FullI built my own yacht with 2 engines

I built my own yacht with 2 engines

[@Mr_Ho]

Thank you all for watching and commenting ❤️Have a nice day Cảm ơn các bạn các anh chị đã xem và góp ý .. chúc các bạn 1 một ngày vui vẻ❤️

[@joey-gb5md]

No thank you Mr ho for your time and effort.

[@haiduong-zf4gm]

Sao ko thành lập công ty làm Cano bán? Quá đỉnh. 1 nhân tài 👍👍👍

[@tablesandtorches762]

Can I buy you a welding helmet? As a welder myself, it makes my heart hurt to see you working without the proper PPE. And not only that, you'll be able to run a proper bead, instead of the look away and tack method you've been doing. Tôi có thể mua cho bạn một cái mũ bảo hiểm hàn không? Bản thân là một thợ hàn, tôi đau lòng khi thấy bạn làm việc mà không có PPE phù hợp. Và không chỉ vậy, bạn sẽ có thể chạy một chuỗi hạt thích hợp, thay vì phương pháp nhìn xa và tìm kiếm mà bạn đã làm.

[@mohaminemakk6891]

شكرا للعربية

[@mohaminemakk6891]

اول مغربي مر من هنا

[@sovereignentity4924]

I worked for FORMULA BOATS , an American Boat Manufacturer here in the U.S. back when I was barely 18 years old... My Job was to install the Inboard Engines & Stern Drives. So I have a complete knowledge on the whole build process that goes into a Marine Craft... You My Dear Friend , You are a literal Genius..! Your INGENUITY , is one of a kind and rarely seen...🙏 I wish you all the success you most definitely deserve... 🙏 Subscriber For life..! 👍👌

[@mikb277]

SO many youtubers would make this a 3-4 part mini series. You just go for it all in one, respect.

[@jonfife3637]

Suggest watching hull build, part 1

[@pantloaded]

this has 5 parts dawg

[@igorvoronin8952]

У тебя талант, данный Богом! Береги себя! Золотые руки! С любовью из России...)

[@doanhkim2387]

Nước Nga Bạn tốt của Việt Nam, chúc Nước Nga chiến thắng toàn diện mọi kẻ thù , Nước Nga muôn năm vững mạnh

[@quankp3652]

Thợ máy kiêm thợ cơ khí, thiết kế, thi công, quá tài năng, Vn đâu thua gì nước ngoài nhỉ.

[@chuongtranviet3221]

Ng VN IQ khá cao nhé, ko thua Nhật, Hàn đâu. Tiếc ko có đk để phát triển, ko là thành Trung quốc thứ 2 đấy

[@user-jg2vs6eb1m]

Переделка вторая этой яхты супер! Особенно впечатлило, как первый ДВС из грязи перебран был, даже ремень генератора старый остался, но этот вариант с двумя ямахами просто 🔥огонь🔥 Но что хотел от себя добавить, береги глаза при сварке, ты варишь без щитка, ладно в сандалях, но без щитка, это очень опасно для глаз. Ну и в остальном, береги себя! За смекалку, наивысшая оценка! Парень что называется с руками! 👍💪

[@Turon444]

Что за ДВС был использован? Интересно однако

[@user-dw6er4zm3f]

@@Turon444 Насколько я понял, это двухтактные, трёх цилиндровые моторы Ямаха.

[@user-ub4rv7pk8b]

@@Turon444 Yamaha MJ-1200GP GP8

[@user-mk9sl9kj8x]

Привет из России!🤝Парень,ты невероятно упорный и трудолюбивый.Дай бог тебе здоровья и терпения во всех твоих делах!

[@jamsb100]

Hello Sir! Just wanted to say that we love and respect Russian people.

[@yirianto]

You are a great technician: mechanic, electrician, designer, painter, all aspect in engineering... very respect !!

[@duychinguyen7379]

rất đẹp,rất mạnh,chỉ ko hỉu sao Bạn làm mái che ko vượt qa khỏi đầu nhỉ ?

[@nguyenhoa7190]

Quá giỏi! Thán phục thánh Hồ luôn. Những nhân tài này mà có đk phát triển thì đất nước đã được nhờ

[@bradszymanski9910]

This looks like something you bought not something you built. If I didn’t watch it get built before my eyes I would never believe it wasn’t scratch built. Amazing work

[@user-fp4hi4qc6h]

Где хочу там и крашу, а фауна страдает.

[@mucahitaskan95]

Al benden de o kadar

[@RelikvijPoznanij]

*Ты просто шедевр инженерного мышления, такие люди один на миллион!!! Жаль что у меня нет таких друзей.*

[@phoenixrising578]

I have been building cars , motorcycles , boats and trucks since I was 14 I’m 60 now. And I have to say u are amazing. And u work dam hard for what u want U deserve all the wealth and happiness that life can send your way. And I very rarely would say that about anyone these days. Excellent work.

[@walleyehunter8862]

This guy can turn my old car that's been sitting in a field for 2 years into a deep sea submarine 😄

[@bigdadgigachad3042]

No kidding.

[@bigbobfox91]

LOL 😂

[@yeagerxp]

NO! He will turn it it into a Ferrari LOL 🤣🤣🤣

[@boediprasetya2850]

I think so

[@alvaro_builds]

I have no doubts 🤣

[@mv4463]

Some may like the engine design... me I love to watch the boat's body being built... this one is special... Miami Vice movie special... great 👍 👌 job.

[@Frodo_Shaggins]

I wasn't sure how this would turn out from watching part 1 and 2. You turned this build from cool to AMAZING in one video.

[@tranvu2945]

Thật ko " Tin Nổi " chỉ 1 Mình Bạn làm nên Tất Cả... Thế Giới " Khâm Phục " Bạn!!!

[@nguyenthoyoutobe9643]

Mày bị ngáo đá à

[@Hyhy52625]

Kkk

[@wlf1673]

The boats speed and engine sound now match it's awesome looks. I listened to that engine start and acceleration several times, it gives me a smile, though not as big as yours. Bravo! You have made a work of art! Thank you!

[@Kolekvl]

2 stroke sounds good✊

[@nigelw598]

Hi Mr Ho! I am so very impressed with your design and mechanical skill. I hope KZbin makes you a wealthy man! You deserve every penny! All the very best to you Sir! Cheers from Australia 🍻🍻

[@ltcameron1]

Absolutely the best channel on youtube.

[@erwe8009]

he is one of the best handcraftman I 've ever seen. All is done with normal simple tools. Respect to you!

[@lips2356]

Hello Mr HO Thanh Che. I wat to just say that watching you take what something scrape, or found or recovered and turn it into something creative, original , and basically awesome. And you seem to be talented in every aspect of a build. You are a talented mechanic, designer, craftsman and artist. Keep making content it is appreciated !!

[@JWyuh]

grammar

[@nameless502]

Not totally crazy for some of the design details but your knowledge, skill and attention to detail are most impressive. My compliments to you on the build and definitely another entertaining video! 👍🏼

[@nlite10nd1]

CMON GUY YOU GOTTA ADMIT YOUR COMMENT SOUNDS LIKE YOU ARE A BIT JEALOUS

[@vsaripl3555]

Круто😮😮😮😮 вот это аппарат.. 😊Уважение к таким людям!!! Молодец классно переделал из начального варианта.. Прям спортивный катер!) 👍👍👍👍👌🏻👌🏻👌🏻🤝🤝🤝Моё уважение

[@user-wn3of9vk5v]

ПРЕДАТЕЛЬ🥵

[@RealSuburbanCowboy]

Excellent job rebuilding those Yamaha engines. Those are not easy to get the cylinders on. Great stuff.

[@mohammadpanjipratama4541]

SAYA DARI INDONESIA , akhirnya bisa melihat kapal buatan MR ho yang kedua / sudah di upgrade , video ini saya tunggu tunggu hahaha

[@TruongVanSy]

Quá chất luôn, 2 cụm động cơ 6 máy quá mạnh 💪. Siêu phẩm

[@katharina8005]

I follow your videos and love how you implement your crafting skills. I was particularly fascinated by how you got the complicated scrap-tired diesel engine running again!! You have a beautiful yacht now! Please be careful that it does not break!

[@sualemanjiromiza4452]

your language is nice and sweet, easy to read and fun

[@gdxd7956]

Yes, been waiting for this. I am amazed at how easy you made the instruments console dash. Amazing. Great job.

[@honeycreekoutdoors1655]

This is your best build yet! Your mechanical and body work skills are amazing! Can’t wait to see what’s next!

[@wanfadzrilsallamazlansalla9914]

A BIG Thank you for your sharing Mr Ho. From Kuala Lumpur with salute!

[@kevculmstock1]

The engine rebuild alone was excellent. Well done sir.

[@chiefpepdesign]

I just love how you just clean the original parts really well and re-use them. 👌👏👍

[@davr9724]

Crazy how much work went into this project. Good job

[@user-os3vj1cj5j]

Ты лучший из мастеров! Респект от души ❤❤❤!

[@NhanLe-cm8ms]

Ngưỡng mộ a quá đi!! Thuyền này a chế thêm quả mui gập ra vào tự động, thêm mấy khe lấy gió tản nhiệt vào thì hết nấc luôn a...

[@thinhvu3574]

Cảm ơn anh vì những ý tưởng và sản phẩm tuyệt vời a đã chia sẻ. Em có góp ý là anh lên quan tâm tới vấn đề bảo hộ và an toàn lao động hơn như việc sd găng tay, kính bảo hộ, khẩu trang an toàn, phù hợp để có 1 sức khoẻ tốt ạ. Chú em cũng làm nghề liên quan đến máy móc, lúc trẻ làm gì cũng hời hợt giờ sức khoẻ yếu lắm

[@randallfetty2991]

Just impressive that you can take broken stuff and make something new out of it. Nice flaring touches as well.

[@user-gh2en6nh7z]

Молодец пацан!молодец! У нас в Казахстане тоже есть умельцы,но унас как в анекдоте: на необитаемом острове трое,американец, русский,казах. Надо как то выживать;амариканец-я разведу бычков на мясо,хорошо;русский-я займусь горшками посуда,огород ,лён одежда-хорошо;казах-а я ваш новый участковый!

[@situationalawarenes]

Fantastic! But you should try to catch the composite/plastic dust. It gets into the water and is a problem. Some foil on the ground, wet tissue, vacuum cleaner.

[@roypatterson9910]

Damn, that turned out fantastic!!! I'd love to have one of these! I wonder if he put fins underneath the boat towards the rear, which would help keep the boat from being able to spin out, and it'll make his turns much more stiff and not feel like you're sliding. It'll surely make it handle better, even in the straight away.

[@plane_guy6051]

I disagree because on those narrow waterways, being able to spin it around on a dime is a huge benefit. The whole boat is basically like a jet ski and looks like a riot.

[@asdmuzak]

You my friend are the best KZbinr, I'm so impressed. I love this channel. What is the white material you use so much of. Also, being a jet ski guy add some ride plates under the jets and you will be able to adjust them and stop the boat porposing. Or add some sponsons to the rear sides. Awesome work

[@gdxd7956]

Probably "PVC Foam Boards"

[@dovanthang]

Ngưỡng mộ tài năng của bạn. Thật sự rất tuyệt vời. Đây là lần đầu tiên tôi comment 1 kênh sau 14 năm tôi lập và sử dụng Youtobe 😮

[@petiohristov7104]

Perfect project and video!!!

[@yesiam1496]

You killed bro no more words Engineer .mechanic .carpenter. plumber welder. Pinter. stickerworker . Electrician.Moreover Harddworker Salute bro your efforts ❤️❤️❤️

[@FRYEGS6]

How many weeks did this project take to complete? Excellent work, nice fabrication skills. You are the man.

[@life4manic]

Молодцы! Трудяги ;) красота!

[@colin-manyeates-clan5221]

2 things, put on small hinged plate on the back to "stabilize" it, 2. you can make C cups that come down over the thrusters and deflects it to the front of the boat = reverse. You can make it mechanical easily and it may be slow to get it fully down but some reverse is better than no reverse. 3Rd :-} think about separate throttles connected yes but when you want to make even more sharper turns you can do so by adjusting throttle on one side verses the other side.. and with reverse you will be able to dock like a pro. Also I would consider a foot throttle addition so you can feel like a sports car and really control it and the power for jumping waves, 4 :-} consider putting the drivers console in the middle. You can reach both sides from there to cast or catch lines and still steer, I like balance whenever possible. When you have two people you can still reach all the controls and I would put a seat behind the center too for real drag racing. Also that means you can have four people on an adventure. Just be aware of the weight and strength values. (i would be fiber glassing both sides of every piece of everything!!! five times stronger...) Blessings

[@Damarius_L]

Feeling proud to watch you fix the engine starter 🔥 keep it up man 🔥 always support

[@sutannguyen8599]

Quá tuyệt vời..của sự đam mê Tột độ..mới có được nhiều sản phẩm của Cháu từ vật liệu Phế thảy đã vùi lấp nhiều năm Trong đống sét rỉ sắt..nhưng rồi lại trở thành một Sản phẩm đặc biệt cao cấp của Dân chơi Nhà giàu triệu Phú Dollars.. Đang nằm mơ để mua được.. Nhưng đặc biệt chỉ có 1-0-2 trên Thế giới hiện nay không đụng hàng..Chúc mừng Cháu đã thành công nhiều sản phẩm từ đồ phế liệu..lại trở thành một khối óc sáng tạo Thông minh hiện đại..tóm lại là chịu khó cần cù với trí nhớ Lạ kỳ..Chúc Cháu mạnh khỏe bình an hạnh phúc với tâm hồn đam mê vô hạn của Cháu Mr Hồ Thánh Chế..hãy giữ gìn sức khỏe nhé Con..❤🎉😊

[@phucnguyen6300]

1 từ thôi: Đẳng Cấp. Tay nghề cùng tư duy quá dị ❤🎉

[@tylermudge9118]

Still cracks me up the way you weld. It's even crazier that the welds look good! Good job mam keep it up

[@markbooe205]

I was waiting for part II. Completely Excellent!!! 👍

[@jstagzsr]

the way he NEVER organizes or separates or labels his screws and bolts on disassembly drives my ocd crazy!!!! i also never see him install new rings or bearings but his projects always seem to function flawlessly. he obviously knows something i dont!!

[@Canoby]

Perfect color for this sweet ride, this boat is giving me real 80s supercar vibes lol

[@AnthonyCelata]

Man you are so creative I'm surprised some big company hasn't picked you up to design their vehicles

[@EJ-ge4st]

I was thinking the same thing. Usually companies will snatch up any talent left in creative fabrication found on KZbin

[@CoD64778]

we never know he might have his own company already haha

[@xuphong2404]

@@EJ-ge4st ơ nơi này dù bạn có là thiên tài thì bạn vẫn sẽ thất nghiệp nếu bạn không chịu bỏ ra nhiều usd để được nhận

[@patra7217]

kzbin.info/www/bejne/sHzGkod8nK-eZ9U

[@jaebae5706]

This is inspiring I can’t even get up and wash my shoes lol

[@Haza3137]

Lmao same

[@geoffreymwangi6627]

The IQ of this guy it's unusual. Most telented guy in world he transform nothing to something.World need such people.Nice job dude.

[@TukangPerahukayu]

Hai sahabatku saya sangat terkesan sekali melihat kreatifitas dalam pembuatan speedboat yang begitu keren❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉

[@thomascarmichael6760]

That is one hot looking boat. The best part is it scoots like crazy. The lighting system is wild. You should be proud of what you created with thrown away items. Always enjoy watching your videos! Keep up the good work!

[@HypocriticYT]

Great skill and determination!!! I wish you were in Canada building custom boats 🚤

[@EinBick]

Thousands of channels where people struggle to build simple projects with modern CAD, 5 3D printers, croudsourced parts and CNC machines in modern and perfectly stocked workshops. Here is a guy that basically builds a boat from spare parts in his backyard. THIS is talent people.

[@ivecloptv]

Hi, I have just discovered some of your videos and you should ask for a job in any big boat or car or vehicle company, even in an airplane company. You are really talented and gifted as a mechanic and even mechanic designer.

[@juliogCyg]

¡Felicidades maestro!, una vez mas completamente sorprendido. Saludos desde México👏

[@techmarty3450]

Very cool build!! I wish I could be talented like you!! One thing I realized tho is that you look uncomfortable driving it since your window frame is at your eye level. I would make it smaller if its not a complicated or time consuming job. GREAT BUILD! Keep going at it!!

[@rbleisem]

Nice rework. Way easier to get in, now. Also safer on the back end, with no open screw. But I feel that if you want any real speed at night, you need a searchlight, that is pointed downwards, because the current headlights rise up when you speed up. That or mounting a night camera on the nose and a LCD screen to display what it sees, in the cockpit.

[@user-py1hz9ik2i]

Ông Hồ đã đăng ký cho bạn từ video đầu tiên trên kênh của bạn, bạn là một bậc thầy siêu phàm, sức khỏe và tuổi thọ đối với bạn cũng như sự thành công trong sáng tạo 🤝🇷🇺🇻🇳

[@dennis-tde]

Я тобой восхищаюсь. У тебя золотые руки 👍

[@JerseyFishing20]

Is there anything this man can’t do? What a legend!!

[@ingeniousway3186]

Mr. Ho Your a dad gum genius you make me want to go out and build a boat or something. Thoroughly enjoyable to see your creativity at work.

[@joeblackman100]

Great to wake up to see one of your videos, you have a natural gift for engineering and incredible resourcefulness

[@leonardomartins1262]

Imagina aqui no Rio de janeiro, parabéns ficou perfeito 🇧🇷👏🏿👏🏿👏🏿🙌🏿🙌🏿

[@linhgaming4404]

Có Diệp nào e xuống gặp 1 người a rất là tài năng.viet Nam rất là ngưỡng mộ chúc a luôn mạnh khỏe ạ❤

[@user-lc5ny3ri8q]

Ты просто чудо,самоделкин.Молодец!

[@dudi_fisherman]

Man, you are so inspiring, creative... It's unbelievable what a man is able to do even if he doesn't have to much money. Keep up the good work!! Greetings from Serbia!

[@matui6983]

That is extremely impressive. Engines are the perfect choice for a weapon like that. Well done well done well done.

[@sofiamuller8153]

the most beautiful ship I've seen so far. I hope you have a lot of fun with it with your friends. will you then produce the boat in series?

[@jerocaldon429]

Level... God hand wow Mr. Ho Thanh CHE you make the extremely hard look easy.

[@user-sl7xm8bq3h]

😮😮.. Show de bola...top...top ... você é um Artista cara !!! Eu sou da costa marítima de Vitória Espírito Santo e não tenho muitos opçães as ondas são altas e eu já procurei ver com os Marinheiro Oficiais e eles não mim recomendaram , mas quero ficar com tato com vocês , parabéns pelo o seu projeto ficou muito bom...fuiiii

[@craigcorbin4098]

How did you fix the damaged port on the cylinder? ( Love the content! ) Bạn đã sửa chữa cổng và piston bị hư hỏng như thế nào? (Thích nội dung!)

[@studiokarya]

Luar biasa cerdas, rapi, sangat kreatif, membuatku terkagum-kagum. Matur nuwun Berkarya terus bro

[@cantre1479]

Vô cùng tuyệt vời! Chàng trai tài hoa, đam mê và vô cùng sáng tạo!!! Chúc bạn ngày càng có nhiều sản phẩm tuyệt vời hơn nữa!!!🤝

[@TheBottlenose33]

Love watching you work and create awesome machines.

[@ninohanselakol4769]

It's just talent but also the knowledge and creativity he has is incredibly amazing. Good job man. Hats off

[@jimbo92107]

Maestro Ho! Sir, you are a true artist of the mechanical! Bravo! I wonder if you could make a push-prop float plane..?

[@3089io]

DIY motorsports from tropical asian folks is some of the best stuff. The creativity and style and just balls out insanity I see on the internet. Y'all really know how to do it up. This yacht is one of one and super cool.

[@farakievua8877]

Я восхищаюсь твоей работой! Мне очень нравится! Успехов тебе! Привет из Украины)

[@thuyvantv]

Quá đỉnh a ơi😍

[@pablor7095]

People with incredible skills. Amazing, brother.

[@agn855]

Mr_Ho: _"Watch out this amazing boat!!"_ Pacific Ocean Scientists: _"Never seen that high amount of micro-plastic in one water sample!!"_

[@mikecoffin820]

This is impressive AF but I’m concerned that if he brings up solid, his brain is going to end up on the shoreline wearing his hat.

[@renangiacomini2497]

Você é incrível, eu fico aqui sonhando em ter essas habilidades. Sucesso amigo!!!

[@carlosjimenezluque9883]

Amazing job !! 🙌🙌

[@slickman1953]

Do you draw up plans of some kind or is all this done on the fly?

[@donnysmith6676]

This build was magnificent just like the other one You are amazing God has created an angel your dad or someone in your family had to taught you this Were you either went to school or you just are gifted 🚤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

[@erikbraguim4288]

Irmão ótimo trabalho , gostei muito parabéns , projeto incrível

[@usub01]

Парень с золотыми руками невероятно привет из Екатеринбурга

[@dgarvisindestrus]

Классно сделано, не хватает подсветки чуть выше ватерлинии по периметру, тогда был бы эффект "парения над водой" 👍👍👍

[@damiann4734]

Thank you to your videos, they make me feel like there's no task is impossible when it comes to mechanical.

[@trashcahnistan8155]

This guy is living his best life. What a legend.