K Series 4.7 Final drive installation!!

Do you have a all motor k series car and want to improve your acceleration? Throw a 4.7 final drive in the trans and enjoy! Here's a walkthrough on how to do that! Make sure you like and subscribe!!
Drop a rsx transmission
• RSX clutch replacement !
K Series transmission rebuild!
• K Series Complete Tran...

[@dieselstar5]

Great detailed video. Your attention to details and cautious approach of handling things earned you a subscription from me. Awesome job.

[@chadwickwicky67]

Man, thank you so much 🙏🏼 I’m so glad I found this, subbed and following your IG now as well! Literally could not be more clear and more informative, down to hardware part numbers! Ive been wanting to try 5.1 and will do lsd and clutch at the same time. I don’t need any of it but If I’m in there why not! I don’t plan on going back in LOL. I wouldn’t do it yet if not doing it myself 1) I don’t know anyone I’d trust to do it yet and 2) the labor would probably be more than I can pay at the moment. Your video gives me the confidence to do it! By the way, anyone tell you , you look like Dan Hardy? (Former UFC fighter and Analysts, one of best analysts in my opinion) haha first thing came to mind was this dude looks reminds me of Dan Hardy! Both looks and how thoroug you are. anyways thanks again!! Your vid’s are awesome!

[@axsb]

fyi, you will need to swap the counter shaft needle bearing from a2 to z1/z3 bearing. the shaft is 5mm smaller on the z1/z2 shaft. note: you mentioned it at 22:55 :)

[@trevorlawson9140]

Just curious, but what would happen if you didn't do this? I just got done with this job but didn't change the bearing. It drives fine so far...

[@axsb]

@@trevorlawson9140 your bearing must already be the correct one, it wouldn't have fit the shaft.

[@axsb]

@@trevorlawson9140 which don't make sense if you're truly swapping from 4.3 to 4.7

[@dawsonlo6685]

Bro your legit asf ! Now this is a real guide fr!!!

[@cbdreamer1709]

So good! Always stoked for your video!

[@cbdreamer1709]

You must have been really ripping!

[@cbdreamer1709]

So informative bud! Thanks again!

[@aaonrinaldi]

Do you have an update on how different the car shifts with the new springs? And how you like the feel

[@leod3963]

So can you install the 4.7 final drive gears from the crv 5 speed trans into the rsx base transmission?

[@simonian8516]

Do you recall the traction control being on when you shredded second gear ?

[@edwinma6618]

Best DIY video

[@kusomuchogusto5742]

Hey i have a question witch gears are stronger 03 type s or 8th gen si gears?

[@tonyzavarelli46]

I just had my transit part tried to put it back together and I could not get that snap ring in place can there be any reasons why

[@LuisLopez-op4mq]

@ 22:55, so i got that bearing for my fg2 trans & i got 04 rsx type s internals, but the bearing isn’t fitting onto the output shaft. What did i do wrong?

[@k24in31]

Hey Serg, im assembling my tsx transmission and was trying to install the shift selector but noticed only 3 of the 4 shifter fork slots lined up, did I do something wrong? I put a flat head in to see if I could move the sliders around to get the forks to line up in a row but it wouldn't budge.

[@floydmitchell3344]

Excelent content. did you use a gasket for the timing cover?

[@RaiderOfTheLost]

Can you install a straight cut final drive on a standard helical gearbox? If not what would be required to do this if possible. Thanks!

[@turbokefhatch9144]

Looks 🔥 Part number of the revised plug ?

[@jmorin2270]

I want to rebuild my K20z3 transmission but want a better ratio for highway top speed should I change the diff out

[@davidgreen2055]

I have a 2010 Honda accord manual i4, it come with a 4.3 final drive. I would like to put a lsd and 4.7 final drive, will it work because the gears are smaller

[@MannyRodriguez555]

Do you shim the trans or check shaft end play when rebuilding or adding an lsd?

[@gregconboy8029]

You should yes. But he clearly didn't

[@04MandoMan]

Any chance you know the size of the shim? The one that goes between bearing and 6th gear?? I need to order one.

[@steveb.7302]

Good stuff.

[@SVVVYEDITS]

Hi can someone help me? I'm installing 06 si final drive and lsd in to my k20a2 transmission. Do I need to replace my main shaft or can I keep my type s one? Does anything need to be changed out or is it a direct fit?

[@isanmoldonado4587]

Do u need the oil gutter Opened a z3 trans without one

[@headported]

red or blue loctite for final drive bolts?

[@chaserevstuning9271]

If you need a another main shaft and 1/2/3/5/6 let me know, I broke 4th in my stock trans but rest were good. I do need them so make me a offer..

[@vtecbanger3180]

Nice!

[@luisemilioclarasanchez3090]

Best gears ratio to drag with this fd?

[@noechairez1561]

Have a problem gear one to two the sleeve doesn’t go up all the to second gear

[@noechairez1561]

Sorry all the way up

[@practicetennisbyjaeshin3231]

I am thinking of going 4.3 because i want to lower the rpm at 6th gear. I currently have 4.7.. my goal is to lower the rpm at 6th at 80mph

[@neverknowsbest4994]

i'm in the process of putting an accord 5 speed in my daily ep3. tall 5th gear and 4.3 final. while building a 4.7 lsd 6 speed from an 08 si for my other ep3.

[@Mr4drteggy]

My man

[@jdm_obsession]

I'm new here you running a 6 speed?

[@itachithegoatg6803]

I don't think you need it that Final drive when your engine is making a lot of power and torque

[@leod3963]

Will give you better acceleration but worse mpg

[@jdubayou9498]

you said I'm talking out loud lol

[@SERGMOTIVEGARAGE]

as i was editing I noticed that 😂

[@andrewdero6271]

I think you forgot to show how you take that 3-6 gear from the mainshaft

[@SERGMOTIVEGARAGE]

no sir, link is in the video and in the description on how to do that. I covered all that in a separate video. kzbin.info/www/bejne/qqS5gHdppKergdE

[@andrewdero6271]

@@SERGMOTIVEGARAGE yup i watched till the end i got you.. will do watch those ones👍..

[@seantowingandrecoverytowin2504]

How many times u gonna fix that broken trans😂

[@IGDesigns]

Great channel. How can I message you privately?

[@SERGMOTIVEGARAGE]

instagram @sergmotive_garage

[@MariusVideoTuts]

Are taller because is just a spring. The OEM ones are shorter because are two springs, one in interior of the other. Duh!

[@rulemakerR]

Why not 5.1

[@TheShangralaaaa17]

uhh that oil gutter is like 100 bucks not 15 lol

[@ajbabinsack2021]

What your insta

[@SERGMOTIVEGARAGE]

sergmotive_garage