07376369067 www.williamsmo... Support the Channel Donate: www.paypal.com...
Пікірлер: 197
@eddierolls2515 Жыл бұрын
Did a 3 piece clutch replacement on my drive today, following your guide. Your guide was excellent, but, as always, I had a bolt that wouldn't move and added 2 hours to the job. The sense of satisfaction when everything went back together and worked was amazing. Thank you.
@maxcauson132326 күн бұрын
My daughter has one of these 2012 model. Has 400000 on the clock and only now needs a clutch. Pretty good going hey!
@justinhinchliffe23554 жыл бұрын
I watch/watched Scotty Kilmer/Ratchets to Wrenches etc. For me, i find your clutch changes the most enjoyable. All function and zero waffling. Keep up the Awesome work Kevin. :)
@WMCS4 жыл бұрын
Hi Justin. Thanks for taking time to leave us a feedback.., and definitely for visiting the channel. Much appreciated...
@maxcauson132326 күн бұрын
A brilliant video.
@smoggy19644 жыл бұрын
A true professional at work
@WMCS4 жыл бұрын
thanks for the support and taking time to leave us a review. Much appreciated
@grahamhassett Жыл бұрын
🎉
@Chris-jy3dm4 жыл бұрын
I can't believe how much knowledge you've got Kein each time I watch you.
@WMCS4 жыл бұрын
Chris thanks for the support .., much appreciated
@alessandrer36164 жыл бұрын
The best mechanic in UK ! Thanks for sharing ! Respect man !
@WMCS4 жыл бұрын
Always a pleasure to read your review 🍻🍻
@alessandrer36164 жыл бұрын
@@WMCS Thanks man, respect and have a good day !
@jessejameson1543 жыл бұрын
Brilliant video from start to finish. You really do earn your money 👍 I work on bigger plant machinery with a lot more room to manoeuvre and usually in a workshop....so I appreciate your efforts. Thanks for making this 👍
@mrgrumpy51164 жыл бұрын
another easy job then Kevin and a bit of sunshine, you can't grumble about that,... we had a day in the cave because of the rain .. thanks for the video
@WMCS4 жыл бұрын
I think this in my opinion was the best day., a mild 15•c with a bit of wind and sunshine.., right up our street that 🍻🍻 Getting in the zone for winter .., some good old numb fingers to look forward to 😁✨....
@vinparaffin60824 жыл бұрын
@@WMCS ....get ready to be laying on snow, ice etc!
@robbieroche67794 жыл бұрын
true mechanic if u do it in ur own driveway great job kevin
@WMCS4 жыл бұрын
Thanks for taking time to leave us a review Robbie ..🍻🍻🍻
@UrbanoSocialClube2 жыл бұрын
Hey Dude, I live in Uk three years ago I know about weather and you are a Legend! Thank You a lot your videos are on my Netflix!
@WMCS2 жыл бұрын
Thank you for the feedback and support. Very much appreciated
@oaktree17872 жыл бұрын
Excellent. Top video. Easy to understand after seeing it done in real time. All the little details covered. Thorough, methodical everything covered. Top guy.
@billaua78 Жыл бұрын
I admire the way you work. I saw your choice is Luk. Do you suggest Exedy or something else like Valeo for example, for better results? Or Luk is the only you prefer that fits best for this model? Thanks anyway for your time..
@WMCS Жыл бұрын
It depends on vehicle. EXEDY are very good and so is VALEO and SACHS. AP and AISIN are top quality parts also.
@billaua78 Жыл бұрын
I am talking about Nissan Qashqai, petrol 1,6 2009 model. Exedy or Luk, what do you advice me?
@leokearns12212 жыл бұрын
Excellent Video and as they say no waffle and 15 min intro etc. One question is the Diesel 1.5 2010 Qashqai the same procedure?
@juanc.h.s.70264 жыл бұрын
exelente video amigo, una pregunta cuanto tardas realmente en cambiar un embrague aproximadamente. saludos
@FPScouser3 ай бұрын
hows it goin mate, good video! i recently bought one of these qashqais for my first car as a run a round cost me 1,500, when i got back and had a proper look over it, realised it was a bad purchase, its got near 170k miles on it so its wore in quite a bit, on top of that, someone crashed in to it at 2 in the morning while it was parked up, it caused the bumper to dint in but managed to pop it back out, but its slightly bent something to do with the front left wheel, so drives a little wonky
@mikepaton36142 жыл бұрын
Is this virtually the same as an M9R X trail T3, 2009, think I may have a slipping clutch and difficult to get between 1st to 2nd gear. So not sure if clutch or slave cylinder or gear cable/connections or clutch (i have read that cable gets corroded inside protective sleeve and sticks). Great videos for watching and very educational. Thanks for posting them.
@WMCS2 жыл бұрын
I think the xtrail is a whole different ball of wax.
@franciscoramirobinzamiro4919 Жыл бұрын
excellent video , I have a car like this , with this example , I will no longer be afraid to do the job . very good.
@JustaboutMotorbikes4 жыл бұрын
Your videos are excellent what we don’t see is the amount of work you do on the filming and editing side. I assume you are using a GoPro to get in about all the tight spots and some sort of light also 👍👍
@WMCS4 жыл бұрын
Honestly.., getting the camera light and action sets me back an extra 2 hours on repairs
@casprg2 жыл бұрын
Hello I just bought a qashqai 1.6 petrol the clutch comes off high and normal or does it mean that it is worn?
@traceywilton6069 ай бұрын
Hey Kevin love your work. Have you done any Nissan X-trail 2005 gear box? Would love to see a video on that thanx
@WMCS9 ай бұрын
Back in the early days. But alas no more.
@lordradi22 күн бұрын
Hi Kevin, after 3 years, I have tried it again, at got to the point of putting back everything together, but for some reason, the gearbox doesn't want to go back to its place. I have checked the correct positioning of the clutchplate, I am using exactly the same kit you are in the video, verified the cog count, and used the centre tool as you did. I have tried to match it with an extra jack and tried to move it back and forth but still won't click in, the driver-side driveshaft just gets in and I can turn the wheel like you do in the video, you can see the rings moving on the other side. Do you have any suggestions on what to check or try? If I left the gearbox in neutral it wouldn't move the gear shaft inside, that was my last thought after giving it up before retrying it this weekend. Could you please help?
@WMCS22 күн бұрын
You have to keep wiggling it in and spin the wheel with your leg. Otherwise for a smooth operation just remove that driveshaft.
@serkandilek56844 жыл бұрын
hello kevin again, good workmanship, health in your hands
@WMCS4 жыл бұрын
I will carry it like beacon in darkness ✨🍻🍻
@KLNYC3 жыл бұрын
Damn that is cool. UK doenst get tooo much day light.. I hope you can make it
@bogdantlro4 жыл бұрын
Great video William! Well done!
@id7763 жыл бұрын
Hello mate great video I have learned a lot One question I have I’m doing a gearbox on one of those Is the gearbox coming out without removing the subframe or is it a subframe out job then ? Thanks in advance
@firtinidis3 жыл бұрын
If you want to repair - change the gearbox you will have to take out the frame, if its just a clutch job then no, you will move the gearbox to the side and work it like this,
@id7763 жыл бұрын
@@firtinidis Yes I can now confirm this I’ve already done it I did have to remove the subframe in order to replace the gearbox Thanks
@Jdawgmateface42010 ай бұрын
What are you cleaning with in the spray bottle? Looks mint
@WMCS10 ай бұрын
Brake cleaner.
@drexxore4 жыл бұрын
Another outstanding job and video dude!
@balojan-eugen65183 жыл бұрын
Nice job! A few questions, if I'm allowed: 1. Is it always a must to remove the box completely from the vehicle or is it just roomier to do so to replace the clutch assembly? 2. What kind of solvent do you use to spray and clean the parts? 3. How many days do you rest after such an undertaking? 4. What kind of device you use to shot the video? It's generally very good quality. Thx. Keep up the good work!
@WMCS3 жыл бұрын
Hi Balo.. you don’t have to remove the gearbox completely as long as you’ve got enough room to your discretion to safely remove and install the clutch. Any solvent is good. I use brake cleaner as it’s readily available for me. I used to do one clutch in the morning and one in the afternoon. Now I do one every day Monday to Friday.,, January to December., I’m using a GoPro for filming.
@balojan-eugen65183 жыл бұрын
@@WMCS Thank you for your swift answer, honestly I didn't expected it so soon. I'm a graduated mechanical engineer and I use to repair/maintain my cars myself, so I can easily realise how difficult this job of yours is, especially that you do these replacements without a dedicated elevator. Laying for hours under a dirty car is not the heaven on earth, I don't envy you at all. Not to speak about cold, rain, wind and above all, you still manage to record it...Good for you and I am glad that someone is making an audience on YT out of his hard work, done on a regular basis and not based on some shit. I wish you all the success in the world, money (I assume you do this for as living)and above all, health. Take care of yourself!
@oscarmontero57244 жыл бұрын
Good one! I especially enjoy any Renault-based car. This time It seems that you managed yo get in position both the drivestaft and the box at the same time!
@WMCS4 жыл бұрын
Well ., I had to do a double take. As I didn’t want to not show how it was going on the other side. ,,, thanks for tuning in as always. There’s a nice one coming up in the next few hours.
@oscarmontero57244 жыл бұрын
@@WMCS Yeah, I noticed the double take. In any case, you managed and I hope you saved some time! Waiting for your new work!
@gunstig-no2 жыл бұрын
Great video and good angles showing the work, lotsa love from Norway. Im doing the same on a Quasqai but we got into some problems where the gearbox would not pry loose as in 18.08 in your video, we have a hard time getting the gearbox to seperate from the engine. Any tips other than prying next to other outgoing driveshaft?
@WMCS2 жыл бұрын
Wiggle and pry it out. Probably stuck on the spline ., it happens when the clutch is filled with dry rust.
@sp21814 жыл бұрын
Job well done mate. Its good to see that people still drive manual, down here is Australia its becoming a rare skill. Btw, what kind of universal joint/wobble joint are you using?
@WMCS4 жыл бұрын
Hi Sanesh.., it’s great to get a review from Australia 🇦🇺.., a place I’ve always like to visit .. is manual cars becoming a rarity now .., is it because of traffic
@sp21814 жыл бұрын
@@WMCS i dont think traffic is a major factor. People just prefer the auto over manual because it has lower maintenance cost. The cost of labour to do a clutch is in the $1500 for a corolla so people just fork out the extra few hundreds bucks and upgrade to the auto box. The are still petrol heads,racers, drifters who are still manual drivers but the vast majority done under would rather be in D at the lights than sitting there clutch in ready to launch like a bat out of hell.
@WMCS4 жыл бұрын
Wow that’s a lot of money for a clutch repair ... I have never been a fan of auto Box .., keeping in mind all of them still has a clutch fitted. But the selector does the shifting job ... and the plate does wear down. That must cost a lot more ...
@jacquesscholtz67833 жыл бұрын
Hi, great video. I am trying to do a clutch on 2.0 J10. I only have one problem. I can seem to be able to loosen the bolts holding the pressure plate to the flywheel. I have bolt requiring a T40 star bit wich I actually bent the splines on trying to get the bolts loose. Any advice?
@johncoady92376 ай бұрын
Hi Kevin I'm doing another qashqui for the son,but he is 1.6 petrol I hope same layout🫣 anyway I have my old clutch kit in shed from my diesel qashqui would you know if it go into his petrol thanks john
@gamelias873 жыл бұрын
Hi! My clutch slave gone bad. Car is a 2008 qashqai 1.5 DCI. Im thinking to do a clutch replacement, not only the slave cylinder. I don't see much difference between 1.6 petrol and 1.5 diesel. Is the same procedure?
@WMCS3 жыл бұрын
Have a look in the channel. I’m sure there’s a 1.5dci in there somewhere. Otherwise stay tuned. There’s a 1.5 Nissan Juke coming up on Friday. Same platform.
@remcokok15442 жыл бұрын
Dear Kevin-Albert you are a real legend! Quick question I just changed the whole clutch system on my 2011 Qashqai 2.0 diesel 4x4. The coupling pedal has a very short move until it engages the gear. And is very stiff. This is actually why I replaced the whole system. Turns out there is no change with the new gear installed. Do you have any idea what this can be? Thanks so much in advance for your support and have a great weekend!
@WMCS2 жыл бұрын
Check the hydraulic system. Master cylinder or clutch pressure regulator
@remcokok15442 жыл бұрын
@@WMCS They seem to be alright can it be a defect in the flywheel? If so is this a common issue that you have seen more on this model?
@shaunfreeman30074 жыл бұрын
Fantastic job all the best Shaun
@MegaJonathanga4 жыл бұрын
hello I am from Mexico,i have been your follower for a while and i would like to know what type or kind of fluid you use to clean your stuff like in minute 21:12 is it a special brand ,where can i find it? i like how your work and your videos.
@WMCS4 жыл бұрын
Hi Edgar.., Mexico 🇲🇽 is on my bucket list for a clutch .,, 🍻🍻. It’s brake cleaner any solvent is as good.
@robbiemelton24932 жыл бұрын
great vid i just done a clutch and this vid was awsome , mine didn't go as easy as yours looked, keep up the good work, top man
@WMCS2 жыл бұрын
Thanks. The main thing is you got through it mate. 🍻
@westawesta90634 жыл бұрын
Hello kevin my friend 👏👏👏👏.comme d habitude un plaisir de regarder tes vidéos !!!
@WMCS4 жыл бұрын
salut Westa., Merci comme toujours .., vous avez un bon dimanche copain.
@gam1ngfreak111 Жыл бұрын
Great video. Does anyone know if the method is the same with the J11 Qashqai to balance the Gearbox without needing to drop it out completely??.
@WMCS Жыл бұрын
Subscribe and access full video on the channel.
@jaykent66454 жыл бұрын
Brilliant as usual Kev, i see u use a good nut gun,why not get an electric rachet to make things quicker when your putting on and taking of pressure plates and the thrust bearing would make it quicker perhaps. Keep up the good work Kev and thanks for sharing with us all. Regards Jay
@WMCS4 жыл бұрын
Jay I’ve been getting some good feedback about those ratchet .,, one of them would definitely shave off at least a good 20 mins .. too right 🍻🍻faster them bolts get spun the better ..💡
@awiserbud2 жыл бұрын
I bought a cheap one on ebay, came with 2 batteries and a fast charger, best 20 quid I've ever spent and yes it gets used daily! Had it nearly a year..still going strong.
@lordradi3 жыл бұрын
Thanks for your great instructions, just finished with mine based on this. Maybe someone else also could benefit from ordering a fresh gearbox mount bush - as I had surmised, mine was in pieces.
@vinparaffin60824 жыл бұрын
Kevin, do you ever have any doubts about disconnecting the battery (yes , I know you have to) radio code, settings, alarm etc. !!
@WMCS4 жыл бұрын
Hi Mike .., I’ve never actually thought of it all.., it’s easy enough nowadays to get radio code back. It’s about £10 over the phone from main dealer parts department. I won’t make much difference to the alarm. But if there is an immobiliser fault stored .,, “french cars only” it won’t start for love nor money....
@vinparaffin60824 жыл бұрын
@@WMCS .........so what do you do, to resolve the French car non starting issue ?!
@WMCS4 жыл бұрын
Most time I have to pull out the immobiliser pin from the ECU and direct start it from battery to starter motor to show customer where problem lies ..
@gregdelasavoie21054 жыл бұрын
"Thhhhhheeeee Clutchinatorrrrrrrr" j'aime bien quand t'enchaine les vidéos 👍😉
@WMCS4 жыл бұрын
I’m still hunting for that timing belt ... 🍻🍻✨
@gregdelasavoie21054 жыл бұрын
@@WMCS ohhhh.thanks my friend 😉
@andrewlinch53325 ай бұрын
If you seperate the clutch from the engine, like you did, is it possible to lift engine out from the top, I am changing the engine
@WMCS5 ай бұрын
I can’t say for sure. But I would assume yes. As you’d have a lot of room.
@capricornlady53973 жыл бұрын
Hello mate mate i know how much torque of the bolts in the clutch pressure?
@jamesinchrome3813 жыл бұрын
Need help, egr plug has snapped at tge wire, not sure which wire goes where !!!
@mariomarx75144 жыл бұрын
Olá,sou do Brasil e sou mecânico, gosto muito dos seus vídeos.Qual é esse líquido que você usa para lavar? Grato 👏👏👏👏
@oscarmontero57244 жыл бұрын
Brake cleaner
@felipepacheco2969 Жыл бұрын
De que medida es el cuadrante del tapón para vaciar el aceite de la transmisión tengo que cambiar el embrague de mi Qashqai
@jims66142 жыл бұрын
it took you just an hour to swap the clutch? amazing!
@danielluton25089 ай бұрын
I am trying to do this on exactly the same car, but I am having a real issue separating the Trans from the Bell housing (18:10 on video), any advise would be appreciated. I can get a half cm gap around most of it apart from the top, no movement at all here. I'm sure I have removed all bolts too, have tried a pry bar but no joy...help!!!
@WMCS9 ай бұрын
Keep at it. It will come out.
@stefank2643 жыл бұрын
Great job on the street.
@johncoady92372 жыл бұрын
Hi Kevin I'm trying to follow this video but mine is diesel is it pretty much same set up,, cheers John
@WMCS2 жыл бұрын
There’s a diesel one on the channel. But all exactly the same.
@johncoady92372 жыл бұрын
@@WMCS thanks I had to run to halfords and get a 8mm square key for the gearbox oil,,, 😬
@johncoady92372 жыл бұрын
@@WMCS hi Kevin OK i have my gearbox off,,, but I noticed play on the preasure plate in and out in and out is this normal,,, it gives the impression its loose,,, is the play normal,, cheers John
@Messingwithbamppa4 жыл бұрын
That trans fluid was nasty..never changed before? Btw are those gripster gloves? I'm thinking of buying a box for test.
@WMCS4 жыл бұрын
Definitely never been changed the oil. I don’t think a lot of people do change their gearbox oil .., it’s orange nitrate gloves. Very durable.
@Messingwithbamppa4 жыл бұрын
@@WMCS just did a flywheel + clutch job on my own Volvo V50 2.0D, i was shocked from the condition of the gearbox oil..going to change it again soon to flush out the remaining gunk...
@fredrich993 жыл бұрын
Done lots of these . They are easy with loads of space and non complicated .
@gegegege78234 жыл бұрын
bonjour toujours aussi professionnel bravo bon dimanche
@WMCS4 жыл бұрын
salut Gege .., Merci comme toujours .., vous en avez un bon trop copain.
@trupa20202 жыл бұрын
This video has helped me a lot. Many Thanks mate.
@WMCS2 жыл бұрын
Really glad to know it came in quite handy.
@Chris-jy3dm4 жыл бұрын
Massive respect
@englanddanthefirst4 жыл бұрын
Great job as always.
@thomaschevet4644 жыл бұрын
Hello ! I'm french guy, my girlfriend have a Peugeot 107 1L. the petrol clutch is not good quality on this car How many time for change clutch for you ?
@WMCS4 жыл бұрын
salut .., généralement environ 70 000 miles .. avez-vous déjà remplacé un .., quel kilométrage.
@thomaschevet4644 жыл бұрын
@@WMCS Il a déja été remplacé à 75000km, je voudrais savoir combien de temps tu mets pour remplacer l'embrayage. Pour savoir combien de temps je mettrais pour le faire moi même, un garage me prendrais 750euros Merci pour ta réponse
@WMCS4 жыл бұрын
Oooh ok .., je comprends. environ 3 heures cela m'a pris.
@dzeridzeri89272 жыл бұрын
Super Video, IT took you a lot of time?
@0512Nick3 жыл бұрын
Is it the same procedure for the 4wd version?
@WMCS3 жыл бұрын
You have to take into account transfer case and prop shaft for 4WD. Check freelander repair on the channel to have a vague idea.,
@TheBigDaddy1983 Жыл бұрын
Excellent video mate
@WMCS Жыл бұрын
Many thanks!
@dubaiphiltv3 жыл бұрын
Hi please answer my question if you have time. I have the same car model with you and i notice that every time i change the gear from P to R or D i can hear a snapping sound. Do you have any idea what is the problem? I recently changed the transmission oil but the sound still there. Please help and thank you.
@WMCS3 жыл бұрын
No idea mate. Sorry
@gsoup78502 жыл бұрын
Great job mate, very helpful thanks
@paulcollins46623 жыл бұрын
Great videos great work
@johngault36934 жыл бұрын
Hey Kevin i often wonder if u ever take a break... No way i could do what u do.. On saying that me and my dad are going to do his clutch sooner rather than later the flywheel is ready to jump out to say hello 🤪 2011 2.0 diesel if u come across 1 would love 2 c that video b4 we start every bit helps lol.. Take care buddy.
@WMCS4 жыл бұрын
Hi John.., I try and maintain a steady momentum.., usually about 4-5 hours ... I’m pretty sure there is a video of your one on the channel ..,
@denissetruquini73054 жыл бұрын
Very good job man thankyou very much teacher
@WMCS4 жыл бұрын
Don’t know about the teacher bit tho 😁✨✨
@diegomanutencaoautomotiva.3 жыл бұрын
Muito instrutivo seus vídeos.. Obrigado por postar aqui👍👍👍👍👏👏👏👏👏👏
@johncoady92376 ай бұрын
Hi really need your help please,i replaced the clutch and it appears to be stuck in gear,,the car will only start if i press clutch,,,let it go and car cuts out,,with engine off i cant even shift through the gears,what have i done wrong please
@WMCS6 ай бұрын
Must be a gear linkage. Maybe wrong way round.
@johncoady92376 ай бұрын
@@WMCS ye I checked that but I let them fall back to were they were blue on top black on bottom,,,,there's only one thing I can think of,if I installed the wrong size clutch disc would I still be able to close up the box or would I have great difficulty closing it
@vuli16474 жыл бұрын
oh, so ground cable, battery to transmition, snaped here too. on 2.0dci happed the same.
@WMCS4 жыл бұрын
I had a look and thought how on Earth is the car still starting .., it was completely snapped.
@kylemclachlan11764 жыл бұрын
Hi Kevin, that big pry bar must be worth its weight in gold.
@WMCS4 жыл бұрын
It’s a solid stainless steel that is. Life wouldn’t be the same without it.
@kylemclachlan11764 жыл бұрын
@@WMCS did you buy just from that purpose? Can fare take a betten.
@larbisahraoui33724 жыл бұрын
Thank you verry mutch 😁😁
@marklarkan47013 жыл бұрын
have you done the 07 with a v 6? the altima
@WMCS3 жыл бұрын
Not yet. But it sounds very interesting..
@deebee39012 жыл бұрын
Kevin is this one of the worst cars to do a clutch change on?
@WMCS2 жыл бұрын
Oh noo.. what happened
@deebee39012 жыл бұрын
@@WMCS I'm just hearing in Australia, mechanics hate to do clutches on Nissan Qashqai. They are all 2.0 litre petrol here. Issues bleeding the concentric slave dual mass clutch system.
@corei514 жыл бұрын
Top Job 👍
@hauxhaux1112 жыл бұрын
What kind of oil do I need? Like behind the plastic plug?
@WMCS2 жыл бұрын
75w90
@hauxhaux1112 жыл бұрын
Thanks mate=)
@youssefelyoumni7061 Жыл бұрын
Sai un grande meccanico bravo
@ahmedal9122 Жыл бұрын
Nice job 👍 well done bro 😎
@stoiancostel51474 жыл бұрын
Hola amigo me gusta tu video un salut de madrid
@WMCS4 жыл бұрын
Hola Stoian.., hope you have a smashing weekend ..🍻🍻
@stoiancostel51474 жыл бұрын
@@WMCS Hola gracias amigo de unde eres tu pai se
@bobbobby57244 жыл бұрын
Love love you videos.
@stefank2643 жыл бұрын
How long did it take?
@WMCS3 жыл бұрын
About 4 hrs
@garmianhama3706 Жыл бұрын
TOP Video Thanks
@christinaprinz36122 жыл бұрын
Super Video👌🇦🇹
@ВасяШеліган4 жыл бұрын
Натюрліх профі!!!👍👍👍👍👍
@adilsayed8042 Жыл бұрын
Excellent
@8686body2 жыл бұрын
Hello. I was making a gearbox for spare flywheels after not starting the engine, why ??? code p0340 Nissan qashqai 2.0 dci 4x4
@WMCS2 жыл бұрын
Maybe the flywheel is not in the correct position
@WMCS2 жыл бұрын
Or the crank sensor is faulty. Did you plug it back in.
@8686body2 жыл бұрын
thanks!
@marisjurevics19742 жыл бұрын
like a boss! 💯
@stephanecesarini65464 жыл бұрын
Nice...
@sinanhan1524 жыл бұрын
👏
@pionyr8853 Жыл бұрын
A well done movie.
@WMCS Жыл бұрын
Thank you.
@keithwelton4 жыл бұрын
A 19 plate needing a new clutch?
@WMCS4 жыл бұрын
It’s in the title 😁🍻... private plate that
@keithwelton4 жыл бұрын
Kevin-Albert Williams Whoops, perhaps I should have trad the title.
@WMCS4 жыл бұрын
😆🤩🥳
@Tinkermatt Жыл бұрын
I have followed the video religiously but I cannot get the gearbox off the engine I have a gap but it will not pop off like it does in your video
@WMCS Жыл бұрын
It’s probably just stuck on the dowel. Keep prying it evenly from the top down.
@Tinkermatt Жыл бұрын
We have been on it all morning it’s like the drive shaft won’t come out the diff
@Tinkermatt Жыл бұрын
There is a gap all the way around the box but the shaft won’t come out
@Tinkermatt Жыл бұрын
I managed to get it off thank god
@Dw-cr2dr Жыл бұрын
Why do Nissan qashqai has a hard clutch pedal,
@WMCS Жыл бұрын
Worn pressure plate.
@bronka483 жыл бұрын
Please make Q&A video? You Should create Patreon acc ;) I would be your Patreon.
@AreaFiftyone513 жыл бұрын
👍👍👍
@elhadji5373 Жыл бұрын
👏👏👏💪💪💪
@ahamadakhnaf6434 Жыл бұрын
❤❤❤❤❤❤❤❤❤❤❤❤❤
@alexkay18743 жыл бұрын
WOW
@Depytat964 жыл бұрын
31:23 Lubrication is over!
@WMCS4 жыл бұрын
Proper over !!✨🤩
@focus6784 жыл бұрын
Lot more easier than VolvoV40.
@WMCS4 жыл бұрын
Definitely.,, a lot less time taking off that battery ✨🍻😁