My 4 Favorite Finishes and How to Apply Them

[@katzmosestools]

Tool links and things I talk about in this video: Shellac Flakes (Blonde): amzn.to/33981YA Bee’s Wax:https: //amzn.to/30K70EE Mineral Oil: amzn.to/2OpDGAA HVLP Set (only $89): amzn.to/33hGHHJ Total Boat Epoxy: bit.ly/2I3Q8m4 20% (That’s HUGE) Discount code KATZMOSES HVLP Video: kzbin.info/www/bejne/npOUhXSHYtCrqJo Mike Pekovich’s shellac video: kzbin.info/www/bejne/oWXCpHyoesuXga8

[@woodworkerroyer8497]

Why would you put shellac under another finish? Or on top, for that matter? Also, what grit do you sand to before each finish?

[@danieldurkton2942]

Jonathan Katz-Moses Good morning Jonathan, I really enjoy all your videos great work very informative. You had mentioned that you have a class on the cutting board Do you have a KZbin video on the class or do I buy a video on it?

[@katzmosestools]

It will be out soon

[@katzmosestools]

For sealing quickly and top coating with a stronger finish. When you need to refinish something and you don't know what finish is on the piece already

[@woodworkerroyer8497]

@@katzmosestools thanks

[@WoodfulProjects]

For those wondering the ratios of wax to mineral oil, I think JKM meant 4 parts of oil and 1 part of beeswax to get a sort of pomade. Not 4 parts of wax… otherwise, you’ll just get a chunk of wax that you cannot apply. You’re welcome.

[@stefanogiustoph]

Yep, the ratios got inverted. I was getting confused 'cause in his dedicated video Katz Says 4 pts Oil to 1 pt Bees Wax

[@dan00017]

Had to watch this twice, because the first time I was too busy staring at that gorgeous cutting board to absorb any information lol! Great video, man!

[@heyimamaker]

It's photoshopped ;) I would love to see how one is made.

[@ethanwong9950]

Too bad you can see it splitting...

[@heyimamaker]

@@ethanwong9950 I didn't notice any cracks?

[@dan00017]

The only thing splitting is my brain trying to make sense of how it's done lol

[@claire04300]

I have done some woodworks in the past but this woodwork plan kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG helps me do much in a far lesser time than i used to do i have already built several projects with this plan and i intend to do many more soon. Thank you so much!

[@CountDabulaTV]

This looks like a scam, why is it a top comment

[@barryalcott4882]

Great video. Beeswax and mineral oil also make a great, kid safe finish for wooden toys.

[@ettumama]

As a long time woodworker I was shocked by how much I agree with everything you said in this video. That never happens. Thanks.

[@MissionSRX]

Good info all around. Per Flexner's book and personal experience, be careful with the lacquer in humid climates. I switched exclusively to quick-dry poly after moving to FL and having lacquer pull in a ton of moisture and turn my finishes white.

[@kindredspiritzz66]

i always just grabbed a can of gloss and slapped that on, never really gave it a thought that there was more to finishes. Im 54, its amazing the things you learn or realize later in life you never knew, specially on shellac, never even tried it before but i will now

[@Mr_Rick]

Jonathan.... Gloss and Semi Gloss do have their places. To see subtle grain details that can really pop out and beautify the piece you need to increase light amplification. Like birds eye grain not normally seen. Increasing light amplification is done by increasing the gloss. Subtle details will pop unbelievably!

[@1320crusier]

I refinished some rifle furniture with glossy water based poly but I also added wood dye to it because of the color I wanted. After the layering, buffing, sanding, and final coat of spray on oil based poly.. it doesnt look plasticy but sure does look deep.

[@rjmills126]

Best video about finishes I found. No one else really went over the poly v lacquer debate.

[@wb_finewoodworking]

Super video Jonathan. This one is practical and helpful. For the past 40 years or so my go to finish has been lacquer. I’ve started getting into shellac and have found it to be a great choice for some things. Your method of mixing a batch and storing the rags in the jar is super. I never thought of that and will start doing that when I mix my next batch. That part of the video was very helpful. Yesterday my wife suggested that I make cutting boards for Christmas gifts next year. Your finish looks perfect and the idea of giving a little jar of the finish along with the cutting boards is excellent. The main reason I’ve hesitated on making cutting boards for gifts in the past was that they need to be refinished occasionally. Your idea solves that problem. Thanks.

[@dolphinberserk]

This is the best summary and explanation I have seen so far.

[@jonivanart]

I make my Shellac with Everclear on my instruments. It seems to flash off a little bit faster which allows me to work through the process quicker. Also using dyes with it makes some great colors!

[@bobmckenna5511]

Thank you, I love that definition of shellac. I’m generally confused about the difference from varnish to lacquer to shellac, etc.

[@shaynesabala]

Thank you for the video. I don’t know anything about finishing other than painting. I will save this video to reference later.

[@BP-dc6ps]

"We call it the Katz-Moses goo" "Stop it!" 🤣🤣🤣 dying! Absolutely LOVE your videos Jon and your dovetail jigs! I learned how to do quite a few things woodworking thanks to you.

[@atreynolds]

If I close my eyes and listen to your video, it sounds like Patton Oswalt is telling me how to do woodworking. Outside of that, another great video. Thanks for the fantastic tips!

[@alext9067]

Just to add to the uses of shellac, it's a great stain blocker and it's used to prevent blotching when a penetrating stain is used on softwoods like pine.

[@seanhenry744]

So shellac first and then stain?

[@ImALefty08]

@@seanhenry744 yes. Just make sure to not to put it thick. Just one thin application and that's it. So much cheaper than minwax pre-stain conditioner.

[@cavasinon9182]

My Grand-grand-father (who was a "wood-worker" / carpenter here in France) used Shellac in 1900-ish :)

[@TeamProsperity]

Finishing is one area I need to up my game! So this should help a lot, thanks

[@ryanmelvey8764]

i like using boiled linseed i make myself but yeah the dry time is annoying. i am excited to try shellac. your method seems minimal fuss and looks great. i will try the epoxy as well

[@Meyerwoodworks]

Arm-R-Seal Satin, has to be one of the best finishes. Looks fantastic, it's impossible to mess up, and you put it on with just a shop towel!

[@juanjacobo36]

I've messed up the finish using Arm-r-seal

[@Meyerwoodworks]

@@juanjacobo36 How!? You just wipe it on and wipe off the excess.

[@juanjacobo36]

@@Meyerwoodworks trust me... I've messed it up. For one even the lint free rags aren't always lint free. On top of that if I apply the finish on a hot day it tends to tack up real quick when overlapping strokes on a large surface. I'm just saying it is possible to mess up Arm-r-seal depending on a few situations.

[@DrTibbsy]

This was soooo helpful. I am terrible at deciding on a finish and I always want something that is safe for my kids and not going to burn my house down.

[@missyrabbit5250]

that cutting board is BEAUTIFUL

[@imowfaces412]

Dude I love it when I bought my house there was a old work bench in my garage I was going to clean it up and do this. However I like the husky base and your point in the solid wood of the husky bench. I bought some scrap hardwood from the box store and it was so much money. I'm nervous about how much the wood is going to cost haha

[@seanmyers227]

Thanks so much for doing these videos! I'm a metalworker who's been wanting to get into woodworking for a while now, and having things like finishes and joining laid out simply is invaluable. It really makes creativity accessible. Thanks for everything you do here on KZbin! You're the best!

[@JKarle]

Excellent video and very informative, thank you. I also love the simple sanding block with a spline in it to hold the paper....so simple and so useful!

[@jamesfetherston1190]

Usually not too fond of gloss finishes, but I did a nitrocellulose lacquer gloss on a mahogany guitar body. Yeah, it took almost a week of coating and recoating, a couple weeks of curing and then hours of sanding and polishing, but the results were excellent. Not plastic looking at all.

[@daviddejulio863]

Another fantastic video. I know it's a bit old by now but soaking up all of your content. I've been on the fence about making up my own shellac but I think this puts me over and I'm going to give it a shot.

[@johnclavis]

I used 2 oz beeswax and 6 oz fractionated coconut oil to make wood butter, and it's been working great on my cutting boards, wooden utensils and even a plant ladder I made for my fiancée! Plus it moisturizes your hands XD

[@katzmosestools]

Awesome!

[@johnclavis]

@@katzmosestools oh, and I'm going to try out shellac based on your recommendation. Thanks!

[@JPU89]

I prefer Shellac too. Quick and easy to use.

[@shawnjones4000]

This was very useful! I have been using only lacquer and epoxy, with rare poly finish. I am going to try shellac.

[@KastnerFurniture]

Really surprised to not see hardwax oil in this list. So easy to use, and the finish is beautiful!

[@shineriseliu7104]

I've never thought that a woodworking video can look so similar to a master chef show.

[@swamp_cabbage]

I have a "BoosBlock" butcher block that I bought years ago that came with what they called Boosbutter that was exactly like your beeswax mixture and was absolutely amazing. That sort or coating really does go a long way on those wood blocks.

[@designer-garb572]

I have never seen denatured alcohol in the UK, I have always used methylated spirits for shellac which works the same as far as I can tell, great video as always.

[@philallen9650]

I think its the same thing.....denatured just means its ethanol with additives to stop people drinking it !! which is also why methylated spirits is purple and smelly.

[@AESamuel]

@@philallen9650 You're right, it's the same stuff. The purple colour in the UK so people know you shouldn't drink it isn't a requirement in every country.

[@BiggMo]

It’s an American thing because of the taxes on alcohol. Alcohol needs to be ‘denatured’ or made un-consumable or it would be subject to the government taxes on alcohol. Typically cut with a bit of MEK

[@hupka3145]

Great vid, and some seriously nice production value. Props for the effort put into that.

[@davidshaw9395]

You need to try the Knapp Joint for your next joint of the week. “Pask Makes” put out a video on them and they look pretty awesome.

[@antiocoluca]

Beautiful KZbin channel. I've subscribed straight away, thanks for all the links in the description.

[@billqqq]

This is a great reference video. Short enough to review as a refresher, but detailed enough to provide all you need to know. I also like sikkens (maybe they were bought out recently?) Low VOC and beautiful finish.

[@X3WorkshopDesigns]

Preach it man. I only spray poly finishes also. It yields way better results than brushing it on. I'll give your "Goo" a shot man. I starting making cutting boards and quickly realized that wax is getting pricey to reapply.

[@X3WorkshopDesigns]

G S nah man. It’s smooth as silk. Depending on the project I’ll use two coats sometimes three with light sanding in between each coat. That triple thick is terrible. I had poor results with that as well. I just use varathane water based poly or oil based depending on the application.

[@מעייןהמלבלבתחייםםםם]

You are crazy Sharp!! Always like your videos!

[@rbsa1980]

thanks for this helpful video, got my answer about a decorative piece finish

[@andybrooks4070]

Im a novice woodworker and I just use a boiled linseed oil, I got it for an axe I was hanging and It looks very nice and helps keep the wood saturated especially in the head so it wont come loose, or so ive heard Im not really sure if any of this is true but this is what the kids on the block say

[@tylersmith293]

Exactly the information I was looking for. Very helpful.

[@lcbcreative2379]

I have watched this video multiple times over time to see how to make and apply the finishes. Love the make your own finishes. They work amazing.

[@Bshwag]

I brush on that varithain water based poly and it smooths out as it dries like no other poly I have ever used.

[@jameskass4415]

Thanks for sharing this, JKM, I use shellac on all my stuff now. Also bought one of your stop blocks and use it with the sled Tamar designed. Kudos for all the work you put into your videos! Someday I'll work up the patience to try my hand at dovetails...

[@cybertree]

For some reason im in love with that "dripping with glass" high gloss polyurethane/lacquer look. Which worries me because 90% of all experienced woodworkers want it looking matte!

[@osamarin]

Really excellent video! Many Thanks! What type of finish would you use for a new woodworking workbench?

[@rebeccalankford8573]

Quick is not always best but I understand the draw backs and benifits of the waiting time.

[@unclebob8746]

Any experience with a 50/50 mix of 100% tung oil/orange peel oil for cutting boards. Or coconut oil instead of mineral oil. Mineral oil never really dries....

[@rhihodag9873]

VERY informative vid, Jonathan! Thanks for sharing your "wisdom". I see more woodworkers reverting back to shellac as the the base coat of finish on projects. Great video! Thanks!

[@GeeDeeBird]

Replace the mineral oil with coconut oil in your beeswax blend for a wonderful non petroleum finish.

[@stadenart]

Thank you so much for an awesome video. As with all your videos your explanations are very informative and easy to follow, but you really out did yourself with this one. Finishes have always been a mystery for me and my projects tend not to look the way I want. I will definitely try a couple of these finishes and your techniques. I just ordered your shop apron to throw some support your way. I eagerly await its arrival.

[@artijl]

Fabulous video. Love how you sum up a lot of good options, uses, creating mixtures and how to apply all in one viewing 😊

[@espnmk]

thanks for the tips JKM , beautiful looking cutting board and with the finish on it, it just POPS...

[@ZaMPATESTE]

Gorgeous! How about linseed oil? I personally love how enhances the wood grains

[@katzmosestools]

I think every finish does about the sme thing. Linseed oil is great but offers no scratch protection

[@BiggMo]

Fun fact: shellac is used as a finish in candy making. When cut with a natural/pure alcohol it is considered food grade. Therefore a perfect finish for kids toys (for those of you non-breeders, kids have a rep for chewing on almost everything)

[@katzmosestools]

Cool fact!

[@hakancarlsson2881]

And if you tell them it's soaked in spit from bugs they don't want it in their mouths anymore! 👍

[@BiggMo]

Håkan Carlsson: its a bug excretion - more like bug sweat (not sure which is grosser to imagine) 🤮

[@hakancarlsson2881]

@@BiggMo Yeah Yummy!

[@proudcanadianeh4663]

Thank you for the awesome video! How often would you recommend reapplying the cutting board wax? How long does it last. Thanks.

[@willemvanmaanen9655]

Once again thanks for the clear and educational video 👍🏻👍🏻👍🏻

[@gutierrezc8709]

Would you lacquer a dining room table?

[@0ddSavant]

Good stuff. I really like your content. I usually watch them a few times to glean everything from them. I was working with a beeswax finish when I first saw this video, then I rewatched when considering finishes for a different project. Keep up the good work.

[@katzmosestools]

Thank you my friend!

[@bobkrause0103]

This video is amazing. Thank you for the best info

[@jerryrichards8172]

Little trick for lacquer is to melt the product down with lacquer thinner. When spraying lacquer on piece with multiple parts or a big project the lacquer can dry so fast you can get flash on your finnish. Thus is where when spraying your product may land on parts of the finnish that has already hardened and leave a dull sandy feel/look. Load your spray gun with strait lacquer thinner rapidly respray the project. To much thinner can cause runs if to heavy like any spraying product. a bit advanced but can really help when its hot or lots of angles where the spray can land back on the project and cause flash. Where a respirator have fun.

[@joebaker5421]

Thanks for the video. I think I need to try shellac. For me favorite is Waterlox. Love that stuff because how exotic woods look with it. Really brings out color and depth and is durable enough for me. I don’t use it anymore because importing from the US to Europe is so high. Now I use a danish oil but it doesn’t seem as good though they are very similar.

[@polocash11]

What should I use for a shelf over washer and dryer? 63x24. I was leaning towards lacquer, but may not good around water. It is plywood with birch laminate.

[@bryanproskiw5554]

Excellent Video

[@chrispierce7477]

If building end tables or coffee table, which are in high use, what would you recommend for the finish? Preferably a layered finish.

[@Recovery12Life]

Try one of the small foam roller with the epoxy it works a treat

[@Ryan-td3td]

great video, thanks. Would you have any tips on which finish and what method to use on a project that has difficult to reach areas, such as slats on an indoor entryway coat rack, bench, and shoe rack?

[@garykassel2658]

Jonarthan Do you have a movie on how to make your blast gates I am using 4 inch PVC for my vac system Thanks

[@MrFreddyboy246]

Would love to see you make a Knapp Joint👍👍

[@fishingthebreakline7065]

Videos are super helpful and useful!

[@briandekker9264]

@Jonathan Katz-Moses Thanks for all the great video content. I love your channel and I am anxiously waiting for my no deflection stop block and apron to arrive. During this video you say that the ratio is 4 parts beeswax, but in another video you say 4 parts mineral oil to one part beeswax. I made it as in this video and it is a solid mass. I guess I can just re heat it and mix in a bunch more mineral oil.

[@danwalker988]

What would u use for an outdoor cedar kitchen table?

[@joereichert3336]

I loved the cutting board on the video. Do you have a plan for the cutting board?

[@dolphinberserk]

Heat gun over epoxy is a great tip!

[@snh_lname]

Do you have a link to the cutting board video? My wife loved it.

[@katzmosestools]

Itll be out soon

[@katzmosestools]

Welcome my friend

[@robertm691]

Awesome video and super helpful! Question for you. Do you stain your projects? If so, any tips or tricks for staining? Struggling a bit with staining. Thanks!

[@mitchumsport]

yes, shellac is the excretion of insects who live on sap. the color is caused by the type of tree they feed on. it's also used on food

[@bigbomb5904]

Can you do a video on how to make the beeswax and mineral oil mix

[@braindeadbzh]

Have you ever thought of, or tried, to mix glossy and matte finish to draw pattern? You can see that sometime on car and it look so cool.

[@katzmosestools]

I haven't. Sounds like you're just going to end up with a semi gloss you couldn't replicate when you run out

[@braindeadbzh]

@@katzmosestools sorry, I might not have been clear enough. My idea would be to apply a glossy finish all over the workpiece. Then mask it to create a pattern where you apply only matte finish.

[@arm1687]

@Jonathan Katz-Moses thanks for this video, it's great. I've been loving shellac and the goo! Question - any tips for applying finish to assembled projects? For example the inside of a box - what's the best way to hold the piece, reach the corners, etc. Thanks, I love your videos!

[@charliehilbrant]

Jonathan, you are so great on camera

[@mikeamboy7292]

Curious why you prefer the waterborne finish to the typical oil polyurethane ? Other than set time, I don't know of any advantage. Other than that I completely agree with all your other preferences. Most of my furniture gets a French polish, final coat is Royal Lac if it will be a table top. Kitchen cabinets get poly for the very reasons you outlined. Great video. Thx!

[@BradsWorkbench]

Great video. Ive got one coming out tomorrow about my super secret paste wax finish 👍

[@akesq01]

Great helpful video. Thank you!

[@shednut2666]

Wondering did you show how you made that cutting boards Thanks for sharing

[@thesplinteredfinger]

Great video as always Jonathan!

[@guyjones4936]

Of the finishes you just covered, which one do you think would be the most durable for use on a wall hanging tool cabinet. I plan on only placing my top end tools in the cabinet and I want a finish that will compliment the nice tools.

[@katzmosestools]

I would go with lacquer for sure

[@Omnivorous1One]

For the bees wax one, do you have to use a chafing dish or crock pot? Could you just put the container in a shallow pot of water or a double boiler set up like you would use to melt chocolate?

[@hedgeapplehomestead2816]

What is your recommendation for end grain finishes

[@jettkeyser9909]

Nice...About to get an HVLP

[@uncleredneck3802]

My shop is only heated when I'm in there since it's a small metal shop and I use a propane heater. So will shellac freeze since its denatured alcohol or be affected by cold temperatures. Iv had frost on the roof inside in realy cold weather. Love your video's.

[@jeremymoskaluk5444]

Great info. Thank you! Time to try some shellac!

[@caseyjones466]

We just bought live edge magnolia slab pieces for open shelving in our kitchen remodel. They will be more for decorative display than functional use with dishes sliding on and off of them. There is no sink or dishwasher underneath them, so what finish would you recommend to keep the absolutely beautiful grain showing while keeping them protected?

[@itai.617]

Whats your opinion on tung oil and also great video :)

[@Greatgadgetsgear]

Any ideas for one product to use on both raw unfinished wood and stained wood? My workbench is a mix of both. Thanks