I built myself a 2 engine boat recovered from the junkyard

I built myself a 2 engine boat recovered from the junkyard

[@panhsam1132]

Bạn là thợ kỹ sư đa năng bậc tài, có vẻ mọi việc rất dễ dàng đối với bạn, chỉ 1 công việc nhỏ rất,khó đối với mọi người. Xem số bình luận của mọi người các nước, đủ biết kỹ năng tay nghề đa dạng mà bạn có đươc. Thực sự rất thích xem việc làm của bạn. Chúc sức khỏe nha

[@Yundra344]

nice to meet you, good luck my friend🤝🏻🇮🇩👍

[@dennis-tde]

Ты самый лучший механик. Ты просто молодец и гений 👍👍👍

[@patrickmorrissey2271]

End of part 1??? Ohhh, you're killing me! Very intriguing. So you did not like the other motor?? Did the other motor run too deep, you'd rather run in shallower water???? The boat seemed to run really good on the Isuzu 4 cylinder... I'm trying to understand the total re-powering & re-thinking of the powerplant & design.... Those look like pretty big Jet-Ski motors... Should have plenty of power. Heh heh! Nice. I love what you do, but sometimes you confuse me a little bit... You clearly KNOW what you are doing, you are smart.... But, no torque wrench?? Ever?? Some of that stuff, you should definitely be using a torque wrench. Those reed valves, some of them were damaged.... and you just re-used them?? You're doing SO MUCH WORK, it would really be a shame if it ran kinda crappy because you didn't replace the reed valves when you were literally holding them in your hand, it would have taken zero effort.... I was also curious, you took the engine block to a machine shop to re-bore & re-hone??? Or you did that yourself, off camera???? Or, that was sleeved?? I'm just curious, you went from some pretty rough-looking cylinder walls, to some really sweet smooth bores..... Those engines were pretty rough. If you get those running good, that in itself would be a very good accomplishment. I tip my cap to you Sir. You have talent, and you are not afraid of work.... and you don't exactly have a clean air conditioned shop either, you're working in tough conditions.... Uhhh, also, I love your boat lift. Very clever!!! Heh heh heh!!! Well done. Anyways good luck, I look forward to more videos.

[@MrSaddie123]

Every time I feel burned out or loosing my passion I just watch this guy for hrs and I'm good to go. TFS friend once again amazing!

[@jonathanwhite9051]

I have zero reason to ever complain about my tools or my small shop! This guy is simply amazing!

[@werner1991]

I love the fact that he's recycling most of the parts. Absolute fantastic craftsmanship! 💪 Throwing the waste into the river is not the best way to get rid of it though...

[@zztuber]

yeah, i noticed the same thing.. but still a mastermind for sure

[@matthiasweigel311]

Like your constant plastic trash is any better...

[@matthiasweigel311]

How dare he throw WOOD into the river?!? Horrible!!!

[@jimbayler4277]

@@matthiasweigel311 He also threw the hacked out fiberglass and foam into the waterway. You see it floating there by the reeds later in the video. If he does it so casually, he has done it before. If I was his downstream neighbor, I wouldn't want his garbage floating downstream to my docks or fishing holes. I kind of like the thought of my kids and grandkids being able to jump off the docks safely. Also, I'd be a little bent out of shape if that piece of piling he dumped in the river, punched a hole in my fastboat !!

[@ionracer24]

That really bothered me too

[@chuctran2255]

Mấy năm trước chủ tướng là cháu chỉ thích sửa chữa này nọ thôi, không ngờ cháu lại giỏi như vầy. Chúc cháu mãi mãi thành công với những videos tới nhé. Nếu đi sâu vào chi tiết được thì hấp dẫn hơn.

[@user-ug2rf5wy5t]

Tôi không hiểu gì về động cơ, xe hơi. Đối với tôi, đó là một thế giới tưởng tượng. Nhưng, tôi đã xem hai đoạn phim cuối như một bộ phim phiêu lưu, không thể nào xé mình ra được, tôi vô cùng kính trọng những con người có bàn tay vàng và cái đầu sáng tạo. Với lòng biết ơn và kính trọng, ông Hồ. Andrew. Nga.

[@baococ]

*HAY QUÁ ĐI ANH HỒ ƠI EM HÓNG VIDEO CỦA ANH TỪ RẤT LÂU RỒI ĐÓ....👈MÌNH CẦN SỰ GIÚP...ĐỠ TỪ CÁC BẠN RẤT NHIỀU Ạ🙏🙏🙏❤🇻🇳📌*

[@ippahc]

Hello from Germany, keep it up, cool project!

[@igorburynin]

Dude, you did awesome work!!! I can't believe! If I send you my S63b44 from my BMW M5, in the same condition, can you rebuild it?

[@user-db5zl5st1t]

لقد عشت في فيتنام لمدة 5 سنوات ، ولم تتوقف براعة شعبها عن إدهاشي . كان هذا الإنقاذ والاستعادة شيئا يستحق المشاهدة لا أستطيع أن أصدق العمل الذي تم على ذلك المحرك المغطى بالكرنقيل . بالإضافة إلى ذلك ، كانت جودة الفيديو وتحريره رائعة . شكرا لنشر الفيديو ! 🇾🇪🇻🇳

[@luyenvotv]

Em rất tài hoa ,nhưng em quay nhanh quá ,uổng tài nguyên lắm, em siêng nói ,giải thích những khi lắp ráp máy ,hay loại máy nầy có ưu điểm gì ,sức mạnh của động cơ ...hay khi em muốn làm 1 cái gì em phát thảo ra giấy rồi em căn cứ vào đó để thực hành, nói chung là em quay phim rất cực ,cho nên chỉ 20 ' mà qua bao nhiêu công đoạn uổng lắm ....thay vì 2 phần ,em có thể kéo lên 5 phần hay nhiều hơn .Anh biết người làm thì ít khi nói ,như để lấy lại công sức xứng đáng em nên thử nghĩ những điều anh nói ...luôn theo dõi và ủng hộ em 👍

[@thanhlapapple6902]

Làm mà nói không có view nước ngoài a ơi hoặc rất ít

[@amerika83]

Двигатели много эксплуатировали ! Большой ремонт ! Уважение ! Россия 🇷🇺

[@rickbullock4331]

Amazing amount of craftsmanship with the engines rebuilds and the new dock system and the boat work. I can’t wait to see Part 2.👍👍🇨🇦

[@trungsonquach5247]

hay quá giỏi quá Mr Hồ ơi

[@luuquochuy9298]

Thật tuyệt vời...💖 MR HỒ Anh là một nhà khoa học viễn tưởng của VIỆT NAM

[@user-er8wt9qw2h]

тебя смотрят в России! ты лучший! Успехов и удачи тебе, друг!!! России привет!!

[@trunghanhle4081]

Chúc may mắn nước Nga . Việt nam luôn yêu mến nước Nga .

[@genesloan3175]

Great skills for the whole process! Looks like a nice boat with two engines coming in next video!

[@BeamerTheFox]

looking good, i cant wait to hear those twin 3 cylinder diesels fire up !

[@AnhThuNguyen-eq1xq]

bái phục, bạn quá giỏi..... thử thách cho bạn là làm chiếc này thêm 1 chức năng chạy được trên đường bộ luôn xem, biết nó sẽ rất dễ so với tài năng của bạn, tôi đoán vậy, nhưng thêm thử thách mới hứng thú, mới cực đã ......hiiii. vậy mới xứng danh thánh chế, chúc bạn và gia đình nhiều sức khỏe

[@davescheer5038]

He not only builds the new boat but then builds a new dock and ramp to get the boat out of the water , but get a welding face shield or glasses your burning your eyes , great video 👍🏼👍🏼

[@CloudHindlen]

I know how much work you put into these things and I just want to say you are amazing... Please find yourself a Welding Helmet...your Vision is important and you really need to protect your Eyes 👀

[@kenholt8297]

Cloud? Are you a Karen? 😮🤔😂😂

[@adamd5013]

@@kenholt8297 bold comment from “ken” lol

[@LucasBell420]

No, but eye protection is kinda important when you have to use them in daily life

[@CloudHindlen]

@@adamd5013 ken was extremely random in his/her hastily chosen comment. 😂

[@bennieleip579]

A Karen comment in 2022 ? I thought that bs died off 🤣🤷🏼‍♂️

[@kiemthanh2477]

Thật đáng khen phục chế từ máy cũ sang máy mới biết chế Xuống cầu tóc đẹp chạy nhanh

[@Trica70]

Làm tốt lắm em trai nhưng để cho chuyên nghiệp và để bảo vệ đôi bàn tay của mình thì em nên mang găng tay nhằm hạn chế tiếp xúc với dầu nhớt, dung môi... (nhất là những lúc em làm vệ sinh và phục hồi động cơ). Rất thích xem những video của em, cảm ơn em rất nhiều!

[@brandonevans4142]

Excellent work 👍

[@shaunpc2512]

Absolutely incredible job again, super impressed with what you have accomplished with your build and really look forward to seeing part 2. Thank you, take care 🙏🏻

[@dopeytripod]

he shoulda put a few more layers of fiberglass imo

[@tienphan7283]

@@dopeytripod i got same feeling like yours but the thing is: we havent seen the whole process. hope he make it strong enough

[@randylanhart1387]

Amazing man ! He takes scrap items and makes them into very useful machines. You sir are a very smart man...

[@trithinh1033]

Ông Hồ là siêu nhân...làm tất cả mọi việc. Kính nể ông thiệt.

[@johnmount5487]

Can we pitch in to get this man a welding mask? Lol I love him but he’s crazy to weld without one!

[@adhfigaro3680]

Sent him money or stuf😀

[@stalkey1104]

po llm look pp LL

[@stalkey1104]

,.m

[@LieLo416]

Do you realise he just blinks when he flashes a weld? It makes me laugh at the ridiculousness of it. Saw it in his other vids and I've been looking for it in every video since, makes me chuckle. he still does a damn good job with the welds though. in all seriousness I hope nothing happens to his eyes....

[@Gaybraham.Lincoln]

@@LieLo416 like a slant?

[@darkage5]

I hope there will be a part 2 so we can see what it does on the water. But i agree with others. You should have taken it to the garage and modified it. A lot of those plastic and fiberglass shavings could be falling into the river.

[@ionracer24]

Agreed!!!!

[@rz8943]

Thanks for sharing your skill work to the world 👍👍👏👏👏

[@Highlands484]

Quá tuyệt vời cho người Việt Nam chúng ta,, Chúc bạn cuối tuần vui vẻ

[@meanmanofsteel]

That scene when you showed all the individual restored parts was awesome!

[@vanillagarilla965]

Wow I can’t wait to see this thing blasting on the open water , it’s going to be rocket ship. And to think where it started from ,man you are an absolute wizard my friend. Please keep making these type of videos because they inspire me to be better at my craft of being an auto mechanic.👍🏻👍🏻😎

[@parawboracay4078]

Too strong Mr Hö ! Another great video, thank you for sharing this. Respects, talent, skills and great music !

[@Yundra344]

nice to meet you, good luck my friend🤝🏻🇮🇩👍

[@1eltino]

Very impressive. I run a business at a boat yard in England. I would employ you in a heart beat! Great work

[@wattienewton5967]

Ditto great little worker too Real old school reco everything Make whatever is needed

[@Garryck-1]

Except that he clearly has never even heard of 'correct torquing sequence' when rebuilding an engine. But yeah.. once he got that straight, he'd be a definite hire.

[@lesdeliresdadrien]

Beaux travail, félicitations. Bonjour de narbonne, fr.

[@NguyenTran-ki9lp]

Very good ! An excellent job ! Mr Ho thánh che. Thank you for showing us your talents !

[@rusmankadarusman844]

Sy senang nonton menggali ilmu pekerjaan memperbaiki mesin.dn merakit perahu kembali menjadi bagus. 👍👍👍.mantap cainal.walau sy sekolah hanya sebatas SD. 🙏🙏👍👍❤️❤️

[@halfnelson6115]

I didn't even realize it was a 2 smoke till he started cleaning/replacing the reeds. After that the vid got my fully undivided attention. Great job. Well done.

[@MicRuLerZ]

Well 4strokes also don't generally have exhaust outlets cast into the sides of their cylinders

[@voornaam3191]

Remember watercooled 3 cylinder 2 stroke 750cc motorbikes? Bloody fast bikes, compares to a 1000cc fourstroke, maybe. Lots of revs means lots of horsepower. I bet these things are like that. And then two of those, though that does NOT double the actual horsepower, props don't work that way, but you get lots of power anyway.

[@strykerreid7338]

I had to rebuild my jet ski carburetor last week with no knowledge on how to do it and I thought that was difficult. This guy is incredible imagine what he could do with high quality materials and tools.

[@yeahyeahyeahyeah1111]

Brother i love your videos, I would like to make a suggestion for wearing water proof gloves ,when you do the sanding and cleaning of the parts,over time the heavy metals can soak into your body and cause health problems, I wish you a continued healthy life and many Beautiful memories 🙏🏆

[@BobbyTucker]

I am totally mesmerized with your talents, you are the best Craftsman, no, make that Master Craftsman I have encountered. I can't wait for your Part #2 of this 2 engine boat. Thank you for sharing this video.

[@ezmode1]

Qua hay Mr. Ho. A jack of all trades 👏👏

[@michaeldecker2725]

Someone send this guy a welding mask!

[@danhle2474]

Yes please. It will protect his eye.

[@WintonMc]

Thank you Mr Ho. Another great video. We hope the next part will be available soon.

[@cokroo5hozygroo765]

Abang hebat ..👍 from Indonesian 🇲🇨

[@user-zp7of6jj2c]

crazy, fearless, great mechanic!!! The boat before that was also great!!! (сумасшедший, бесстрашный, великий механик!!! Лодка до этого тоже была великолепна!!!)

[@TheWill7777777]

Хорошие свалки, у нас таких не, вообще мастеру прям поклон за его труд

[@thinhvu3574]

A Hồ hàn khéo tay đẹp quá ạ

[@kiemthanh2477]

Thanh chế chế cái gì cũng đẹp đẹp, kiểu dáng

[@user-yg9ts8mu3j]

Вот это мастер! Без всяких лишних соплей взял и сделал!

[@Alex-gp8mw]

И при этом все в одном видио , не то что наши блогеры по году снимают целый сериал .

[@mixailzov2361]

@@Alex-gp8mw правильно лодочка ворованная вот и торопиться 🤣🤣🤣

[@johnhagemeyer8578]

This my friend should run pretty good and fast. Maybe you could waterski behind it too, it might have alot of power on a "hole shot"( starting full throttle from a stoped position). Looking forward to seeing how this works. Thanks 👍

[@Yundra344]

nice to meet you, good luck my friend🤝🏻🇮🇩👍

[@trivule6609]

Đã chế lại thì bạn nên chế thành hai tầng để có chỗ ngủ nghỉ sinh hoạt thì thuận tiện và hoành tráng hơn. Tiếc quá bạn chỉ làm được bình thường. Nếu có chi phí chắc bạn sẽ có được chiếc du thuyền ưng ý hơn nhỉ

[@PashakTv]

Очень классная яхта!!!

[@rshanep5226]

You are a very talented man. Thanks for the entertainment.

[@troubledspirit3328]

I love the first model of this but thought that it was a little under powered for the cool look. Looking forward to how the new jets moves it.

[@4kfamilyfunwalk206]

phố đi bộ....cuộc sống ở Mỹ 🇺🇸 ủng hộ AE Châu phi......! Support from USA Walking Tour! See More Videos Soon!

[@mohammedyakoubi1027]

Bon travail, congratulations, bonne continuation,vidéo très intéressante

[@randallfetty2991]

So much cooler, can't wait to see it finished and running!

[@sleeptime5464]

Everyone: that starter is toast... This guy: hold my beer and pass my toothbrush

[@hobbydadakan]

Skill nya mantap, bisa bongkar sendiri, latar belakang ahli mesin? Good work bro.

[@jameswilliam2072]

the pure talent of this guy.. more power to you and your channel.. keep inspiring us.. love from the philippines

[@strada21_]

And here I am having trouble installaing my lower unit after impeller change no reverse lol 😂,,, great job like always !!! 👌👌👌👍👍

[@ezequielsilva2709]

Muito bom, espero a segunda parte 👏👏

[@Tuananhcongraodep]

Chế đẹp lắm bạn ơi 👍

[@bakhainguyen7757]

Chào Thánh Chế và mấy AE cho A nhiều Like lên gioi qúa Trời luon

[@andersonmarangon3872]

COMO O MR HÔ É SUPER INTELIGENTE, TEM QUE SER CONTRATADO POR ALGUMA EMPRESA PARA QUE ELE POSSA USAR TODO ESSE SEU TALENTO! PARABÉNS MR HÔ

[@teedoubleu2580]

Total abgefahren! Jedes Video ist echter Höhepunkt! Bin gespannt wie das fertige Boot aussieht.

[@theanhtranhuynh8235]

giỏi quá bạn ơi các bạn kỹ sư có giỏi được như bạn không ?

[@reinaldogonzalez94]

The gentleman is an engineer without a Diploma, fantastic job. Waiting here in Kissimmee, Florida USA for the final chapter.

[@LU4EOC]

Te sigo y excelente trabajo, admiro como la fibra de vidrio tiene tanta fuerza como para sujetar dos motores y estructuras, soy mecánico y la verdad tu mundo me encanta, te felicito, ahora no encuentro la segunda parte, un abrazo de Argentina...🤝

[@Plane-tw9xz]

This dude is incredible, I’m impressed with this man’s ability to break down a engine to nothing and rebuild it back up.

[@samueljones4189]

and get it working just like that

[@silentvoiceinthedark5665]

It is not one man but a hole corporate financed production team with a budget for materials and machine tools . Dont let the title fool you, these types of videos are common. I have no problem with it because they are very entertain to watch

[@mrt094]

@@silentvoiceinthedark5665 You think so? Had no idea that was a thing. Is this like a youtube pimp my ride? All just smokes and mirrors to make it seem like one person>

[@leechee5721]

@@mrt094 Yeah its like that , also the videos where villagers build underground houses..etc but still entertaining

[@TrangNguyen-dz7mg]

@@leechee5721 there is no cooporate behind this guy, this guy has couple guys working with him and that 's it. There is no big team or company that finance these.

[@ivanoita4251]

Part 2 when I can't wait to watch Because the repair technique is simple but the results are good

[@tiuspanji4883]

Ditunggu yg ke 2,saya sangat senang lihat hasil karyanya.sangat bagus sekali...saya dari indonesia.

[@jimmytreadway3195]

just imagine what this guy could do with really good tools and materials

[@-EchoesIntoEternity-]

tools are only as good as the craftsman using them

[@jerryp2433]

I work in a billion dollar r&d facility with a bunch of lazy ass union workers.

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@abdulazizalmatrafi4731]

Xin chào bạn của tôi, tôi đến từ Ả Rập Xê Út và tôi rất ấn tượng với những thiết bị tái chế sáng tạo được giới thiệu. Chúc bạn ngày càng tiến bộ và vì đất nước Việt Nam thân yêu 🇸🇦 🇻🇳

[@cantre1479]

Tuyệt vời lắm chàng trai ơi!!♥️💪💪🇻🇳🇻🇳🇻🇳

[@brad30]

NASA should hire this guy 🤯

[@luuktee4152]

Du bist voll das Technik Genie.Einfach komplett zerlegen und alle Teile auf einen Haufen.Bleiben zum schluss noch Teile über???😊

[@gennadynechitailo2991]

Молодчага ! Много работы и мастерства. Результат достойный ! Респект из Санкт-Петербурга !

[@robz5435]

Poor man's creed: Make due with what you got. Excellent work sir.

[@coll8ctor]

I'm proud of my self if I manage to lay some tiles or paint a room but this guy.... WOW!

[@trancehound]

Excellent build! I wish you'd shown how you corrected the play in the piston rods.

[@MrThunderCunt]

Same. That crank seemed to be trashed, or atleast the bearingand rod

[@CountryDave]

Yes, there's no way it's running with that rod bearing.

[@leolego2]

specialized shop just like the inner engine refinish

[@jamesreichardt7573]

WOW ! This guy cuts a gasket , like there is nothing to it , thumbs up 👍 Mr. Ho Thanh Che , a machine could not do any better . Mine never comes out that good .

[@yoshuaafreemanyasrael7791]

Mr Ho, My Guy, great job Always!

[@eliterolo]

Not only building this thing from scratch but he said. “Ahh this dock isn’t working for me, let’s rebuild the dock as well” hahaha. Amazing. Now we got the yacht upgrade it with the sport package

[@FumigadoraNecaex]

Muy bueno, no te olvides de la segunda parte y empieza a usar una mascara para soldar, por tu bien o ahuma unos cristales, por tu seguridad.

[@kawaiipop452]

Mr ho you are engineering wizard how you make everything from a scrap yard ..talk about top recycling.. All that scrap turned into something new.. l struggle to put a hang a picture frame 🖼 on the wall .. Top man WOW 😮 👍🏻🙏🇬🇧

[@pedalshredders1401]

This man definitely gets the “Get To The Point”, aspect of KZbin. Everything I wanted to see and Nothing that I don’t. Another awesome project. GreatJob!

[@Alanardo]

I have no idea how this was recommended to me, but I must say. I am so thankful that it did! Absolutely crazy what you are doing man, I actually can't wait for part 2!

[@mikev33ak]

kzbin.info/door/oJzViBgjt4fBfWRbGcL4kAvideos : : }

[@luismoina3252]

Eres un genio 🙌🏻 vas a llegar muy lejos amigo, da gusto ver tus videos, admiro el trabajo que haces, saludos desde Ecuador 🇪🇨👌🏼

[@kanaky-drift]

Hi huge you really manage respect a big big up to you and has the next big up video 👍 😎 👌 💪 since the France 🇫🇷 and thank you for the subtitles in French

[@lawsonshilingkendall4246]

Watching a master craftsman/artist at work - thoroughly enjoyed...

[@cosmowerkstapes]

nice!🤩 worked gr8 when it was a single-engine boat, looking forward to seeing it in the twin configuration.

[@reaversix2798]

Amazes me how these guys can put this stuff back together. 🙌

[@bozodog428]

You are amazing Mr HỒ !

[@Makita..]

Anh Hồ ơi anh trang bị thêm cái máy bắn cát mini nữa đi sẽ dễ dàng làm sạch hơn rất nhiều