Creality UW-01 - Wash & Cure Station

Amazon Links
Buy it here: geni.us/1A4m1
Official Store: www.creality3d...
Recommended: geni.us/JustVlads
Wash and Cure
UW-01 all-in-one washing and curing machine adopts a special control system, which support one step to finish the model post process.
Double-Row UV Lamp Beads& 360°rotating platform
With built-in LED beads(18 pieces of UV LED lights), the machine is compatible with most of resin printers; The double row 9-bead design with a higher irradiated area realizes quick curing and even irradiation for the larger model. 360c curing tray with magnetic force and reflective mirror make full use of the light source, which cures the model all the angle.
Large-Size Washing Container
190x154x200mm washing container size. It support larger size models for cleaning; with a sealed container and lid, it avoids cleaning solution volatilization and also stores the cleaning solution for the repeated use.
Adjustable Speed&2-90min Optional
With three-gear speed mode, it includes washing and curing; The washing and curing time has 2-90min optional. Delicate models come from the curing and washing.
LED HD Touch Button
Equipped with touch-sensitive buttons and LED large-size screen, the machine gives you a premium experience.Once the machine cover is removed during the curing process, it will immediately suspend the curing, which avoids light source glare and reduces light pollution.
As an Amazon Associate I earn from qualifying purchases
My website: www.justvlads....

[@JustVlads]

New Channel: www.youtube.com/@Just_Print Buy it here: geni.us/1A4m1 Recommended: geni.us/JustVlads

[@loshines3725]

That poor plant in the back ground has been getting trapped in the machine. THanks for the video sir.

[@lostmountainresearchco]

Bro u are super clean. We've left the resin in the vat since getting one a month ago and just print from it when we need to.

[@aqhan]

I just got this machine few days ago and I am shocked how quick is the "Slow" setting for platter spinning during the curing process. It's so quick in comparison with my Elegoo machine!

[@Pippa_shorts2]

Can it 3D print?

[@aqhan]

@@Pippa_shorts2 ? It's a curing station.

[@TheGamingNorwegian]

I just bought both the LD-002H and the UW-01 lol, cant wait to try them. Will be my first resin printer and washer/curer, ive only ever been printing with my Ender 5-plus.

[@DustinGorman]

So how you liking it so far. Currently debating between getting this or coming up with a DIY solution.

[@elkav.b949]

Oh! it is for resine, I thought it could be use for pla, thank you!

[@runforitman]

thanks for that little tip on making sure your models are dry before curing I would sometimes get those white 'burns', and I didn't know why

[@mechsparks]

Thanks for the demo.

[@sitgesvillaapartmentneilsc7924]

Good Video, thank you I'm considering in getting the creality resin printer and know nothing about the process so I wondered what this was for, nicely demonstrated and explained. Now I know what its for!! thanks...

[@josephjolly1936]

Great video as always, I have been using mean green due to the shortage of alcohol. I will have to purchase this unit.👍

[@SergeCruso]

been in the same boat, clearing out the Ultrasonic is just not the hassle I want to deal with anymore!

[@mikemleczko5565]

How about mention things in the order they should be done. Having the cure mentioned gave pause when you later see, oh wait, wash first. good descriptions though

[@cdurkinz]

Thanks for this, I hadn't even seen Creality made one of these almost ordered the Anycubic one that is like $30 more. Hopefully it's decent enough Creality usually is.

[@martinmajewski]

Great review! I left a sub and a like! Thanks.

[@andyreimer61]

Really good video. Nice job.

[@DamonGaskin]

I actually use mine without anything in it as far as a basket. With the bigger models, and the cover on the spine, not a problem at all.. lol, i do find the cure speeds a bit annoyingly fast. Also, I use denatured alcohol, which works great. And you can use the lid also on the cure as long as your not using the basket. I wish they sold extra buckets also. Luckily, you can use the buckets from an elegoo mercury

[@sysop224]

I have these two but I wish I had put handles on them before I started using them because the cases are pretty much ruined aesthetically from the resin that was on my gloves (and I was being careful!)

[@runforitman]

I think I'm going to get one of these I thought I could get away with manual washing and curing, but it sucks I've been spoilt by our form 3 at work with the auto wash and cure stations Also, I've broken the railings on that Eiffel Tower multiple times from scrubbing with a brush to wash I want to be able to print fine detail without destroying it in my wash

[@bratanac242]

Does it only bug me that every time he puts the UV lid on, it catches a piece of the fake grass?

[@enselroad5560]

Awesome Video, helped a lot! Thanks so much! 🙂

[@g7-reasearchers-j6-gutierr10]

i wish you have a unbox setup and review vid on the new ender 6

[@69mooseify]

you could probably refresh/clean the alcohol once it's too fouled by distilling it. maybe a little air still would do it.

[@darrylelam256]

How would you go about that?

[@Otakunopodcast]

Huh.... never thought of using the wash & cure to clean the vat too. Seems totally obvious in hindsight.

[@hectorp6715]

Great video! Can I use water instead of alcohol with this machine or it will rust or degrade some components? (I use water washable resin)

[@solardile7143]

It will absolutely use water!! I’ve used water and alcohol interchangeably for almost a month now

[@ConnorGoodwolf]

I'd recommend buying a magnetic flexible build plate for your bed, this will eliminate breaking the model. You should also never use a metal tool on the bed, the printer should've come with a plastic spatula. You can find a two pack of magnetic flexible build plates on Amazon for $26 at the time of this post.

[@giannaras2010]

How do you lower the beep sound on this machine...every time i power it up and every time it finish it makes the loud beep sound...how i can decrease the volume of this beep sound or how i can stop it from beeping?

[@burhandemirci8354]

I have an Anycubic Photon M3 printer. Which one should I choose? Creality UW-01 or Anycubic Wash & Cure 3.

[@makerkluang]

very useful guide, thanks man˜!

[@wilderrios7571]

Thanks for sharing

[@bernhardbinder6033]

Hello thanks for this Great Video but It looks like the model is not straight i saw another eiffelturm on youtube and it was the same is this a common problem on this printer type that long parts will be turning to one side?

[@RafaCabrera11]

Can in use it with anycubic photon?

[@bkt41tx]

How do you work out the time the print needs to be cleaned / cured?

[@DELTAALLSTAR08]

I usually go based on feel

[@DELTAALLSTAR08]

When you’re cleaning sometimes you can feel it still be a little slimy or not all the material is off of it. When you are curing it, I usually do two minutes and feel for tackiness. When it no longer feels tacky then I pull it off

[@jamesfinniss6448]

hey man, great content but just a tip, your video is very hard to follow with the way you cut it so many times mid sentence. once you notice it's happening, it's impossible to ignore! if you don't get the words out right try again! don't just stitch together 2 words at a time in several cuts to make a sentence.

[@hfxdronepilot9022]

Thank You great video - I’m looking at buying the same of the 2 in your video - creality resin printer and the washer/curer... is the the best setup Or is their a better resin printer? I currently print with a Dremel 3d45 looking at resin also now. Will the resin printer be ok to print in my apt?

[@RH3D]

how do you find this in terms of loudness compared to the wash & cure 2 by anycubic? (or others out there?)

[@MrDixonSyder]

I am new to resin printing. I have a Creality LD-002R, but waiting on a LD-006 and wash/cure station to be delivered. I did notice that you are using 70% IPA. Is this strong enough for resin printing?

[@kabsss1721]

Hello! Can i use it with Halot one plus ? Does the plate and table fit in ?

[@darren990]

use a hair dryer to dry rest of ipa off model

[@richardaubin1951]

What process are u using to recycle your ipa?

[@pablocalderoni8081]

Doesn't the membrane from the vat get damaged by soakign it into the alcohol?

[@brandonward3998]

No it does not actually, that’s how you clean out your vat is with alcohol

[@josephKEOarthur]

Lol can I clean dentures with that UV light

[@randomdudeontheinternet4389]

Will this take a Saturn build plate?

[@collinboyce2582]

Did you ever get an answer to this?

[@randomdudeontheinternet4389]

@@collinboyce2582 Yeah, I actually bought one. It does not, but it fits most of the things you are able to print. Will sell it tho, because my Mercury X preorder will arrive soon.

[@collinboyce2582]

@@randomdudeontheinternet4389 the preorder has completed and I didn’t see a way to purchase the Mercury X otherwise. Thanks for replying

[@22ndaccountduetocensorship57]

Imagine how many millions of subscribers this chanel could have if it wasn't shadow banned. Detterence dispensed, opression is futile, freedom will prevail.

[@dapperbrick7516]

What?

[@Eener1000]

He came up pretty much at the top of my search results. So I don't know what you are talking about.

[@guilhermesagaz3792]

Hi, can i use for elegoo mars 3?

[@SuperSwat85]

I bought this off of amazon and my propeller didnt spin until I flipped one of the magnets.

[@Александр-х6т4б]

Видео не плохое но про Я зык ты что то перепутал это Китайский принтер)))))

[@karlasavelainen7814]

Does anyone know if it’s possible to use this to cure UV resin jewelry? I use UV nail lamp for now

[@brandonward3998]

Yes it will do that perfectly

[@makewithmegma]

😍🔥👍

[@robertfrayer6711]

I wonder if Chinese people say that they wish American made products were in Chinese only? I highly doubt it. Its made in China and they were nice enough to put English on something that ranks amongst the lowest prices available.

[@arby4502]

it's very ribet

[@IIMRCrashII]

made me cring when he hit the scraper :/ any one else notice is plate eeek slow down dude if there not coming off easy put in in freezer for 30 minutes and they pop off! slow down dude nice and easy

[@infinite8425]

First...😎

[@acasualblenderer]

Second(: