Paving An Entire Driveway (COMPLETE PROJECT)

Hey everyone! My buddies over at WCI asked if I could come film some laneways being paved and man was it cool! What do you guys think?
WCI: / wciottawa
KWC INSTAGRAM: / kwc2000
Make sure to SUBSCRIBE and LIKE and leave a comment!

[@KenWhiteConstruction]

Let me know down below if you want to see more paving content! I can do lots! Lemme know down below

[@Sicktrickintuner]

Ken White Construction Yep always love asphalt, here from London Ontario

[@dog_house875]

Yes please

[@DuBB900]

More!! Love it!

[@dillonteg3414]

Please more videos. I love your work and your ethics. Keep up the wonderful work out there.

[@MrJaggelles]

Yes

[@youtubestudent6484]

19:00 minutes. "Little details that matter" Boot mark in the mix. No compaction. Lol.

[@brettcarlow5779]

KZbin Student I’d hate to have a boot print

[@sckiller]

In fairness dale compacted over that spot at end of video.

[@John-lq7hs]

Good eye. I ran a paving crew for several years so one thing I can say is it’s hard to control 8 guys 😂 if I had a dime every time I did my job and 4 others and then did my final walk around and found a boot print or something stupid like that 🤬 Over all they did a nice job definitely above average.

[@Lazarus_]

Dale, what’s your favorite part of the job? Dale: *walks away* 😂

[@leoleon2232]

Paved for 30 years. Never seen anyone use a paver to grade a driveway.. That would really scratch the screed up..

[@bradwyrick4738]

I tried it once don’t like it

[@johnnyrebel11]

Ive seen come people actually have an older paver that they strictly use for grading base but i wouldnt ever use the same paver on base as i would on asphalt

[@bradwyrick4738]

Green Knoll Lawn Care laying base is common with an old paver he is talking about how they drug the driveway with the screed

[@RiverValleyAcres]

My old company use to do it every once in awhile. I don’t see how it would hurt it any worse than putting binder through it.

[@danagrey3534]

The company I used to work for, we used to do it with an old paver for base and finish grade stone... which we call 304 and 411 limestone here in Ohio. But we wouldn't do it with the same paver for paving a drive for fear of stone getting caught somewhere and ending up in the mat to dig out, fill in and rake leaving a seedy spot. Doing it the way they do it, isn't much worse than running asphalt through it, but definitely want a clean hot screed to start so I wouldn't recommend it.

[@peteragnel509]

Paving and next year you be ripping it up to replace the rotten colvert pipe lol

[@benc3699]

Learn more Canadian lingo here everyday, laneway = driveway, asphalt = ASH-Fault 😂

[@KenWhiteConstruction]

hahah had to change the. original title I put laneway, than realized when I was making my tags that most people on yt search drive way.

[@recklessgamers69]

Depends where you are I guess in southern ontario we always call it driveway

[@mknucarman]

Being in The US I have never heard of laneway before Ya learn something new everyday Lol

[@alco424]

Never heard it called a laneway before either......and I'm in Canada.

[@southaussiegarbo2054]

@@mknucarman in australia a laneway links 2 streets

[@Moxzot]

Asphalt not ashphalt, you were triggering me everytime you said it.

[@tylernapoletano8282]

Lmao yo im glad im not the only one

[@MrJTRfilms]

Golly same here. So annoying.

[@jrm88382]

Holy shit dude was driving me nuts too!

[@GarbageMan2002]

its a canadian thing lol we all say it or at least in ontario

[@tripjet999]

Next year's video: "Repairing the cracks in the driveway."

[@dztrbdgod]

Why?

[@velvetjones]

@@dztrbdgod asphalt is going to crack no matter what. However you can minimize it and make it last a lot longer by starting with a good base. If you want it to last as long as possible 18 to 24 inches and it needs to be compacted. When I say compacted I mean using a heavy roller not driving small equipment over it. I don't know how deep the base is but I would guess it's maybe 6 to 10 inches at most and since it wasn't fully compacted it's going to flex and move around a lot. It will settle in spots and the freeze/thaw cycles will move the base around quite a bit. When I say settle I mean the cars parking and driving on top of it will flex the asphalt and compact the base beneath. The asphalt will spring back but the gravel under it wont. That means there is a spot for water to sit between the asphalt and gravel that will freeze and expand causing it to crack. If you want a driveway to last you need a really thick base that is compacted very well. If the base is compacted well enough there is nothing under the pavement to move and allow cracking. Keep in mind that you need drainage along with a solid base or you will get a lot of water that will freeze and expand, nothing in the world can protect against that. The asphalt also needs to be about 4 to 6 inches thick since it's not going onto an already paved surface. Asphalt has a lot less strength than concrete and can flex much more so you need to start out with a thicker layer on fresh construction like this than if it was being laid over a surface that had already been laid. If you already had a good surface there you could most likely get away with a skim layer 1 or 2 inches thick and call it a day. The cost of doing it right would probably be double what the customer paid for this job. That is why nobody does it because it costs a heck of a lot more to do the job right the first time and 99% of people would rather save a little money and let the next homeowner deal with it. Meanwhile they can advertise "new driveway just laid down" when they put the home on the market or if they are using it as a rental property for a while. My parents neighborhood went through a plague of this over the last 20 years. Homeowner has a terrible driveway and spends $3000 to $4000 to get it "redone" and then they sell the house. Then 2 or 3 years later it's cracked all over and hunks are falling off the sides. My parents had their driveway dug out and fresh concrete put down and it was around $20,000 but it will last another 40+ years with nearly zero maintenance. Some of their neighbors have had to have their driveways dug out and repaved after 5 years because it wasn't done right the first time. The autobahn in Germany has an extremely thick base layer underneath it and the concrete is several feet thick. That is why 70 years later cars are still driving over a pretty smooth surface at 100+mph. You get what you pay for and putting the time and money in on the front end saves a lot of maintenance through the years. This job would likely be fine for 5 to 10 years if they would have compacted the base properly before they laid down the asphalt even as thin as the asphalt was laid. As it was done I agree 100% with tripjet999 in 12 to 24 months there will be a lot of huge cracks and grass growing in them. Asphalt is fine for paving but it costs less than concrete for a reason. It needs a lot more maintenance over its lifetime or it won't last. I have no problem with them and would have an asphalt driveway myself but it would have a thick, well compacted base and a good thick layer of asphalt. By the time I have spent enough money to do it right I might as well spend a few thousand more and use concrete then I don't have to worry about maintaining the asphalt. If I did that job there would have been about 24 inches of base that was compacted properly and 6 inches of asphalt. You would still need to clean and seal it every few years but it would be much more resistant to cracking and should last 15 or 20 years. Asphalt is petroleum based and will break down over time no matter how well you maintain it. The important thing is starting off the life of the driveway correctly so you don't have to spend that money (and more) every year down the line trying to keep it from falling apart because you didn't want to open the wallet from the start.

[@Gio-iw8co]

Wesley Jones my dad own a ashphalt company and what I have learned is it has to be thick and compact to prevent cracking for long periods of time

[@Erik0333]

Wesley Jones Longest comment ever! Lol. Well done!

[@edgargallardo9444]

Compacting good the base is very important for durability.

[@95netta]

i love watching these types of videos! keep it up. Your videos remind me of the other youtuber Andrew Camarata

[@jeremystaples8881]

Andrew has awesome videos as well.

[@danagrey3534]

I hear ya with Andrew and he reminds me of me when I started about his age. But damn he sure is hard on his equipment at times, but getting better! Yet, I give him a ton of credit as when I comment on his videos, I always give him good sound advice which he has pinned or highlighted a lot of them. He also normally responds to my comments. But that boy can fix anything! I did a lot of my own repairs until I was able to hire a mechanic. That is where he had me. Andrew does pretty damn good work and not afraid to try or test new things! Love his channel!

[@craiglindbloom6419]

A beautiful driveway completed by truly a group of professionals who not only know and understand, but love the work and finished product they provide for their customers. GREAT job guys. Did paving back in the 80's in Brandon, Manitoba. I too enjoyed it and the experience and joy from it has never been forgotten.

[@529291]

Paving in South Carolina! Good crew just a lot of unnecessary work 🥴

[@Mistypoo702]

I can tell you an employee like dale is irreplaceable to a small business

[@andrewkuenzli8673]

Dale has been working asphalt for 40 years and is still a laborer lol I’m sure they would be just fine

[@MichaelMulvey-hp3he]

It takes a man like that to make or break a small buisness

[@whiteviper1979]

​@@andrewkuenzli8673how the f#ck would you know what Dale is capable of do you know him personally? I'm willing too bet he knows more about paving then you give him credit for! Good hardworking experienced labor's are hard too find! BTW everyone is replaceable and loyalty nowaday's and yesterday's doesn't mean anything! If you don't pay I don't play and neither should anyone else! All go somewhere else that will give me what I'm worth if they are paying me shit I'm gone with the wind!

[@freepress8451]

The professional way, in UK there are gangs of foreigners selling tarmac driveways that are wafer thin and only last a couple of months

[@danagrey3534]

We have that here too in the State Nic. There is a big group of gypsies or what is known as the "travelers" based out of the Carolinas and super easy to spot! They have super fancy nice trucks, small paver like a Leeboy 8500, nice trailer and rollers. But yeah they rip people off all of the time and homeowners don't know any better! Like they tell them they are going to lay an inch and a half "loose" and then when compacted, they end up with an inch and a quarter, which like you said, in a few months it is breaking up or by next spring at the lastest.

[@coltongarber8087]

My best friend is going to teach me how to run. Heavy equipment

[@idadho]

We call those areas Driveways, in Calif, Idaho, Connecticut and New Hampshire.

[@JzimmaSRT]

Everyone in the world except for England and this guy call it a driveway lol

[@stephenlamarre8086]

Would love to see more paving work. Love how you took the video and the quality of the shots of the "PAVING" job was great. It also was great to see Dale the owner of WCI since I've seen his trucks roll in your yard for loam. Keep up the great work and less videos per week are better since they are more quality enriched!!!

[@dennisebrown9666]

loved the homemade tamp shoes.

[@eliseferrari8510]

god why is it peopple can never get it right its Asphalt there is no H

[@baileysconstruction7898]

Elise Ferrari at least I’m not the only person that goes nuts about people adding an “h” in asphalt

[@davidroberts2404]

Yep its not ashphalt its asphalt. Must be the Yankee mentality. My neighbor from Michigan calls it ashphalt lmao.

[@jaydenreynolds9829]

Yeah there is its asphalt

[@SuperEoin09]

Hi man, liking your videos. Trust me. As a coating plant batcher the customer will always complain if the tar/asphalt is too cold. They NEVER complain if it keeps their toes toasty. Especially in Scotland!!!!

[@KenWhiteConstruction]

Thank you! I appreciate that very much

[@floptime]

He's favourite part of the job is breathing in the freshly baked tarmac and 4:59pm lol😂 Love the custom boots though

[@salvadoramador1425]

Bro wearing shorts to work in asphalt 🤦🏽‍♂️anyways they need to learn how shovel asphalt cringe the whole video.

[@swmplvr]

hell yeah wear shorts to pave in ! are ya kidding me??

[@corneliusflorio1054]

I’ll pave in flip-flops And shorts that’s so short my balls would be hanging out....just soaking up all the heat from that hot asphalt sweat pouring down my but crack.. That’s how a real pavement man gets down

[@juliusbyers4188]

6/10 many reasons...1 dragging the (screed) bottom of the paver on gravel is not good, quick wear down and eventually bad smooth pulls in the future and money to fix! 2. Combo roller on driveway lol first time I have ever seen that but not horrible! 3. The joint or seam(driveway and road meet) whichever you prefer to call it is not very straight and clean but overall ok could have been leuted better! But overall I have definitely seen worse!

[@maverick4220]

Why use a skid loader to transfer the tarmac it seems to be unnecessary extra work when you could just reverse the dump truck into the paver and dump the tarmac in that way.

[@genedameier8746]

Maverick 42, They didn't have enough room for that. It was a short driveway. The dump truck would have been in the front yard across the street.

[@maverick4220]

@@genedameier8746 The dump truck has a tarmac shoot and before they moved the paver onto the driveway they could of took the paver of the flatbed drove it up to the dump trucks shoot poured the tarmac into the paver and then drove the paver onto the driveway and then do the same thing the second time round as the dump truck would of only been blocking the road for 5 minutes max. To me it seems more logical to do it that way therefore saving the extra work of using a spade to to transfer tarmac from the dump truck into the paver.

[@seanmorgan7839]

in northern canada we let gravel sit for 10-14 day be for we lay down black but looked good nice job

[@Victor-hc8xx]

That's interesting. I'm in the states and just today I was on a road that got milled, graded and paved all in a matter of 3 hours.

[@augustreil]

We have a guy here in Ct that waits 30-45 days of the homeowner driving on it, then paves. Says it keeps the wheel tracks from sinking in as little as possible.

[@scotabot7826]

Is Ashe-phalt a thing in Canada?

[@GarbageMan2002]

yes lol

[@ianhaggart1438]

Great video. Sure yous will get a lot more customers off of the back of this. You explain the job well. Pity yous are do far away from 🏴󠁧󠁢󠁳󠁣󠁴󠁿 really as iv a large driveway needing done 🙄😁 great team there by the way.

[@ghengisnghe]

How much profit from that job ? Got 6,7,8 men , fuel .

[@MCKICKZ]

There’s no need to level it with the paver.. more work for what?

[@MCKICKZ]

Bryan Lacount nice try

[@danagrey3534]

@@MCKICKZ No nice try Mike. Your asphalt is only as good as your base! Bryan is right. Maybe you're in the business of cutting corners, shoddy work and like callbacks? Just curious?

[@MightyMeehow]

"hello? yup End of the lane way, dont come up the property........Ken whites here"

[@richterlandscaping5348]

MightyMeehow finally a Letterkenny reference

[@MightyMeehow]

OMG! Im shocked you looked back to respond! I thought my reference would go unnoticed 😂

[@arthurturcot5880]

Pave it. And you have a great long weekend to 😀

[@angelahampton3482]

What questions should I ask my asphalt contractor before the work is started?

[@pimkoster1194]

They could do this in 1 hour with 6 men

[@eliteclassicdetailing]

Dales boot great he should market them to Australia ? Really great video to watch

[@southaussiegarbo2054]

Hello fellow down under person

[@FastEddieQ]

Very interesting, done paving for many years and never seen paving done this way😂😂😂... as far as nobody driving on it for 4 days, welllll that’s news to me, if you get good compaction while rolling it anyone can drive on it as long as they don’t park on it for a day or 2... good video, b

[@FastEddieQ]

But as someone comment, paver screeds aren’t for grading stone

[@eliteearthworksllc]

Pave it! This video was badass bro! The editing was amazing! Keep up the great work Taylor! Congrats on 7000 subs too! 👊🏻

[@KenWhiteConstruction]

Thanks buddy!!

[@randybrolo3128]

Round shovels are for digging.. should be using short handle square

[@KenWhiteConstruction]

Randy!

[@paveemall1387]

Combo rollers are finish rollers steel drum for breakdown but who cares 😂 looks great

[@DeterminedBeast]

The last place a combi roller should be used is finish. Breakdown and before finish is good but not for finish, the double steel takes out all lines left from rubber tire rollers and makes a uniform finish. Combi can be used as finish aslong as it's not leaving tire impressions.

[@paveemall1387]

Jordan Byrne no pal you hit with steel then you combi then you steel the last place a combi gose is on breakdown you destroy the mat hitting it with a combi for breakdown watch every highway contractor combi rollers made the job lazy combi dose not break down the tires cut the piss out of it you want the tires to bring the shine out on a finished mat by that time there should be no tire cuts and the front steel takes the small impression from the tire out that’s why it’s a combi roller or it would be steel all rubber and a smaller steel following facts not my own bull shit

[@dweebsmasher]

@@paveemall1387 on bigger jobs combi isnt even used its double steel breakdown rubber tire to follow and double steel on finish. the only time a combi ive seen used where im from is on small patches or for breakdown on smaller jobs or in tight areas, then hit with rubber followed by double steel. only time ive seen a combi on a highway job in my life, its being used strictly for approaches. honestly on anything small if your rollerman is leaving tire marks while using a combi he doesnt know what hes doing or is lazy and not hitting it enough/properly.

[@corneliusflorio1054]

You guys are both wrong a good tweaker On a set of tamp shoes Is the best way to get that asphalt finished and compact at 92% compaction 👌🏽 How does that one sound Fellers

[@kylenagle4960]

We had 1200 ton laid today in 7 hours on a state road 10 trucks there was a blacktop elevator we dumped in we call it the elephant it dumps into the paver PAVIN

[@KenWhiteConstruction]

That’s insane

[@thesoiney24]

Up in mn we have guys putting out 7-8000 ton in a day

[@1cummins4life65]

Alot of equipment for a job that small

[@1cummins4life65]

@@tallboy7736 forsure thats done legit very nice very nice equipment too

[@asconstruction4146]

I live in Pennsylvania and they are redoing the turnpike you would not believe how much asphalt they are laying it’s almost 20 inch’s thick doing it in 4 layers meanwhile you can not get any stone right now it’s all tied up

[@danfettig9438]

If you have to fine grade with the paver, you need a real operator on the skid steer. I’ve been around construction and paving for many years and never seen that before. The guy in the shorts is an accident waiting to happen, that asphalt will blister skin in an instant and it sticks to skin real well. Nice finished product, gotta give them that.

[@JuanHernandez-ox5tl]

You owe me $10,000. What ya think? Am I over charging?

[@KenWhiteConstruction]

I was going to give you 20k

[@docholliday6338]

Why not just back the dump truck up to the paver?

[@roryjones485]

Paveing great video Taylor something different I like it. We call it tarmac here in wales instead of asphalt

[@jimtodorovitch3389]

Did you say ASHFAULT? I Use ASPHALT I don't know what that other stuff is maybe it's made from ashes. How does it hold up on the driveway lol

[@edembich]

Paving from Missouri, USA!

[@kirk4462]

That’s a weiler paver.would have saved a lot of time and energy by putting stone in paver and then running over the stone. For those who may say it would hurt the paver it doesn’t. Asphalt is made out of stone .Looks like a nice job👍Nice equipment but I wouldn’t bother with the roller with tires on it.

[@ronwood9706]

Keep this kind of content coming👍🏾👍🏾

[@KenWhiteConstruction]

will do ron

[@danielporkar8523]

Pave it!! Have a great weekend!! I did something like that but at a large scale. We make the whole parking from a mall

[@KenWhiteConstruction]

that's insane!

[@colebenson2063]

I know it’s a CAT 😂

[@RoofusMurphy]

Only thing I would do differently is to get the roller on there as soon as possible. The plate tamper and roller should be in the garage and breaking down 30 seconds after the paver pulls off the pad. Absolutely no reason to leave the first matt unrolled until the second matt is done. Obviously leave a foot unrolled to match the seam but leaving the asphalt unrolled for longer than a couple of minutes is crazy to me. Unless it's 110 degrees outside?

[@Beamin-vt7jm]

Did they always bring in that crush grated stone to add as a base? Guys just paved our driveway use the existing dirt and rocks from the previous driveway they tore up. No graded stone

[@DeeStroyer-fg8lp]

you didnt get scammed..i agree with the other seasoned blacktop vets commenting here...i would say closer to $6-7000 id have charged ya. the drone thing though? actually its illegal without informing who youre filming, especially replaying it publicly. be careful

[@Tmarquise02]

Honestly, if you want to see the real paving is done, come watch us pave. This driveway doesn’t look good at all brother. Jr Davis Construction will show you the REAL way. Right now we are paving Universal Studios In Orlando. I’d love to show you if you’re interested man

[@maitrehauchecorne846]

I am 65 and started paving Helping My Dad in Our Family business when I was 15 earlier than that unofficially. It is hot work and hot material. Those short pants that are popular with Tweaker’s are OSHA violation’s. Those poor guys must not get paid much. One of them couldn’t afford a decent belt to hold up His pants or maybe He just has hips like Cochise. I agree with another comment that using the paver to lay base material is not the wisest thing to Do. If You don’t mind replacing expensive part’s often and contaminating the asphalt mix with residual base material and fines then Do it. The base should be dampened throughout its depth. If it is dry existing or dry imported, wetting it while working it to its finished grades and slopes will facilitate proper compaction. Over wetting can cause it to become muddy , requiring time for excess moisture to evaporate out. I like the comments from people all over the world. I am not a Jet setter. Few People in the asphalt paving business are. It is very competitive. If I went on a vacation to another Country I would enjoy watching other people do theis work or even participate. Don’t get too sensitive about My Prior Remarks either, they go with the territory when working on paving and construction Crews. In paving there are many variables and methods. Aggregates and mix designs can vary by geographical location and the geology of available materials . There are different grades of asphalt oil used in Hot Mix Asphalt Concrete. The methods and types of asphalt will differ from those used on Highway projects , commercial parking lots and secondary roads. In some area’s far from Hot Mix Plants , slow curing materials are used. They are made like regular Hot mix where the aggregates and sand are heated in a giant drum like a cement mixer with a giant torch burner roaring through its center. After the aggregates and sand are heated the oil is injected and is drawn into the mix by capillary action. The Heat keeps the material “ plastic “ and Workable. As it cools it becomes harder to work , blend ( make seamless joints ), roll and compact properly. There are emulsifiers in the oil that help with the heat in keeping it workable for a a few Hours on warm days . Cooler temperatures means transporting , laying and finishing ( shaping and compaction) more quickly. Hotter days are more forgiving and l am writing a book. The Asphalt Institute is a good source and reference for anyone in the trade . There is no substitute for experience.Even those with Engineering Degrees can and should learn from the old timer common laborer’s who have spent their lives doing this work. Even among competitors we have shop talk and attend seminars. I am not a Cat Salesman but swear by the brand , I have used and own many other brands and if You know what Your doing You can make anything work. I worked with a old guy who had graded roads using a mule drawn grader that was operated by turning large metal wheels that turned gears that raised and lowered the cutting edge and adjusted the pitch while He shouted Gee , Ho and Yeah to the team.

[@gaskammare]

11:14 is it fred footsweat or joe juicyfoot

[@DirtPerfect]

Paving nice video also

[@KenWhiteConstruction]

Thank you very much!

[@mike199836]

Do more paving videos

[@jacobstuart2065]

Personally I don’t recommend WCI. They messed up our driveway last year and was supposed to come out 2 months ago to fix his mistakes and now won’t return our phone calls. COCO paving or Cavanagh is the way to go.

[@Acen_Wyatt]

Why are you the only person there wearing a hard hat

[@KenWhiteConstruction]

cause im safe

[@johnsonbar5022]

Is there such a thing as a "floating" driveway? I'm about to have my driveway paved and I notice dirt with a bit of stone in it. I ask the contractor, "where is the crushed stone?" He tells me that the asphalt will be laid over the top of the dirt and stone, as a floating driveway. I never seen such a thing.(?)

[@dennisebrown9666]

Now when said about the Cat roller having better compaction with the tires, that's not the purpose of a rubber tire or pneumatic roller, its main purpose is to squeeze the heat out of the mat, by not only the weight of it but the rubber absorbs the heat so the steel drum rollers can compact it, the asphalt has 3 temp ranges when to breakdown, compact, and finish.

[@KenWhiteConstruction]

Thanks Dennis! Love the info!

[@shitmonkey]

I used to haul asphalt in double bottom bumps and I actually miss the smell of it

[@danr5239]

I can’t get a straight answer. I go to many different websites. My driveway just got re-paved today they say I can drive on it in 24 hours but other websites are saying I have to wait four days or even longer. Tomorrow is trash day and I’m afraid to walk on the payment to bring my trash down to the end of the driveway.

[@joaquinvasquez7923]

Awesome work!! Whatever tips you have, shoot them our way for our rakers over in Manteca, California- Arrow Construction!

[@jimmyramirez2009]

What happens to driveway if hours after new asphalt driveway got done it started raining on and off for couple days now I haven’t parked on it since Saturday July 10

[@slaterlinkous2521]

Out of 4 years of paving and growing up around it iv never seen anyone with those shoe things on🤣

[@koikingcollectibles]

These people are horrible 😅😅😅 I work for Italian pavers. Lol if I did half the stuff they did or moved as slow as they did I'd be done 😅😅😅😅

[@johnsonbar5022]

I have a contractor that has a paver that lays down the asphalt, and while the paver is sitting in my driveway waiting for the rain to stop, I notice a layer of oil in the bed of the paver where the asphalt is going to be. Is this going to create a problem for the asphalt to asphalt to adhere to itself and maintian a quality layer?

[@angloguardian8273]

Why do you keep calling it "Ashphalt"? It is Asphalt.....As-phalt...Not Ashphalt

[@KenWhiteConstruction]

just how I say it

[@bryanvelezocampo3796]

Did he just say that weiler paver is a cat paver? lmaooo and why is 25MM or 19MM being used on a driveway

[@redbulls9374]

First time i see someone grade a drive way with the screed of the paver 😳 and i have been doing this for over 8 years from driveways to highways

[@jameskendrick7746]

Dad and me have never seen something like that before and dad has been at it for 30 something years 😂

[@Bigmatt84]

Is that paving company still in business I hit the Instagram link and not valid anymore I'm just wondering

[@jackefrost]

We don't do driveways like that here we use a 3/4" stone binder coat then use a fine coat on top that would be considered a driveway that will not last here , they did a nice job but should of did two coarses .

[@tyrekejenkins726]

jackefrost yup. Won’t last a year

[@craigseaman332]

Hit me up if you want your screed and extensions adjusted. I could get that pulling more uniform.

[@RadarRecon]

Gotta wonder with all the heavy equipment hours and man hours, how much this "pavin'" cost.

[@BrandonGarbage23Trucks247]

18:42 Did you know my friend Darryl Anderson drives a Skidsteer!

[@glentrodglen3176]

My family owned a large asphalt paving company in Florida. I've never seen a paver used to grade.

[@jameskendrick7746]

You and me both man, the only thing I’ve done is laying that dense grade down like I would asphalt but thats only for certain scenarios.

[@auroraborealis5030]

Whats ur favourite part of the job.. 5 o clock lol.. We all love that part i guess.. Honest man :D

[@brainclerk4431]

In the UK paving is either blocks or slabs ! we call what your doing Tarmac or as you know it " asphalt "

[@BrianB14471]

It's only tarmac if it's at the airport.

[@benjerry3523]

im my country and i dont like to mention its name ,public company has the technology to make the asphalt cracking in the same day when it done , a kind of accelerating process hhhhhhhhhhh

[@codylamoureux-mohan4246]

Stop calling that drive way a laneway, u can get a ticket for parking in a laneway, that is a driveway my guy..

[@cwiggy7622]

Paving

[@itsyomero3902]

here in Michigan we put down 4 thousand tons of asphalt a day 1 crew 1 plant!

[@KenWhiteConstruction]

That is wild

[@maryfedchyk6969]

PAVE IT!! Loved this. Learned so much. Liked Dale's ingenuity --- maybe he should go on Dragon's Den?

[@KenWhiteConstruction]

he should haha!

[@shawnflemmings1559]

Paving is everything to me, and I I'll pave for the rest of my life!!🙏💪💯

[@elmtreeroad]

Hey man I noticed the Ontario plate. I’m in the GTA in Bowmanville looking to get my driveway repaved and widened. Anyone out my way you could recommend? Thanks

[@jruss9109]

"Dale what's your favorite part of the job?" you know he really wanted to say whenever my lips touch that beer can for the first time of the day lol

[@KenWhiteConstruction]

Hahahahah that’s exactly what he wanted to say

[@swmplvr]

looking at the reveal at the garage door looks like you only put down maybe 1 1/2 ''@ the door and went to maybe 2 1/2''.. . waste more time and money using a skid steer to put the black top into the paver??!! Back the truck into the paver and JUST DUMP IT!! What reason would there be to not have roller in garage so it can get on the 'ash fault'right away.?. the joint looks like azz! No key cut @ the road to tie it in??? The edges of the driveway they obviously let the black top roll down over the item 4 and tamped it to make it look thicker !! MY FAVORITE PART IS AT 18:59 you can see his boot leaves an imprint in the ash fault (lol) meaning there is no way that it is compacted !!! The roller left lines all over!! ...this is like gypsy paving 101... dumb!! We would be embarrassed to do a job like this !! anyone looking for a black top company probably should find someone else... just my .02

[@dennisadorno6721]

Cancer has put me on the sidelines, Man do I miss that smell!!!! Nice pneumatic roller!

[@JasSinghGrewal]

Great video. Great equipment. Great crew.

[@garretthyder8735]

Sick video! I’m paving 200tons in the morning

[@JuanRuiz-je6cb]

If you are going to grade the base with the paver then just put the base in the machine just saying

[@HavocDH]

Can tell they arnt union. I’m seeing all these mistakes and things that could be adjusted

[@gloves259]

2:05 "i do know that its a cat!, so thats good, on brand" NO, its not a cat paver. It's a weiler paver

[@timfischer]

Cat engine

[@pickles9774]

The smell and toxic shit you put into your property is just not worth it. Concrete is better.

[@tylerpittmon7936]

I think more content of your partnership with other companies would be legit. Show everyone it’s not always about competing against one another in this industry. #PavIt

[@Uticagreens]

Paving with custom dancing paver shoes!

[@KenWhiteConstruction]

those shoes were MINT

[@popmccoy3454]

the bloke with the wooden shoes walks right across the pavement leaving prints, and the roller did couple of passes and parked up, ????? Should be able to use driveway the next day, if compacted and rolled off correctly. Hope they give construction warranty. Rushed job.

[@thatdudedizz]

I spent way yo long trying to figure out what a laneway was 🤦‍♂️ we pave driveways here in Nc lol, and we use ASSPHALT. Not ASPHALT lol...its the little differences in diff countries that make me laugh.