Kayak Trolling Motor Project is Complete and Awesome!

Wilderness Systems Ride 115 gets a trolling motor. Walk around of final product. Really exceeded my expectations, everything works exactly as planned.

[@johnparrish336]

Great build. Looks like what I need for my 115X. Thanks for posting.

[@DukeSky]

Very nicely done Dr. Tahoe.

[@cornbreadsfishing1036]

Great job on the rig!

[@tonylombardi2298]

nice job well thought out and designed congrats from Australia

[@uniquehomecustoms6795]

The pool noodle with the pvc was a great idea thanks man.

[@tymerone3795]

You did an awesome job great work ... have fun fishing out there catch a big one.

[@ShutterUp]

Nice clean install, looks good.

[@alsaffarstudios]

Very creative work, thanks for sharing it with us 🙏🏼

[@mikeb7351]

I'm finding this really late but still very relevant. I wish my stern was as easy as yours was. Happy fishing!

[@tonybrown3346]

Nice work, man! Very thoughtfully designed, and execution is fantastic... 👍

[@theweswillard]

Lake Tahoe Outdoors Thank you for going into detail about this. And the updated videos. I plan to replicate your setup.

[@d8alot]

Dude, you really thought this out. A+.

[@Treeline88]

The boss of yak motor setup. Tight lines.

[@PainterD54]

Great ideas! Thanks for sharing.

[@chefpinot45]

Very nice work. Cleanest install I've seen on YT, and I must have watched 30 or more videos on this subject.

[@TahoeYakFisher]

Thanks very much. It has had a full summer of fishing and I must say it works really well. I freak out every time the coin cell batteries in the remote start dying I think something is wrong but really its been flawless.

[@chasingwaves11]

Sweet setup man !

[@fisherman9077]

Nice vid! I like the wireless remote👍

[@dkhorse12345]

Nice setup!

[@jlstarman]

Very nice setup.

[@byfunkyoid2917]

Best I’ve seen. Just wow!

[@TahoeYakFisher]

Thanks very much, it was fun to put together and is really fun to fish from.

[@largesizejellyfish3014]

This is so impressive. I've always wanted a system for my kayak but i have no idea how im going to mount the trolling motor. I have a Jackson big rig and your video will help me a lot. When this semester of school ends im going to work on my own trolling motor set up. I will probably be asking you a bunch of questions when i start on mine. Your set up is probably the best one i have seen and it is definitely the simplest. Well done!

[@TahoeYakFisher]

largesizejellyfish largesizejellyfish Hey, thanks for the positive feedback. This was a fun project... ask away.

[@liamjoseph3853]

Awesome work!

[@TahoeYakFisher]

Thanks very much.

[@fisheatrepeat]

awesome setup

[@timh2908]

Great vid, I did something similar to my Predator 13. I have a Coosa HD coming on Wed and will begin fabrication of the motor for that one and this gave me a few ideas that I will change with my set up. Thanks bud, nice ideas.

[@TahoeYakFisher]

Tim H Thanks Tim, I appreciate you taking time to comment. It works really well and I had fun doing it.

[@redhunskizzle4977]

This is awsome it's like an apocalypse cyack. I want to build one now

[@ricocantera3160]

BADASS!! (my thoughts throughout the whole video)

[@johnswinkels4383]

Nice job I have seen some shockers, I have just completed mine. Wish I saw this before I like the minn koto electric plug where I used 2x Anderson plugs that can come apart. Mine is so similar in design yet some differences i have electric steer with a 4" joystick voltmeter and speed controller permanently fixed to the side hull all the cables have been upgraded to 8 gauge to cover voltage drop. I also mounted a 135 aph lithium inside the hull up front the same as you.I can send some photos if you like.

[@Hardonfishing]

I’m in the middle of doing my trolling motor install. I’m stuck at stow and deploy. I like your idea about removing the locking mechanism and adding a stop. I’m going to try it. Thanks for sharing

[@TahoeYakFisher]

Thanks, I ended up cutting the pedal tracks shorter so the steering cables could be long enough to omit the stop but still no lock necessary. I think I will put up a vid, soon, about the mod.

[@KayakhacksFishing]

Love that kill switch

[@lraffucci]

inspirational video.

[@TahoeYakFisher]

zero Thanks.

[@Robsmith1218]

Sweet!!!

[@topcat8820]

Oh yeah ... very nice 👍🏻

[@Bo-uw5ye]

OUTSTANDING.................

[@Patriot-ks6fv]

With a 1'' nylon strap with velcro, you could put the remote on your leg for fast easy access

[@Tony-BantheDemocratsnotguns]

*Like your rear mount ideal!

[@TahoeYakFisher]

Tony Thanks.

[@SmalltownBassin]

I love it! Now you need one of my high performance props that are coming out soon! Tight lines!

[@TahoeYakFisher]

Small town Bassin' Thanks, for now just a sub.

[@lonnierobinson2125]

That’s great.

[@danielbrothers2914]

that is REALLLLLLLLY.... SWEEEEEETTTTTT.....

[@jasontaylor9871]

I picture Peter Gibbons from Office Space behind the camera

[@TahoeYakFisher]

I love that movie, gutting fish on "tps reports"!

[@eugenecole652]

This is the first ride I've seen with trolling motor. I would really like to put one on my ride 135

[@eugenecole652]

Nice work

[@TahoeYakFisher]

@@eugenecole652 Thanks very much.

[@Harlanmote]

Yes you did a superior job..

[@SilverShadow2LWB]

Very nice and clean set-up. Thank you for the excellent demonstration. I would like to do something very similar but in a California legal set-up. Can you give a follow-up video to show how it performed? Thanks

[@TahoeYakFisher]

I have registered this kayak in CA, it was easy and the kayak has performed flawlessly. I will do a video on the registration process asap, thanks for watching.

[@addictedjr3553]

Badass

[@jelly_fishing]

Nice

[@DuckySlimes]

Awesome set up man! What size split tubing are you running from the motor to the plug and how did you attach them? They look water tight!

[@Goofy948]

BAM

[@nathancatlin3849]

Don't forget your registration #s now that you have a motorized kayak. Good luck, great fishing.

[@TahoeYakFisher]

nathan catlin The ugly numbers. I have been playing dumb while testing but I will register this spring.

[@patsag793]

I need to qualify that......should be in my opinion. Thxs

[@Billbobaker]

That double pull is called a block purchase.. Cool video.

[@TahoeYakFisher]

Bill Baker Thanks Bill.

[@Fishnfatman]

Good video very informative I enjoyed it I'm thinking about getting into kayak so any info I can gather is helpful , I have a small KZbin channel just getting started so I enjoy seeing other people's content

[@rayg3074]

cool

[@johnlowder6043]

Excellent project and video. I'm looking to begin a similar project with my Ride 115 to assist in tidal tributaries on the Carolina coast. What was the source of the sliding pedals for steering?

[@TahoeYakFisher]

John Lowder Hi John, thanks for the compliments. The pedals are the "tandem rudder module" from Wilderness Systems. I called WS and at first thought I might have to buy the whole rudder kit, WS literally used 'caller ID' to call me back because the rep came across the tandem add on. Hope this helps.

[@NovemberContent]

Very well done! Any plans for an anchor trolley on both sides?

[@TahoeYakFisher]

Corso Thanks for the feedback, this kayak is really just for trolling on Tahoe so I don't use or need an anchor. I do have a cool anchor trolly system on my small lake boat and a vid on my channel on how I set it up... check it out and let me know if you want something different and I will see what I can do.

[@bradleyvickers8312]

Excellent setup, its very neat and efficient. Did you make that wireless remote or is it stock Minn Kota? Ive recently added a motor and starting with a wired pwm speed controller remote but wireless would be a great future project.

[@TahoeYakFisher]

Bradley Vickers Hey there, thanks for watching, glad you like it. The remote is a product of "Wireless Trollig Pro", nice folks... Leon will build you a custom unit however you like.

[@cle5823]

Looks pretty nice. What kind of line did you use for the motor lift? I was thinking about using Paracord and a similar cam cleat.

[@TahoeYakFisher]

Thanks, I used black braided nylon rope. I'm not sure paracord would work as well, the sheath is slick and the inner cords may flatten out under the pressure of the cleat. Good luck, let me know if I can help.

[@jangofet3756]

Kungfu Panda!

[@TahoeYakFisher]

Thank you... I think?

[@bigalcervantes5118]

Dammm fantastic set up, I wonder if i can do the same with my eagle Talon yak. I'm in saltwater so i will have to use galvanized hardware.

[@TahoeYakFisher]

Is the kayak "rudder compatible"? If it is I am sure you could. Also consider where you would store the battery. It was a really fun project but I am a pretty handy guy, consider BassYaks, that guy will sell you a kit or parts of said kit so you can DIY what you like but might be a nice head start. Really it was the BassYaks kit that made me decide that I could figure it out on my own.

[@TahoeYakFisher]

Also buy a saltwater specific motor.

[@allanhalls6335]

Great set up. Questions re your battery and run time. Do you know the weight of each 35ah battery? Is your TM the digital maximizer type? Can you comment on the run time you get with the parallel set up? Finally - how does the weight up front work out for you? Thanks!!!

[@TahoeYakFisher]

Allan Halls All the right questions, finally. Batteries are 25lbs each, they work fine in the front of the kayak for two reasons; its a 500# capacity and the seat slides back quite a bit to offset the weight. The Wireless Trolling Pro switch is a variable switch so... it has a "low voltage cut off" that I have not experienced with the two batteries, 6+ hours of trolling and running full speed in and out of the marina. Charge times indicate a longer run time is available.

[@allanhalls6335]

Appreciate the info!!! All the way from Ontario, Canada.....

[@genes1212]

like you setup i think. i will do something similar nice

[@johng337]

Nice set up... have you had many issues with your lines getting tangled in the trolling motor? I have a NuCanoe Frontier 12 foot with a Minn Kota off the back and especially on windy, wavy days running two rods it can be a real pain. Even sometimes running one rod I get tangled in the trolling motor and as much as I love to fish it can be pretty frustrating. Trying to troll into the wind or with the wind, and not to the side of it, has helped along with no longer making "S" turns to trigger a strike but I just had a bad day yesterday on the water trolling for kokes and am wondering if you have any tips. Cheers

[@TahoeYakFisher]

I did get my line caught in my motor within a couple trips and have since moved my trolling position to a rod holder mounted to my milk crate behind me. I only troll one line at a time but with it mounted behind me I can turn my boat as sharp as I like making "S" turns. My rod tip is almost behind the motor and 7' off to the side. Hope this is helpful, thanks for watching.

[@badmofo350]

Very nice setup. Have you had any issues with the Wireless trolling pro remote/speed contoller? Thanks.

[@TahoeYakFisher]

No, I have not had issues with the remote, other than the fact that it is not waterproof and I wish it had a lanyard. I do freak out when the coin cell batteries it runs on start to die the remote loses connection, once I figured that out and put spares in my kit it's been flawless!

[@badmofo350]

@@TahoeYakFisher thanks

[@aravarra1]

Are you using 10awg or are you matching up the wires that come from the motor (14awg)?

[@lloydboone7185]

I'm still in the planning phase of modifying my Prowler 13 Kayak with a trolling motor. I bought one of those wireless kits like you have. My question is, do you worry about losing the remote in the water and is it waterproof ? I'm thinking about putting it in a waterproof cell phone bag and latching it to the chair. Any tips?

[@TahoeYakFisher]

Lloyd Boone Hi Lloyd, thanks for watching... Yes I am a little worried, no it is not water proof. I am actively considering a solution, maybe velcro, maybe some sort of device mount. Right now, my kayak seat has a pouch between my legs that the remote fits in, works great but not totally secure.

[@ashx2]

Tahoe YakFisher, that's a superb job you've done there! I really like how clean everything is. I have the WS115X and have been looking to put just such an outfit on mine. Do you mind if inquire about the costs minus the aluminum bracket (I have access to lots of aluminum materials) and also.....did you do the change on the shaft of the trolling motor or did you buy it that way? Thanks from the Lonestar State! Greg A.

[@TahoeYakFisher]

Hi Greg, thanks for the nice comments. Not sure what shaft modifications you speak of? I did remove the stock tiller/ throttle head from the motor/shaft and used a PVC elbow to cap it. But, in short, yes I made all the mods myself. I paid about $110 for the Minn Kota endura C2, $130ish for the Wireless Trolling Pro kit, batteries were about $100 each, the WS rudder pedal kit was about $100 bucks and another $100 in materials like rope and pulleys, cam cleat, stainless hardware. Hope you give it a go, I love mine it performes really well.

[@travist7845]

Great vid! I’m torn between bow mounting or stern mounting mine. I’m leaning towards bow because of turning on a dime , easy turn , easy stow and quick access if I have issues. Why did you run with a stern mount ?

[@TahoeYakFisher]

I am trolling for Mackinaw, pretty big fish. They turn the boat around as I fight them but I keep them in front of me, for the most part. I wouldn't want the motor in front for the fish to wrap the line around. I can let the fight run port to starboard around the bow... even when I'm jigging I will switch sides of the boat with drift, getting the line around the bow with a motor in the way would be tough. BTW, mine still turns quick. Also check out my channel, I just put a motor on my new kayak. Thanks for watching and the comments, good luck, let me know if I can help.

[@TahoeYakFisher]

I think also because of rough water conditions. Tahoe can almost resemble "offshore" conditions and a bow mount might be out of the water a lot in bigger swell.

[@turboroush]

I really enjoyed your video and how your set up is can you provide me a link to the Duracell batteries you mentioned in the vid.

[@TahoeYakFisher]

turboroush Hey there, thanks for watching and the nice comment. Here is the link you asked for; www.batteriesplus.com/productdetails/SLADC12=35J?locationofinterest=&locationphysical=9032735&gclid=EAIaIQobChMIyqKXio692QIV3LbACh2QnAb-EAQYAiABEgKzxvD_BwE

[@k9kayaks]

Been enjoying watching your videos and Scribed. Forgive me if I’ve missed any section where you mentioned “cost” but what was the cost for the battery, mount & trolling motor set up ? Exploring the idea for my #BigTuna Thank you

[@Wickedshifts]

How has the hobie rope held up to use? Noticed any stretch? im about to start the install on the motor steering system on my Big Fish 105 and don't like the idea of using a stainless steel braided cable that could cut through the nylon hose it slides through and eventually into the kayak.

[@TahoeYakFisher]

It heald up really well, minimal stretch, no trouble whatsoever. This is what I used on a recent motor kit, it is also working well but less expensive. www.amazon.com/dp/B07BKRR8PN?ref=ppx_pop_mob_ap_share I used 1.3mm

[@Wickedshifts]

@@TahoeYakFisher Excellent. Thanks for the info and the link!

[@victorxavier9977]

Very cool install! Do you think there is any advantage to running this setup versus a torqeedo or Bixby system? Thank you in advance for your help!

[@TahoeYakFisher]

There are two advantages to my kit, in my opinion. First: cost, my kit uses a $100 Minn Kota motor and a $130 PWM from Wireless Trolling Pro and two $90 batteries, this all is the second advantage, parts are readily accessible and cheap though I have not needed to replace anything. Look at Bassyaks also, I would buy his kit and customize it to my needs before I would buy either kit you mentioned. Hope this helps, let me know if I can answer any other questions.

[@victorxavier9977]

@@TahoeYakFisher - Sweet thanks for the quick response and I'll definitely check out bassyaks! Also subbed!

[@09ironman1]

Where did you get all your equipment remote control

[@acadventures7799]

Do you have any pictures of the transom mount before you installed it? Im trying to have my friend make one for me.

[@TahoeYakFisher]

I don't, but I can take some detailed pics and email them to you. Hit me up at [e-mail]

[@shortyintexas1142]

Great video and mod. Do you have a link to the remote control variable speed switch? Or where u purchased it?

[@TahoeYakFisher]

www.wirelesstrollingpro.com/catalog.html Not easy to get ahold of these guys sometimes, I think its just a husband/wife team but if you get a unit they work pretty good... truth be told if I had it to do again I think I would spend the money on the PWM and switch from Minn Kota, way more money but completely water proof, it is wired to the remote but that can be worked around. Minn Kota doesn't talk about these parts as they want you to purchase a kayak prebuilt with a Minn Kota motor but the parts you want are the replacements for their "engine mount" motors.

[@shortyintexas1142]

@@TahoeYakFisher I appreciate the response and your Idea. I tried a cheaper variable switch but it got hot and burned up. I'll look into Minn kota and check that one out

[@rsm1419]

Where were you able to find the steering bracket on the shaft?

[@TahoeYakFisher]

Richard Moulis Hi Richard, thanks for watching. I bought it from Torqeedo dirrectly. I had to sweet talk a little, they have a flat rate shipping charge that was too high. I found it at one kayak accessorie store but never called them.

[@quintriggins6557]

Nice set up. Can you provide a link to your source for the Torqeedo steering bracket? Thanks

[@TahoeYakFisher]

Quinton RIggins Hey Quinton, Thanks for watching and I bought the steering bracket directly from Torqeedo, it took a little sweet talking as they had a flat rate shipping rate or something. Good luck!

[@quintriggins6557]

Thanks

[@Robsmith1218]

How much was the steering triangle? Was it a problem ordering just that part?

[@TahoeYakFisher]

Robsmith Hi Rob, I got it direct from Torqeedo. It was no hassle but expensive due to a minimum shipping charge. Thanks for watching.

[@littykittymusic7601]

get some springs that have give and and install under the left and right steering cord connectors

[@TahoeYakFisher]

LITTY KITTY MUSIC Sorry, why?

[@littykittymusic7601]

Tahoe YakFisher I’ll try and post some picture of my rig. The springs provide tension when turning the motor. They will also force the motor to center position without automatically.

[@markleggett2833]

Can you tell me how wide your transom motor mount is? Specifically the square channels.. Thanks very much..

[@TahoeYakFisher]

6 3/8"

[@robrykena3669]

Hello. This is a great build. I'm just getting started on mounting my trolling motor to my pelican. I would like to duplicate your set up. Is there any way I can a list of your components please?

[@TahoeYakFisher]

That kayak was fun to build and fish! Take a look at my channel, I go further in depth on the build of my Recon 120, including parts. Hit me up if you need a pwm/speed controller! Thanks for watching.

[@abiermonier1193]

Good video. I liked this model of motor because it has remote control. You could tell us the model or give us the link to buy it. Thank you. that you have good fishing.

[@TahoeYakFisher]

www.wirelesstrollingpro.com I bought the wireless kit from these guys, it will work with most trolling motors. Hope this helps, thanks for watching.

[@concordroofer1073]

great video. do you have any vids on the mount? do you need cf numbers b ecause it is motorized? thanks for taking time to share with us...Ken in Contra costa

[@TahoeYakFisher]

Concord Roofer Hey there, thanks for watching and yes I do need CF numbers, I hate to admit I have been lucky so far with no law enforcement interaction. I went to DMV once and the guy had no idea how to process a kayak without a title... go figure. As far as the bracket goes I didn't video the fabrication but it would be a little different for different models. Mine is 3/16 aluminum sheet and 1.5×1.5 square tube welded into a 3×1.5, the seam in the middle keeps the motor clamp from crushing the box. I watched a bunch of vids and combined everything I liked, one company worth checking out is Bass Yaks, pretty well thought out kit but he likes bigger motors. Hope this helps.

[@concordroofer1073]

thanks for reply that helps....used to go up to inlaws on alice lake rd love tahoe. enjoy and thanks again

[@NewWaveNetMarketer4u]

Really Nice Mod !! Congrats !! May i ask for your help with the parts and general direction to assemble ?? This would be tremendous mod to my yak !!! Thx Jim in NH

[@TahoeYakFisher]

Jim Hi Jim, thanks for watching. What make/model kayak do you have?

[@butterbill1845]

Random question - does the remote have an indicator light when on? I hooked all my stuff up today (triple checked wiring) and no luck. Dont know what to do! Love you're build btw. Have a radar115 myself. Stole the battery holder and soon to be the motor lift!!!!

[@phillipjacobson4498]

If you wire 2 battery's in parallel for 24vdc. And hook up your 12vdc trolling moter to the 24vdc pack you will get double Rpms. But less moter life!. See you tube vids on 24v power wheels kid cars. If you need more run time amp hours wire 4 battery's in series parallel.

[@TahoeYakFisher]

Two 12 volt batteries wired in parallel is going to remain 12 volts... I believe you mean wire them in "series" which would produce a 24 volt battery but understand this, two 12volt 35ah batteries wired in parallel produce a 12volt 70ah battery while the same two batteries wired in series produce a 24volt 35ah battery. This would be counterproductive for my application, I am, mostly, trolling which means I want to go slow for as long as possible, I don't need power, I need amp hours. Thanks for watching.

[@phillipjacobson4498]

@@TahoeYakFisher my mistake you are correct. Some viewers want there trolling moter to go faster. I'm not sure if the props will hold up. But the water cooled moter should.

[@k9kayaks]

Very nice set up. Did you make the mount, is it aluminum ?

[@TahoeYakFisher]

Thanks very much, it is aluminum and yes, with the help of a friend/fabricator we made the mount.

[@k9kayaks]

Lake Tahoe Outdoors Thank you.My #BigTuna JacksonKayak has a similar steering set up

[@509outdoors9]

I can not find that throttle control system anywhere, I'm looking to do exactly what you did for steering and throttle control. Can you help me out?

[@chrisdavison2022]

www.wirelesstrollingpro.com/controllers.html

[@DryUrEyesM8]

Speaking from experience battery in the front kinda sucks. The bow sinks lower and you plow water instead of gliding on top of it. Also when you run out of battery it makes paddling a bitch. I was using a 110 agm that weighed a lot more than your two batteries though so maybe you won't have as big of a problem with it.

[@TahoeYakFisher]

DryUrEyesM8 This kayak has a seat that slides back to expose a standing platform and slides forward to paddle, slid back a couple inches offsets the batteries to the boat planes well, perfect kayak for the set up.

[@jackgold8382]

how long will a 30 lb motor run on a motorcycle size battery? thanks

[@Harlanmote]

Jack Gold Not long, get a good deep cycle battery. It will last for hours and hours. I have a 18’ Alumacraft Bass boat and one 12 volt battery will last all day long if you don’t run it on high all the time. I set my motor on 2 or 3 and it last a long time. And it at least a 800 to a 1,000 pound boat. I use Interstate Battery’s not the junky Walmart battery’s, they don’t last..

[@svfd3855]

how do you keep motor from ramping out of the water when you go into revers without the lock system?

[@TahoeYakFisher]

mike barfield Hi Mike, thanks for watching and taking time to ask. The steering cables are below the pivot so the pressure if your feet on the pedals keep the motor where it belongs while in reverse, works great.

[@svfd3855]

thanks a lot as mine is set up the same way on my sea ghost, i didn't remove lock yet as i didn't know if it would stay in the water but now i believe like you said it should be fine

[@TahoeYakFisher]

mike barfield No worries, I think the lock consists of 3 parts and could be put back together if you don't like the way it works but my setup works great forward and reverse.

[@michaelsavage3244]

Could you post links on parts so we could build that?

[@illushun1703]

Loving it! would your friend be able to hook me with the motor bracket? I have the same kayak as yours

[@TahoeYakFisher]

It was fabricated for the Installation, I'd have to give him my mount to repeat and hope our boats are exactly the same. If you give me an email address I will send you a detailed picture of my mount to show any competent fabricator near you.

[@illushun1703]

@@TahoeYakFisher are you able to setup a business in-query email for me to send you a message?

[@maybonphuongtroi9281]

Don't see you mention much about battery . I have a 8.5 ' Kayak , a Minn Kota -30 . What kind battery should I have ? Is the Dakota 12 V , Ah 20 OK ? I like the light weight of it ( 6;5 lbs ) Or should I Use the Dakota 12 V , Ah 10 ( weights 2. 14 lbs ) ? Or can you recommend me another battery ? Thanks

[@TahoeYakFisher]

Take the AH of the battery and devide that by the amps drawn by the motor you have and you get the time it should run at that draw... that being said I have two 12v 35ah batteries wired in parallel for a total of 70ah. I am using agm wheelchair batteries, they are 25lbs each. At trolling speed I can go for up to 7 hours. Hope this helps, thanks for watching.

[@maybonphuongtroi9281]

Tahoe Yakfisher :Thanks for reply so soon .. This is my first time to try kayak . I don't know anything about battery for trolling motor . I just looking for a light weight ( Under 10 lbs) deep circle battery to run my Minn Kota 30 with desired range between 2 to 3 hours at minimum speed for my 8.5' kayak . So please recommend me one . Thanks

[@TahoeYakFisher]

@@maybonphuongtroi9281 battlebornbatteries.com/shop/50ah-12v-lifepo4-deep-cycle-battery/ I recommend this one, it's a little more than 10lbs but not too heavy, really great batteries.

[@haciendadad]

@@maybonphuongtroi9281 Here is a battery for trolling motors on kayaks www.amazon.com/gp/product/B00K8E8M1C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

[@TahoeYakFisher]

@@haciendadad That is the same (different brand) battery I am using two of, run in parallel for double the run time... Thanks for the link.

[@daviddaigrepont9485]

Could you please give a parts/cost list or approximation?

[@TahoeYakFisher]

Minn Kota 30lb. Endura C2... $110. Minn Kota plug... $30. Torqeedo steering bracket... $30 Hobie "rope"... $12. Wireless Trolling Pro controller... $130. Batteries... $100×2. Pulleys, cord, cam cleat... $40-50. Various hardware... $50, maybe. Transom bracket... $0. Fabricator is a buddy. Rudder steer parts from Wilderness Systems... $100. Pretty sure that's it. I will add if I missed anything. Hope this helps.

[@rayg3074]

cool remote … where can find?

[@TahoeYakFisher]

www.wirelesstrollingpro.com

[@andreweddy86]

I had 3 burn out with less than an hour run time. Dont waste your money.

[@am12band18]

So what is name of remote gear? Must have missed it.

[@TahoeYakFisher]

They have disappeared, I am, however, selling my own version now. Check out this vid... kzbin.info/www/bejne/gomohqeFmNuAjas

[@ls_johnny]

Were did you get the remote?

[@TahoeYakFisher]

Jonathan Nava www.wirelesstrollingpro.com/index.html Here.

[@lennyphilpott9136]

how long does the remote last before the battery dies?

[@TahoeYakFisher]

15ish hours is my best estimate.

[@TahoeYakFisher]

This is what I am using now... kzbin.info/www/bejne/g2OQip-vab6codE

[@PointBlankYa]

Can somebody please let me know how to wire the minn kota plug and receptacle its seems every single video ive watched nobody explains it

[@TahoeYakFisher]

J J Hi JJ, the plug will do 2 or 3 wire applications. I only used 2, red and black or positive and negative. I am pretty sure on mine the #1 position is negative and the #2 position is red or positive. Hope this helps.

[@PointBlankYa]

Tahoe YakFisher thank you very much I did this exact thing red and black I created a video still need to edit it just in case anyone else runs into the problem in the future

[@richardherrington2852]

How did you acquire all the knowledge needed to set this kayak up the way you did?

[@TahoeYakFisher]

Mostly I watched KZbin videos but I am also pretty crafty.

[@richardherrington2852]

@@TahoeYakFisher Well... You certainly did a fantastic job. U.S. Army, Ret. TX

[@TahoeYakFisher]

@@richardherrington2852 Thanks very much, I appreciate you taking the time to comment.

[@censoredbyyoutube3099]

What keeps the motor from rising when moving forward?

[@TahoeYakFisher]

The steering lines and your feet on the pedals... it works really well. The steering lines have to be below the pivot for this to work but I sold this one and built a new one with a bigger motor(46lb.) and it works great on that boat too.

[@censoredbyyoutube3099]

@@TahoeYakFisher ah nice. Thanks for responding with detail. That was my only concern before I fully committed.👍

[@TahoeYakFisher]

@@censoredbyyoutube3099 I don't know where you are headed or with what kayak but please check out my channel and my newest vids on my Wilderness Systems Recon. It is pretty similar, with the bigger motor and a speed control that I am selling. I am stoked on my new kayak, the 46lb is Awesome, steady 4.2mph. I am more confident in my speed control as well.

[@censoredbyyoutube3099]

@@TahoeYakFisher checking it out now, I appreciate you man.🤙

[@markwaddell8167]

Where can I buy the remote control and pwm you're using?

[@TahoeYakFisher]

www.wirelesstrollingpro.com/

[@TahoeYakFisher]

Or this might interest you... kzbin.info/www/bejne/pqfOgJukmaebpMk