[HEC-HMS #2] HEC GEO HMS|CREATE PROJECT FOR HEC HMS USING ARC HYDRO TOOL & HEC GEO HMS

  Рет қаралды 43,236

Just Learn Civil

Just Learn Civil

Күн бұрын

Пікірлер: 163
@shumixnews7080
@shumixnews7080 5 жыл бұрын
Takes me 4 Days_ faced Various Difficulties but thanks Allah I done It! May Allah Bless You Forever! Thanks Sir!!!
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Thank you very much.
@nareshaadhi7411
@nareshaadhi7411 3 жыл бұрын
I'm getting this error like: "Requried /MustExist Filed:LongestFL_HMS is not found-LongestFlow Path1" in the creation of Prepare Data for Model Export (HMS). Anyway, the filed are added default(LongestFlowpath1 and CentroidalLongestFlowpath1). Can you please clarify?
@lynngacheri4556
@lynngacheri4556 3 жыл бұрын
Hello did you manage? Am getting the same error
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
Keep spatial projection projection data frame same as Projected DEM,it will work
@alvarorojas2021
@alvarorojas2021 2 жыл бұрын
I have a problem with longest flowpaths, it does not generate a proper result. Does the Longest flow path generated by the Arc Hydro tool work, in the watershed processing tab?
@JustLearnCivil
@JustLearnCivil 2 жыл бұрын
Try to enable/disable background processing.
@pujanneupane4942
@pujanneupane4942 5 жыл бұрын
2 weeks assignment in 2 hours, thank you.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Welcome
@landryfakage4014
@landryfakage4014 4 жыл бұрын
Thank you for this very informative tutorial. I need a help on how to fix an error I'm encountering while trying to run bassin model function. The error message is HRESULT E_FAIL has returned from a call to a COM component. Background processing from Geoprocessing option is disabled, and the project pathway directory isn't such long as that. Please, can you provide solution on how to solve this issue?
@hakimhakim-qv7tx
@hakimhakim-qv7tx 5 жыл бұрын
when i am computing the longest flow path, the operation is coming long time more than (30 min) and as not correct. what should i do?
@ngaleegiba7511
@ngaleegiba7511 Жыл бұрын
When using the option stream definition, You have to input the threshold value for the area. But for some reason, I cannot put any value. It always shows put a number lower than the largest basin area. And I am sure my DEM file has basins area up to 200 km square. How do I procced?
@amuronimelda5818
@amuronimelda5818 3 жыл бұрын
Thanks for the video. I was doing a project on my on and the data I was trying to add failed to be literally seen in the folder I had saved it on. I was wondering if you could be knowing the reason for that.
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Which data? Did you use filter all files ( *.*) to search the data? If it is GIS data you are talking about then maybe the data is saved in default location which may be c drive in case you didn't change the save location.
@amuronimelda5818
@amuronimelda5818 3 жыл бұрын
@@JustLearnCivil It's a DEM with file extensions of .adf and .XML......the data was on a flash then but I couldn't see it, so I eventually put it in one of my pc drives..but it wasn't the "c" drive. Are you saying that if I change the location of the files to the c drive then I may see it?
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Open ArcGIS. Click ob add data then navigate to the location where you have saved the DEM. You will see a raster DEM of the same filename. Cilck on it and add it. The DEM will appear under ARCGIS layer. However, when you navigate to the folder in windows explorer, you may not see it. But through ARCGIS, you will be able to add the file.
@amuronimelda5818
@amuronimelda5818 3 жыл бұрын
@@JustLearnCivil thanks so much
@patrickperales1993
@patrickperales1993 4 жыл бұрын
Does not having an area for the stream segmentation affect the result? In my case, the threshold for the area is shaded with grey, and it does not allow me to input an area.
@sisayalemayehu514
@sisayalemayehu514 9 ай бұрын
How to compute the stream channel slope using HEC-GeoHMS extension in ArcGIS please? Is there any videos on this topic?
@elinge_joelvaldez
@elinge_joelvaldez 4 жыл бұрын
Hello, what is the difference between generating the preprocessing with ArcHydroTools and HECGeoHMS? I've seen several tutorials where preprocessing is done with the HECGeoHMS tool and I don't know if there really is anything different. Regards.
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
You can use any.
@ganadeepansubramaniam2575
@ganadeepansubramaniam2575 3 жыл бұрын
Is it possible to do same thing if I have already have the shapefiles? I need to find the hechms processes (scs, modclark and recession) and average slope
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Yes you can strart the process with your shapefile (From this shapefile obtain the pore point). Then follow the process mentioned in the video.
@hunglong8748
@hunglong8748 3 жыл бұрын
Can I know the perpose at 9:39 works.
@olaceloko
@olaceloko 4 жыл бұрын
i`m having a hard moment with slope (Terrain preprocessing), it says i have to define a valid spatial reference is invalid, what can I do? Another question, am i supposed to use projected coordenate systens?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
You need to use projected coordinate system.
@olaceloko
@olaceloko 4 жыл бұрын
@@JustLearnCivil thanks
@warrengabayeron2113
@warrengabayeron2113 5 жыл бұрын
Hello. I would like to ask what versions of ArcGIS and HEC-GeoHMS did you use for this video? Thanks.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Arc Gis version 10.2 and HEC GEO HMS compatible with Arc gis 10.2, which is version 10.
@warrengabayeron2113
@warrengabayeron2113 5 жыл бұрын
@@JustLearnCivil oh okay. Thank you very much.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Welcome Warren Gabayeron
@anupshrestha9297
@anupshrestha9297 5 жыл бұрын
Longest flowpath is not working, Can you please suggest the solution?
@kiritokun5082
@kiritokun5082 4 жыл бұрын
What projected coordinate system did you use?
@aakritideuja3333
@aakritideuja3333 4 жыл бұрын
Hello! please help me. Where can i find the dem and basin boundary data for rapti or karnali basin?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Download DEM from USGS website. You will get data of whole world there. Download the grids of karnali basin by specifying latitude and longitude.
@aakritideuja3333
@aakritideuja3333 4 жыл бұрын
@@JustLearnCivil Thank you for your response. and what about the basin boundary?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
First you must know outlet of basin which is a hydrological station of DHM and using the coordinate of this point delineate catchment from your downloaded DEM. Remember that you cannot download DEM of exaxtly Karnali or other basin. You will get rectangular sheet so you may need to download more than one sheet and merge it in GIS software. Once you delineat catchment, convert it into Polygo which represents boundary of your basin.
@renziegando8579
@renziegando8579 4 жыл бұрын
How did you create your terrain dem data? Can i use dtm instead of dem? Thanks
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Download DEM from online resource of your study area and clip it according to your catchment and use it. I'm not sure about DTM.
@moteherogame
@moteherogame 5 жыл бұрын
plz! HELP!!! When I came to the parameter section----Subbasin Parameters from Raster. My input interface does not have options to input the SCS-cngrid. And it only has three rows, not like yours which is 8 rows. What I am gonna do? I want to input the cngrid parameter in subbasins.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Use ArcGIS version 10.2, if you have other version and HEC GEO HMS for version 10.2.
@moteherogame
@moteherogame 5 жыл бұрын
@@JustLearnCivil Appreciate for your reply but I am using the ArcGIS and HEC-geoHMS for version 10.2 both....That's a really tough question for me..
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
@@moteherogameYou mentioned having only three rows in subbasin parameters from Raster. How many rows appears depend on what options you selected in "Select HMS Processes". Select appropriate option in that step (Parameters - Select HMS Processes) like SCS for initial loss, etc. Then you should see the option to input SCS.
@moteherogame
@moteherogame 5 жыл бұрын
Just Learn Civil Thank you bro. So kind of you!
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
@@moteherogame Welcome. Glad that the problem's solved.
@manalh4232
@manalh4232 4 жыл бұрын
Thank you a lot for the tutorial, if you can help please i got stuck at the last step of the characteristics : centroidal longest flowpath, an error of "failed to execute, re execute longest flowpath and try again" shows. I do so but nothing changes.
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Is background processing enabled or disabled? Please follow steps given in description and see if it helps.
@manalh4232
@manalh4232 4 жыл бұрын
I disabled it, i followed those steps, still not working !
@mindjerichard4883
@mindjerichard4883 3 жыл бұрын
Hello, thank you very much for a very informative tutorial. However, I have calculated the river slope and most of them are negative. I wonder if I am right or wrong? and what is the unit of the obtained river slope? In the attribute table, the calculated river sope is named as "Slp", right or wrong? help me with this, please?
@bibhuprasadmishra4949
@bibhuprasadmishra4949 3 жыл бұрын
same problem, water body have zero slope.
@PREETHYPSMTechWRHM2K22
@PREETHYPSMTechWRHM2K22 8 ай бұрын
Same issue , is anyone found out why it is showing negative values😢
@mindjerichard4883
@mindjerichard4883 8 ай бұрын
Water body is a flat surface right? So, reasonably zero might not a bad value.. just my thought
@sabindangol2779
@sabindangol2779 4 жыл бұрын
while calculating the basin slope it shows the error "ZonalStatistics function might have failed! Run 'Compute Local Parameters' from ArcHydro Tools. Failed to execute (BasinSlope)."
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Is background processing enabled?...Follow steps mentioned in description to enable/disable it. Hope it helps.
@sabindangol2779
@sabindangol2779 4 жыл бұрын
@@JustLearnCivil i have tried by both enabling and disabling background process.. But the problem is same
@sabindangol2779
@sabindangol2779 4 жыл бұрын
@@JustLearnCivil did it again by enabling and disabling..it worked...thank you
@abrahamdeftie2327
@abrahamdeftie2327 4 жыл бұрын
Thank you very much. The question, After river length, can not pass the procedure because the river slop can not be processed. can help me in when case this problem happend.
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Please follow the steps explained in the description of this video
@abhikghosh5279
@abhikghosh5279 5 жыл бұрын
How Can I solve this Problem? I have re-checked my model in ArcGIS multiple times, but I am unable to export the basin model file. While generating Basin model file I receive this Error HRESULT E_FAIL has been returned from a cell to a COM component….. Please Help.!
@landryfakage4014
@landryfakage4014 4 жыл бұрын
Did you solve this issue?
@abhikghosh5279
@abhikghosh5279 4 жыл бұрын
@@landryfakage4014 I did .. I just uninstalled and again installed the software, but I don't know the reason behind the actual problem... I did this because at first I checked the whole process on another computer and it worked.
@landryfakage4014
@landryfakage4014 4 жыл бұрын
Abhik ghosh By software, do you mean you’ve uninstalled hecgeohms tool or arcgis? I actually uninstalled hecgeohms and installed it again but didn’t fix the issue.
@abhikghosh5279
@abhikghosh5279 4 жыл бұрын
@@landryfakage4014 From scratch..ArcGis and hecgeohms....if you are using totally new version of the software then you can try with older versions maybe..
@landryfakage4014
@landryfakage4014 4 жыл бұрын
@Abhik ghosh Thank you for your help... I’ll definitely uninstall both and start the project from the scratch. Hope this will work out. I’m using Arcgis 10.5 and Hecgeohms 10.5
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
In slope processing before the project set up stage ... error is coming that the data set does not have spatial reference ..plz specific.. Please guide 🙏
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
1. Spatial analyst may need to be enabled from extension menu. 2. Try to enable or disable background processing (as explained in the description of this video).
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
@@JustLearnCivil still have a problem
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
Terrain processing > slope> the data set does not have spatial reference.please specify a valid spatial reference!
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
How I can add spatial reference to data set... please help
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Do you have .prj file associated with your DEM file (You can look into the same folder where your DEM file is saved). If not, you need to project you DEM to coordinate of you area.
@kskzzz
@kskzzz 4 жыл бұрын
Hi how did you create subbasin catchment from a delineated watershed ?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Hec Geo Hms itself create subbasins
@dave121594
@dave121594 3 жыл бұрын
I encountered this error when running the catchment polygon tool: Failed to execute. Parameters are not valid. ERROR 000732: Input Table: Dataset C:\Users\given\Desktop\ERDT\Research Implementation\Watershed Delineation\catchments does not exist or is not supported Failed to execute (AddField). Failed at Tue Mar 09 13:47:58 2021 (Elapsed Time: 0.00 seconds) AddFieldGPerror : System.Runtime.InteropServices.COMException (0x80004005): Error HRESULT E_FAIL has been returned from a call to a COM component. at ESRI.ArcGIS.Geoprocessing.GeoProcessorClass.Execute(String Name, IVariantArray ipValues, ITrackCancel pTrackCancel) at ESRI.APWR.ApHydro.GDBHelper.AddFieldGP(ApLayer apLayer, String fieldTag, String& exMessage) Failed to execute (CatchmentPolyProcessing). Failed at Tue Mar 09 13:47:58 2021 (Elapsed Time: 8.59 seconds) Can you help me how to address this problem?
@mohammedjunaid5985
@mohammedjunaid5985 5 жыл бұрын
after fixing batch point,when i select "batch watershed delineation", watershed is being created for only only one sub basin whereas, the others are untouched.. what do i do? please help ...!!
@ozgur3490
@ozgur3490 4 жыл бұрын
Hello Sir , I have basically a problem in terrain processing. I have in part Stream Definition; Number of cells: 114400 Area (square km): 0.0286 Square km (area) is very very low than your project. You think, where am I making a mistake?
@kiritokun5082
@kiritokun5082 4 жыл бұрын
My DEM data is set to WGS-84 by default should I change it to UTM projection?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
WGS-84 is geographical coordinate system. so, project your map in the projection system used in your location. My location uses MUTM (specific to my region). But you can use UTM by knowing in which zone your map lies.
@kiritokun5082
@kiritokun5082 4 жыл бұрын
I'm having error computing the centroidal longestflowpath it says"Compute flow path for drainage area and try again"
@smolkoful
@smolkoful 4 жыл бұрын
how not the saved project with extension .gdb ??
@panchu50
@panchu50 5 жыл бұрын
"Error HRESULT E_FAIL has been returned from a call to a COM component I get this error during the "Catchment polygon processing" step. Please help!
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Try the suggestion in esri community. Here's the link: community.esri.com/thread/89781 Hope it helps. If not, let me know.
@shivakantsingh5886
@shivakantsingh5886 5 жыл бұрын
I am getting Red cross warning while doing for River slope in characteristics. Can you help??
@shivakantsingh5886
@shivakantsingh5886 5 жыл бұрын
when i checked the error it says spatial reference does not have z units, can you please help me out how to resolve it
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Try: go to geoprocessing | option | uncheck a box under (below) background processing which is before "Enable". Try doing this. Hope it solves.
@shivakantsingh5886
@shivakantsingh5886 5 жыл бұрын
Thanks a lot😊
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Welcome
@koshishrajmaharjan
@koshishrajmaharjan 5 жыл бұрын
There's no flow path tracing in mine. It shows 'Missing'. What do I do??
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Which version of ArcGis, Arc Hydro Tool and Hec Geo HMS are you using? Try version 10.2 .
@shamrockcasas8171
@shamrockcasas8171 3 жыл бұрын
Hello SIr, I have a problem in Generating Project. it says "System.Runtime.InteropServices.COMExption (0x80004005)ERROR."How can I solve this, please help me. by the way I'm using ArcGIS 10.7.1
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
Hello I am facing same error
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
How you solve this error
@JALAJDARPAN
@JALAJDARPAN 3 жыл бұрын
It's due to executing files are in different location or you didn't use Projected co-ordinate DEM
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
Sir while checking the data for HEC HMS their are some error occurs that is "river contamination error " please give the solution of this
@sajnatj205
@sajnatj205 5 жыл бұрын
When i am doing the characteristic part, that is longest river,centroid i am get an error.why it is so???
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Could you tell me what errors it showed?
@sajnatj205
@sajnatj205 5 жыл бұрын
@@JustLearnCivil when i am computing the longest flow path, the operation is coming as correct.but doesnot show in table of content or make any change in my watershed. It is not showing any error..but this is happening
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
@@sajnatj205 if there isn't any error message and it shows completed successfully then that file can opened from the location where it saved (shown under "Output Longest Flow Path" when Longest flow path is execute)
@sajnatj205
@sajnatj205 5 жыл бұрын
@@JustLearnCivil ok let me check and let you know..thank you for your replay. If i have any doubt can i contact you. If you dont have any issue provide your contact information
@alfisalamghifari4486
@alfisalamghifari4486 6 жыл бұрын
I got this error at start new project "Error HRESULT E_FAIL has been returned from a call to a COM component" what should i do??
@JustLearnCivil
@JustLearnCivil 6 жыл бұрын
I'm not sure about this error. This may be due to missing data or data location in different drive, etc. Try starting new project in ArcGis and proceed again. There shouldn't be any space in the file path you import in ArcGis. Use ArgGis 10.2 and also install Arc Hydro Tool for 10.2, HEC GEO HMS 10.2. Let me know if it's solved !!!
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
@@JustLearnCivil sir same error happen & tried but no solution
@kagithalavanya5613
@kagithalavanya5613 4 жыл бұрын
can i use multiple outlet points
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
For one catchment, you'll have only one outlet. If you need multiple outlet for multiple catchment, it may work but you can't have multiple outlet point for one catchment. However, you'll have outlet point at each subbasin outlet.
@usamanazar6768
@usamanazar6768 2 жыл бұрын
Hello, I am encountering command prompt "Could not dissolve polygon" while generating the project. Anyone who has encountered the same error before.
@JustLearnCivil
@JustLearnCivil 2 жыл бұрын
While dissolving, try using adjacent polygons. This tutorial has been made in verson 10.2. In some other verson, you may require to give more inputs apart from selecting the adjacent polygons where the same stream line gets divided.
@sasipasrijunmoung5234
@sasipasrijunmoung5234 5 жыл бұрын
Why I can't run river slope? It show like these "⚠️river slope" help me plz 😭😭
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Try enabling background processing from menu geoprocessing | geoprocessing option | check on Enable
@fatimaezzahraarzmi7506
@fatimaezzahraarzmi7506 3 жыл бұрын
Thank you so much for your efforts. I'm facing this error (could not dissolve the polygon) while generating the project, could you help me, please
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Are you refering to "merging subbasins"? If yes, then later version may require more input. So, you may switch to version of arcgis and hec geo hms 10.2 (as in the video) for simplicity.
@fatimaezzahraarzmi7506
@fatimaezzahraarzmi7506 3 жыл бұрын
@@JustLearnCivil thanks. I'm using arcgis 10.4 1 and can't go down to 10.2 because i have a lot of work that i risk losing. Is there any other solution pleaaaase i really get stuck ans can't finish my school project
@benyakaewkra-chang2272
@benyakaewkra-chang2272 5 жыл бұрын
Help me plz😭😭 I don't have RawDem when river slope step.how to do that?
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Before river slope step, try enabling background processing. You can do that from menu geoprocessing | geoprocessing option | check on the box behind ENABLE.
@benyakaewkra-chang2272
@benyakaewkra-chang2272 5 жыл бұрын
@@JustLearnCivil thank you very much
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
welcome
@wowbestboy
@wowbestboy 4 жыл бұрын
Hi, Thank you for your great video. At the stage of generating project with HMS at 16:00, I face an error 0x80004005 . could it happen because of the my Arc map version which is 10.8 and HEC-HMS is 4.4? I cant generate it!
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Maybe. It is recommended to use compatible versions of both software.
@Emaad_saeed
@Emaad_saeed 4 жыл бұрын
11:15 you should choose the Raw DEM which is the Fill layer NOT CAT
@danielchaka3966
@danielchaka3966 4 жыл бұрын
Thanks your tutorials.
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
Thank you
@sasipasrijunmoung5234
@sasipasrijunmoung5234 5 жыл бұрын
Excuse me. Can you teach about how to generate CN grid by hec geo hms?
@georginaedita3937
@georginaedita3937 5 жыл бұрын
Thanks a lot... Your tutorial helped me a ton!
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Welcome
@nishchaykumar6007
@nishchaykumar6007 4 жыл бұрын
Hello instructor, thanks for the video. Please share the DEM file you are working on with us to get the exact idea.
@dirribaadhufeeraa1845
@dirribaadhufeeraa1845 2 жыл бұрын
Hell Dear your vedio help me very much thank you very much but while i was try to calculate the river flo length ,slope all the component under characteristic toor bar say to me please add HEC_GEOHMS TO ARC TOOL BOX CAN YOU HELP ME how i can do these
@JustLearnCivil
@JustLearnCivil 2 жыл бұрын
Install HEC GEO HMS of the same version as that of the ARCGIS. While installing, it will ask to integrate with ARCGIS.
@tyeasmin
@tyeasmin 4 жыл бұрын
Hi, Thank you so much for making these valuable videos/ lessons. I am stuck and badly need help. This is 3rd attempt to 'Generate Project' using HEC GeoHMS tool under Project Setup menu. It is mainly saying that "System.Runtime.InteropServices.COMExption (0x80004005)ERROR. Would you be able to give me some hints how to resolve this issue? if I can overcome this erro, I could proceed next steps. I highly appreciate your help in this regard. Thank you and looking forward more valuable and informative lessons soon. Regards, Tahera
@vishnuh.jariwala9361
@vishnuh.jariwala9361 3 жыл бұрын
How you solved this error... please reply
@jatindersingh-fc7eq
@jatindersingh-fc7eq 5 жыл бұрын
anybody have any idea about error000732. its is happing during river slope.
@jatindersingh-fc7eq
@jatindersingh-fc7eq 5 жыл бұрын
missing rawDEM is showing but i am following this tutorial properly
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
If you get error in river slope then following these steps may resolve the problem 1. go to geoprocessing menu of ArcGis 2. then go to geoprocessing option 3. uncheck the box below background processing i.e. just before enable
@jatindersingh-fc7eq
@jatindersingh-fc7eq 5 жыл бұрын
@@JustLearnCivil this works for me.. thankz budddy this thing wastes 2 days of my life .. thnkz allot
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
@@jatindersingh-fc7eq Welcome
@asaadahmed1140
@asaadahmed1140 3 жыл бұрын
I want Adding HEC GeoRAS extension to ArcGis
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Download HEC GEORAS, it will be automatically added to ArcGIS. Remember to download the same version of HEC GeoRAS as that of ArcGIS
@ShahadatHossain-uu9nq
@ShahadatHossain-uu9nq 5 жыл бұрын
Could you share this docx file? if you upload it in google drive or somewhere it could be really helpful for me.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Link to download the procedure file - justlearncivil.blogspot.com/2019/08/the-procedure-for-hec-geo-hms-and-arc.html
@UthpalaKaushalya
@UthpalaKaushalya 3 жыл бұрын
When I choose "check data", it displays a runtime error for center containment. The log file portion related to it is as follows, Checking centroid... ESRI.APWR.HECGeoHMS10.HMSCheckData, System.Runtime.InteropServices.COMException (0x80040215): Exception from HRESULT: 0x80040215 at ESRI.ArcGIS.Geometry.IRelationalOperator.Contains(IGeometry other) at ESRI.APWR.HECGeoHMS10.HMSCheckData.CheckSkelContainCenter(ApLayers apLayers, StreamWriter txtlogFile) End of Checking centroid. Can you please give me a support in this regard? Thank you
@PADALACHANNEL
@PADALACHANNEL 4 жыл бұрын
In stream Definition......Area was disabled
@qasimalali4950
@qasimalali4950 3 жыл бұрын
thanks alot
@JustLearnCivil
@JustLearnCivil 3 жыл бұрын
Welcome
@DailyTechSolution_DTS
@DailyTechSolution_DTS 5 жыл бұрын
I am working with DEM of city area which is almost flat and When I am creating catchment polygon it gives me kind of weird polygon. I need help from you. Will you give me your mail ID pls.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
Try putting Batch point for creating watershed as near to outlet as possible. Delete any such points, if such points are already created.
@DailyTechSolution_DTS
@DailyTechSolution_DTS 5 жыл бұрын
It gives me 3 watershed but It also said more than one watershed can not delineate or set up for project.
@JustLearnCivil
@JustLearnCivil 5 жыл бұрын
if it is one catchment, it should delineate only one. Are you able to dissolve the catchment and make one?
@DailyTechSolution_DTS
@DailyTechSolution_DTS 5 жыл бұрын
There is too many source of stream network. So, there have different watershed and some of DEM area is not covered by the watershed. If you give me your mail ID I can share with you my problem. It will be too much helpful for me sir.
@samikshyapantha2176
@samikshyapantha2176 3 жыл бұрын
Hello! How can I contact you via email, your videos has been a great help.
@anushabdualimov1673
@anushabdualimov1673 4 жыл бұрын
Thanks for video Can i have your mail?
@sabindangol2779
@sabindangol2779 4 жыл бұрын
when i generate project..there is no fil,fdr,fac etc. in the list..what may be the problem?
@JustLearnCivil
@JustLearnCivil 4 жыл бұрын
You need to process fill (fil), flow direction (fdr) and flow accumulation (fac) yourself.
@sabindangol2779
@sabindangol2779 4 жыл бұрын
@@JustLearnCivil i have done those processes using arc hydro tool..but when i use hec geo hms..those things doesnot come there as in this video.
@sabindangol2779
@sabindangol2779 4 жыл бұрын
@@JustLearnCivil i have solved this issue. it was because of the file locations.
@devanks6700
@devanks6700 4 жыл бұрын
while creating stream definition it is asking enter the area value less than the largest drainage area but even a small number it is not taking. plz help (while my cells are 1122)
@krishankumarsanodiya7682
@krishankumarsanodiya7682 5 жыл бұрын
please help me with the error "HEC-GeoHMS BasinHeader Table missing while using command map to HMS unit".
Modelling with  HEC-HMS
59:30
Australian Water School
Рет қаралды 60 М.
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН
Как Ходили родители в ШКОЛУ!
0:49
Family Box
Рет қаралды 2,3 МЛН
UFC 287 : Перейра VS Адесанья 2
6:02
Setanta Sports UFC
Рет қаралды 486 М.
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
How to use a DEM to delineate a Watershed/Basin in ArcGIS
12:21
Monde Geospatial
Рет қаралды 234 М.
Introduction to Hydrologic Modeling using HEC-HMS (1/9)
16:56
HydrologyVideos
Рет қаралды 99 М.
HEC-HMS | T-3 | How to Set up HEC HMS Model
45:52
Md Arifur Rahman, PE, CFM, ENV SP
Рет қаралды 31 М.
HEC-HMS । T-2 | Description of model physics
14:53
Md Arifur Rahman, PE, CFM, ENV SP
Рет қаралды 7 М.
Вопрос Ребром - Джиган
43:52
Gazgolder
Рет қаралды 3,8 МЛН