.1.77? It is written on the protocol number 67.

[@TWSreviews]

Have a look at one of more recent videos kzbin.info/www/bejne/aWbGmZh9aqxqqqc 1.3.0.91 is currently the version I have and can confirm from that version it supports L9R so your version should be ok.

[@wellingtonsobral6678]

meu Jamper 16 pro acaba de chegar mais RX x8r nas versoes v2 nao binda decepçao .. to muito triste

[@DavePinnock]

Great intro! Could you try the Jumper with the EZUHF module in it and powered on? I've seen there have been issues with the Jumper when having a UHF module plugged in the back

[@TWSreviews]

Dave Pinnock apparently they have added filters. I will try it but won’t be for a while

[@DavePinnock]

@@TWSreviews no rush, I'm not going to be doing any flying for a while!

[@blackbirdboy1]

Loved the Intro.

[@kwaaaa]

latest firmware supports L9R :)

[@TWSreviews]

kwa Thanks I have downloaded and installed. I will post an update shortly.

[@littleappleseeduk]

-6:07 fave comedy moment 🤣

[@janicebradbeer9874]

Luv it 🤣🤣🤣

[@CRAIGBYRD1]

Over here on the USA we just use tbs crossfire. Over and done. Good for 5k or 30 k and receivers are 1/3 the size and a little cheaper than frsky so what are you waiting for. Just get on the tbs. Train and have no more worries. Lol

[@TWSreviews]

I'm catching up slowly....lol

[@KelkieFPV]

firmware on rx is out of date mate.....lol

[@KelkieFPV]

radiomaster tx16s

[@nickmarangelis2251]

Have three Taranis radios, bought the latest 2019 and it won’t bind with most of my Frsky receivers. Frsky have messed things up and lost me as a customer. As soon as I see more reviews on the T16 and it being a reliable replacement I will switch. Frsky you are a disappointment to the hobby...

[@matthewthorp]

github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases/tag/1.3.0.87 Now L9R is supported

[@EnglishTurbines]

The RF from your EZUHF Module will wreak havoc with your T16...it's not screened well enough...Sorry...Oh, and dump that LBT bollocks, we have left the EU and it's inferior firmware....lol.

[@spyder000069]

To fix that you open the radio and use copper tape and line the rear cover with it and then solder a wire on the copper tape and attach it to ground( you can use the ground at the battery in jack). I fly both dragon link at high power and crossfire and my units work fine after this mod.

[@EnglishTurbines]

@@spyder000069 Yes, The Pirate demonstrated that fix...

[@spyder000069]

@@EnglishTurbines The mod goes way back to the original taranis and ezuhf. The taranis would exhibit ghost button presses and heavy noise on the speaker.

[@贺喜-f6e]

kao sa diao ,not dong bingdu make by usa.

[@TWSreviews]

我用酒精清洗 謝謝 注意安全

[@Hawk7886]

Your amateur griping is misplaced. Don't hate on Jumper for your own failures: Ultimately, it's on other companies trying to lock this shit out. When you figure out how to do this properly, I hope to see a proper update video.

[@TWSreviews]

Thanks for the comments. I think you misunderstood but have complimented the radio consistently. My failings??? My findings! Just like lots of others. It’s not only about quad flying. What I am wary of is the multi-protocol unit. I have done three videos and my conclusions are for me to stick with the FrSky module for reliability with my long range L9R receivers. Time will tell if the radio is doing well. You get what you pay for in this life and very often the corners cut are to our models detriment. Yes I am an amateur. I don’t make any money doing this, I don’t get any free stuff but have a lot of experience that I share as part of my hobby. Some will like it Some won’t Thankful I have a real job....lol