Nukatap Mini - Compact Beer Tap/Faucet for Portable Systems, Cocktails, or Temporary Keg Systems

www.kegland.com.au/products/n...
www.kegland.com.au/products/n...
www.kegland.com.au/products/n...
www.kegland.com.au/products/n...
www.kegland.com.au/products/n...
www.kegland.com.au/products/d...
This Nukatap Mini is a great portable tap that minimises first pour foam. With all the features of the larger Nukatap SS and Nukatap FC this Nukatap Mini is:
- Forward sealing so it's more sanitary
- Made from highly chemically resistant components
- Can handle high pressures up to 150psi
- Has laminar flow so it pours without excessive foam
- Low thermal mass to reduce wastage and first pour foam
If you are looking for a smaller that that is optimised for slower flow rates this is a great option. Ideally suited to portable beer keg system, smaller systems, sampling from fermenter, wine tap or cocktail dispensing.
Due to the high durability santoprene seals and robust design you will get many years of maintenance free performance from this economical little beer tap.
Installation on Solid Wall
0:00 - Intro
2:04 - Nukatap Mini with FC Ball Lock Disconnect
5:05 - Nukatap Mini with Wall Mounted Shank
8:27 - Hole Drilling and General Installation
13:40 - Installation on Esky/Cooler
15:35 - Clamp On Tap Assembly - on Esky/Cooler
17:40 - Turning a Soda Bottle Into CO2 Cylinder
20:02 - Clamp on Tap Assembly - on Fridge
21:21 - Sign Out

[@joshuapinter]

Your endless pursuit of innovation in this space is inspiring and much appreciated. Thanks Kee and keep it up!

[@KegLand]

Thanks. We appreciate it!

[@gustag]

you guys are something else in the industry... real innovation! thanks

[@KegLand]

Thanks. We really appreciate it.

[@BitterRealityBrewing]

Looks like you all have been very busy. Very creative, and I LOVE the PET CO2 bottle...brilliant! You asked for invention requests, and I have emailed this to KegLand support, but I'd love to see a plastic or rubber strapping for the FermZilla All-Rounder as an alternative to the cloth straps. Where I live, the cloth straps are a magnet for mold as the cloth can hold moisture during fermentation, and a plastic or rubber, especially an antimicrobial type, would be brilliant and an excellent alternative for those of us living in very hot and humid parts of the world.

[@KegLand]

This is a good point. I will take a look into this and see if we can come up with a better solution. Nobody likes mould!

[@RichardDePas]

Fantastic product. I've been planning a small portable system for camping. Looks like I've found my taps!

[@KegLand]

Yes I agree. For camping this setup is perfect. I am going to use one of these with my car fridge.

[@RichardDePas]

@@KegLand -can you still have road beers? 😂🍺

[@stanijackal4327]

The PET bottle as pressure vessel is genius. Did you test how many liters you get out of a keg? Is it sufficient for 2x 9L corny kegs at 5bar?

[@KegLand]

If you want to dispense 2 X 9l kegs you would need to apply over 15 bar to a 1.25L bottle. That might be a bit too much.

[@blondiesimon]

Is there a safety valve involved with the co2 pet bottle?? I could not see one in the video. If not you could be encouraging people to create small boms. Gasses at high pressure are very dangerous when things go wrong...

[@korkad204]

Thank God I need this therapy. it the end of the week😁👍

[@bishoptrees]

Damn straight

[@KegLand]

Time for a beer!@@bishoptrees

[@BassRTA84]

Ooooh, the minis will be perfect for adding an extra tap to my kegarators door and fit an extra 5ltr keg above the compressor hump. 👍

[@KegLand]

Yes I have a similar situation at home. Thanks for the support.

[@thebackyardbrewer5611]

Shanks for the new products!

[@KegLand]

Thanks for the support!

[@paulrobertson9439]

Another brilliant idea :)

[@KegLand]

Thanks!

[@bradleylemon4750]

Love the clamp on idea, was pondering putting a nuka tap mini through the door of my fermentation fridge, but the clamp on will be a game changer and allow its use in more situations. Will keep an eye out on its inclusion in the store.

[@KegLand]

We just started manufacturing these in our workshop today so they should be up on the website next week.

[@CuongNguyen89]

@@KegLand are these available for purchase? For a while, I've been searching using "Clamp on Tap Assembly" as well as the product number KL04077 but haven't had any luck.

[@danlynch2640]

@@KegLand Are you making these clamps? I cant find it on your website?

[@piratepete1961]

love it

[@KegLand]

Thanks!

[@Duci1989]

I have an invention request: make a long cooling coil that can reach the bottom of a corny and fit through the lid hole. Reason I want this: if I could transfer the wort boiling hot from my kettle into my keg where I ferment in and cool it in the keg it would 1) sanitize the keg due to heat 2) save me time because I can already start cleaning my kettle during cooling. The invention would basically be your already existing fermzilla cooling coil but with a lot more coils so that it could cool efficiently using tap water, plus it should be a tad more narrow so it fits in the keg opening. This would be awesome!

[@SteaminPile]

Amazing!

[@KegLand]

True dat!

[@jasonsocquet8555]

Love the clamp on tap adapter! You could have another version of it with an integrated drip tray. It could be made in one bent s.stl. plate :)

[@KegLand]

Yes for sure. An additional drip tray is a good idea.

[@NoMusiciansInMusicAnymore]

@@KegLand Make one that hangs off the fridge door adapter so you can buy it separately but also remove it to wash/rinse without having to take the whole setup down

[@jcinsaniac]

Can't wait until these products hit the US market...we tend to be 6 months or more behind the AUS releases. You should consider bagging up the parts for the pressure vessel and the beer serving keg system in a kit - everything you need in one go. Portable beer service has never been easier. Wish you guys would design a 3 or 4 keg extendable beer line / tap wash system.

[@KegLand]

When you say a 3-4 tap wash system do you mean to wash all the taps at the same time? I think we can do a kit like that pretty easy.

[@jcinsaniac]

@@KegLand Exactly - something that can allow the connection of up to 3 or 4 corny connectors thru the taps and then a solution to concentrate the beer taps into a return system. A small pump would circulate the flow of cleaning and sanitization products through the entire system. Even better if you can buy 2 kits and combine them to wash a keezer / kegurator with more than 4 taps.

[@herkitblu9953]

Hey Guys I was wondering if you could produce a plug and play patch cable and cover plate so that those of us with 3.1.1 Brewzilla's can easily move the screen and attach it to a wall or whatever similar to the Gen 4? Love your innovations and the fact that you are so involved with your customers. You certainly are a breath of fresh air. Keep it up.

[@KegLand]

The BrewZilla 3.1.1 is still getting manufactured but we are putting most of our resources into new products as its possible that the 3.1.1 is discontinued in the future. We will still support the model with spare parts and accessories but it's hard to justify further new product development for a older model. I will take it to the team though and see what they think.

[@ryanc3001]

definetly should put multiple 'fins' on the disconnect so the tap can clock into the upright or even rotate 90 degrees clock or counter clockwise and lock there also

[@onkelpit]

I really like that new design. If we could use that new attach hardware with the old nukataps would be great. Are there any ideas for a nukatap mini with fc? Keep on bringing new innovation to the market. Love it. Cheers from Germany

[@KegLand]

The tap is already quite difficult to manufacture. It's going to be difficult to have a FC function in such a small tap. We will have a look at this but I get the feeling it could be difficult. We will see what we can do. Thanks for your support. Which home brew store do you normally purchase from in Germany?

[@dallasfraser9026]

kzbin.info/www/bejne/h5zCpnytZpuBoZo I don't think FC on the tap is worth it. The FC QD looks good but I haven't tried it. One real cheap solution is inserting into any tubing. Not sure why this guy stopped selling the inserts but I have one and works well.

[@piesluva1990]

I bought one of these taps to go with your 5L mini keg system (along with the POK duotight 8mm x Flow Control Ball Lock Disconnect and other Nukatap Mini fittings). I seem to have assembled it as per your video but (trialing it with water) every time I connect the gas it is spurting liquid out of the underside of the tap? At a loss as to what I've done wrong? Perhaps I can bring the whole assembly into the warehouse next time I come in for supplies, and one of the guys can check and advise?

[@luizfilipe]

Loved the clamp, it's a really great idea, unfortunately, I couldn't find on website :/

[@Zyrixon]

The shank kit is absolutely genius! Any plans for anything similar for the regular nukataps, og a regular sized nukatap with similar teeth? Would love something like this for drilling beerlines through the wall of the house, as only having to drill 8mm holes would be much less intrusive, than a hole for a 5/8" shank!

[@KegLand]

Yes this is absolutely something that we are doing as we agree that current shanks are really poorly designed and not efficient.

[@NoMusiciansInMusicAnymore]

I have not been so impressed with a video that uses the word 'orifice' so many times. Seriously though guys, not all hero's wear capes but these innovations are truly awesome

[@KegLand]

Thanks for that. I will try to use the word orifice more often in future. Really appreciate the positive words!

[@NoMusiciansInMusicAnymore]

@@KegLand haha, no worries, thanks for the vids though, they really are worth a watch

[@johnmcmullan9741]

Nice looking sampling tap, in my mind. Especially with a 1/4" (6.35mm) shank. Any plans for this? Are they stainless?

[@KegLand]

This tap has the body made from various different composites including PP, polykeytone and EPDM. The spout is stainless and we also use a stainless insert for themale spout. The seals are overmoulded into the body of the tap. This shape of tap body is extremly difficult to make in plastic as we have horizontal channels to make the flow of liquid more laminar and that would be virtually impossible to machine from stainless. The knurled nut at the back and also the tap handle thread and shuttle are all stainless.

[@anthonylamanna8688]

Can you make a video for the soda bottle portable co2 you made with parts and pieces????

[@bulldog9708]

Interesting to see how difficult it was to push in the tube to the disconnect. I have heaps of trouble with the push in fittings, both liquid and gas with the Eva barrier. Don’t seem to push in all the way to the indicator, even though I take care cutting the Eva tube evenly etc.

[@neighborino]

I'm finding that too, particularly with the new flow control disconnect. It looks like the o-ring inside might be larger than the older variants. One tip for you, wipe a bit of silicone grease around the end of the tube before inserting it. It was still difficult but it eventually did seat fully.

[@KegLand]

When we first made the whole range of duotight fittings we have made them to be quite a tight fit on purpose. With that said we have a new generation 2 model for all of the fittings that we are about to start transissioning to soon. These fittings are easier to put together and take apart. If you have trouble getting the beer line in all the way we have some customers use a pencil shapener to put a small chamfer on the edge of the beer line and this does make it quite a bit easier.

[@AM2PMReviews]

Is there a way to use the NukaTap Mini to replace the old tap on the top of my kegerator? Or do I need the full size NukaTap?

[@KegLand]

Depends. The Mini has it's own shank though that is not campatible with a full size Nukatap shank

[@jimkat2]

Thanks Kee- with that inline regulator setup on the soda bottle, if i wanted to serve 3 or 4 small kegs, could I split off from 1 regulator or should I set up a separate one for each?

[@KegLand]

One regulator to go to 3-4 small kegs would be fine.

[@Luzuuu]

Nice! When will those items be available to buy in your Aliexpress store? The tap is great and I am particularly interested in the clamp on adapter!

[@KegLand]

We are just strugging to keep up with demand at the moment but once we build up enough stock we will allow the office in China to sell them on Aliexpress. Where possible it's best to sypport your local Kegland distributor but the aliexpress store is good for countries where we do not yet have a distributor available. I think they will be on the aliexpress store in about December

[@Luzuuu]

@@KegLand Thanks for your answer. I‘d love to have a distributor here in Germany, but unfortunately we don‘t have one yet. Also, the other European distributors usually don’t stock everything, sometimes not much. Would be great to have a reliable stock somewhere in Europe. Until then I have to rely on the Aliexpress store…

[@Peter-Southern-Victoria-Aust]

You mentioned if there is something we think you could make before to comment below. Is there any chance kegland can make a portable fermentation chamber for summer made out of a tough polystyrene insulation foam where we can put the fermzilla inside with a peltier cooler attached instead of having to buy expensive fermentation fridges for those on a budget? I have seen one similar on an overseas website, not sure if there is a patent on it or not but it's basically a esky with a peltier cooler which blows cold air inside to cool the fermenter.

[@KegLand]

To be frank. We have an issue with Peltier coolers. They are very electrically inefficient. The small upfront saving in cost results in long term energy consumption. We are looking to make a smaller and more cost effective Rapt half size chamber. Would this suit your application?

[@nicolasgoulet4758]

Just can’t wait for a 1/2 size fermentation chamber!

[@Peter-Southern-Victoria-Aust]

@@KegLand yes it would actually be better, I only want to keep it at 18C for fermentation, I was thinking of upgrading my Kegland 3 keg kegerator and buying the one which holds 4 kegs and using the old one as a fermentation chamber, I have the money but not the space though

[@TheAndlix]

The next big thing would be a digital pressure gauge with wifi and a sounding valve with a small motor.

[@KegLand]

This is something that is on the horizon. I agree this would be really handy.

[@christiann.7195]

the wall mount solution si fantastic. i also hate the shanks a lot. are you going to release the solution for full size nukatap as well? can't wait for it

[@CascadesHomebrew]

I agree. Looking at this design it makes me wonder why having a massive metal shank is the standard and why nobody else came up with an alternate design.

[@KegLand]

That is a good point. I think it's time we re-designed the full size tap shanks and do something similar.

[@oscadelta]

Hey Kee did you end up making the bracket?

[@KegLand]

www.kegland.com.au/products/nukatap-mini-vertical-clamp-on-assembly?_pos=9&_sid=802a9be56&_ss=r

[@Stenumgard]

Please make your version of PLAATO Keg that can work with RAPT in some way. It would be awesome!

[@KegLand]

Yes we have our own version of a keg monitor in development. We hope to release this soon.

[@nigelbrown1949]

Will the Nukatap Counter Pressure Bottle Filler fit the Nukatap mini?

[@KegLand]

Nope, sorry

[@user-mn2ov1bm4r]

How about version of Nukatap mini clamp to attach to table top/ kitchen island unit I.e. a horizontal surface.

[@KegLand]

Yes that is a good point. We should probably make another version to do that too. I will look into that now.

[@KHuynhie]

Is the Nukatap mini compatible with your counter pressure filler?

[@KegLand]

Not directly sorry

[@SeanehKelleh]

Hey guys, can you use the Mini with the nukatap counter pressure filler?

[@KegLand]

Not readily, sorry - different tap threads

[@victorespinosa8859]

The handle can be change? i find it really small and maybe uncomfortable

[@KegLand]

Yes we will have other handles available in future. I should say the handle is also a standard M5 thread so you can easily screw other stuff on too. We have tried to keep all the threads as common as possible.

[@fifis101]

Are you planning on bringing out a full sized version?

[@KegLand]

We do already have the standard Nukatap models such as the Nukatap SS and Nukatap FC

[@ahaggerty9667]

What is mounting the sodastream bottle onto the esky cooler? Do you sell that little mount?

[@KegLand]

That was just something we made in the office. It's a good point, we should probably make these available to eveyone too. I will take that back to the other guys and see if we can manufacture them for customers too.

[@jogo4587]

Is there a stout/nitro spout for this Nukatap Mini ?

[@KegLand]

Yes we have these in the pipeline already. They will be on our website soon.

[@robertchatfield5695]

Do you know if this product is going to be available in the UK?

[@KegLand]

Yes it will definitely be available in the UK soon. Please check with the local distributors and ask them the arrival date: www.kegland.com.au/distributor

[@majedalshasha6381]

hi Kegland I hope you guys improve the bottle filling gun.. every time I use it I create a big mess ! I used to to fill 100s of bottles over the years.. I feel it needs a bit of improvement

[@KegLand]

Have you considered something like this: www.kegland.com.au/products/cannular-can-and-bottle-filler-rapt I think this is a much better option than our standard bottle filler.

[@majedalshasha6381]

@@KegLand interesting option. is it possible if you make video demo on how to use it for bottles (not cans) ?

[@theslyrylan]

Do you have plans to make a stout nozzle for the mini?

[@KegLand]

Not at present, but don't rule it out

[@ryknowo9]

can this replace the garbage tap on a ukeg???

[@KegLand]

We would be happy to talk to ukeg about this. I will try and contact them now and see if they would be interested.

[@mossyrock123]

design a better floating dip tube filter that will stay in the under the liquid?

[@KegLand]

If you want the tip tube to sink a little deeper one easy way is to use an additional stainless ring between the float and the mesh: www.kegland.com.au/products/fermzilla-ss-ball-float-100cm-silicone-dip-tube-and-filter-kit

[@MysteryFishBrewery]

Help please - where the heck do I put the spring that came with my tap and the other parts? No videos seem to mention a spring! Is it top secret?

[@KegLand]

Check the photo on the product page: www.kegland.com.au/products/nukatap-mini-spring?_pos=11&_sid=b3dcc3300&_ss=r

[@VyseNice]

That adapter is excactly what I want for my beer fridge. I don't want to put holes in it in case I want to resell it, but it's such a hassle to open the door and have it beep angrilly at me for keeping the door open as I pour myself a pint. The oxebar kegs are super awesome btw. I'm just waiting to get my mitts on the smaller ones in norway soon.

[@KegLand]

Thanks for the support. We are trying to make more 4L kegs as quickly as possible so hopefully we can get them into Norway soon.

[@VyseNice]

@@KegLand That's cool. I'm always excited to try new stuff from you guys, so I'm looking forward to it. I LOVE the CIP! Btw, could a "full sized" Oxebar 19/20L keg work? Would it even be practical at that size?

[@thebeersandthebees]

Id love some sort of better designed drip tray for the front of a keggerator. Some of the generic ones avaliable are pretty nasty and cleaning them out is a pain unless you rig some sort of custom drainage system into it.

[@KegLand]

Do you mean the drip tray that sits onop of the kegerator or attaches to the front of the kegerator/keezer?

[@thebeersandthebees]

@@KegLandThe front attaching one. For a stardard fridge with taps hanging off the front of the door.

[@user-gb3oi1bo8m]

What are the dimensions of the Nukatap Mini clamp. I have a Freezer above the fridge door and the best position for the clamp is between the 2 doors. As far as I can see my gap is about 8mm maximum. I wouldn't like the back of the clamp keeping one door ajar.

[@KegLand]

We are just tweaking these dimensions a bit now. They are just about to go into production so you should see the dimensions on the website in about 1-2 weeks.

[@shm613]

When should the US market expect to start seeing these items, specifically the Nukatap Mini and the Wall Mounted Shank?

[@KegLand]

KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com It's best to contact these guys directly and they can give you lead times and approximate arrival dates.

[@louiej77]

Will you update the Kegland jockey box with these mini taps?

[@KegLand]

We're looking at various options

[@okgraven]

When wil this be available i europe, Like Norway ??? Also the smaler Oxebar Keg ???

[@KegLand]

The smaller Oxebar 4L kegs should be available in Norway before the end of the year. The taps might get to Norway a little sooner.

[@NoDiarrhea007]

I wish I had a lot shank 😜

[@KegLand]

Me too!

[@grahamhawes7089]

At last! When will this be available via MoreBeer and other US partners?

[@KegLand]

KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com It's best to contact these guys directly and they can give you lead times and approximate arrival dates.

[@jakejones4432]

Will the FC Ball Lock Disconnect and Nukatap Mini combination fit on your Mini-Keg Ball Lock Lid? I know the FC Ball Lock Disconnect is a little larger than standard disconnects.

[@KegLand]

Yes they will fit onto the mini keg ball lock lid.

[@jakejones4432]

@@KegLand That's awesome.... now when can we get them in the US?

[@LloydGM]

Would LOVE to buy several of these, but they're completely unavailable in the USA. How do we go about buying them? And please don't say "arrange international shipping" because the minimum cost for that is $150. 😮

[@KegLand]

KegLand has two main distributors in America. www.morebeer.com and www.williamsbrwing.com It's best to contact these guys directly and they can give you lead times and approximate arrival dates.

[@yay0t]

How many liters of beer can you serve out of that co2 soda bottle?

[@KegLand]

Depends on pressures and temperatures.

[@jasonjohnson7817]

When will this be launched in the UK? Its not on the brewkegtap site yet.

[@KegLand]

It's best to ask BrewKegTap. They will have a better idea when the goods arrive as they organise the freight from our consolidation DC.

[@jasonjohnson7817]

Thanks. Guys. Want 2 of them for my keezer for symmetry with my SS centre tap. I'm autistic, have a brain injury and blind and they've been a good help yo this brewer.

[@KcCommie]

Glass Grolwer version of the PCO38 Ball Lock Disconnect Tapping Head Kit

[@KegLand]

Yes I think that should be possible. Which design of glass growler do you mean?

[@KcCommie]

@@KegLand gallon and 1/2 gallon growlers with the screw-on cap, looks like KL14403. Got quite a few from breweries over the years. The other option I've found, CanKeg Growl Tap Kit is close, but would really prefer some ball lock connections without needing a mess of adapters.

[@PetraKann]

According to my Reynolds Number calculation beer being poured through a 10mm orifice, at a rate of 1 pot per 15 seconds would be in the turbulent flow region (at least in transitional flow). And this calculation assumes a straight pipe with no bends. A tap is closer to an elbow than a straight pipe so the flow would unlikely be laminar. Certainly not fully developed flow. I would be very surprised if the flow was laminar in these irregular tap cross sections with the flow rate of 1 pot per 15sec. The beer also contains bubbles of various sizes - another complication

[@KegLand]

You are absolutely correct. If you definte "laminar flow" using the Reynolds number definition then we would have to make a much longer and bulkier tap spout. With that said when we talk about laminar flow we compare our results with other competitors in the marketplace and our taps have significantly more laminar flow than the competition.

[@DanielInston]

Noticed a few others asking some unanswered similar questions. If I have a 1.25l PET bottle with 90psi of CO2 in it, how many grams of CO2 would that be? How would it compare to the little 16gram disposable CO2 cylinders that you sell? Would it be possible to design and sell a decently rated 500ml extra strong pet bottle that would hold a decent (and refillable) amount of CO2 for this same purpose? Maybe there is some amount of inherent danger to this, but perhaps it could be mitigated with well designed fittings?

[@KegLand]

Nope

[@twiztedplayer5358]

Less mini taps and more 65l copper domes.. jokes😂 love the setup. But seriously, where is the 65l copper dome.

[@KegLand]

Haha. Dont worry we have some really cool distillation hardware on the horizon. Do you think the copper dome is necessary. I have always preferred the stainless lid myself and the dome shape is more of a cosmetic thing rather than performance. Did you want the copper dome for cosmetic reasons or to improve the spirit somehow?

[@twiztedplayer5358]

@KegLand I have always been told more copper contact will result in a better end product. As you also mention on the description of the alcoengine pot still When your hot spirit comes in contact with copper the copper acts like a catalytic converter and drives sulfur out of the spirit. This process means you get less "off-flavours" and you simply get better quality spirit. But yes, I also do get hard for copper porn. Bit of a shame I have to buy from another supplier for a brewzilla accessory.

[@allfatherodin-officiallyun1107]

Is the nukatap mini compatible with the nukatap counter pressure filler?

[@KegLand]

Yes you can use it with that. Just remember the thread is the MFL 1/4. So any of these fittings can screw on then you can attach the counter pressure filler.