Hi Jumper Man. Enjoy your videos. In this one, I noticed you did not change the drain spout on the reservoir to the clean position. There is one screw to remove, then you turn the spout down and reinstall the set screw. This allows the reservoir to drain completely when the reservoir swings down in the harvest position. It really helps to flush out things and helps to prevent contamination of the first few batches of ice. If you don't do this the reservoir remains partially filled with your cleaning/sanitizing liquid.
@aungthiha5050 Жыл бұрын
Love watching your videos. Another good channel to watch.
@stevencossaboon3237 Жыл бұрын
Great job Jumper man.
@zekenzy6486 Жыл бұрын
Great Video. Nice Work. Good Job. Thank you for sharing
@sherwinalvarez7365 Жыл бұрын
That was me on Bowery when you were making the left.
@JumpermanTech Жыл бұрын
That was so awesome earlier!! Seriously, it got me hyped 😂 It was great to see you. You been an active supporter of the channel. Very much appreciated 🙏 God bless🔧⚡️
@sherwinalvarez7365 Жыл бұрын
@JumpermanTech Same to you brother. Thanx for the great content. Always look forward to your videos on the weekends.
@lowrybrock8272 Жыл бұрын
Very interesting video. I always enjoy your videos. Got a question, is it a good idea to blow dust around the kitchen like that? Keep making them and I’ll keep watching them. Be safe lefty.
@andygaudet Жыл бұрын
Everyone does things differently. When I do coil cleanings for ice machines I do the same procedure but instead of blowing it out with air, I get everything wet using a non-acid coil cleaner.. let that sit for a bit as it works itself into the coils and loosens any debris then spray down with warm water. Run a small vacuum immediately which will suck up dirty water instead of dust. The coil cleaner gives additional layer of protection to coils to help prevent dust from sticking easily.
@cuongnguyenxuan2479 Жыл бұрын
Thank you, hope you continue to make more good videos
@scottmaz4063 Жыл бұрын
Love watching your videos, you do really great work.
@thesilentonevictor Жыл бұрын
Satisfaction clean ice machine for customers to use 🎉jmt
@timothyripley417511 ай бұрын
Awesome man, I got these at my work and they need some love haha
@SULK8111 ай бұрын
Put some plumbers grease on the filter o- ring , it works wonders on removing. You also might want to upsell a scale inhibitor filter.. just saying. As always another great video!! Happy New Year 🎉
@andygaudet Жыл бұрын
Good video! That's an older ice machine that I haven't ran across yet.
@supremeaircomfort165 Жыл бұрын
Another one jump!! I need to come join you out there!!
@maheradous9257 Жыл бұрын
Your finger is ok .Feel better 😮
@zainshah01 Жыл бұрын
Nice buddy love from pakistan
@726scooty Жыл бұрын
Hey man… I have a few friends that have restaurants and I’d like to help them with their units. Where can I read up on these more and find out more info so I can possible help him with repairs and clean properly and maintenance the unit … thanks
@296956611 ай бұрын
Hey, How much is full cleaning?
@TeamWagy9 ай бұрын
I find it funny that this is the 2nd video I’ve found where the thumbnail is a manitowoc ice maker😂
@christopherlucas6209 Жыл бұрын
A+++
@chrissipple1018 Жыл бұрын
sHoshizaki's answer to Kolddraft ice makers. If Hoshizakii is still using stainless steel on the evaporators you don't need nickel safe cleaner. Just use Hoshizaki cleaner.
@eddevoe2519 Жыл бұрын
The KM series haven't changed much, still water hogs. The machine in vid has a nickel coated evap. AND WHY DO THEY HAVE THE LEDS NUMBERED LIKE THAT in the KM series?. I even asked tech support and he laughed and couldn't answer, lol.
@thesilentonevictor Жыл бұрын
Is that jmt mechanical Corp air condition and refrigeration specialist lol
@frankspliff7037 Жыл бұрын
Was it making ice as dirty as it was
@antoniobaez6282 Жыл бұрын
You are supposed to be wearing those Jumperman tech gloves! 🙄 💯
@antoniobaez6282 Жыл бұрын
What, you don't drink ice 😮
@antoniobaez6282 Жыл бұрын
😅
@ILoveKittys78 Жыл бұрын
💚😻
@AngelHVACR Жыл бұрын
Going to have to buy that air compressor , usually just use nitrogen
@swanjaymusic9 ай бұрын
That was fun to look at...lol..
@armandotorres626 Жыл бұрын
Fancy mechanics on that ice machine... Never seen that style before
@eddevoe2519 Жыл бұрын
Modeled after a KolDraft.
@nicolerennie Жыл бұрын
🫣🫣🫣
@hindiabbas6984 ай бұрын
Hallo... Im from indo.. i want to ask you about setting ice maker over thin.. and about code code on screen for setting . Thank for your answer . Can you give me your number.. for sharingbmy problem about ice maker machine
@scottmaz4063 Жыл бұрын
Love watching your videos, you do really great work.