Kemei 2296 Review

[@ericsuper9723]

The issues you mentioned are easily fixed. It took me 5 minutes to remove the clicking part and made it smooth adjustable clipper. Now other people complained about your can not zero gapped this clipper well I just did it took me 1 minute very simple....

[@tolikegal8315]

how? i need a tutorial

[@Edelhard99]

Yes how do you did it

[@matthughes2446]

​@@Edelhard99 you take the screw out the lever, inside the actual lever is a silver/grey plastic piece that has a screw - simply take it out and put it in the opposite way its sitting and put it back together

[@matthughes2446]

@@tolikegal8315 you take the screw out the lever, inside the actual lever is a silver/grey plastic piece that has a screw - simply take it out and put it in the opposite way its sitting and put it back together

[@fredgonzalez6619]

Dude, you’re so humble. I can tell you’re a great person. Thanks for another cool vid, and also thanks for the hack tip. I’m getting one now!! haha

[@thewoodshedbarber]

Wow bro! That’s that nicest thing someone can hear. I great appreciate it man! 🤜🏼💥🤛🏼

[@cubicle5788]

Really good that you explained the selling of molds

[@thewoodshedbarber]

So many things I’m still learning bro!

[@anumbus]

I noticed that you compared the Kemei to the TPOB, but it's closer to being comparable to the Supreme Vader. They are basically the exact same form factor of each other.

[@thewoodshedbarber]

💯 percent same as Vader, I agree , I compared to disprove the people saying they’re the same

[@nhiathor8155]

I got it on a special Christmas deal and it was somewhere around 18 with the discount. Yes, out of the box, the lever is trash and the blade slide at an angle which causes uneven blends. I tried the reverse black piece method and it was slightly better but not good. I tried to replace every style of lever and finally found a solution. I swapped the floating lever from an older model TPOB reaper. It can be zero gapped but the biggest improvement was that it opens as much like a master or fast feed. The slant blade gone. Did a little research and the lever TPOB reaper was from a standard plastic Wahl lever. Not the metal looking 1919. It is now my official go to.

[@thewoodshedbarber]

I love fellow clipper tinkerers

[@nhiathor8155]

@@thewoodshedbarber I tend to follow Edounboxing but sometimes I like to do my own thing. Subscribed.

[@josuefermin8824]

Do you recommend this Kemei 2296 Clipper or the VGR 003?

[@crayonjambe7515]

At 4:32 when you bring up the other clippers with the nice clicks, what is the name of those clippers?

[@crayonjambe7515]

Nvm i think it's the tpob xo

[@thewoodshedbarber]

Yep that’s it

[@crayonjambe7515]

Thanks for the reply man. Also can you please tell me what guards does the 2296 come with? Can't find the info anywhere. Just wondering if it has the 0.5 and 1.5 guards ​@@thewoodshedbarber

[@lamprosvlx8596]

​@@crayonjambe7515 it doesn't come with a 0.5 and a 1.5 I don't know what guards fit it😕

[@sohailazam8288]

Honestly this clipper is becoming ine ofnmy favorites and i have many clippers, including some from tpob. All i did was change the taper blade to a tpob faper blade and made it a floating lever, its essentially y an x clipper but with a plastic casing, that doesn't really bother men, well worth it👍

[@thewoodshedbarber]

It’s got good bones, we just have to tinker to get the best out of it

[@joeskichavez395]

Hey Matt, thanks for the review. I got mine about six months ago. I paid around $22 total. I adjusted the lever to floating and swamped out the cutting blade. The power is good and I use it on kids. Awesome tool.

[@thewoodshedbarber]

Good stuff!

[@so-what5991]

Hey guys I just ordered mine. I’m just wondering does this clipper take Wahl premium guards

[@mosettyson]

what blade setup did you use ?

[@joeskichavez395]

I swapped the cutting blade to the JRL

[@crayonjambe7515]

In regards to the blade, are they by any chance the same size as the wahl blades? Just wondering if I would be able to switch wahl blades onto it. Thanks

[@thewoodshedbarber]

Not the moving blade but the still blade yes

[@crayonjambe7515]

@@thewoodshedbarber ah interesting. thanks

[@jt2475]

Fyi u can get a madeshow m10 lever and put it on the kemei to get all the clicks.

[@dorohnmosley3699]

Please review Kemei 1856 and 2293!

[@notkeet]

gotta cop this before my barber school starts

[@notkeet]

great review btw

[@averagebuttersakura5522]

Is it easy to remove the gear?

[@thewoodshedbarber]

Very, it’s just a washer on the taper arm screw

[@crayonjambe7515]

Hey man, what do you think of the kemei 1071?

[@thewoodshedbarber]

Not tried it yet

[@forlatagate1]

Wahl color pro or kemei 2296 and 2299 set for the same price as the wahl color pro, good or bad deal

[@thewoodshedbarber]

I would go kemei set. You can do more especially if you are just starting out

[@forlatagate1]

@@thewoodshedbarber I'm going to do exactly that, thank you,

[@forlatagate1]

@@thewoodshedbarber thanks again, got the set, cheap 🎉, very impressed with them🎊🍾😁

[@epilator3506]

Do you recommend it for Beard use at home? Im looking for a good beard clipper + trimmer, and everything comercial ive ever had was not good for long time use, like philips etc.... And i think only for 2 times a week at home i dont need to get a tbop or sc if can save a bit money ^^ Nice video, thx 👍

[@thewoodshedbarber]

I would say that’s a great pick! Either this or the vgr

[@aaroncline5828]

So you do think the trimmer is worth the buy!?

[@valetudo025]

Watch his other trimmer video. The trimmer is legit.

[@thewoodshedbarber]

Trimmer? Absolutely

[@aaroncline5828]

@@valetudo025 I saw it before just checking twice LOL

[@kemistrypops]

How would you rate the clipper after you did the modification of the lever?

[@thewoodshedbarber]

For barber usage before it was like a 2 or 3 after I’d say a 6 or 7 which is pretty good for the price.

[@402outdoorzx5]

You do know all of tpob is drop shipped with a logo on it too right? Lol

[@TinoXStudio]

Very good review I appreciate the detail

[@thewoodshedbarber]

Thanks for watching!

[@lukslays]

should i get it as my first clipper?

[@thewoodshedbarber]

I would go TPOB troll for a first clipper. It’s cheap but quality is high. If you are wanting to really get into barbering.

[@Rongoalz]

@@thewoodshedbarberhow much does tpob cost then?

[@thewoodshedbarber]

@@Rongoalz the troll can be found from $65-$100 depending

[@Rongoalz]

@@thewoodshedbarber alright 👍🏼. But if I want to fade with kemei 2296, there’s no half guard or 1,5 guard. Is it still possible to fade? How should I do?

[@LS-pv4dh]

​@Rongoalz replace that guard set bro. I only use 2 guard sets. My classic andis purple 2 mag or gamma plus tight 2 mag. Depending on clipper type those 2 cover everything nicely.

[@marcinw8906]

Blade is taper ?

[@nemamiya3]

The weight of the product is not listed properly. Can I know the weight? If you also do a review of vgr003, it would be nice if you could tell me the weight then too.

[@thewoodshedbarber]

Sorry, I don’t weigh in my reviews as of yet

[@RealistJ]

Whats the mm of the lever fully extended?

[@thewoodshedbarber]

It has a fusion style blade so all the way open is probably around 2.7mm

[@RealistJ]

​@@thewoodshedbarberkemei say its 4mm open.. That cant be right?

[@thewoodshedbarber]

Maybe extending outwards but that’s not how the adjustment works. You just gave me a good video idea

[@RealistJ]

​@@thewoodshedbarberthat'd be good

[@SocialExplore]

What's the best rezor can you recommend bro

[@thewoodshedbarber]

My favorite razor is the Martin Extra long from MD Barber.

[@jaydenaguilar8272]

can you fix the clicks ??

[@thewoodshedbarber]

You have to take the taper arm off and remove a notched washer to do it

[@Wolfiegangs]

I'm so sad about the lever. The floating lever wouldn't help me cause I'm new. If only we were able to contact them and have them change it. I wanted this as my first clipper so bad. Does anyone else know a clipper this good that is under the radar? Preferably a AliExpress one.

[@thewoodshedbarber]

The VGR 003 is perfect for a beginner. And it’s pretty cheap

[@RellyMedia]

2299 or 1986?

[@thewoodshedbarber]

I’ve not used the 1986 yet.

[@Adriel-gm8wl]

Can you zero gap

[@thewoodshedbarber]

Absolutely

[@elbanayadtv883]

Mod the lever and that's it...me I removed my click lever so far I have no problem with it

[@rolicutshair]

how do you mod it?

[@friendlyfire4178]

I think there is a mixup with a couple of numbers here. The actual charging time is 3,5 hours. The runtime is 350 minutes. Thats pretty decent in my book 😊

[@thewoodshedbarber]

350 minutes is almost 6 hours there is no way it’s battery is that good. They have contradicted printing on the box

[@kemistrypops]

Thanks for this review. i changed my blades to the walh magic clip blades. The blade adjuster is the reason why my fading is so hard. I will have to try to modify it to a floating lever

[@thewoodshedbarber]

I considered it trash before I did that

[@goransvensson5547]

Love this chanell👊

[@thewoodshedbarber]

Thanks man! I really appreciate that

[@goransvensson5547]

@@thewoodshedbarber I have a question for you who are professionals, I have a babyliss skeleton that gets hot in the blade already after 30 sec. after 1-2 minutes it is very hot. it hurts to shave with it because it starts to sting the cheeks. is it normal for it to heat up so quickly? I have opened and cleaned and oiled a lot but the problem does not go away.

[@thewoodshedbarber]

Might just be a bad blade. That is odd though especially for Babyliss. How old is the blade?

[@goransvensson5547]

@@thewoodshedbarber it is about 2 years old the blade and the whole machine. but I have only used it 2 times a week to shave my beard.

[@neko_the_barber9000]

Dope review 💪🏾

[@thewoodshedbarber]

Thanks brother

[@DUICE08]

Great review and I'm sure the manufacturing company likes you gave it another chance. It's a pass for me though

[@thewoodshedbarber]

Same, it’s not good enough for my station but it’s good enough for a beginner

[@biggerbiggerbigger]

You a good person

[@thewoodshedbarber]

That’s very nice to say, thank you!

[@MrFuture804]

The Kemei was out first

[@thewoodshedbarber]

Versus the what? The Vader? Or the XO

[@marekzeman8417]

The best Clipper what i Have really long baterry life, change Blade And Its really fire!! A also Have Senior And kiepe power Up but kemei still better

[@thewoodshedbarber]

Very glad it’s working out for you!

[@marfigue777]

bro the vgr 003 is goat and its just 30 bucks

[@thewoodshedbarber]

I just got it to review

[@Larrycaboa-ue9pn]

😂