“The Unfinished Abandoned Project” - 1,000hp Toyota Drag Supra Model Car Build - 1/24 Tamiya

Tamiya Toyota Supra: amzn.to/4ah5YDP
Hi guys, in this video I will be building an abandoned, barn find, work in progress, dusty & rusty unfinished project sleeper Toyota Supra drag car in 1/24 scale. Enjoy!
Wanna show some support for the channel? Grab a set of mini RB26DETT engines on my mini web store at junsminigarage.com. They are currently on sale!
3D files were purchased from cults3d and printed with Creality Halot One.
Front lip: Scalemakina
Hood: Blackboxstl
Engine and Drag Wheels: Zerofactoryscaledwork
My other videos-
1/24 model car full builds - • 1/24 Scale Model Car F...
---All the tools I use to build my model kits are listed here:
Model Building Basic Tool Set: amzn.to/2ElHtMh
A3 Cutting Mat: amzn.to/3t8GmUP
Tamiya Side Cutters: amzn.to/3z643lt
Tamiya Hobby Knife: amzn.to/3aJRTmx
Drill and Micro Drill Bits Set: amzn.to/4bBJxtV
Panel Line Scriber:
Tamiya Plastic Scriber II: amzn.to/34cDrRu
Trumpeter Panel Line Engraver: amzn.to/2TFD1MX
Scribing Pen with Guiding Tapes: amzn.to/3hPZQe7
Glues:
BSI Super Gold+ Glue: amzn.to/31aNVPb
Tamiya Extra Thin Cement: amzn.to/2SbDC8A
Elmer’s Clear Glue: amzn.to/3jfoEKD
Sand paper:
600 - 3000 Grit Sand Paper: amzn.to/32aryZJ
Micro MESH Soft Touch Sanding Pads: amzn.to/33eik0h
Painting:
Airbrush Kits with Compressor: amzn.to/325JHb8
Dual Action Airbrush: amzn.to/34brtrn
Tamiya Painting Stand: amzn.to/2Q7h8UX
Airbrush Cleaning Station: amzn.to/329T8WL
Paint Brushes for Hand Paint: amzn.to/3aGwPvU
Tamiya Acrylic Paint Retarder: amzn.to/33hrkln
Paint/Fluid Droppers: amzn.to/32aizHZ
Alligator Clips: amzn.to/3kWm2T0
Paint Mixing Jars: amzn.to/3g855RP
Primer:
Tamiya Grey Primer for Airbrush: amzn.to/30okush
Tamiya White Primer for Airbrush: amzn.to/3cLdxXb
Spray Can Grey Primer: amzn.to/2GgnKPF
Spray Can White Primer: amzn.to/2ScNRJB
Thinner:
MR Hobby Lacquer Thinner: amzn.to/3n5dFpa
Tamiya Acrylic Thinner: amzn.to/34ens3T
Tamiya Enamel Thinner: amzn.to/392nv6P
Masking Tapes:
Tamiya 6mm Masking Tape: amzn.to/348XezD
Tamiya 10mm Masking Tape: amzn.to/3ibshj7
Tamiya 18mm Masking Tape: amzn.to/3igOXOU
Tamiya 40mm Masking Tape: amzn.to/2Oln2EV
Tamiya Masking Tape for Curves(2mm): amzn.to/36mfSXo
Tamiya Masking Sticker Sheet: amzn.to/3EGWHFf
Other goodies I use:
TAMIYA Polishing Compound Fine and Finish: amzn.to/2G1X1q1
Tamiya Polishing Compound Sponges: amzn.to/3mBhXVA
Tamiya Panel Line Accent Color Black: amzn.to/2EJlPSQ
Tamiya Mark Fit Strong Decal Solution: amzn.to/3n3D82w
Surgical Scalpels: amzn.to/3dSlMTu
Duck Poster Putty: amzn.to/2Yix37r
Ranger Gunmetal Embossing Powder: amzn.to/2Q6AyJR
Hero Arts Embossing Powder(Red): amzn.to/30kfogI
Milliput Superfine 2-part Putty: amzn.to/2YgExrM
Mini Hand Saw: amzn.to/3mXY1Mt
Hasegawa Mirror Finish: amzn.to/3mXJeTy
GodHand Glass Cutting Mat: amzn.to/3pUtWAG
#toyotasupra #supra #scalemodel #supramk4
Tracks:
------------------------------
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/ian-aisling/new-...
License code: 59ME2WMRRQFUGPSB
------------------------------
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/brock-hewitt-sto...
License code: BFHQ3GIK0MWA1IND
------------------------------
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/brock-hewitt-sto...
License code: UYJYF8NZWHYAKYJD
------------------------------
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/ian-aisling/quic...
License code: SDAADUROJI90FH8T
------------------------------
Other music tracks are licensed from Audiio.com:
"City Life" - Alex Velte
"Blue Deer" - Matteo De Grandis
"Mistral" - Edward Abela
"Embrace" - Atlas Reach
______________________________________________________
DISCLAIMER
Some of the above links are affiliate links, meaning, at no additional cost to you, I will earn a small commission if you click through and make a purchase, you are not obligated to do so, but it does help fund these videos in hopes of bringing value to you.

[@scaleffect]

Outstanding work as usual. The little details to the weathering like the heart in the dust really set this one apart. Some photos of this build alongside your project car AE86 would be cool to see on Instagram or something. Thanks for sharing all your hard work and expertise as always!

[@JunsMiniGarage]

I will definitely put them together and take some photos since they have similar characteristics. And thank you very much for watching my videos.🥹

[@flint707]

Unbelievable craftsmanship

[@johnnoob]

i love the storytelling that goes into a build like this. and the end result is top notch as always.

[@plrplm]

with this music, it feels like the whole word depends on this build lol. great build, as always!

[@Car_Dorito]

This...this is just a master peace!

[@tenacimortis3016]

Your work is always so fun. I think it would be really cool if you did a series where you built an abandoned car and then a series of models after that showed a restoration process. Almost like snap shots of the car being brought back to life.

[@JunsMiniGarage]

Thank you very much. That’s an excellent idea.👍

[@ScaleAutoGarage]

It is amazing what 3D printing has done for the model building hobby. So many more options for custom work now and easier to obtain. Great work on this and so much creativity.

[@JunsMiniGarage]

Thank you Spence. Yeah 3D printing opens up tons of possibilities for scale modeling. There is a little bit of learning curve but once you get over it, it is all fun from there(except when the prints failed or you accidentally tipped over the resin jar and got resin all over the floor.😩)

[@ScaleAutoGarage]

@@JunsMiniGarage ah man, I can only imagine trying to clean all that up!! The loss of all that resin would make me cry. 😅

[@CarNerd7]

Holy shit!! what an absolutely beautiful build and video!! amazing job as always Jun, love the attention to detail!

[@JYAM101]

The rust affect on the hatch was absolutely amazing! Great work, keen to watch more of your work now. 😋

[@douggoins2960]

Definitely one of my favorite model car building channels on KZbin. I plan on doing my first one sometime this year

[@_ford_crown_victoria_p]

even if Jun were to build a pontiac vibe I’m still watching

[@kevinu6004]

Awesome work.... what a symphony of ART!! ❤👏

[@JunsMiniGarage]

Thank you very much.🥺

[@TheJhine5588]

❤❤❤ absolutely beautiful!! Great work!

[@unclesweetiesmodelworks]

Jun, that is a fantastic looking build. I love the resin engine and all the detail painting.

[@JunsMiniGarage]

Thank you very much. I am glad to hear that.

[@BillyStrangeAutoModels]

Incredible work!

[@JunsMiniGarage]

Thank you so much Billy.

[@marsgarage8217]

Beautiful work, I love the weather look.👍

[@JunsMiniGarage]

Thank you very much.

[@businessaspect218]

Outstanding 😮

[@cossiefordman720]

The godfather of model cars strikes again!

[@georgeb2616]

What a brilliant video, the actual lfilming of the build and your commentary all great, but the music through out was fantastic. Thank you for sharing. 😊

[@JunsMiniGarage]

Thank you. I am glad you liked my music choice.❤️

[@cs2358]

IS THAT A SUPRA!!

[@LakelandMusic]

YOOOOO (cleans glasses with window wiper) IS THAT A SUPRA?

[@kurosakitagami2788]

No

[@giothestupidass4136]

Its a shitbox

[@user-lm4nt2qk5b]

WITH A TURBO?????

[@grooveholmes79]

awesome as always. I've always wanted to do a rust bucket build but have never done so yet. I need to try it

[@JunsMiniGarage]

Thank you. And definitely try some rust bucket builds or any weathered builds if you can. It’s different but it’s also a lot of fun.

[@thelegacyTYT]

Jun-Senei never fails to amaze me❤️

[@TJHahn624]

Awesome work sir!

[@JunsMiniGarage]

Thank you very much.❤️

[@jacksupraman8163]

Che spettacolo 😍

[@drafting5652]

Thats awesome nicely done thanks for sharing 🙂

[@JunsMiniGarage]

Thank you for watching.❤️

[@AdHocCars]

Amazing work! I am in the middle of building Toyota Supra GT the TOM's version, there are so many tips in your video! Thanks a lot :)

[@JunsMiniGarage]

Thank you. I am glad my videos are helpful to you.🙏

[@capyyy-_-]

beatuiful, qualty work, and i always love your vids. i do prefer no commentary however. can you try doing non stop streams of the entire process?

[@davegoose]

I love your videos man!

[@JunsMiniGarage]

Thank you Dave.🥹

[@raykreations2602]

Awesome job!

[@JunsMiniGarage]

Thank you very much.

[@-DEATHSTROKE]

I very much enjoyed this

[@Trejoo]

Nice work!

[@JanKoneczny]

Love this type of projects.

[@KarlScaleModeling]

Awesome work 👍🏼 that's very nice and with all those 3d printed parts that you've added, it has become super realistic. Well done 😊👍🏼

[@JunsMiniGarage]

Thank you very much Karl. ❤️

[@lincolnbassett400]

This was a great video thank you 🙏

[@JunsMiniGarage]

Thank you 🙏

[@NakamuraZenki_]

Great details. Amazing craftmanship. Although, if it has a flat tire (somehow) it would be a perfect barn find. But, nonetheless, this is perfection of a build.

[@chaosvii9459]

Tip for 3d print change inclination in the slicer. I love your videos❤

[@JunsMiniGarage]

Thank you very much for the tip.🙏

[@user-kd8qk8jc3c]

It's amazing 🤩

[@AydensAnimations]

Looks soo cool!!!!

[@domino3d16]

very nice project :)

[@mayhemgarage80]

I really need to get some of those Tamia kits, they look so detailed

[@Spookeyo]

Sweet build! A tip for the resin prints - before you cure them, place them in lukewarm water so you can remove the supports with ease (no snipping required), thanks to @UncleJessy for that! and then cure the parts.

[@JunsMiniGarage]

Thank you very much for the tip.🙏

[@modelcars2978]

Masterfully done!🤓👍

[@JunsMiniGarage]

Thank you so much.

[@thathobbyguy6774]

I love these project car type design you started building. Very very beautiful work as always. Would you try the MK2 Toyota supra from MPC or tamiya next pleasee? White paint with a blue interior? Would mean a lot to me since I had one that I miss a lot

[@michaelQuiambao2020]

Dont Hate the Supra Hate the Supra Kids

[@RICE_1700]

その通り

[@Mayank_Maximum]

outjerked by jun-civic eg 1/24

[@MrWinnster]

If you print the bonnet vertically it'll take a lot longer but will need less supports and will reduce those contour style layer lines you had to sand out

[@JunsMiniGarage]

Thank you so much for the tip. I will keep that in mind.👍

[@user-zd4id2hk1x]

はじめまして😮カッコいいですね😃

[@hobbyrobby]

Great project Jun! The engine turns out to be an awesome show piece! Funny enough I am working on a Supra project already that has some similarities to yours :)

[@JunsMiniGarage]

Thank you very much Robby! I can’t wait to see what your new project is. I already know it will be amazing.😍

[@JG-Toy]

interesting project👌👏

[@DragonBallSeriesYt]

Hello

[@JunsMiniGarage]

Hello.

[@yusnizayusof9942]

sypeeeeerrrrr❤❤❤❤❤❤😅

[@user-zi2gb7rd9s]

Очень круто работа! А как у вас можно приобрести 3d дополнения для этой модели? Или файл для печати!?

[@MRBlackbird13]

This ist awaesome and also so sad. But the only detail what kind of destroing the look is, that the tirese should be flat ^^

[@JunsMiniGarage]

Thank you so much for the great idea!👍

[@DominicMartel-jl4ix]

U don’t need to have any exhaust just make it exhaust headers with no exhaust pipes

[@abu7asoni244]

✨ART✨

[@Pro88teC]

Maby next time do the tires as flat tires.

[@JunsMiniGarage]

Great idea. Thank you for the suggestion.👍

[@Pro88teC]

@@JunsMiniGarage thanks. Rally like this build.

[@thecodex7701]

“Pop the hood”

[@szmulen]

what drillbits and hand drill are you using? theyre not in the description

[@JunsMiniGarage]

Just updated the tool list in the description, it’s there now. Thank you very much.🙏

[@DominicMartel-jl4ix]

U should’ve made the tires look like they are flat

[@JunsMiniGarage]

Thank you for the idea.👍

[@jackdelacourt6093]

Jun will you build muscle cars like the dodge charger and hellcat

[@JunsMiniGarage]

Oh yeah definitely! I like muscle cars especially older ones.

[@jackdelacourt6093]

@@JunsMiniGarage try the revell dodge charger and amt 1970 Monte Carlo if you can do Sean’s Monte Carlo from Fast and furious Tokyo drift

[@JunsMiniGarage]

Good suggestion! I will look into those AMT kits.👍

[@Baksteen4]

what for printer do you use?

[@AliRadaa]

What do you do if your scribe slips and scratches the body?

[@minervapadua9982]

its that a supra butway im supra mark 4 aka im jake hehehe😅

[@hijk3212]

Can u make the Lexus ls400/ Toyota Celsior

[@JunsMiniGarage]

That’s a good suggestion. Will put it on my to build list.👍

[@akiempow]

I own Supra kit for 5 years now, and never opened yet. I donno how to start😂.

[@JunsMiniGarage]

You can do it! It’s not as hard as it seems. Just take your time to build it slowly. 👍

[@Fernweh3]

Здоров! А куда радиатор и охлаждение делось? Ты даже красил его но забыл поставить..

[@wwhy_nott]

радиатор почти незаметно, но вообще его и в багажный отсек иногда переносят. плюс это же проект "заброшенный" поэтому некоторые детали могут быть попросту демонтированы. если присмотреться, то там даже инструменты лежат, как будто автомобиль средь бела дня бросили и забыли.

[@user-zi2gb7rd9s]

Где можно найти файл для 3D печати?

[@AliRadaa]

The worst part of model car building is the impossible polishing 😞

[@hooptastic_hippie8522]

rat rod supra

[@MikeLaRock88]

Amazing job. But in reality, an abandoned supra wouldn't have its 2JZ and $3000 slicks still on 😂

[@bigben8057]

Terrible project