Machining a Bronze Cross Slide Nut for a LeBlond Lathe From a Casting

  Рет қаралды 49,679

Keith Rucker - VintageMachinery.org

Keith Rucker - VintageMachinery.org

Күн бұрын

Пікірлер: 111
Machining Tapered Threads for a Steam Locomotive Try-Cock Repair
33:25
Machining Tapered Threads for a Steam Locomotive Try-Cock Repair
Keith Rucker - VintageMachinery.org
Рет қаралды 126 М.
Machining an Extended Reach Shell Mill Holder for the Steam Stoker Engine
39:42
Machining an Extended Reach Shell Mill Holder for the Steam Stoker Engine
Keith Rucker - VintageMachinery.org
Рет қаралды 75 М.
Жездуха 41-серия
36:26
Жездуха 41-серия
Million Show
Рет қаралды 5 МЛН
Challenge CR7 people try the impossible-to-do Cristiano challenge 2m68😱😳⚽️
1:01
Challenge CR7 people try the impossible-to-do Cristiano challenge 2m68😱😳⚽️
dimerci tv
Рет қаралды 134 МЛН
Непосредственно Каха: сумка
0:53
Непосредственно Каха: сумка
К-Media
Рет қаралды 12 МЛН
Counter-Strike 2 - Новый кс. Cтарый я
13:10
Counter-Strike 2 - Новый кс. Cтарый я
Marmok
Рет қаралды 2,8 МЛН
Single Point Threading an Internal Left Hand 5 Pitch Acme Thread for a LeBlond Lathe Nut
22:15
Single Point Threading an Internal Left Hand 5 Pitch Acme Thread for a LeBlond Lathe Nut
Keith Rucker - VintageMachinery.org
Рет қаралды 42 М.
Horizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank Handle
39:01
Horizontal Boring Mill Restoration: Milling an End Spline to Repair the Crank Handle
Keith Rucker - VintageMachinery.org
Рет қаралды 65 М.
Monarch 612 Lathe Restoration: The Tailstock Dilemma - Making One Good One from Two....
27:42
Monarch 612 Lathe Restoration: The Tailstock Dilemma - Making One Good One from Two....
Keith Rucker - VintageMachinery.org
Рет қаралды 58 М.
Horizontal Boring Mill Restoration: Fabricating a Drive Dog Plate for the Spindle
25:23
Horizontal Boring Mill Restoration: Fabricating a Drive Dog Plate for the Spindle
Keith Rucker - VintageMachinery.org
Рет қаралды 50 М.
Monarch 612 Lathe Restoration: Machining a New Lever Handle Bushing with a Square Broached Hole
27:01
Monarch 612 Lathe Restoration: Machining a New Lever Handle Bushing with a Square Broached Hole
Keith Rucker - VintageMachinery.org
Рет қаралды 58 М.
Sugar Cane Mill Restoration: Welding up and Turning the Shafts on the Large Rollers
21:34
Sugar Cane Mill Restoration: Welding up and Turning the Shafts on the Large Rollers
Keith Rucker - VintageMachinery.org
Рет қаралды 51 М.
Monarch 612 Lathe Restoration: Adapting a Rack and Pinion Crank to Move the Tailstock
36:53
Monarch 612 Lathe Restoration: Adapting a Rack and Pinion Crank to Move the Tailstock
Keith Rucker - VintageMachinery.org
Рет қаралды 60 М.
1917 Vulcan Steam Locomotive: Removing a Damaged Steam Chest for Repair
20:55
1917 Vulcan Steam Locomotive: Removing a Damaged Steam Chest for Repair
Keith Rucker - VintageMachinery.org
Рет қаралды 48 М.
Monarch Machine Tool Company - THE TURNING POINT - 1950s Promotional 16mm Film
32:31
Monarch Machine Tool Company - THE TURNING POINT - 1950s Promotional 16mm Film
peahix
Рет қаралды 166 М.
How a Steam Locomotive Works (Union Pacific "Big Boy")
36:24
How a Steam Locomotive Works (Union Pacific "Big Boy")
Animagraffs
Рет қаралды 5 МЛН
Жездуха 41-серия
36:26
Жездуха 41-серия
Million Show
Рет қаралды 5 МЛН