K20 k24 EBAY k series swap mount review

In this video I am reviewing I swap ebay mounts and giving my experiences with them.
I've installed the Ebay mounts on 5 different vehicles over the last 4 years with a total of 6 sets.
I know I rambled some but that's just me I hope you enjoy
K swap ebay mounts k20a2 k20z1 k24a1 k24a4 k24a2 k24a3 k20a3 eg civic ek civic EJ crv review twin engine

[@kolekindschuh901]

Thanks for the review. Your info on injecting the liquid urethane gave me info I didn’t even know I need! Thanks buddy. Looking into that option now.

[@savage_creations]

No problem glad it helped

[@savage_creations]

So everyone the bolt that is not a typical honda bolt for the t-bracket is m12x1.75 thread pitch 2 3/8" long fits. The non threaded section of the bolt if you get one with no threads by the head cant be longer than 1 3/16" long or itll catch the threads. My next update when I fill the mounts I just received will include all this.

[@bseries8826]

Yo that black EJ is wild son

[@savage_creations]

Thank you cant wait to finish the radiator so I can start driving it again

[@pikachuflys321]

Dude that’s crazyyyyuy

[@savage_creations]

Thank you check out my other videos on the twin engine on here and on Instagram @savage_creations

[@miguelplascencia2460]

If you buy the eBay mounts what axles do you use ? Does it even matter I'm using k20z3 into ek hatch

[@savage_creations]

There would be a difference since the crv has 36mm axles (nut size) and ek has 32mm I believe rsx base is what you would use one side needs a spacer between the axle and hub. Not big at all a washer or 2 should work just make sure you have enough threads for the nut to catch.

[@ioverdoneit]

Hey, I ended up buying a set used without bolts, any chance you would happen to know the bolt sizes I'd need?

[@savage_creations]

Message me on Instagram and ill try and help you. Savage_Creations

[@michaelstogsdill8744]

Yo I need an update. That ej with the two motors is badass. What’s your social media?

[@savage_creations]

Instagram is savage_creations its currently parked right now waiting for my radiator to be welded

[@savage_creations]

Just took a short 7 min video of a update I'll be posting either tonight or tomorrow. Other than driving it around in my yard to move it it's been on the back burner. I actually k swapped the crv and that's partially why but stay tuned for a update

[@NoFear1911]

out of curiosity would the hasport rubber mounts fit in them ?

[@savage_creations]

From what I've heard yes but never personally done it. But will try on my next 2 sets

[@3030rey]

Yes

[@sleeper_6999]

Please send the eg kswap mount kit link brother

[@savage_creations]

Theres alot of them honestly get on Google search 92-95 civic k series swap mounts and see what pops up to try Ebay but I found occasionally you can find them cheaper using Google. Should run you around 200 +/- 20 or 30

[@edwinaquino9291]

Do this mounts have the high nd low option?

[@savage_creations]

They do but it's more of a k24(lower) k20(upper) I believe(might be the other way around). My mounts for my white civic were not dual height and listed as k20/k24 and I did use them for both motors without issues. I just swapped in a k24a2 and a awd 6spd transmission a few days ago and no way could I use the upper hole the transfer case would hit the subframe.

[@pedrovalentin6658]

what size bolt was that from ace

[@savage_creations]

100% honest I dont remember and really didn't pay attention I just brought the t bracket with me and grabbed one that fit.

[@rotheahoun8852]

How’s the angle of the axle

[@savage_creations]

Fine been driving it since shortly after this video was uploaded. Driven in all over 30 min trips 4 hr trips etc the only issue is which axles to use. I was told that the b series axle was useable but I had issues so I used a 02-06 crv axle added a small spacer and no more issues. And I'm not easy on any of my cars.

[@icasualyt8875]

u got a 2 motor , V8 type , RSX??

[@savage_creations]

One front one rear 95 civic coupe k24a1/k20 swaps

[@meme9219]

anyone knows where to get motor mounts for brz/frs kSWAP

[@savage_creations]

I personally do not I know it's been done so I'd see if you can find a build post

[@meme9219]

@@savage_creations yeah I've seen build post but the manufactures their own

[@savage_creations]

Might be the only way at the moment

[@miguelplascencia2460]

My amusa mounts didnt fit right wtf the mounts dont fit on the bracket and the transmission side braket doesnt even fit on the frame this is bullshit

[@savage_creations]

Message me on Instagram savage_creations with details and pics I'll see if I can help

[@pikachuflys321]

Two motors in one car

[@savage_creations]

Hey sorry for the no reply but I didn't see this. But yes two k24a1/k20 swaps it's a fun car. I plan to build another one but both swaps boosted. Long term goal of 12-1400whp

[@pikachuflys321]

@@savage_creations that’s real cool man

[@savage_creations]

@@pikachuflys321 thank you if interested in pics and short videos of the build I have more on Instagram savage_creations