#131

[@KAMiJUINs]

The board used for video shooting was supported by VESTAR. The direction is different from the high-performance boards released these days, but the stability of the four-wheel-drive was really good. If you want to find out more about this board with the 4WD, check it out at the address below. vestarboard.com/ 비디오 촬영에 사용된 보드는 VESTAR로부터 지원을 받았습니다. 요즘 출시되는 고성능보드와들과는 방향성이다르지만 사륜구동이 갖은 안정감은 정말 좋았습니다. 확실히 다른 구동감을 가진 이보드를 더 알아보시려면 아래 주소에서 확인해보세요 vestarboard.com/

[@superbinchoi77]

편집과 까미의 귀여움은 영상이 올라올 때마다 오르네요

[@KAMiJUINs]

앗 그런가요 :) 시청감사합니다~

[@MobilJJN1080]

wow mntap jalanya semngat terus ya kawan hadir nyimak

[@esk8unity]

I’m assuming u can still use a smaller sized pully of your choice correct? Like a 32t, 36t, or a 38t.. Kegal or Abec should fit.. I’d love this with caguama wheels.. street boards like this underperform wayyyyy too much with cloudwheels in my opinion.. too heavy, too big, takes away acceleration, power, range, and u cant feel the board under your feet as much as 85-90mm wheels for this type of board...good stuff as usual!

[@KAMiJUINs]

Yeah, I agree with you. Because my favorite street type setup is my video number #119. For street type, I prefer PU wheels with wide contact patches of 85-90 mm diameter... And the overall balance is good, too. However, the reason why I wanted to use the cloud wheel is that the board is a 4WD, so I wanted to test it with a slightly larger diameter wheel, where place in poor conditions :) Thanks bro~

[@_Zer0202]

another one of your great videos bro i love that skateboard 😊👍

[@KAMiJUINs]

Thank you so much as always~ Bro :)

[@신베-k4f]

제 2년전 첫 보드도 70만원짜리 베스타 보드였었죠. 그 당시에는 몰랐는데 7키로 대의 가벼운 무게, 데크에 달린 손잡이가 얼마나 편리한 것인지 지금생각해보면 정말 좋은 보드였습니다. 집가는 길에 비가와서 망가지지만 않았어도...

[@KAMiJUINs]

아 그러셨군요... 베스터 보드가 은근히 많이 팔리는 보드회사 같아요~

[@krishnansrinivasan830]

Awesome & Thanks :)

[@KAMiJUINs]

Thanks~ friend :)

[@krishnansrinivasan830]

@@KAMiJUINs Happy Holidays :) Happy New year in Advance :)

[@eBoard3R]

*Ah man, shame about the pulley being fixed.* Being able to change wheels is really important to a lot of us but I guess they feel it's not for most of their customer base. I really like the blacked out look of this board

[@KAMiJUINs]

Same as you ㅜ..ㅜ I really wanted to use 120 Cloud Wheels with the board.~ Thank you for watching bro :)

[@scottdaviesyoutube]

The pully is apparently only fixed on these early units all customer boards will have normal pullys. I asked Emily for confirmation before I made my video 😊

[@eBoard3R]

@@scottdaviesyoutube *nice!* thanks for that, great for buyers.

[@samcourtrc6767]

This is gorgeous bro what away to get about love it buddy I wanna wish u and ur family and the we dog a lovely Christmas from my family to yours bro ❤️

[@KAMiJUINs]

Thank you so much :) I really hope you too~ Bro!

[@samcourtrc6767]

@@KAMiJUINs thanks bro

[@sinjh111]

4WD !!!!!!!!!!!!!!!!

[@KAMiJUINs]

넵 샤륜이요. :)

[@TheOndman88]

Bought this board based on your review and am fairly happy with it. How do I change between 2wd and 4wd? Can it be done without going through the original pairing mode?

[@KAMiJUINs]

That's sounds good~ Thank you for watching my videos :) And you have to enter pairing mode when you change the drive(2WD4WD)

[@AMG13OfficialGroupSteam]

👍👍👍

[@KAMiJUINs]

Merci beaucoup~ :)

[@ujung5683]

Really good x 100 👏👏👏

[@KAMiJUINs]

Really thank you lol ~ :)

[@seanleverton5403]

Just being curious but why would someone buy this board? Just because its 4wd? What i mean is that you can buy a Backfire Zealot S which would get you the same speed , range, as well as more customizable? I bet the acceleration on the 4wd is much better but other than that i don’t really understand the want to have this board? Not talking down at all. Everyone has different preferences and that’s why i love this sport because of many many options.

[@KAMiJUINs]

I agree with you. Each person needs different things and focuses on different things, so I think a fun market is created. Thank you for watching :)

[@TheOndman88]

Reason I bought it was for up hill acceleration or at least keeping speed while going up hills. This board flys up hills. Wouldn't really recommend it to anyone though it's poor quality and basic things like screws are not tightened correctly in the factory.

[@MyWorldAsDylan]

Bro another great video 👌🔥🔥🤙

[@KAMiJUINs]

Thank you for coming and watching, mate :)

[@warsfamicom8422]

ウィールの互換性が有るので、いろんなメーカーのウィールが試せそう。私の電動スケボーはインホイールモーターなので、いじれない。

[@KAMiJUINs]

インホイールモーターも静かで柔らかいという長所がある。 次回はベルト駆動の電光板を体験してみてください。 ご視聴ありがとうございます。:)

[@hello22361]

부스티드같이 느낌이 물씬나서 끌리네요 at 버전은 기본 휠부터 클라우드 휠까지 가능하다는 말씀이세요?

[@KAMiJUINs]

50T 풀리까지 장착할수 있다는걸 보면 6인치정도의 공기압 타이어까지도 가능 할듯 싶어요. 시청감사합니다~

[@dodgingtheworld]

The boards at @9:55 have anything to do w preference? 😉 I paused to see what you've kept

[@KAMiJUINs]

It's not related to preference, but I think the boards released these days have really good performance.~ Thank you for watching :)

[@dodgingtheworld]

@@KAMiJUINs Thank you for the amazing content! Love the chill music vibes and film style. Very board focus and not vloggy. Stay warm over there! (coming from an NYC boy)

[@Janna25]

Hm?

[@wesleyvinal9801]

26lbs?? The can't be right **Oh 4wd makes more sense my mistake 😂

[@NicholasKJable]

typo on your manual?

[@KAMiJUINs]

Can you tell me which part it is?

[@NicholasKJable]

@@KAMiJUINs 2:55

[@steveshot81]

Not worth the asking price especially since you can't change the wheels unless you buy it from them.For this kind of money you have so many other options.

[@KAMiJUINs]

I know what you mean, I hope they improve that part. If that happens, I think it will be a good price competition with Wowgo AT2 level of boards by applying the discount code now. Thank you for watching with your opinion :)

[@steveshot81]

@@KAMiJUINs Great quality videos as usual.I know that they give you these boards for free and making any negative comments would upset the manufacturer.But having to buy wheels from them obviously makes them more money down the road since you are stuck with no other options.It's also a reason for me not to buy from them.I would rather buy from another company where I have the option of using other manufacturers wheels and pulleys.

[@BenDover-vs7ih]

Too bad it costs an arm, leg and both kidneys. Sheesh.