Kawasaki Bayou 250 starting issue solved!! Starting circuit explained.

[@jonfrederick9232]

good job with this tracing. you answered a question i had in the video

[@grizzlymotomotorsports1029]

Thanks for your comment! I’m glad to help!

[@t.e.h.7711]

So I bought a new switch assembly and it still doesn’t start with the push button. What do you think ??

[@grizzlymotomotorsports1029]

So do you have power on the Brown wire going into the switch? Do you have power going out of the switch on the black wire? If so go to your starter relay and check that you have ground on the black and yellow wire. Power on the white with red stripe wire, then you should have power on your black wire when you hit your start button. If you have those on the three wires at the starter relay then check if there’s power coming out of the main really to starter when you hit button and activate relay. If you have everything the relay needs but it won’t push power through then bad relay. If you have power going through to starter then bad starter.

[@austinhayes1733]

What volt meter is that? That's nice as fuck

[@grizzlymotomotorsports1029]

Amazon special. Test light amzn.to/3z0tWWM