KAWASAKI Z900 SC PROJECT DB KILLER REMOVAL DIY

[@derjaxxer]

2 important tip, its easier to just take the exhaust off and then push it out from the inside, and if you consider putting it in and out again, take a file and file down a bit of the outer layer of the db killer. It then gets a bit thinner and you can put it in/out much easier. Good luck :)

[@FullT95]

Thanks for the tips! Please subscribe

[@Kc-sm4un]

Is this classed as a euro 5 cause they saying Db killer can’t be removed any more?

[@rarerimsnl]

Hij klinkt prachtig het is elke keer mooi om je voorbij te horen rijden !

[@FullT95]

RareRims Benelux bedankt!

[@froggis8606]

This noise makes people ill, if they live next to a street. Ever thought about this??

[@rclarke2456]

@@froggis8606 I'm a doctor what are their symptoms ☺️

[@FrankBeckers-n3k]

@@rclarke2456 Hahahahaaaaaa.... That is a good one !

[@slongsling7184]

very cool exhaust shape

[@bmwm3man]

Subbed for the exhaust clip and awesome video quality. Keep up the good work.

[@FullT95]

Thanks!

[@dennisphen13]

You didn’t have to drill into the end cap right? Just undo the one bolt and pull it out with the method you showed?

[@FullT95]

Yes!

[@Snotroggel453]

Zit deze uitlaat niet te dicht tegen je hiel aan? Heb je daar enigszins last van?

[@aboleira23]

Hi! Where did you bought those headers? Im searching some cheap ones for my z900, thank you men!

[@FullT95]

Adolfo Boleira mine are from sc project €650, black widow can be an option for you, don’t know the price

[@aboleira23]

@@FullT95 okey, thank you!

[@antoniofinocchiaro2433]

Posso chiederti se il passeggero strofina la scarpa sullo scarico?

[@flippin4502]

Is it just to knock off the weld covering the screw? adn then use a little force? Got same system as you

[@FullT95]

Fredrik Rosén little force is enough for unscrewing. Knock off the weld is not necessary but if you like to ... goodluck!

[@flippin4502]

@@FullT95 But i mean i cant even see my screw, Its like a lid welded over it or something idk

[@ThLazyMan]

@@flippin4502 same problem, somehow some db-killers of those SC1-R exhausts are welded.

[@flippin4502]

@@ThLazyMan did you remove your db killer?

[@ThLazyMan]

@@flippin4502 I could by drilling a hole in the carbon end-cap or removing the carbon end-cap. However I chose not to do that, because the hole would be on the top side of the end-cap.. I might do it in the future

[@Peter.DM.72]

SC1-R or SC1-M? Thanks. 😉

[@FullT95]

SC1-R with carbon cap

[@lorissll7882]

This is collector titan ? Or inox ?

[@FullT95]

inox

[@thanachai.j]

FC form Thailand🇹🇭🇹🇭🇹🇭🇹🇭

[@Yii00T]

Is this a full SC system m8?

[@FullT95]

Yes!

[@Yii00T]

@@FullT95 sweet can I ask where you purchased it. Ill be after something similar when the time comes lol.

[@FullT95]

@@Yii00T femonparts nl

[@Yii00T]

@@FullT95 thanks m8 subscribed as well.

[@FullT95]

@@Yii00T thanks m8!

[@ThLazyMan]

Was hij bij jou niet vastgelast?

[@FullT95]

Ja een klein beetje. Met wat kracht komt de bout direct los

[@ThLazyMan]

Bij mij zit er nieteens een bout. Het is een vastgelast dopje.. :(

[@FullT95]

Dan heb je een recentere versie misschien.... er is altijd een oplossing😀

[@bioarm4]

Power your Z900? Horsepower?

[@FullT95]

100

[@bioarm4]

@@FullT95 no 125 or 130? Is a z900 A2?

[@FullT95]

A2

[@mikesurong7315]

Please give me the model number of this sc project exhaust because there are many sc Project exhaust for this bike but they are of different designs

[@FullT95]

SC1-R

[@mikesurong7315]

@@FullT95 thanks man

[@jonathan-hr7uf]

Veel luider zonder db killer?

[@FullT95]

DB killer doet toch veel hoor !

[@Peter.DM.72]

Hi, what is the exact model of that exhaust? Order number? Well thank you.

[@moritzchristmann5243]

Sc1r sc Project

[@Ali-mf7cg]

Ik merk tog wanneer ik een db killer berwijder dat zo’n motor compressie verliest.. hij gaat tog echt minder vlot vooruit

[@Snotroggel453]

Klopt helemaal je verliest die low end torque..

[@niovroem610]

Die gaat er lastig uit

[@FullT95]

Ja ik wou de demper ook niet meehebben maar met een beetje geduld en kracht komt ie wel. Had er veel gezien met een knijptang maar dan vind ik deze manier wel sneller en veiliger naar schade toe😀

[@hamzaashraf5990]

i want this exhaust

[@FullT95]

Buy it then :D

[@slawomirgontarz618]

a bit too much work to pull db-killer on the street ;) it must be MYK-MYK! And there is no db-killer! ;

[@mrinalr1557]

Slip on..

[@STORYVIBE882]

dik!